CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Pan, Mao-Song
Wang, Ssu-Hao
Abrégé
A power converter includes a primary-side rectifying/filtering circuit, an AC-DC converter, a DC/DC converter, a primary-side controller, a secondary-side rectifying controller, and a secondary-side feedback controller. The primary-side rectifying/filtering circuit receives an input voltage, and rectifies and filters the input voltage into an adjusted input voltage. The AC-DC converter receives the adjusted input voltage. The primary-side controller provides a first control signal to control the AC-DC converter to convert the adjusted input voltage into a DC input voltage, and provides a second control signal to control the DC-DC converter. The secondary-side rectifying controller provides a third control signal to control the DC-DC converter to convert the DC input voltage into a conversion voltage to supply power to a load according to a gain condition. The secondary-side feedback controller receives a power demand signal provided by the load to control the primary-side controller and the secondary-side rectifying controller.
H02M 7/219 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant continu sans possibilité de réversibilité par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs dans une configuration en pont
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
H02M 1/42 - Circuits ou dispositions pour corriger ou ajuster le facteur de puissance dans les convertisseurs ou les onduleurs
H02M 3/158 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs avec commande automatique de la tension ou du courant de sortie, p.ex. régulateurs à commutation comprenant plusieurs dispositifs à semi-conducteurs comme dispositifs de commande finale pour une charge unique
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chiu, Chen-Hao
Abrégé
An illuminated trackpad includes a substrate, a light guide plate disposed under the substrate, a circuit board disposed under the light guide plate, and light-emitting elements disposed on the circuit board. The light guide plate includes light guide units and through holes. Each light guide unit is composed of light guide microstructures and substantially in the shape of a strip or a line. The through holes are respectively arranged on one side of the light guide units. The circuit board has a touch surface and a non-touch surface. The touch surface has a touch area on which sensing electrodes are disposed. The light-emitting elements are respectively accommodated in the through holes. After entering the light guide plate through inner walls of the through holes, the lights emitted by the light-emitting elements are guided upward through the light guide units to pass through the substrate and exit.
G06F 3/041 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction
G09G 3/06 - Dispositions ou circuits de commande présentant un intérêt uniquement pour l'affichage utilisant des moyens de visualisation autres que les tubes à rayons cathodiques pour la présentation d'un seul caractère, soit en sélectionnant un seul caractère parmi plusieurs, soit en composant le caractère par combinaison d'éléments individuels, p.ex. de segments élémentaires utilisant des sources lumineuses commandées
G06F 3/0354 - Dispositifs de pointage déplacés ou positionnés par l'utilisateur; Leurs accessoires avec détection des mouvements relatifs en deux dimensions [2D] entre le dispositif de pointage ou une partie agissante dudit dispositif, et un plan ou une surface, p.ex. souris 2D, boules traçantes, crayons ou palets
G06F 3/0488 - Techniques d’interaction fondées sur les interfaces utilisateur graphiques [GUI] utilisant des caractéristