A vehicular exterior door handle assembly includes a base portion configured to mount at a door of a vehicle, a handle portion extending from the base portion, and an electronic switch disposed within the handle portion. The handle portion includes (i) a fixed portion that, with the base portion mounted at the door of the vehicle, extends outward at the door of the vehicle, and (ii) a movable portion disposed within the fixed portion. When the handle portion is grasped by a user, the movable portion moves to actuate the electronic switch. With the base portion mounted at the door of the vehicle, and when the electronic switch is actuated, the electronic switch actuates a latching mechanism of the door to unlock, lock and/or open the door.
E05B 81/76 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées
E05B 85/18 - Poignées pivotant autour d'un axe parallèle au battant le manche de poignée longitudinal pivotant autour d’un axe parallèle à l’axe longitudinal de la poignée
2.
INTERIOR REARVIEW MIRROR ASSEMBLY WITH FULL SCREEN VIDEO DISPLAY
A vehicular dual-state interior rearview mirror assembly includes a mirror head that accommodates an electrochromic mirror reflective element. A video display device is disposed behind a viewable reflective region of the mirror reflective element. With the mirror assembly operating in a first state, the video display device does not display video images at the display screen and the driver of the vehicle views rearward via reflection at the viewable reflective region. With the mirror assembly operating in a second state, the video display device displays video images at the display screen for viewing by the driver. A touch sensor is disposed at an overhang region of the reflective element behind the front substrate and below the video display device. The video display device is operated responsive at least in part to a touch event at the first surface of the front substrate of the electrochromic mirror reflective element.
A vehicular exterior door handle assembly includes a base portion configured to mount at an exterior door handle region of a vehicular door, a handle portion, and a sensing device operable to sense presence of a person's fingers in a pocket region behind the lower portion of the handle. The handle portion is pivotable between a non-deployed orientation, where an outer surface of the handle portion is coplanar with an outer surface of the vehicular door at the exterior door handle region, and a deployed orientation, where the handle portion is pivoted inward into a door handle pocket within the vehicular door. With the handle in the deployed orientation and when a person's fingers are in the pocket region, the sensing device senses presence of the person's fingers at the pocket region and triggers an actuator of the vehicular exterior door handle assembly to unlatch the vehicular door.
E05B 81/76 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées
B60Q 3/267 - Poignées de portière; Poignées de maintien
B60R 25/20 - Moyens pour enclencher ou arrêter le système antivol
E05B 85/18 - Poignées pivotant autour d'un axe parallèle au battant le manche de poignée longitudinal pivotant autour d’un axe parallèle à l’axe longitudinal de la poignée
A vehicular driver monitoring system includes a camera disposed at an interior rearview mirror assembly within a cabin of a vehicle and viewing a driver operating of the vehicle. Image data captured by the camera is transferred to and is processed at an electronic control unit (ECU). The vehicular driver monitoring system, via processing at the ECU of image data captured by the camera, determines posture of the driver operating the vehicle. The vehicular driver monitoring system, based at least in part on a comparison between the determined posture of the driver and a proper posture stored in memory, determines improper posture of the driver. The proper posture stored in memory is determined based at least in part on a determined head position of the driver relative to the interior rearview mirror assembly of the vehicle.
B60W 50/16 - Signalisation tactile au conducteur, p.ex. vibration ou augmentation de la résistance sur le volant ou sur la pédale d'accélérateur
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
B60W 40/08 - Calcul ou estimation des paramètres de fonctionnement pour les systèmes d'aide à la conduite de véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier liés aux conducteurs ou aux passagers
G06V 20/59 - Contexte ou environnement de l’image à l’intérieur d’un véhicule, p.ex. concernant l’occupation des sièges, l’état du conducteur ou les conditions de l’éclairage intérieur
A vehicular exterior rearview mirror assembly includes a mirror head and a mounting base configured to mount the mirror assembly at a side of a vehicle. The mirror head accommodates a reflective element and an indicator module. With the vehicular exterior rearview mirror assembly mounted at the side of the vehicle, and responsive to actuation by a driver of the vehicle of a turn signal input of the plurality of inputs, the indicator module projects a turn signal icon onto the ground proximate the side of the vehicle. With the vehicular exterior rearview mirror assembly mounted at the side of the vehicle, and responsive to another input of the plurality of inputs, the indicator module projects another icon onto the ground proximate the side of the vehicle. The other icon projected onto the ground is a different color than the turn signal icon projected onto the ground.
B60R 1/06 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule
B60Q 9/00 - Agencement ou adaptation des dispositifs de signalisation non prévus dans l'un des groupes principaux
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
A vehicular exterior rearview mirror assembly includes a mirror head accommodating a mirror reflective element and an illumination module, which includes a light source, a first mask, and a second mask. When the light source is powered, emitted light that passes through the first mask is a first color and emitted light that passes through the second mask is a second color. With the mirror assembly mounted at a vehicle, and when the light source is powered to emit light, light emitted by the light source passes through the first mask to project a first projected image onto a ground region and passes through the second mask to project a second projected image onto the ground region. The first projected image includes a first logo portion having the first color, and the second projected image includes a second logo portion having the second color.
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60R 1/06 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
F21S 43/20 - Dispositifs de signalisation spécialement adaptés à l’extérieur des véhicules, p.ex. feux de freinage, feux clignotants indicateurs de direction ou feux de recul caractérisés par des réfracteurs, des glaces de fermeture transparentes, des guides ou des filtres de lumière
F21S 43/50 - Dispositifs de signalisation spécialement adaptés à l’extérieur des véhicules, p.ex. feux de freinage, feux clignotants indicateurs de direction ou feux de recul caractérisés par des composants esthétiques non prévus ailleurs, p.ex. des enjoliveurs, des parois de séparation ou des couvercles
F21V 5/04 - Réfracteurs pour sources lumineuses de forme lenticulaire
F21V 9/08 - CARACTÉRISTIQUES FONCTIONNELLES OU DÉTAILS FONCTIONNELS DES DISPOSITIFS OU SYSTÈMES D'ÉCLAIRAGE; COMBINAISONS STRUCTURALES DE DISPOSITIFS D'ÉCLAIRAGE AVEC D'AUTRES OBJETS, NON PRÉVUES AILLEURS Éléments modifiant les caractéristiques spectrales, la polarisation ou l’intensité de la lumière émise, p.ex. filtres pour réduire l’intensité de la lumière
G03B 29/00 - Combinaisons d'appareils photographiques, de projecteurs ou d'appareils de tirage photographique avec des appareils non photographiques et non optiques, p.ex. montres ou armes; Appareils ayant la forme d'un autre objet
7.
METHOD FOR ASSEMBLING AN ELECTROCHROMIC MIRROR REFLECTIVE ELEMENT
A method for assembling an electrochromic mirror reflective element includes providing front and rear glass substrates, disposing a transparent electrically conductive coating at a second surface of the front glass substrate, and disposing an electrically conductive coating at a third surface of the rear glass substrate. The front and rear glass substrates are joined via a perimeter seal and an electrochromic medium is disposed within an interpane cavity established between the front glass substrate and the rear glass substrate and bounded by the perimeter seal. With the front glass substrate joined with the rear glass substrate, and with the electrochromic medium disposed within the interpane cavity, the first and second perimeter edges are ground to round the first and second perimeter edges to provide a rounded perimeter edge of the electrochromic mirror reflective element that has a radius of curvature of at least 2.5 mm.
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
A vehicular exterior rearview mirror assembly includes a mirror head accommodating a mirror reflective element, a support structure configured for attachment at a side of a vehicle, and an adjustment mechanism operable to move the mirror head along the support structure between a retracted position and an extended position. A shutoff device includes a base portion and a movable portion movably disposed at the base portion. With the adjustment mechanism operating to move the mirror head along the support structure, the shutoff device stops movement of the mirror head toward the retracted position responsive to the movable portion engaging a first electrical element at a first end region of the base portion, and stops movement of the mirror head toward the extended position responsive to the movable portion engaging a second electrical element at a second end region of the base portion.
B60R 1/078 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule montés de façon à être écartés en bloc latéralement, p.ex. quand le véhicule tire une remorque
B60R 1/07 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique
9.
Slider window assembly with movable panel drive system
A vehicular slider window assembly includes a frame portion, a fixed window panel fixed relative to the frame portion, and a movable window panel. A drive system is operable to move the movable window panel between an opened position and a closed position. The drive system includes (i) a housing attached at the fixed window panel, (ii) a drive motor disposed in the housing, (iii) a threaded shaft disposed in the housing and rotatably driven by the drive motor, (iv) a connecting element that threadedly receives the threaded shaft therethrough and (v) a window connector that is affixed to the movable window panel and that pivotally connects to the connecting element. Rotation of the threaded shaft imparts a translational movement of the connecting element along the threaded shaft to move the movable window panel between the opened and closed positions.
B60J 1/00 - Fenêtres; Pare-brise; Leurs accessoires
B60J 1/18 - Fenêtres; Pare-brise; Leurs accessoires disposés à l'arrière du véhicule
E05F 15/652 - Mécanismes pour battants mus par une force motrice utilisant des actionneurs électriques utilisant des électromoteurs rotatifs pour battants à coulissement horizontal manœuvrés par des mécanismes à écrou et vis
H05B 3/86 - Dispositions pour le chauffage spécialement adaptées à des surfaces transparentes ou réfléchissantes, p.ex. pour désembuer ou dégivrer des fenêtres, des miroirs ou des pare-brise de véhicules les conducteurs chauffants étant noyés dans le matériau transparent ou réfléchissant
A vehicular communication system includes a near field communication device disposed at a vehicle. Responsive to a near field communication-enabled device being within a threshold distance of the vehicle, the near field communication device wirelessly receives a wakeup near field communication from the near field communication-enabled device. Responsive to the near field communication device wirelessly receiving the wakeup near field communication from the near field communication-enabled device, the near field communication device (i) wakes up and (ii) determines whether the near field communication-enabled device is an authorized device. Responsive to determining that the near field communication-enabled device is an authorized device, the near field communication device authenticates the near field communication-enabled device. Responsive to authentication of the near field communication-enabled device, and with the near field communication-enabled device being within the threshold distance to the vehicle, an electrically operable accessory of the vehicle is electrically operated.
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60Q 1/00 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet
B60Q 1/32 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer les côtés du véhicule
B60R 25/01 - VÉHICULES, ÉQUIPEMENTS OU PARTIES DE VÉHICULES, NON PRÉVUS AILLEURS Équipements ou systèmes pour interdire ou signaler l’usage non autorisé ou le vol de véhicules agissant sur des systèmes ou des équipements de véhicules, p.ex. sur les portes, les sièges ou les pare-brises
B60R 25/20 - Moyens pour enclencher ou arrêter le système antivol
B60R 25/24 - Moyens pour enclencher ou arrêter le système antivol par des éléments d’identification électroniques comportant un code non mémorisé par l’utilisateur
A cabin monitoring system includes an interior rearview mirror assembly including a mirror head having a mirror reflective element that includes (i) a planar glass substrate, (ii) a transflective mirror reflector at the glass substrate and (iii) a light absorption film including a polarizer film. A camera accommodated by the mirror head views through the reflective element. A light emitter accommodated by the mirror head emits near infrared (NIR) light through the reflective element. The light absorption film attenuates greater than 60 percent of visible light and less than 30 percent of NIR light incident on the light absorption film and transmits less than 40 percent of visible light and greater than 70 percent of NIR light through the light absorption film. The camera captures image data representative of NIR light emitted through the reflective element and reflected from the interior cabin of the vehicle back through the reflective element.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
H04N 23/21 - Caméras ou modules de caméras comprenant des capteurs d'images électroniques; Leur commande pour générer des signaux d'image uniquement à partir d'un rayonnement infrarouge à partir du rayonnement infrarouge proche [NIR]
H04N 23/57 - Caméras ou modules de caméras comprenant des capteurs d'images électroniques; Leur commande - Détails mécaniques ou électriques de caméras ou de modules de caméras spécialement adaptés pour être intégrés dans d'autres dispositifs
12.
INTERIOR REARVIEW MIRROR ASSEMBLY WITH FULL MIRROR VIDEO DISPLAY
A vehicular interior rearview mirror assembly includes a mirror head pivotally adjustable about a mirror support. The mirror head includes a video display device disposed rearward of a prismatic mirror reflective element having a transflective mirror reflector. A touch sensor is disposed at the prismatic mirror reflective element and is associated with circuitry at a flexible printed circuit of the video display device. The video display device is operable to display video images captured by a rearward viewing camera of the vehicle. Light emitted by the video display device passes through the transflective mirror reflector for viewing of displayed video images by the driver of the vehicle viewing the prismatic mirror reflective element. The reflective region of the transflective mirror reflector of the prismatic mirror reflective element reflects at least 40 percent of visible light incident at the front side of the prismatic mirror reflective element.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/00 - Dispositions pour la visibilité optique; Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d’images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
13.
VEHICULAR SIDE DOOR WITH INTEGRATED BASE FOR EXTERIOR MIRROR
A vehicular exterior rearview mirror system includes a vehicle door having an inner sheet metal portion and an outer sheet metal portion. A base bracket includes (i) a body portion, (ii) a mirror mounting portion that extends from the body portion and (iii) an attaching portion that extends from the body portion. The attaching portion is attached at the inner sheet metal portion of the vehicle door. The body portion of the base bracket is partially disposed at an interior portion of the vehicle door between the inner sheet metal portion and the outer sheet metal portion. The mirror mounting portion extends outboard of the outer sheet metal portion from the body portion. A mirror head is attached at the mirror mounting portion of the base bracket. The mirror head includes a mirror reflective element.
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
14.
VEHICULAR CLOSURE OPENING DEVICE WITH PUSH TO ACTUATE FUNCTION
A vehicular exterior door handle assembly includes a base, a handle, and a deployment mechanism operable to move the handle between a recessed position and a deployed position. The deployment mechanism includes a return cam biased in a first direction relative to the base. The deployment mechanism, with the handle in the recessed position, secures the return cam relative to the base. The handle is manually movable beyond the recessed position away from the deployed position to actuate the deployment mechanism. The deployment mechanism, responsive to being actuated, releases the return cam and the return cam moves in the first direction to move the handle toward the deployed position. The handle is manually movable beyond the deployed position away from the recessed position to actuate a latch of the door. The deployment mechanism, responsive to the handle actuating the latch, moves the handle toward the recessed position.
E05B 81/04 - Serrures de véhicule actionnées par une force motrice caractérisées par le type d´actionneur utilisé électrique
E05B 85/16 - Poignées pivotant autour d'un axe parallèle au battant le manche de poignée longitudinal pivotant à une extrémité autour d’un axe perpendiculaire à l’axe longitudinal de la poignée
15.
VEHICULAR DRIVER MONITORING SYSTEM WITH CAMERA DISPOSED BEHIND PRISMATIC MIRROR ELEMENT OF INTERIOR REARVIEW MIRROR ASSEMBLY
A vehicular cabin monitoring system includes an interior rearview mirror assembly having a mirror head that accommodates a prismatic mirror reflective element. A camera is accommodated by the mirror head. The mirror reflective element is adhesively attached at a mirror back plate of the mirror head. An optically clear adhesive (OCA) and a neutral density (ND) filter are disposed between the mirror back plate and a mirror reflector coating disposed at a rear side of the mirror reflective element. The camera views through (i) the OCA, (ii) the ND filter, (iii) the mirror reflector coating of the mirror reflective element, and (iv) the glass substrate of the mirror reflective element. With the interior rearview mirror assembly attached at an interior portion of a vehicle, image data captured by the camera is processed at an electronic control unit (ECU) for a cabin monitoring function.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
G06V 20/59 - Contexte ou environnement de l’image à l’intérieur d’un véhicule, p.ex. concernant l’occupation des sièges, l’état du conducteur ou les conditions de l’éclairage intérieur
A vehicular video camera display system includes an interior rearview mirror assembly having a casing and an electrochromic reflective element, with a video display device disposed in the casing behind the electrochromic reflective element. With the interior rearview mirror assembly disposed at the in-cabin side of a windshield of a vehicle, a video display screen of the video display device is operable to display video images that are viewable through the electrochromic reflective element by a driver of the vehicle. Image data captured by a rearward-viewing video camera is communicated as a digital signal from the rearward-viewing video camera via a cable to control circuitry disposed at the interior rearview mirror assembly. The video display device displays video images that are derived, at least in part, from image data communicated via the cable from the rearward-viewing video camera to the control circuitry disposed at the interior rearview mirror assembly.
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
G02F 1/157 - Association structurelle des cellules avec des dispositifs optiques, p.ex. des réflecteurs ou des dispositifs d’éclairage
H04N 23/63 - Commande des caméras ou des modules de caméras en utilisant des viseurs électroniques
H10K 59/50 - OLED intégrées avec des éléments de modulation de lumière, p. ex. avec des éléments électrochromes, des éléments photochromes ou des éléments à cristaux liquides
H10K 59/65 - OLED intégrées avec des capteurs d'images inorganiques
17.
VEHICULAR VISION SYSTEM WITH MIRROR DISPLAY FOR VEHICLE AND TRAILER CAMERAS
A vehicular vision system includes an electronic control unit (ECU), a plurality of exterior viewing vehicle cameras that capture image data and provide captured image data to the ECU. When the vehicle is towing a trailer, a rearward-viewing trailer camera captures image data and provides captured image data to the ECU. A video mirror display screen is disposed at an interior rearview mirror assembly of the vehicle and is operable to display video images derived from video image data provided from the ECU. The mirror assembly is adjustable between a mirror mode and a display mode. The mirror assembly, when in the display mode, is operable by the driver of the vehicle to display at the video mirror display screen (i) a single image display of video images, (ii) a dual image display of video images or (iii) a three image display of video images.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
B60R 1/26 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision prédéterminé vers l’arrière du véhicule
B60R 1/25 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision prédéterminé vers les côtés du véhicule
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
H04N 23/90 - Agencement de caméras ou de modules de caméras, p. ex. de plusieurs caméras dans des studios de télévision ou des stades de sport
H04N 5/262 - Circuits de studio, p.ex. pour mélanger, commuter, changer le caractère de l'image, pour d'autres effets spéciaux
H04N 23/63 - Commande des caméras ou des modules de caméras en utilisant des viseurs électroniques
A vehicular interior rearview mirror assembly includes a mirror head adjustable about a mounting base configured to attach at an interior portion of a vehicle. The mirror head includes a mirror reflective element. The mounting base is configured to attach at the interior portion of the vehicle via a threaded fastener. The threaded fastener includes a head end and a threaded end that threadedly engages the interior portion of the vehicle. A compressible component is disposed between the head end of the threaded fastener and the mounting base. With the mounting base attached at the interior portion of the vehicle, and responsive to movement of the mounting base relative to the threaded fastener and the interior portion of the vehicle, the compressible component at least partially compresses to accommodate movement of the mounting base.
A vehicular exterior rearview mirror system includes an exterior rearview mirror assembly configured for attachment at a vehicle and an electrically-operable actuator. An exterior mirror head is movable relative to an exterior portion of the vehicle via operation of the actuator. The exterior mirror head accommodates an exterior mirror reflective element attached at an attachment plate. A heater pad is disposed between the exterior mirror reflective element and the attachment plate. An outermost side of the exterior mirror reflective element is exposed to and is viewable by a driver of the vehicle and is contactable. The attachment plate includes wall structure that spans a perimeter circumferential edge of the exterior mirror reflective element. No part of the exterior mirror head encroaches onto the outermost side of the exterior mirror reflective element. No part of the exterior mirror head overlaps the outermost side of the exterior mirror reflective element.
B60R 1/07 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique
B60R 1/062 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
20.
VEHICULAR ELECTROCHROMIC MIRROR REFLECTIVE ELEMENTS
A plurality of vehicular electrochromic mirror reflective elements includes first and second vehicular electrochromic mirror reflective elements, each having a respective planar rear glass shaped substrate and a respective planar front glass substrate. The planar front glass shaped substrates are cut out from a planar glass sheet. Each planar rear glass shaped substrate is joined with a respective planar front glass substrate portion of the planar glass sheet via a respective perimeter seal. With the planar rear glass shaped substrate joined with the planar front glass shaped substrate, the circumferential perimeter cut edge of the planar front glass shaped substrate and the circumferential perimeter cut edge of the planar rear glass shaped substrate are processed to provide a circumferential rounded perimeter edge of the respective vehicular electrochromic mirror reflective element having a radius of curvature of at least 2.5 mm.
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
C03C 27/06 - Liaison verre-verre par des procédés autres que la fusion
C03C 17/36 - Traitement de surface du verre, p.ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement avec au moins deux revêtements ayant des compositions différentes un revêtement au moins étant un métal
21.
VEHICULAR VISION SYSTEM WITH DRIVER MONITORING CAMERA AT INTERIOR REARVIEW MIRROR ASSEMBLY
A vehicular vision system includes an interior rearview mirror assembly having a mirror head adjustable about a mounting base configured to attach at an interior portion of a vehicle. A driver monitoring camera is accommodated by the mirror head and moves in tandem with the mirror head when the mirror head is adjusted relative to the mounting base to adjust a driver's rearward view. At least one near infrared light emitter is accommodated by the mirror head and is operable to emit near infrared light toward a head region of the driver of the vehicle. Image data captured by the driver monitoring camera is processed to determine driver attentiveness and/or driver drowsiness. The vehicular vision system may adjust processing of the captured image data to accommodate adjustment of the mirror head when the driver adjusts the mirror head to adjust his or her rearward view.
A vehicular exterior door handle assembly includes a base portion configured to mount at a door of a vehicle, and a handle portion. The base portion has a longitudinal axis that extends along a length dimension of the base portion and a lateral axis that extends laterally across the vehicle. The handle portion is movable along the lateral axis relative to the base portion between a recessed position and a deployed position. An actuator, when operated, imparts translational movement of a sliding element along the longitudinal axis relative to the base portion. As the sliding element moves along the longitudinal axis relative to the base portion, the sliding element imparts movement of the handle portion along the lateral axis between the recessed position and the deployed position according to movement of the sliding element along the longitudinal axis.
A vehicular cabin monitoring system includes an interior rearview mirror assembly configured for attaching at an interior portion of an equipped vehicle and having a having a mirror head accommodating a driver monitoring camera and first and second near infrared light emitters. When the equipped vehicle is a left hand drive vehicle, a beam of light emitted by the first near infrared light emitters is directed toward a driver-side front seating location of the left hand drive vehicle when the first near infrared light emitter emits near infrared light for a driver monitoring function. When the equipped vehicle is a right hand drive vehicle, a beam of light emitted by the second light emitting element is directed toward a driver-side front seating location of the right hand drive vehicle when the second near infrared light emitter emits near infrared light for the driver monitoring function.
B60R 1/30 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules fournissant une vision dans le spectre non visible, p.ex. une vision nocturne ou infrarouge
B60R 1/29 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone à l’intérieur du véhicule, p.ex. pour visualiser les passagers ou le chargement
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
G06V 20/59 - Contexte ou environnement de l’image à l’intérieur d’un véhicule, p.ex. concernant l’occupation des sièges, l’état du conducteur ou les conditions de l’éclairage intérieur
G06V 40/20 - Mouvements ou comportement, p.ex. reconnaissance des gestes
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
24.
VEHICULAR INTERIOR REARVIEW MIRROR WITH INFRARED FILTERING VIA LIGHT SENSOR AND PROCESSING
A vehicular interior rearview mirror system includes an interior rearview mirror assembly having a mirror head adjustable relative to a mounting base. The mirror head includes a variable reflectance electro-optic mirror reflective element. A glare light sensor is disposed at the mirror head and captures sensor data representative of visible light and near infrared light passing through the variable reflectance electro-optic mirror reflective element. The vehicular interior rearview mirror system determines a near infrared light component of the captured sensor data. Based on processing of the captured sensor data, the system controls dimming of the variable reflectance electro-optic mirror reflective element. The system does not rely on the determined near infrared light component of the captured sensor data when controlling dimming of the variable reflectance electro-optic mirror reflective element.
A method for assembling a vehicular interior rearview mirror assembly includes providing a mirror mount and a mirror head. The mirror head includes a transparent mirror frame and a mirror reflective element accommodated at the transparent mirror frame. The transparent mirror frame has a patterned front side having a plurality of channels established thereat and a rear side opposite the patterned front side. An illumination source is provided at the mirror head. The patterned front side of the transparent mirror frame is patterned to reflect light emitted by the illumination source, when powered, so that an illumination pattern is visible to a person viewing the rear of the transparent mirror frame. The mirror head is pivotally mounted at the mirror mount.
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 11/02 - Autres aménagements pour tenir ou monter des objets pour postes radio, de télévision, téléphones, ou objets similaires; Disposition de leur commande
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
B29C 45/14 - Moulage par injection, c. à d. en forçant un volume déterminé de matière à mouler par une buse d'injection dans un moule fermé; Appareils à cet effet en incorporant des parties ou des couches préformées, p.ex. moulage par injection autour d'inserts ou sur des objets à recouvrir
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
26.
SLIDER WINDOW ASSEMBLY WITH MOVABLE PANEL DRIVE SYSTEM
A vehicular slider window assembly includes a frame portion having an upper rail and a lower rail, a fixed window panel, and a movable window panel that is movable along the rails between an opened position and a closed position. A drive system is operable to move the movable window panel between the opened position and the closed position. The drive system includes a single flexible drive element that, when the drive system is actuated to move the window panel in one direction, the flexible drive element pulls the movable window panel along the rails, and when the drive system is actuated to move the window panel in the opposite direction, the flexible drive element pushes the movable window panel along the rails. The lower rail includes guide structure that limits flexing of the flexible drive element when the flexible drive element pushes the movable window panel along the rails.
E05F 15/655 - Mécanismes pour battants mus par une force motrice utilisant des actionneurs électriques utilisant des électromoteurs rotatifs pour battants à coulissement horizontal spécialement adaptés aux battants de véhicule
B60J 1/18 - Fenêtres; Pare-brise; Leurs accessoires disposés à l'arrière du véhicule
E05D 15/06 - Suspensions pour battants pour battants coulissant horizontalement sensiblement dans leur propre plan
A vehicular frameless interior rearview mirror assembly includes a mirror head and a mounting portion. The mirror head includes a mirror reflective element and a mirror casing. The mirror reflective element includes a glass substrate having a planar front side and a planar rear side. No portion of the mirror casing overlaps the planar front side of the glass substrate of the mirror reflective element. A camera is disposed within the mirror casing. With the mounting portion of the mirror assembly mounted at an in-cabin side of a windshield of a vehicle, the camera views a driver of the vehicle, and when the mirror head is moved by the driver of the vehicle to adjust the rearward view provided by the mirror reflective element to the driver, the camera moves in tandem with movement of the mirror head. The camera is part of a driver monitoring system of the vehicle.
G02F 1/1333 - Dispositions relatives à la structure
G02F 1/157 - Association structurelle des cellules avec des dispositifs optiques, p.ex. des réflecteurs ou des dispositifs d’éclairage
G02F 1/161 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction Éléments d’espacement; Scellement de cellules; Remplissage ou fermeture de cellules
G02F 1/163 - Fonctionnement des cellules électro-chromiques, p.ex. des cellules d’électrodéposition; Dispositions des circuits à cet effet
B24B 9/02 - Machines ou dispositifs pour meuler les bords ou les biseaux des pièces ou pour enlever des bavures; Accessoires à cet effet caractérisés par le fait qu'ils sont spécialement étudiés en fonction des propriétés de la matière propre aux objets à meuler
B24B 9/08 - Machines ou dispositifs pour meuler les bords ou les biseaux des pièces ou pour enlever des bavures; Accessoires à cet effet caractérisés par le fait qu'ils sont spécialement étudiés en fonction des propriétés de la matière propre aux objets à meuler de matière inorganique non métallique, p.ex. de la pierre, des céramiques, de la porcelaine du verre
B24B 13/00 - Machines ou dispositifs conçus pour meuler ou polir les surfaces optiques des lentilles ou les surfaces de forme similaire d'autres pièces; Accessoires à cet effet
B24B 49/00 - Appareillage de mesure ou de calibrage pour la commande du mouvement d'avance de l'outil de meulage ou de la pièce à meuler; Agencements de l'appareillage d'indication ou de mesure, p.ex. pour indiquer le début de l'opération de meulage
C03C 17/06 - Traitement de surface du verre, p.ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement par des métaux
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
A vehicular frameless interior rearview mirror assembly includes a mirror head and a mounting portion. The mirror head includes a mirror reflective element and a mirror casing. The mirror reflective element includes a glass substrate having a planar front side and a planar rear side. No portion of the mirror casing overlaps the planar front side of the glass substrate of the mirror reflective element. A camera is disposed within the mirror casing. With the mounting portion of the mirror assembly mounted at an in-cabin side of a windshield of a vehicle, the camera views a driver of the vehicle, and when the mirror head is moved by the driver of the vehicle to adjust the rearward view provided by the mirror reflective element to the driver, the camera moves in tandem with movement of the mirror head. The camera is part of a driver monitoring system of the vehicle.
G02F 1/1333 - Dispositions relatives à la structure
G02F 1/157 - Association structurelle des cellules avec des dispositifs optiques, p.ex. des réflecteurs ou des dispositifs d’éclairage
G02F 1/161 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction Éléments d’espacement; Scellement de cellules; Remplissage ou fermeture de cellules
G02F 1/163 - Fonctionnement des cellules électro-chromiques, p.ex. des cellules d’électrodéposition; Dispositions des circuits à cet effet
B24B 9/02 - Machines ou dispositifs pour meuler les bords ou les biseaux des pièces ou pour enlever des bavures; Accessoires à cet effet caractérisés par le fait qu'ils sont spécialement étudiés en fonction des propriétés de la matière propre aux objets à meuler
B24B 9/08 - Machines ou dispositifs pour meuler les bords ou les biseaux des pièces ou pour enlever des bavures; Accessoires à cet effet caractérisés par le fait qu'ils sont spécialement étudiés en fonction des propriétés de la matière propre aux objets à meuler de matière inorganique non métallique, p.ex. de la pierre, des céramiques, de la porcelaine du verre
B24B 13/00 - Machines ou dispositifs conçus pour meuler ou polir les surfaces optiques des lentilles ou les surfaces de forme similaire d'autres pièces; Accessoires à cet effet
B24B 49/00 - Appareillage de mesure ou de calibrage pour la commande du mouvement d'avance de l'outil de meulage ou de la pièce à meuler; Agencements de l'appareillage d'indication ou de mesure, p.ex. pour indiquer le début de l'opération de meulage
C03C 17/06 - Traitement de surface du verre, p.ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement par des métaux
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
A vehicular display assembly includes a pixelated display having a plurality of micro-LEDs disposed at a substrate. Packing density of micro-LEDs of the plurality of micro-LEDs at the substrate is at least 10 micro-LEDs per square centimeter. Each individual micro-LED of the plurality of micro-LEDs, when the vehicular display assembly is operated to emit light, may pass less than 4 mA electrical current. The vehicular display assembly is configured to be disposed at a portion of a vehicle equipped with the vehicular display assembly. With the vehicular display assembly disposed at the portion of the equipped vehicle, light emitted by the plurality of micro-LEDs, when the vehicular display assembly is operated to emit light, is viewable at the portion of the equipped vehicle.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60K 35/00 - Agencement ou adaptations des instruments
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
H01L 25/075 - Ensembles consistant en une pluralité de dispositifs à semi-conducteurs ou d'autres dispositifs à l'état solide les dispositifs étant tous d'un type prévu dans le même sous-groupe des groupes , ou dans une seule sous-classe de , , p.ex. ensembles de diodes redresseuses les dispositifs n'ayant pas de conteneurs séparés les dispositifs étant d'un type prévu dans le groupe
30.
VEHICLE EXTERIOR DOOR HANDLE SYSTEM WITH LIGHT MODULE
A vehicular lighted exterior door handle system includes a lighted exterior door handle assembly and a light module disposed at the door handle assembly. The light module includes a circuit board having a plurality of illumination sources disposed thereat. Individual illumination sources of the plurality of illumination sources are electrically operable to emit light. When the individual illumination sources are electrically operated with the lighted exterior door handle assembly mounted at the door of the equipped vehicle, the light module emits light at least outboard away from the door of the equipped vehicle. With the lighted exterior door handle assembly mounted at the door of the equipped vehicle, the light module is operable to indicate a charge level of a battery of the equipped vehicle.
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60Q 1/32 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer les côtés du véhicule
B60Q 1/38 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer un changement de direction utilisant des sources lumineuses fixes, p.ex. feux fixes clignotants
31.
VEHICULAR EXTERIOR REARVIEW MIRROR ASSEMBLY WITH EXTENDABLE AND RETRACTABLE MIRROR HEAD
A vehicular exterior rearview mirror assembly includes a mounting arm configured for attachment at a side of a vehicle and a mirror head having a mirror reflective element. With the mounting arm attached at the side of the vehicle, the mirror reflective element is oriented to provide a driver of the vehicle a field of view rearward and sideward of the vehicle when the mirror head is in a retracted position and when the mirror head is in an extended position. With the mounting arm attached at the side of the vehicle, and when the mirror head is moved along the mounting arm, angle of the mirror head relative to the side of the vehicle at which the vehicular exterior rearview mirror assembly is attached adjusts to provide the driver of the vehicle the field of view rearward and sideward of the vehicle.
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
B60R 1/078 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule montés de façon à être écartés en bloc latéralement, p.ex. quand le véhicule tire une remorque
B60R 1/06 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule
B60R 1/076 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule escamotables sous l'effet de forces externes excessives et munis d'une position d'utilisation indexée
A vehicular electrochromic rearview mirror assembly includes a mounting structure and a mirror head. The mirror head accommodates an electrochromic mirror reflective element including front and rear glass substrates and an electrochromic medium disposed therebetween. The medium conductively contacts a transparent conductive coating at a second side of the front substrate and a conductive coating at a third side of the rear substrate. A conductive connector is disposed at a fourth side of the rear substrate and conductively connects to a conductive material along a perimeter region of the second side and the conductive coating at the third side. The perimeter region extends beyond an outer peripheral edge of the rear substrate. The conductive material is established in a zigzag pattern along the perimeter region so portions of the zigzag pattern are inboard and other portions are outboard of the edge of the rear substrate.
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
G02F 1/1333 - Dispositions relatives à la structure
A vehicular driver monitoring system includes an interior rearview mirror assembly having a mirror head accommodating a mirror reflective element and adjustable about a mounting structure. The mirror head is adjustable relative to the mounting structure to adjust a rearward view provided by the mirror reflective element. A driver monitoring camera is accommodated by the mirror head behind the mirror reflective element. With the mirror head adjusted to provide the rearward view, a normal vector extending perpendicular to the mirror reflective element is directed toward a driver side of the cabin of the vehicle and, responsive to determination that a passenger is present at a passenger side of the cabin of the vehicle, a principal viewing axis of the driver monitoring camera is angled more toward a centerline axis of the vehicle than the normal vector of the mirror reflective element.
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
B60R 1/29 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone à l’intérieur du véhicule, p.ex. pour visualiser les passagers ou le chargement
B60R 1/30 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules fournissant une vision dans le spectre non visible, p.ex. une vision nocturne ou infrarouge
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
G06V 20/59 - Contexte ou environnement de l’image à l’intérieur d’un véhicule, p.ex. concernant l’occupation des sièges, l’état du conducteur ou les conditions de l’éclairage intérieur
A vehicular exterior rearview mirror assembly includes a base portion configured for attachment at a side of a vehicle, and a mirror head having a mirror reflective element and an electrically-operable mirror actuator. The base portion extends through an aperture in the mirror head. The mirror head includes wall structure that circumscribes and spans a perimeter circumferential edge of a glass substrate of the mirror reflective element. The mirror actuator is operable to adjust the mirror head relative to the base portion, and the aperture allows for movement of the mirror head relative to the base portion. The mirror head includes an electrically-operable accessory that moves together and in tandem with the mirror actuator and the mirror reflective element when the mirror actuator is electrically operated. The accessory, when electrically operated, meets a performance requirement throughout a range of adjustment of the mirror head relative to the base portion.
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
A vehicular exterior rearview mirror assembly includes a mounting arm and a mirror head at one end of the mounting arm distal from an attachment portion of the mounting arm that is configured for attachment at a vehicle. A mirror reflective element is fixedly attached at the mirror head. An innermost side of the mirror reflective element is attached at a front side of an attachment plate. The mirror reflective element moves in tandem with movement of the mirror head relative to the mounting arm when the driver of the vehicle operates an electrically-operable actuator. The attachment plate includes wall structure that extends from the front side of the attachment plate and circumscribes and spans the perimeter circumferential edge of the glass substrate and does not encroach onto and does not overlap the front surface of the glass substrate of the exterior mirror reflective element.
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
G06F 3/047 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction utilisant un ensemble de fils conducteurs, p.ex. des fils conducteurs croisés
B60R 25/25 - Moyens pour enclencher ou arrêter le système antivol par biométrie
G06F 3/04883 - Techniques d’interaction fondées sur les interfaces utilisateur graphiques [GUI] utilisant des caractéristiques spécifiques fournies par le périphérique d’entrée, p.ex. des fonctions commandées par la rotation d’une souris à deux capteurs, ou par la nature du périphérique d’entrée, p.ex. des gestes en fonction de la pression exer utilisant un écran tactile ou une tablette numérique, p.ex. entrée de commandes par des tracés gestuels pour l’entrée de données par calligraphie, p.ex. sous forme de gestes ou de texte
A vehicular exterior door handle assembly includes a base portion and a handle portion having a base end and a swing end opposite the base end. The handle portion is movable relative to the base portion between a retracted position and a deployed position. An actuator includes a motor that is electrically operable in a deploying direction to move the handle portion toward the deployed position and is electrically operable in a retracting direction opposite the deploying direction. The motor operates in the deploying direction and imparts pivotal movement of a connecting link to move the handle portion toward the deployed position. With the handle portion at the deployed position, electrical operation of the motor of the actuator in the retracting direction imparts retracting movement of a reset element that engages a bellcrank and/or the connecting link to retract the handle portion toward the retracted position.
A vehicular interior rearview mirror assembly includes a mirror head accommodating an interior mirror reflective element. The mirror reflective element has a mirror transflector that transmits near infrared light incident thereon, transmits visible light incident thereon and reflects visible light incident thereon. A camera is disposed within the mirror head and views through the mirror transflector. The camera includes an imaging sensor having a quantum efficiency (QE) of at least 15% for near infrared light having a wavelength of 940 nm. First, second and third near infrared illumination sources are disposed within the mirror head and operable to emit near infrared light that passes through the mirror transflector. The near infrared illumination sources are at respective locations at the mirror reflective element and, when powered, illuminate respective seat regions for a driver-monitoring function or an occupant-detection function.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
H04N 23/56 - Caméras ou modules de caméras comprenant des capteurs d'images électroniques; Leur commande munis de moyens d'éclairage
H04N 25/10 - Circuits de capteurs d'images à l'état solide [capteurs SSIS]; Leur commande pour transformer les différentes longueurs d'onde en signaux d'image
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
B60R 11/00 - Autres aménagements pour tenir ou monter des objets
A vehicular driver monitoring system includes an interior rearview mirror assembly having a driver monitoring camera and first and second near-infrared light emitting elements accommodated by a mirror head. The light emitting elements are oriented at the mirror head so that (i) a beam of light emitted by the first light emitting element would be directed toward a driver's region of a left hand drive vehicle if the mirror assembly were installed in the LHD vehicle, and (ii) a beam of light emitted by the second light emitting element would be directed toward a driver's region of a right hand drive vehicle if the mirror assembly were installed in the RHD vehicle. The system enables and/or operates the first or second light emitting element for a driver monitoring function responsive to indication that the mirror assembly is installed or will be installed in a LHD vehicle or a RHD vehicle.
B60R 1/30 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules fournissant une vision dans le spectre non visible, p.ex. une vision nocturne ou infrarouge
B60R 1/29 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone à l’intérieur du véhicule, p.ex. pour visualiser les passagers ou le chargement
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
G06V 20/59 - Contexte ou environnement de l’image à l’intérieur d’un véhicule, p.ex. concernant l’occupation des sièges, l’état du conducteur ou les conditions de l’éclairage intérieur
G06V 40/20 - Mouvements ou comportement, p.ex. reconnaissance des gestes
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
B60R 11/00 - Autres aménagements pour tenir ou monter des objets
A vehicular exterior rearview mirror assembly includes a mirror head accommodating a mirror reflective element. The mirror head is adjustably mounted at a mounting base configured for attachment at a side of a vehicle. A plurality of cameras are disposed at the mounting base and includes (i) a rearward viewing camera that views at least rearward of the vehicle and (ii) a downward viewing camera that views at least downward. The mirror head accommodates an electronic accessory. A wire harness passing through the mounting base to the mirror head includes individual wires that terminate at respective first, second, and third electrical connectors. The accessory is electrically connected to a power source of the vehicle via the first connector. The rearward and downward viewing cameras respectively connect to the second and third connectors to receive electrical power from the power source and provide image data to an electronic control unit.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
B60R 16/02 - Circuits électriques ou circuits de fluides spécialement adaptés aux véhicules et non prévus ailleurs; Agencement des éléments des circuits électriques ou des circuits de fluides spécialement adapté aux véhicules et non prévu ailleurs électriques
B60S 1/56 - Nettoyage des pare-brise, fenêtres ou dispositifs optiques spécialement adaptés pour nettoyer d'autres parties ou dispositifs que les fenêtres avant ou les pare-brise
H04N 23/90 - Agencement de caméras ou de modules de caméras, p. ex. de plusieurs caméras dans des studios de télévision ou des stades de sport
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04N 23/52 - Caméras ou modules de caméras comprenant des capteurs d'images électroniques; Leur commande - Détails de structure Éléments optimisant le fonctionnement du capteur d'images, p. ex. pour la protection contre les interférences électromagnétiques [EMI] ou la commande de la température par des éléments de transfert de chaleur ou de refroidissement
G06V 20/58 - Reconnaissance d’objets en mouvement ou d’obstacles, p.ex. véhicules ou piétons; Reconnaissance des objets de la circulation, p.ex. signalisation routière, feux de signalisation ou routes
G02B 27/00 - Systèmes ou appareils optiques non prévus dans aucun des groupes ,
H05K 5/00 - Enveloppes, coffrets ou tiroirs pour appareils électriques
A vehicular exterior rearview mirror assembly includes a mirror head that includes a mirror reflective element and a mounting base configured for attachment at a side of a vehicle. The mirror head is movable relative to the mounting base between an extended position and a folded position. A pivot assembly includes (i) a pivot post fixed relative to the mounting base, (ii) a housing portion pivotable about the pivot post, and (iii) a biasing element disposed at the pivot post between the housing portion and an end of the pivot post, the biasing element urging a detent interface into engagement. The detent interface moves into engagement to secure the mirror head in the extended or folded position. The biasing element includes first and second coil portions having overlapping and alternating coil patterns.
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
41.
Vehicular overhead console with light transmissive panel
A vehicular overhead console module includes a base portion configured to attach at an interior cabin portion of a vehicle. A light source is accommodated by the base portion and is electrically operable to emit light. A light transmitting panel is disposed at the base portion and includes an electrically dimmable medium. The electrically dimmable medium is adjustable at least between a first light transmission state, where the light transmitting panel has a first level of light transmissivity, and a second light transmission state, where the light transmitting panel has a second level of light transmissivity. The first level of light transmissivity is greater than the second level of light transmissivity. When the electrically dimmable medium is at the first light transmission state, light emitted by the light source passes through the light transmitting panel to illuminate at least a portion of an interior cabin of the vehicle.
B60Q 3/74 - Agencement des dispositifs d’éclairage pour l’intérieur des véhicules; Dispositifs d’éclairage spécialement adaptés à l’intérieur des véhicules caractérisés par leur objet pour l’éclairage général de l’habitacle en combinaison avec un éclairage spécifique, p.ex. des lampes d’habitacle avec des lampes de lecture
B60R 7/04 - Accessoires de rangement ou fixation, intérieurs aux véhicules, essentiellement destinés aux objets personnels de dimension plus petite qu'une valise, p.ex. articles de voyage ou cartes à l'emplacement du conducteur ou du passager
B60Q 3/82 - Interrupteurs spécialement adaptés à l’éclairage intérieur des véhicules, p.ex. commutation par basculement de la lentille
F21V 14/00 - Commande de la distribution de la lumière émise par réglage d’éléments constitutifs
B60Q 3/51 - Agencements de montage pour le montage des dispositifs d’éclairage à l’intérieur des véhicules, p.ex. au plafond ou au plancher
B60R 11/00 - Autres aménagements pour tenir ou monter des objets
42.
VEHICULAR OVERHEAD CONSOLE WITH FLEXIBLE CIRCUIT BOARD
A vehicular overhead console module includes a base portion configured to attach at an interior portion of a vehicle, a primary printed circuit board (primary PCB) accommodated by the base portion, and a secondary printed circuit board (secondary PCB) accommodated by the base portion and spaced from the primary PCB. The secondary PCB is electrically connected to an electronic component accommodated by the base portion and includes electronic circuitry associated with the electronic component. Electronic circuitry of the primary PCB includes a processor for processing electronic signals received from the secondary PCB. The primary PCB and the secondary PCB are secured at the base portion via one or more press-fit pins of the base portion. A flexible electrical connection electrically connects the primary PCB and the secondary PCB and flexes to conform to an inner surface of the base portion.
A vehicular exterior rearview mirror assembly includes a mirror reflective element sub-assembly having a mirror reflective element, a mirror reflector coating, a mirror back plate, and indicator element. The indicator element includes a circuit board and a light source. The indicator element includes a diffuser that diffuses light emitted by the light source. An icon is established through a metallic reflector coating disposed at the glass substrate. The icon includes a light-transmitting aperture. With the vehicular exterior rearview mirror assembly attached at the vehicle, and when the light source is activated, light emitted by the light source passes through a light-transmitting portion of a heater pad and through the light-transmitting aperture of the icon. With the vehicular exterior rearview mirror assembly attached at the vehicle and when the light source is activated, the icon is illuminated and is viewable by the driver of the vehicle.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
F21V 23/00 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B60Q 1/34 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer un changement de direction
B60Q 1/50 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer d'autres intentions ou conditions, p.ex. demandes d'attente ou de dépassement
B60R 1/06 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
B60Q 1/00 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet
F21V 23/04 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des interrupteurs
A vehicular cabin monitoring system includes a radar assembly disposed in a cabin of a vehicle and operable to capture radar data. The radar assembly includes at least one radar transmit antenna that is operable to transmit radar waves and at least one radar receive antenna that is operable to receive radar waves. The transmitted radar waves are transmitted at least to a hotspot zone in the cabin of the vehicle. A data processor is operable to process radar data captured by the radar assembly. The system, via processing at the data processor of radar data captured by the radar assembly, determines movement within the hotspot zone of a body part of an occupant present in the cabin of the vehicle. The system, responsive to determining movement within the hotspot zone of the body part of the occupant, generates a control command.
B60W 50/10 - Interprétation des requêtes ou demandes du conducteur
G01S 7/41 - DÉTERMINATION DE LA DIRECTION PAR RADIO; RADIO-NAVIGATION; DÉTERMINATION DE LA DISTANCE OU DE LA VITESSE EN UTILISANT DES ONDES RADIO; LOCALISATION OU DÉTECTION DE LA PRÉSENCE EN UTILISANT LA RÉFLEXION OU LA RERADIATION D'ONDES RADIO; DISPOSITIONS ANALOGUES UTILISANT D'AUTRES ONDES - Détails des systèmes correspondant aux groupes , , de systèmes selon le groupe utilisant l'analyse du signal d'écho pour la caractérisation de la cible; Signature de cible; Surface équivalente de cible
B60W 40/08 - Calcul ou estimation des paramètres de fonctionnement pour les systèmes d'aide à la conduite de véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier liés aux conducteurs ou aux passagers
B60W 50/14 - Moyens d'information du conducteur, pour l'avertir ou provoquer son intervention
G06F 3/01 - Dispositions d'entrée ou dispositions d'entrée et de sortie combinées pour l'interaction entre l'utilisateur et le calculateur
G06F 3/04886 - Techniques d’interaction fondées sur les interfaces utilisateur graphiques [GUI] utilisant des caractéristiques spécifiques fournies par le périphérique d’entrée, p.ex. des fonctions commandées par la rotation d’une souris à deux capteurs, ou par la nature du périphérique d’entrée, p.ex. des gestes en fonction de la pression exer utilisant un écran tactile ou une tablette numérique, p.ex. entrée de commandes par des tracés gestuels par partition en zones à commande indépendante de la surface d’affichage de l’écran tactile ou de la tablette numérique, p.ex. claviers virtuels ou menus
A vehicular exterior rearview mirror control system is configured to attach at a side of a vehicle and includes a mirror assembly having a variable reflectance mirror reflective element. The vehicular rearview mirror control system processes image data captured by a rear backup camera of the vehicle. The rearview mirror control system, via processing a first subset of image data captured by the rear backup camera, determines ambient light rearward of the vehicle. The rearview mirror control system, via processing a second subset of received image data captured by the rear backup camera, determines glare light emanating from a headlight of another vehicle following the equipped vehicle. The first subset of captured image data is different than the second subset of captured image data. A door module unit of the vehicle controls dimming of the variable reflectance mirror reflective element based at least in part on the determined glare light.
A vehicular exterior door handle assembly includes a base portion configured to mount at a vehicle door. A handle portion includes a grasping portion and is movable relative to the base portion between a recessed position, where the grasping portion is recessed at the base portion, and a deployed position, where the grasping portion protrudes outward to be graspable by the user. A deployment mechanism is operable to move the handle portion between the recessed and deployed positions. A control module, based on a user input, actuates a latch mechanism to unlock the vehicle door. The deployment mechanism, responsive to the control module unlocking the vehicle door, moves the handle portion from the recessed position to the deployed position. With the handle portion in the deployed position and the vehicle door unlocked, the handle portion is graspable by the user to open the vehicle door.
A vehicular exterior rearview mirror assembly includes a mirror head movably attached at a mounting base configured for mounting at a side of a vehicle. The mirror head includes a mirror casing and a mirror reflective element. An actuator is operable to move the mirror head relative to the mounting base between at least an extended position and a folded position. The actuator includes a first detent interface that is engaged to maintain the mirror head at the folded or extended position when the mirror head is moved via the actuator to that position. The actuator includes a second detent interface that is engaged to maintain the mirror head at the folded or extended position when the mirror head is manually moved to that position. The second detent interface is not engaged while the actuator moves the mirror head between the folded position and the extended position.
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
A vehicular exterior rearview mirror assembly includes a mirror head pivotally mounted at a mounting base configured for attachment at a side of a vehicle. The mirror head accommodates a reflective element. A powerfold actuator is operable to pivot the mirror head relative to the mounting base between at least an extended position and a folded position. The powerfold actuator includes a primary detent state that is engaged to maintain the mirror head at the extended position when the mirror head is pivoted via the powerfold actuator to the extended position. When the mirror head is manually moved from the folded position to the extended position, the powerfold operator is in a secondary detent to maintain the mirror head at the extended position.
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
49.
VEHICULAR EXTERIOR REARVIEW MIRROR ASSEMBLY WITH BLIND ZONE INDICATOR
A vehicular exterior rearview mirror assembly includes a mounting structure, a mirror reflective element, a mirror back plate, a heater element, and a blind zone indication module. The heater element is disposed between the mirror back plate and the mirror reflective element. The blind zone indication module includes a diffuser and a housing that houses a circuit element and a light source. The circuit element includes electrically conductive terminals that are in electrical connection with circuitry of the circuit element and that are disposed at a connector portion of the housing that is configured to connect to a wire harness to electrically power circuitry of the circuit element when the vehicular exterior rearview mirror assembly is mounted and used at a vehicle. The blind zone indication module is associated with a blind spot detection system of a vehicle at which the vehicular exterior rearview mirror assembly is mounted and used.
A vehicular exterior rearview mirror assembly includes a powerfold actuator electrically operable to pivot a mirror head relative to a mounting base. The powerfold actuator includes a biasing element disposed between an upper housing and an upper end of a pivot tube and releasably retains the powerfold actuator in at least one detent state. The powerfold actuator includes (i) a lower detent disposed between the base portion and a lower housing, (ii) an output gear disposed between the lower housing and the upper housing and (iii) an upper detent disposed between the lower housing and the upper housing. When the powerfold actuator is in a primary detent state, the lower detent and the output gear are rotationally fixed relative to the pivot tube and the upper detent is axially movable along the pivot tube. When the mirror head is manually moved, a secondary detent state is engaged.
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
A vehicular exterior rearview mirror assembly includes a mounting arm and a mirror head having a mirror reflective element. An electrically-operated actuator includes a first attachment element that attaches at an actuator-mounting bracket of the mounting arm and a second attachment element that attaches at the mirror head. The actuator is electrically operated to cause adjustment of the mirror head relative to the mounting arm about first and second pivot axes. A mounting post of the mounting arm passes through an opening of the mirror head, the opening providing clearance between the mirror head and the mounting arm to allow movement of the mirror head relative to the mounting arm during electrical operation of the actuator when the base mounting portion of the vehicular exterior rearview mirror assembly is mounted at the exterior portion of the side door of the equipped vehicle.
B60R 1/07 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
52.
VEHICULAR TRAILERING ASSIST SYSTEM WITH AUXILIARY SIDE TRAILER CAMERAS
A vehicular vision system includes a plurality of vehicle cameras disposed at a vehicle, a trailer camera disposed at a trailer, and a video display screen disposed at the vehicle and viewable by a driver of the vehicle. When the trailer is hitched to the vehicle, the trailer camera captures image data and provides captured image data to an electronic control unit (ECU). The plurality of vehicle cameras capture image data and provide captured image data to the ECU. An auxiliary camera is detachably attached at an exterior side portion of the trailer. With the auxiliary camera detachably attached at the exterior side portion of the trailer and during a reversing maneuver of the vehicle with the trailer hitched to the vehicle, and responsive to a user input, video images derived from the image data captured by the auxiliary camera are displayed for viewing by the driver of the vehicle.
B60R 1/25 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision prédéterminé vers les côtés du véhicule
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
H04N 23/82 - Chaînes de traitement de la caméra; Leurs composants pour commander la réponse de la caméra indépendamment de la luminosité de la scène, p. ex. correction de gamma
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04N 5/268 - Distribution ou commutation du signal
B60R 1/26 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision prédéterminé vers l’arrière du véhicule
B60R 1/28 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision réglable
53.
Method of assembling mirror reflective element sub-assembly for exterior rearview mirror assembly
A method for assembling a mirror reflective element sub-assembly for a vehicular exterior rearview mirror assembly includes assembling an indicator module by heat staking a printed circuit board at a receiving part of a housing to form a housing and printed circuit board assembly and dispensing potting material at the printed circuit board to seal the printed circuit board at the housing and aligning and taping a diffuser at the housing. A back plate is provided that has an indicator attaching portion for attaching the indicator module. The back plate is placed at a support fixture and a mirror reflective element is attached at the back plate. The indicator module is attached at the indicator attaching portion of the back plate. Light emitted by the indicator module, when electrically powered to emit light, passes through the mirror reflective element at an aperture of the back plate.
B60R 1/00 - Dispositions pour la visibilité optique; Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d’images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules
B60R 1/06 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
54.
Vehicular exterior rearview mirror assembly with illumination module
A vehicular exterior rearview mirror assembly includes a mirror reflective element and an illumination module that includes a freeformed lens optic and a circuit board with an illumination source disposed thereat. With the vehicular exterior rearview mirror assembly mounted at a side of a vehicle, light emitted by the illumination source passes through the freeformed lens optic and provides ground lighting that illuminates a ground region located at the side of the vehicle. The ground lighting includes (a) ground illumination of the illuminated ground region and (b) within the ground illumination of the illuminated ground region, a logo formed by the freeformed lens optic. The logo formed by the freeformed lens optic has a light intensity greater than any light intensity of the ground illumination of the illuminated ground region. The illumination module is snap-attached at a portion of the vehicular exterior rearview mirror assembly.
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
G02B 27/00 - Systèmes ou appareils optiques non prévus dans aucun des groupes ,
G02B 3/02 - Lentilles simples ou composées à surfaces non sphériques
B60Q 3/20 - Agencement des dispositifs d’éclairage pour l’intérieur des véhicules; Dispositifs d’éclairage spécialement adaptés à l’intérieur des véhicules montés sur des accessoires spécifiques des habitacles des passagers ou du conducteur
B60Q 3/44 - Agencement des dispositifs d’éclairage pour l’intérieur des véhicules; Dispositifs d’éclairage spécialement adaptés à l’intérieur des véhicules spécialement adaptés à des types spécifiques de véhicules pour les véhicules de transport en commun, p.ex. les bus Éclairage ponctuel, p.ex. lampes de lecture
B60Q 3/12 - Agencement des dispositifs d’éclairage pour l’intérieur des véhicules; Dispositifs d’éclairage spécialement adaptés à l’intérieur des véhicules pour tableaux de bord Éclairage sur la surface à éclairer
G03B 21/00 - Projecteurs ou visionneuses du type par projection; Leurs accessoires
G03B 21/28 - Réflecteurs dans le faisceau de projection
55.
VEHICLE INTERIOR REARVIEW MIRROR ASSEMBLY WITH ACTUATOR
A vehicular interior rearview mirror assembly includes a mounting structure configured for mounting at an interior portion of a vehicle. The mounting structure includes a mounting arm that has (i) a proximal end portion and (ii) a distal end portion distal from the proximal end portion. With the mounting structure mounted at the interior portion of the vehicle, the proximal end portion of the mounting arm is attached at the interior portion of the vehicle. A motorized actuator is disposed within a mirror housing that accommodates a reflective element. The motorized actuator is electrically operable to adjust the reflective element and the mirror housing together and in tandem relative to the mounting structure to provide a desired rearward field of view to a driver of the vehicle when the vehicular interior rearview mirror assembly is mounted and operated in the vehicle.
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
G02B 17/04 - Systèmes catoptriques, p.ex. systèmes redressant et renversant une image utilisant uniquement des prismes
G02F 1/133 - Dispositions relatives à la structure; Excitation de cellules à cristaux liquides; Dispositions relatives aux circuits
A vehicular camera monitoring system includes an electronic control unit (ECU) at a vehicle and a support arm movably disposed at a side portion of the vehicle, with the support arm having a base end attached at the side portion of the vehicle and a distal end opposite the base end. A camera is disposed at the distal end of the support arm. The support arm is movable between a stowed position and an extended position. A cover element covers an aperture at the side portion at least when the support arm is in the extended position. The camera, when the support arm is in the extended position, captures image data and provides captured image data to the ECU, which processes the provided image data for (i) display of video images derived from provided image data and/or (ii) detection of an object in the field of view of the camera.
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
B60R 1/22 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
A vehicular frameless interior rearview mirror assembly includes a mirror head and a mounting portion. The mirror head includes a mirror reflective element and a mirror casing. The mirror reflective element includes a glass substrate having a planar front side and a planar rear side. No portion of the mirror casing overlaps the planar front side of the glass substrate of the mirror reflective element. A camera is disposed within the mirror casing. With the mounting portion of the mirror assembly mounted at an in-cabin side of a windshield of a vehicle, the camera views a driver of the vehicle, and when the mirror head is moved by the driver of the vehicle to adjust the rearward view provided by the mirror reflective element to the driver, the camera moves in tandem with movement of the mirror head. The camera is part of a driver monitoring system of the vehicle.
G02F 1/1333 - Dispositions relatives à la structure
G02F 1/157 - Association structurelle des cellules avec des dispositifs optiques, p.ex. des réflecteurs ou des dispositifs d’éclairage
G02F 1/161 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction Éléments d’espacement; Scellement de cellules; Remplissage ou fermeture de cellules
G02F 1/163 - Fonctionnement des cellules électro-chromiques, p.ex. des cellules d’électrodéposition; Dispositions des circuits à cet effet
58.
VEHICULAR EXTERIOR MIRROR SYSTEM WITH LIGHT MODULE
A vehicular lighted exterior rearview mirror system includes a lighted exterior rearview mirror assembly and a light module. With the mirror assembly attached at a side of a vehicle, the light module is at least in part disposed at a portion of the mirror head of the lighted exterior rearview mirror assembly that faces in a direction of forward travel of the vehicle. The light module includes a two dimensional array of illumination sources that has at least two rows of illumination sources, each row of illumination sources having a plurality of illumination sources. With the mirror assembly attached at the vehicle, the two dimensional array of illumination sources, when electrically powered, emits light at least in the direction of forward travel of the vehicle. The illumination sources of the two dimensional array of illumination sources are controlled responsive to a turn signal of the vehicle being actuated.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
A vehicular video camera display system includes an interior rearview mirror assembly having a casing and an electrochromic reflective element, with a video display device disposed in the casing behind the electrochromic reflective element. With the interior rearview mirror assembly mounted at the in-cabin side of a windshield of a vehicle, a video display screen of the video display device is operable to display video images that are viewable through the electrochromic reflective element by a driver of the vehicle. A rearward-viewing video camera is disposed at a rear portion of the vehicle and views at least rearward of the vehicle. Control circuitry is disposed at the interior rearview mirror assembly. Image data captured by the rearward-viewing video camera is communicated as a digital signal from the rearward-viewing video camera via a cable to the control circuitry disposed at the interior rearview mirror assembly.
H04N 23/63 - Commande des caméras ou des modules de caméras en utilisant des viseurs électroniques
H10K 59/50 - OLED intégrées avec des éléments de modulation de lumière, p. ex. avec des éléments électrochromes, des éléments photochromes ou des éléments à cristaux liquides
H10K 59/65 - OLED intégrées avec des capteurs d'images inorganiques
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
G02F 1/157 - Association structurelle des cellules avec des dispositifs optiques, p.ex. des réflecteurs ou des dispositifs d’éclairage
G02B 5/00 - OPTIQUE ÉLÉMENTS, SYSTÈMES OU APPAREILS OPTIQUES Éléments optiques autres que les lentilles
60.
Vehicle exterior door handle system with light module
A vehicular lighted exterior door handle system includes a lighted exterior door handle assembly and a light module disposed at the door handle assembly. The light module includes at least three illumination sources linearly arranged at a circuit board and individually operable to emit light. With the door handle assembly mounted at a door of a vehicle, the individual illumination sources are operated responsive to a user input that is actuatable by a driver of the vehicle to activate a turn signal indicator system of the vehicle. With the door handle assembly mounted at the door of the vehicle, and when the illumination sources are operated to emit light responsive to actuation of the user input, an operation sequence of the individual illumination sources is varied between at least a first operation sequence and a second operation sequence based at least in part on movement of the vehicle.
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60Q 1/32 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer les côtés du véhicule
F21Y 113/13 - Combinaison de sources lumineuses de couleurs différentes comprenant un ensemble de sources lumineuses ponctuelles
F21Y 103/10 - Sources lumineuses de forme allongée, p.ex. tubes fluorescents comprenant un réseau linéaire d’éléments générateurs de lumière ponctuelle
A vehicular driver monitoring system includes a driver monitoring camera disposed at an interior rearview mirror assembly of a vehicle. The driver monitoring camera views a driver of the vehicle when the driver is driving the vehicle. The driver monitoring camera captures image data. An image processor is operable to process image data captured by the driver monitoring camera. The vehicular driver monitoring system determines driver performance based at least in part on (i) image processing by the image processor of image data captured by the driver monitoring camera, (ii) a vehicle characteristic and (iii) a condition exterior of the equipped vehicle. The vehicle characteristic includes at least one selected from the group consisting of (a) vehicle speed, (b) vehicle acceleration and (c) vehicle orientation.
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B32B 17/10 - Produits stratifiés composés essentiellement d'une feuille de verre ou de fibres de verre, de scorie ou d'une substance similaire comprenant du verre comme seul composant ou comme composant principal d'une couche adjacente à une autre couche d'une substance spécifique de résine synthétique
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
G02F 1/157 - Association structurelle des cellules avec des dispositifs optiques, p.ex. des réflecteurs ou des dispositifs d’éclairage
B32B 7/14 - Liaison entre couches utilisant des adhésifs interposés ou des matériaux interposés ayant des propriétés adhésives appliqués en disposition espacée, p.ex. en bandes
62.
Vehicular lighting assembly with micro-LED lighting device
A vehicular lighting assembly includes an plurality of micro-LEDs disposed at a substrate. Width dimension of each individual micro-LED of the plurality of micro-LEDs is less than 500 microns, and length dimension of each individual micro-LED of the plurality of micro-LEDs is less than 500 microns. Packing density of micro-LEDs of the plurality of micro-LEDs at the substrate is at least 10 micro-LEDs per square centimeter. Each individual micro-LED of the plurality of micro-LEDs, when the vehicular lighting assembly is operated to emit light, passes less than 4 mA electrical current. The vehicular lighting assembly is configured to be disposed at a portion of a vehicle equipped with the vehicular lighting assembly, With the vehicular lighting assembly disposed at the portion of the vehicle, light emitted by the plurality of micro-LEDs, when the vehicular lighting assembly is operated to emit light, is viewable at the portion of the vehicle.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60K 35/00 - Agencement ou adaptations des instruments
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
H01L 25/075 - Ensembles consistant en une pluralité de dispositifs à semi-conducteurs ou d'autres dispositifs à l'état solide les dispositifs étant tous d'un type prévu dans le même sous-groupe des groupes , ou dans une seule sous-classe de , , p.ex. ensembles de diodes redresseuses les dispositifs n'ayant pas de conteneurs séparés les dispositifs étant d'un type prévu dans le groupe
63.
VEHICULAR REAR WINDOW ASSEMBLY WITH SYSTEM STATUS INDICATOR
A vehicular rear window assembly includes a fixed window panel and an indicating device having a plurality of light sources. The vehicular rear window assembly is configured to be disposed at a rear portion of a cabin of a vehicle. The indicating device is disposed at the fixed window panel. With the vehicular rear window assembly disposed at the rear portion of the cabin of the vehicle, the light sources, when electrically powered to emit light, emit light that is visible through the window panel so as to be viewable by a person viewing the vehicular rear window assembly from exterior and rearward of the vehicle. The indicating device is operated responsive to at least one system of the vehicle. Responsive to an output of the at least one system, the indicating device adjusts operation of the light sources to indicate a status of the at least one system.
B60Q 1/44 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer le freinage
B60Q 1/30 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer l'arrière du véhicule, p.ex. au moyen de surfaces réfléchissantes
B60Q 1/24 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs étant principalement destinés à éclairer la route en avant du véhicule ou d'autres zones de la route ou des environs pour éclairer des zones autres que la route, à l'avant du véhicule uniquement
B60Q 1/00 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet
64.
Handle assembly for vehicular closure panels having integrated antenna and force sensor configuration
A vehicular door handle assembly includes a handle portion, and first and second sensors disposed within the handle portion. The first sensor is configured to communicate with a remote device. The second sensor is configured to sense force applied at a deformable portion of an outer wall of the handle portion. The first sensor, responsive to communication with the remote device, communicates a first signal to an electronic control unit. The second sensor communicates a second signal to the electronic control unit for controlling the vehicular door handle assembly responsive to sensing by the second sensor of force applied by a user at the deformable portion of the outer wall. Responsive to the first signal and responsive to the second signal, the electronic control unit allows the door of the vehicle to be opened by the user.
E05B 81/78 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées en tant que partie d’un verrouillage ou déverrouillage mains libres
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
B60R 25/24 - Moyens pour enclencher ou arrêter le système antivol par des éléments d’identification électroniques comportant un code non mémorisé par l’utilisateur
A vehicular vision system includes a rear-viewing camera disposed at a vehicle and viewing at least rearward of the vehicle. Each frame of image data captured by the imaging array of the rear-viewing camera includes a plurality of grids, with each grid of the plurality of grids having a respective set of photosensing elements associated with respective rows and columns of photosensing elements. A electro-optic rearview mirror assembly includes an electro-optic mirror reflective element that is controlled responsive to an ambient light condition and a glare light condition. The ambient light condition is determined by processing at least one first grid of the plurality of grids of the frames of image data captured by the rear-viewing camera. The glare light condition is determined by processing at least one second grid of the plurality of grids of the frames of image data captured by the rear-viewing camera.
G02F 1/163 - Fonctionnement des cellules électro-chromiques, p.ex. des cellules d’électrodéposition; Dispositions des circuits à cet effet
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
G02F 1/155 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction Électrodes
G02F 1/161 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction Éléments d’espacement; Scellement de cellules; Remplissage ou fermeture de cellules
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
66.
Interior rearview mirror assembly with driver monitoring system
A vehicular interior rearview mirror assembly includes a mirror head having an interior mirror reflective element. The mirror reflective element has a mirror transflector that transmits near-IR light incident thereon, transmits visible light incident thereon and reflects visible light incident thereon. The mirror assembly includes a camera disposed within the mirror head and viewing through the mirror transflector. The camera includes an imaging sensor having a quantum efficiency (QE) of at least 15% for near-infrared (near-IR) light having a wavelength of 940 nm. The mirror assembly further includes first, second and third near-IR illumination sources disposed within the mirror head and operable to emit near-IR light that passes through the mirror transflector. The near-IR illumination sources are at respective angles relative to a planar front surface of the mirror reflective element and, when powered, illuminate respective in-cabin regions for a driver monitoring function or an occupant detection function.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 11/04 - Montage des caméras pour fonctionner pendant la marche; Disposition de leur commande par rapport au véhicule
H04N 23/56 - Caméras ou modules de caméras comprenant des capteurs d'images électroniques; Leur commande munis de moyens d'éclairage
H04N 25/10 - Circuits de capteurs d'images à l'état solide [capteurs SSIS]; Leur commande pour transformer les différentes longueurs d'onde en signaux d'image
A vehicular exterior door handle assembly includes a bracket configured to mount at a vehicular door, a handle portion mounted at the bracket, and a switch mechanism disposed at the handle portion that includes a trigger element movably disposed within a housing. The housing includes an inner portion and an outer portion. When a force is applied at the outer portion, the outer portion moves toward the inner portion. The outer portion of the housing is configured to engage the trigger element as the outer portion moves toward the inner portion. As the outer portion moves toward the inner portion and the outer portion engages the trigger element, the trigger element moves within the housing in a second direction at an angle relative to the first direction and engages a microswitch disposed within the housing to actuate the switch mechanism to operate to release a latch mechanism of the door.
E05B 81/76 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées
A vehicular interior rearview mirror assembly includes a mounting base having a socket, and a mirror head attached at and pivotable about the mounting base. The mirror head includes a variable reflectance electro-optic mirror reflective element, and a ball member that forms a pivot joint with the socket. The mirror reflective element is attached at an attachment plate that includes electrically conductive elements that are electrically connected to respective electrically conductive contacts at the rear side of the mirror reflective element via a connector portion of each electrically conductive element engaging and flexing and being biased toward the respective electrically conductive contact. The electrically conductive elements are electrically connected to a connector of the ball member. With the mounting base mounted at the interior portion of the vehicle and the ball member received in the socket of the mounting base, the connector is electrically connected to a vehicle wire harness.
A vehicular interior rearview mirror assembly includes a mounting structure, a plastic mirror casing, and a mirror reflective element having a glass substrate. The glass substrate includes a periphery surface extending between a planar first surface and a planar second surface and spanning a thickness dimension of the glass substrate. The mirror casing includes a central mounting portion and spaced apart attachment portions. The mirror reflective element is adhesively attached the spaced apart attachment portions. The central mounting portion includes a first pivot element and the mounting structure includes a second pivot element, the first pivot element and the second pivot element forming a pivot joint. The periphery surface of the glass substrate includes a curved outer surface that provides a rounded transition between the planar first surface of the glass substrate and a less-curved outer surface of a side wall of the mirror casing.
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
G02F 1/153 - Dispositifs ou dispositions pour la commande de l'intensité, de la couleur, de la phase, de la polarisation ou de la direction de la lumière arrivant d'une source lumineuse indépendante, p.ex. commutation, ouverture de porte ou modulation; Optique non linéaire pour la commande de l'intensité, de la phase, de la polarisation ou de la couleur basés sur un effet électrochromique - Détails de construction
G02F 1/157 - Association structurelle des cellules avec des dispositifs optiques, p.ex. des réflecteurs ou des dispositifs d’éclairage
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
B24B 49/00 - Appareillage de mesure ou de calibrage pour la commande du mouvement d'avance de l'outil de meulage ou de la pièce à meuler; Agencements de l'appareillage d'indication ou de mesure, p.ex. pour indiquer le début de l'opération de meulage
B24B 9/02 - Machines ou dispositifs pour meuler les bords ou les biseaux des pièces ou pour enlever des bavures; Accessoires à cet effet caractérisés par le fait qu'ils sont spécialement étudiés en fonction des propriétés de la matière propre aux objets à meuler
B24B 13/00 - Machines ou dispositifs conçus pour meuler ou polir les surfaces optiques des lentilles ou les surfaces de forme similaire d'autres pièces; Accessoires à cet effet
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B24B 9/08 - Machines ou dispositifs pour meuler les bords ou les biseaux des pièces ou pour enlever des bavures; Accessoires à cet effet caractérisés par le fait qu'ils sont spécialement étudiés en fonction des propriétés de la matière propre aux objets à meuler de matière inorganique non métallique, p.ex. de la pierre, des céramiques, de la porcelaine du verre
C03C 17/06 - Traitement de surface du verre, p.ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement par des métaux
70.
VEHICULAR ACCESS SYSTEM WITH EXTENDABLE AND RETRACTABLE DOOR HANDLE ASSEMBLY
A vehicular access system includes a door handle assembly having (i) a base mounted at a door of a vehicle, (ii) a handle movable relative to the base and (iii) an electrically operable actuator that is electrically operated to move the handle relative to the base. The handle is movable between a recessed position and a partially extended position. The vehicular access system controls operation of the electrically operable actuator to move the handle between the recessed position and the partially extended position. The vehicular access system detects an authorized user and determines movement of the detected authorized user. Responsive to determination that the authorized user is approaching the door of the vehicle, the vehicular access system unlocks the door handle assembly and controls operation of the electrically operable actuator to move the handle to the partially extended position.
E05B 81/76 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées
E05B 81/06 - Serrures de véhicule actionnées par une force motrice caractérisées par le type d´actionneur utilisé électrique par moteurs rotatifs
E05B 17/10 - Dispositifs d'éclairage sur ou pour les serrures ou clés
E05B 1/00 - Boutons ou poignées pour battants; Boutons, poignées ou boutons à pression pour serrures ou clenches sur battants
E05B 5/00 - Poignées entièrement encastrées à l'intérieur du battant
E05B 77/54 - Verrouillage ou déverrouillage automatique de pênes provoqué par certains paramètres du véhicule, p.ex. par le dépassement d’un seuil de vitesse
E05B 81/14 - Serrures de véhicule actionnées par une force motrice caractérisées par la fonction ou les fins des éléments d’actionnement actionnant les cliquets du pêne, p.ex. pour déclencher le pêne
E05B 81/34 - Serrures de véhicule actionnées par une force motrice - caractérisées par les détails de construction de l'actionneur ou de la transmission de la puissance - Détails de la transmission des moyens d’actionnement à engrenages
E05B 81/58 - Commande d'actionneurs impliquant une commande de durée, p.ex. pour commander la durée de fonctionnement de moteurs électriques
E05B 81/62 - Commande d'actionneurs pour ouvrir ou fermer un circuit en fonction de paramètres électriques, p.ex. augmentation du courant d'un moteur
E05B 83/18 - Serrures pour compartiments à bagages, coffres ou capots de voiture pour coffres arrière de voiture ou compartiments bagages arrière
71.
VEHICLE WINDOW ASSEMBLY WITH BONDED PERIMETER FRAME
A vehicular window assembly includes a window panel having an inner side and an outer side separated from the inner side by a thickness of the window panel. The window panel has a perimeter edge that spans between the inner side and the outer side. A perimeter frame includes a plastic inner frame portion and a polymeric outer frame portion disposed at an outer surface of the inner frame portion. The inner frame portion has an attaching element that is adhesively bonded at the inner side of the window panel to attach the perimeter frame to the window panel. With the attaching element adhesively bonded at the inner side of the window panel, the outer frame portion receives and seals against the perimeter edge of the window panel.
A vehicular access system includes a sensing panel at a door of a vehicle including a panel, at least one capacitive touch sensor for sensing proximity of a user at a touch sensing region of the panel, and a radar sensor sensing exterior of the vehicle. An electronic control unit (ECU) includes a data processor for processing sensor data captured by the radar sensor to detect presence of objects exterior of the vehicle. At least one indicator visually indicates status of the system. Responsive to receiving an open door command, (i) the at least one indicator illuminates and (ii) the system determines, using the sensor data, whether a detected object is within a swing path of the door. The system, responsive to determining that no object is within the swing path of the door, opens the door.
B60R 25/24 - Moyens pour enclencher ou arrêter le système antivol par des éléments d’identification électroniques comportant un code non mémorisé par l’utilisateur
B60R 25/20 - Moyens pour enclencher ou arrêter le système antivol
B60R 25/23 - Moyens pour enclencher ou arrêter le système antivol par la saisie manuelle de codes alphanumériques
E05B 81/78 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées en tant que partie d’un verrouillage ou déverrouillage mains libres
73.
OVERHEAD CONSOLE ACCESSORY SYSTEM WITH SHARED CONTROLS, CAMERAS, AND LIGHTING
A vehicular accessory system includes an overhead console configured to mount at an interior portion of a vehicle, and an interior rearview mirror assembly having a mirror head mounted via mounting structure at the overhead console. The overhead console includes a base portion configured to attach at the interior portion of the vehicle to mount the overhead console at the interior portion and an extending portion that, with the overhead console mounted at the interior portion of the vehicle, extends from the base portion along and spaced from a headliner of the vehicle. The overhead console includes a light source that, with the overhead console mounted at the interior portion of the vehicle, and when electrically operated to emit light, light emitted by the light source illuminates a surface at the interior portion of the vehicle above the overhead console.
A vehicular rear slider window assembly includes a fixed window panel and a movable window panel. Electrically conductive traces are at respective surfaces of the fixed window panel and the movable window panel. A fixed panel electrical connector is affixed at and connected to the electrically conductive traces at the fixed window panel, and a movable panel electrical connector is affixed at and connected to the electrically conductive traces at the movable window panel. A flexible electrical connector includes a movable panel connecting element to connect to the movable panel electrical connector and a fixed panel connecting element to connect to the fixed panel electrical connector. Terminals of the movable panel connecting element disposed at a cover portion connect with respective terminals of the movable panel electrical connector via movement of the cover portion parallel to the longitudinal axes of the terminals of the movable panel electrical connector.
B60J 1/18 - Fenêtres; Pare-brise; Leurs accessoires disposés à l'arrière du véhicule
H05B 3/84 - Dispositions pour le chauffage spécialement adaptées à des surfaces transparentes ou réfléchissantes, p.ex. pour désembuer ou dégivrer des fenêtres, des miroirs ou des pare-brise de véhicules
A vehicular exterior rearview mirror assembly includes a mirror head mounted at a mounting structure. An electro-optic reflective element is attached at an attachment element that attaches at an electrically powered actuator accommodated by the mirror head. The reflective element has a front glass substrate having a first thickness less than 2.3 mm and a rear glass substrate having a second thickness less than or equal to 1.6 mm. The first and second perimeter edges of the glass substrates combine to provide a curved transition from a first surface of the front glass substrate and an outer surface of the mirror head. The mirror head includes a protruding portion that is at least partially received at a notched region of the rear glass substrate. An outer surface of the protruding portion corresponds with the second perimeter edge of the rear glass substrate at the notched region.
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
A vehicular exterior rearview mirror assembly includes a mounting arm and a mirror head at one end of the mounting arm distal from an attachment portion of the mounting arm that is configured for attachment at a vehicle. A mirror reflective element is fixedly attached at the mirror head. An innermost side of the mirror reflective element is attached at a front side of an attachment plate. The mirror reflective element moves in tandem with movement of the mirror head relative to the mounting arm when the driver of the vehicle operates an electrically-operable actuator. The attachment plate includes wall structure that extends from the front side of the attachment plate and circumscribes and spans the perimeter circumferential edge of the glass substrate and does not encroach onto and does not overlap the front surface of the glass substrate of the exterior mirror reflective element.
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
G06F 3/047 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction utilisant un ensemble de fils conducteurs, p.ex. des fils conducteurs croisés
B60R 25/25 - Moyens pour enclencher ou arrêter le système antivol par biométrie
G06F 3/0488 - Techniques d’interaction fondées sur les interfaces utilisateur graphiques [GUI] utilisant des caractéristiques spécifiques fournies par le périphérique d’entrée, p.ex. des fonctions commandées par la rotation d’une souris à deux capteurs, ou par la nature du périphérique d’entrée, p.ex. des gestes en fonction de la pression exer utilisant un écran tactile ou une tablette numérique, p.ex. entrée de commandes par des tracés gestuels
G06F 3/04883 - Techniques d’interaction fondées sur les interfaces utilisateur graphiques [GUI] utilisant des caractéristiques spécifiques fournies par le périphérique d’entrée, p.ex. des fonctions commandées par la rotation d’une souris à deux capteurs, ou par la nature du périphérique d’entrée, p.ex. des gestes en fonction de la pression exer utilisant un écran tactile ou une tablette numérique, p.ex. entrée de commandes par des tracés gestuels pour l’entrée de données par calligraphie, p.ex. sous forme de gestes ou de texte
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
G06F 3/044 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction par des moyens capacitifs
77.
Vehicular exterior rearview mirror assembly with blind spot indicator
A vehicular exterior breakaway rearview mirror assembly includes a skull-cap mirror shell and a reflective element. With the mirror assembly mounted at an exterior side of a vehicle, the skull-cap mirror shell has an inboard wall that faces toward the exterior side of the vehicle. A blind spot indicator is disposed at an aperture established at the inboard wall of the skull-cap mirror shell. An illumination source of the blind spot indicator is activated to illuminate the blind spot indicator responsive to an electronic blind spot monitoring system of the vehicle detecting another vehicle that is approaching or overtaking the equipped vehicle. Illumination of the blind spot indicator by activation of the illumination source is readily viewable by the driver of the equipped vehicle and is not readily viewable by a driver of the detected other vehicle.
A vehicular glass roof panel assembly includes a perimeter frame portion, a glass panel adhesively bonded to the perimeter frame portion, and side rails adhesively bonded along opposite side regions of the perimeter frame portion. The perimeter frame portion includes a plurality of latching elements configured to latch the vehicular glass roof panel assembly at a vehicle roof of a vehicle. With the latching elements latching the vehicular glass roof panel assembly at the vehicle roof, the glass panel extends across the vehicle roof and the side rails extend above respective side doors of the vehicle.
B60J 1/00 - Fenêtres; Pare-brise; Leurs accessoires
B60J 7/16 - Toits amovibles; Toits avec panneaux mobiles du type non coulissant, c. à d. toits ou panneaux mobiles ou amovibles, p.ex. toit ou capote pouvant être facilement enlevés ou mis en position repliée ou inopérante non pliants
A vehicular interior rearview mirror assembly includes a mirror head and a mounting assembly. The mirror casing includes a sidewall having an outer end region that circumscribes an open portion of the mirror casing. The outer end region includes a rounded outer surface curving between the open portion and a less-curved outer surface of the sidewall. The mirror reflective element is disposed at the open portion of the mirror casing. The mirror reflective element has a glass substrate having a rounded perimeter edge of at least 2.5 mm and a thickness of less than 2 mm. Curvature of the rounded outer surface of the outer end region of the sidewall matches curvature of the rounded perimeter edge of the glass substrate to provide a curved transition between a flat region at the front surface of the glass substrate and the less-curved outer surface of the sidewall of the mirror casing.
A vehicular exterior door handle assembly includes a base, a handle movable relative to the base between recessed and deployed positions, an actuator that is operable to move the handle between the positions, and a connection mechanism that pivots relative to the base to move the handle between the positions. The actuator operates to pull and release a cable to pivot the connection mechanism to move the handle. The connection mechanism, when the actuator is operated to pull the cable, pivots in a first direction to move the handle from the recessed toward the deployed position. A biasing element of the connection mechanism biases the connection mechanism in a second direction to move the handle toward the recessed position when the actuator releases the cable. Responsive to cable tension being reduced by a threshold amount, the connection mechanism adjusts to increase tension.
E05B 81/12 - Serrures de véhicule actionnées par une force motrice caractérisées par la fonction ou les fins des éléments d’actionnement
F16C 1/10 - Moyens pour transmettre un mouvement linéaire dans une gaine flexible, p.ex. mécanismes "Bowden"
E05B 79/20 - Liaisons entre parties mobiles de serrure utilisant des liaisons souples, p.ex. des câbles Bowden
E05B 81/04 - Serrures de véhicule actionnées par une force motrice caractérisées par le type d´actionneur utilisé électrique
E05B 81/18 - Serrures de véhicule actionnées par une force motrice caractérisées par la fonction ou les fins des éléments d’actionnement pour déplacer des pênes
E05B 81/24 - Serrures de véhicule actionnées par une force motrice - caractérisées par les détails de construction de l'actionneur ou de la transmission de la puissance
A vehicular rearview mirror control system includes a plurality of rearview mirror assemblies having variable reflectance mirror reflective elements. An electronic control unit receives image data captured by a rear backup camera of the vehicle. The rearview mirror control system, responsive to processing a first subset of received image data captured by the rear backup camera, determines ambient light rearward of the vehicle. The rearview mirror control system, responsive to processing a second subset of received image data captured by the rear backup camera, determines glare light emanating from a headlight of another vehicle following the equipped vehicle. The first subset of received image data is different than the second subset of received image data. The rearview mirror control system generates an output to control dimming of respective ones of the mirror reflective elements of the plurality of rearview mirror assemblies based on location of the determined glare light.
A vehicular dual-state interior rearview mirror assembly includes a mirror head including an electrochromic mirror reflective element having a transflective mirror reflector. A video display device occupies at least 75 percent of the viewable reflective region of the mirror reflective element. With the mirror assembly operating in a first state, the video display device does not display video images and the driver views rearward via reflection at the viewable reflective region and, with the mirror assembly operating in a second state, the video display device displays video images for viewing at the viewable reflective region by the driver. When operating in a daytime mode, the display screen utilizes red pixels, green pixels, blue pixels and clear pixels of the display screen, and when operating in a nighttime mode, the display screen utilizes red pixels, green pixels and blue pixels and does not utilize clear pixels.
A vehicular exterior rearview mirror assembly includes a base portion configured for attachment at an exterior portion of a vehicle, a mirror head having a mirror reflective element, and an actuator within the mirror head. When the mirror actuator is electrically operated, the mirror actuator moves the mirror head and the mirror reflective element together and in tandem relative to the base portion. The mirror reflective element is adhesively attached at a mirror back plate. The mirror back plate is attached at a head mounting plate, which is attached at the mirror actuator. A service recess is at and between the mirror back plate and the head mounting plate and is accessible from exterior the mirror head. The service recess is configured to enable detachment of the mirror back plate, with the mirror reflective element adhesively attached thereto, from the head mounting plate.
B60R 1/06 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule
B62D 65/00 - Tracé, fabrication, p.ex. assemblage, mesures pour faciliter le désassemblage, ou modification de la structure des véhicules à moteurs ou des remorques, non prévus ailleurs
84.
Vehicular driver monitoring system with DMS camera at interior rearview mirror assembly
A vehicular driver monitoring system includes an interior rearview mirror assembly having a mirror head adjustably attached at a mounting base configured to attach at an interior portion of a vehicle. A driver monitoring camera is accommodated by the mirror head so as to move in tandem with the mirror head when the mirror head is adjusted relative to the mounting base to adjust a driver's rearward view. At least one near infrared light emitter is accommodated by the mirror head and is operable to emit near infrared light toward a head region of the driver of the vehicle. Image data captured by the driver monitoring camera is processed to determine driver attentiveness and/or driver drowsiness. The vehicular driver monitoring system adjusts processing of the captured image data to accommodate adjustment of the mirror head when the driver adjusts the mirror head to adjust his or her rearward view.
A vehicular exterior rearview mirror assembly includes a mounting arm and a mirror head. The mounting arm is received through an aperture in the mirror head, and an actuator is attached at the mounting arm within the mirror head. The actuator is operable to adjust the mirror head relative to the mounting arm and includes first and second motors that drive respective first and second gears. The first gear engages an arcuate gear disposed at an attachment element attached at the mirror head, and when the first motor is operated, the arcuate gear and the attachment element pivot relative to the actuator to adjust the mirror head about a first pivot axis. The second gear engages a rotationally fixed gear rotationally fixed to the mounting arm, and when the second motor is operated, the actuator travels about the second gear to adjust the mirror head about a second pivot axis.
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
B60R 1/072 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour régler le miroir par rapport à son boîtier
86.
VEHICULAR EXTERIOR REARVIEW MIRROR ASSEMBLY WITH EXTENDABLE AND RETRACTABLE MIRROR HEAD
A vehicular exterior rearview mirror assembly includes a mirror head and a mounting arm. The mirror head is mounted at the mounting arm via an adjustment mechanism. With the mounting arm attached at a side of a vehicle, an adjustment mechanism is operable to adjust the mirror head relative to the mounting arm between a retracted position and an extended position. The adjustment mechanism includes an actuator that is electrically operable to pivotally adjust a link that includes a first end pivotally attached to the mirror head and a second end pivotally attached at the mounting arm. The adjustment mechanism, when the actuator is operated, moves the mirror head along a path between the retracted and extended positions. The actuator is disposed at the mirror head so that, when the mirror head moves between the retracted and extended positions, the actuator travels along the path with the mirror head.
B60R 1/07 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique
87.
VEHICULAR EXTERIOR DOOR HANDLE ASSEMBLY WITH ILLUMINATION MODULE
A vehicular exterior door handle assembly includes a handle portion and an illumination module having an illumination source that emits light when electrically powered. With the exterior door handle assembly mounted at a door handle region of a vehicle door and when the illumination source is electrically powered to emit light, light emitted by the illumination source illuminates the door handle region of the vehicle door. The illumination module is located and oriented at the vehicular exterior door handle assembly such that, when the illumination source is electrically powered to emit light, a hand grasping the handle portion to open the vehicle door does not block light emitted by the illumination source so that illumination is maintained at the door handle region of the vehicle door.
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60Q 1/32 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer les côtés du véhicule
E05B 17/10 - Dispositifs d'éclairage sur ou pour les serrures ou clés
E05B 85/16 - Poignées pivotant autour d'un axe parallèle au battant le manche de poignée longitudinal pivotant à une extrémité autour d’un axe perpendiculaire à l’axe longitudinal de la poignée
B60R 16/02 - Circuits électriques ou circuits de fluides spécialement adaptés aux véhicules et non prévus ailleurs; Agencement des éléments des circuits électriques ou des circuits de fluides spécialement adapté aux véhicules et non prévu ailleurs électriques
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
88.
Vehicular exterior door system with touch sensors at door handle
A vehicular exterior door system includes a door handle assembly configured for mounting at a door handle region of a vehicle door of a vehicle. The door handle assembly includes a pocket lighting module comprising at least one light emitting diode operable to emit light to illuminate a pocket region of the door handle region. The door handle assembly includes a plurality of touch sensors linearly arranged along a handle portion and generating sensor data based on detection of touch at the respective touch sensor. The vehicular exterior door system, with the door handle assembly mounted at the door handle region, and responsive to processing at the processor of the sensor data generated by individual touch sensors of the plurality of touch sensors, determines a touch event at the door handle assembly and, responsive to the determined touch event, unlocks the vehicle door.
E05B 81/76 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
A vehicular exterior door handle assembly includes a base portion configured to mount at an exterior door handle region of a vehicular door of a vehicle, a handle portion, and a sensing module that includes a light emitter and a light sensor. With the base portion of the handle assembly mounted at the exterior door handle region of the vehicular door, the light emitter is episodically energized to emit light. When the light emitter is not energized to emit light, the light sensor senses ambient light at the handle portion, and when the light emitter is energized to emit light, the light sensor senses emitted light emitted by the light emitter. The sensing module determines presence of a person's hand at the handle portion based at least in part on a difference between the sensed ambient light and the sensed emitted light being below a threshold light level.
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60Q 1/50 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules pour indiquer d'autres intentions ou conditions, p.ex. demandes d'attente ou de dépassement
E05B 41/00 - Serrures à indication visible de la position de verrouillage ou de déverrouillage
F21V 23/04 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des interrupteurs
B60Q 1/00 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet
B60R 25/10 - VÉHICULES, ÉQUIPEMENTS OU PARTIES DE VÉHICULES, NON PRÉVUS AILLEURS Équipements ou systèmes pour interdire ou signaler l’usage non autorisé ou le vol de véhicules actionnant un dispositif d’alarme
B60Q 3/267 - Poignées de portière; Poignées de maintien
E05B 81/76 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées
E05B 17/10 - Dispositifs d'éclairage sur ou pour les serrures ou clés
A vehicular variable reflectance mirror reflective element includes a rear glass substrate joined with a front glass sheet via a perimeter seal. An electrochromic medium disposed in an interpane cavity established between the rear glass substrate and the front glass sheet and bounded by the perimeter seal. With the rear glass substrate joined with the front glass sheet, the front glass sheet is cut at a front glass substrate portion to form a front glass substrate. A back plate is attached at the rear of the rear glass substrate. With the front glass sheet cut at the front glass substrate portions to form the front glass substrate having the rear glass substrate joined therewith via the perimeter seal, and with the back plate fixtured at a finishing tool, the cut edges of the front glass substrate are processed to provide a finished perimeter edge of the front glass substrate.
B60R 1/08 - Dispositions pour les rétroviseurs comprenant des caractéristiques optiques spéciales, p.ex. pour supprimer les zones de non-visibilité
C03C 27/06 - Liaison verre-verre par des procédés autres que la fusion
C03C 17/36 - Traitement de surface du verre, p.ex. du verre dévitrifié, autre que sous forme de fibres ou de filaments, par revêtement avec au moins deux revêtements ayant des compositions différentes un revêtement au moins étant un métal
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
91.
Vehicular interior rearview mirror assembly with video mirror display and VRLC stack
A vehicular interior rearview mirror assembly includes a mounting structure and a mirror head pivotally mounted at the mounting structure via a pivot joint. The mirror head includes a mirror casing and a display and mirror assembly, which includes a frame portion, a video display screen at a front side of the frame portion, and a mirror reflective element at a front side of the video mirror display screen. The mirror reflective element includes a variable reflectivity liquid crystal (VRLC) stack of layers, which have a liquid crystal (LC) layer disposed between a rear glass substrate and a front glass substrate. The front and rear glass substrates are integrated in the VRLC stack of layers. With the mounting structure mounted at an interior portion of a vehicle, the video display screen is operable to display video images derived from video images provided by an ECU of the vehicle.
B60R 1/26 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision prédéterminé vers l’arrière du véhicule
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
A vehicular exterior rearview mirror assembly includes a mirror head pivotally mounted at a mounting arm configured for attachment at a side of a vehicle. The mirror head includes a reflective element. A powerfold actuator is operable to pivot the mirror head relative to the mounting arm between at least a folded position and a drive position. The powerfold actuator includes a primary detent that is engaged to maintain the mirror head at the drive position when the mirror head is pivoted via the powerfold actuator to the drive position. The powerfold actuator includes a secondary detent. Following pivoting via the powerfold actuator of the mirror head to the folded position, when the mirror head is manually pivoted from the folded position to the drive position, the primary detent is disengaged and the secondary detent is engaged to maintain the mirror head at the drive position.
B60R 1/074 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique pour rabattre les rétroviseurs le long du véhicule dans une position de non-utilisation
G02B 7/182 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour miroirs pour miroirs
93.
VEHICULAR FLUSH DOOR HANDLE ASSEMBLY WITH VARIABLE SPEED ACTUATOR
A vehicular exterior door handle assembly includes a base portion disposed at a handle region of a vehicle door, a handle, and an actuator. The actuator includes an electrically-operable motor, an output element mechanically coupled to the handle, and a variable drive element coupled to the output element. When the motor is operated, the actuator causes the drive element to move the output element and move the handle from a recessed position to a deployed position. When moving the handle from the recessed position, the drive element moves the output element at a first speed to move the handle. When the motor is operated to further move the handle, the drive element moves the output element at a second speed to more rapidly move the handle from a partially deployed position toward a deployed position.
A vehicular interior rearview mirror assembly includes a mirror head and a mounting assembly having a mirror mount and a mounting arm, which is configured to attach at an interior portion of a vehicle. The mirror head includes a mirror reflective element. The mounting arm is attached to the mirror head and the mounting arm is pivotally attached at the mirror mount via a first pivot joint. The mirror mount includes an anti-camout element protruding from an interior surface of a socket element of the first pivot joint and at least partially received in a recess of a ball member of the first pivot joint to limit pivotal movement of the ball member when the ball member engages the anti-camout element. The mirror mount comprises a metallic support element forming at least a portion of the anti-camout element.
A method of operating an entry system of a motor vehicle includes monitoring a battery voltage and the entry system continuously using a control circuit of the latch assembly in a non-emergency mode. Power is provided to the control circuit in the event of a loss of power from a main power source using a backup energy source of the control circuit. The method includes transitioning to an emergency mode in response to determining loss of power from the main power source or failure of the component of the entry system. An actuation group associated with the latch assembly is operated with the control circuit using power from the backup energy source of the control circuit in response to determining that actuation from a plurality of pins of a mechanical emergency switch assembly indicates a command from a user to unlatch the closure member in the emergency mode.
E05B 81/90 - Actionnement manuel de secours en cas de panne d’alimentation en énergie
E05F 15/43 - Détection par bords de sécurité sensibles à l'interruption de faisceaux d’énergie, p.ex. lumière ou son
E05F 15/622 - Mécanismes pour battants mus par une force motrice utilisant des actionneurs électriques utilisant des électromoteurs rotatifs pour battants pivotants manœuvrés par mécanismes "pousser-tirer" utilisant des mécanismes à écrou et vis
E05B 81/14 - Serrures de véhicule actionnées par une force motrice caractérisées par la fonction ou les fins des éléments d’actionnement actionnant les cliquets du pêne, p.ex. pour déclencher le pêne
E05B 81/76 - Détection du maniement de la poignée; Détection d’un utilisateur s'approchant d'une poignée; Actions de commutation électrique effectuées par les poignées
E05B 81/86 - Circuits électriques caractérisés par l’alimentation électrique; Alimentation de secours utilisant des condensateurs
96.
Exterior rearview mirror with power extending mechanism
A vehicular exterior rearview mirror assembly includes a mirror head having a mirror reflective element, a support structure configured for attachment at a side of a vehicle, and an adjustment mechanism operable to move the mirror head relative to the support structure between a retracted position and an extended position. A shutoff module includes a body and a plunger movably disposed at the body. The body is attached at one of the mirror head or the support structure and an outer end of the plunger is attached at the other of the mirror head or the body. As the mirror head moves relative to the support structure, an inner end of the plunger moves relative to and along a circuit element of the body. The adjustment mechanism is deactivated responsive to the inner end of the plunger reaching either end of the circuit element.
B60R 1/078 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule montés de façon à être écartés en bloc latéralement, p.ex. quand le véhicule tire une remorque
B60R 1/07 - Dispositions pour les rétroviseurs montés à l'extérieur du véhicule avec une commande à distance pour régler leur position avec un organe actionné par l'énergie électrique
97.
Vehicular exterior lighting assembly with micro-LED lighting devices
A vehicular exterior lighting assembly includes a plurality of lighting devices. The plurality of lighting devices includes a first lighting device operable to emit light for a first lighting function and a second lighting device operable to emit light for a second lighting function. A plurality of micro-LEDs of the lighting devices are disposed at electrically conductive traces of at least one flexible circuit element. Packing density of the micro-LEDs at the at least one flexible circuit element is at least 10 micro-LEDs per square centimeter. Each individual micro-LED of the plurality of micro-LEDs when operated to emit light passes less than 4 mA electrical current. With the vehicular exterior lighting assembly attached at an exterior portion of a vehicle, light emitted by the first lighting device and light emitted by the second lighting device, when operated to emit light, is viewable exterior the equipped vehicle.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60K 35/00 - Agencement ou adaptations des instruments
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
H01L 25/075 - Ensembles consistant en une pluralité de dispositifs à semi-conducteurs ou d'autres dispositifs à l'état solide les dispositifs étant tous d'un type prévu dans le même sous-groupe des groupes , ou dans une seule sous-classe de , , p.ex. ensembles de diodes redresseuses les dispositifs n'ayant pas de conteneurs séparés les dispositifs étant d'un type prévu dans le groupe
A vehicular video mirror system includes a video display screen disposed in a mirror head. The system includes a vehicle-mounted rear backup camera and a trailer-mounted rearward viewing camera. The trailer-mounted camera includes an imaging array with a first subset of pixels representative of an upper rearward-view region of the field of view and a second subset of pixels that represents a lower rearward-view region of the field of view. With the trailer hitched to the vehicle and responsive to the vehicle being set for forward propulsion, the video display screen displays images derived from the first subset of pixels and not from the second subset of pixels. With the trailer hitched to the vehicle and responsive to the vehicle being set for rearward propulsion, the video display screen displays images derived from the second subset of pixels and not from the first subset of pixels.
B60R 1/12 - Ensembles de miroirs combinés avec d'autres objets, p.ex. pendules
B60R 1/00 - Dispositions pour la visibilité optique; Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d’images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules
B60R 1/04 - Dispositions pour les rétroviseurs montés à l'intérieur du véhicule
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
99.
VEHICULAR WINDOW ASSEMBLY WITH SOLDERLESS ELECTRICAL CONNECTION TO HEATER GRID
A vehicular window assembly includes a window panel having an inner surface and an outer surface, electrically conductive traces established at the inner surface of the window panel, a pair of busbars established at the inner surface and in electrical connection with respective portions of the electrically conductive traces, and an electrical connector affixed at each busbar and configured to electrically connect to a wire harness of a vehicle when the vehicular window assembly is installed at the vehicle. The electrical connector includes a bonding portion, a connecting terminal and a busbar-connecting portion. The connecting terminal is configured to electrically connect to the wire harness of the vehicle. The bonding portion is adhesively bonded at the window panel. The electrical connector is bonded at the window panel with the busbar-connecting portion electrically connected to the respective busbar without use of solder.
H05B 3/86 - Dispositions pour le chauffage spécialement adaptées à des surfaces transparentes ou réfléchissantes, p.ex. pour désembuer ou dégivrer des fenêtres, des miroirs ou des pare-brise de véhicules les conducteurs chauffants étant noyés dans le matériau transparent ou réfléchissant
H05B 3/06 - Eléments chauffants combinés constructivement avec des éléments d'accouplement ou avec des supports
H01R 13/631 - Moyens additionnels pour faciliter l'engagement ou la séparation des pièces de couplage, p.ex. moyens pour aligner ou guider, leviers, pression de gaz pour l'engagement uniquement
H01R 13/24 - Contacts pour coopération par aboutage montés élastiquement
H01R 25/16 - Rails ou barres omnibus pourvus de plusieurs points de connexion pour pièces complémentaires
A vehicular exterior door handle assembly includes a base portion disposed at a door handle region of a vehicle door. A handle portion is movable relative to the base portion between a recessed position and a deployed position. An actuator includes a motor that is electrically operable to move the handle portion between the recessed position and the deployed position. The actuator includes a position indicating element that indicates at least one position of an output shaft of the motor. Responsive to an input signal, the actuator moves the handle portion between the recessed position and the deployed position. While the actuator moves the handle portion, the position indicating element indicates that the output shaft arrives at one of the at least one positions and the actuator depowers the motor.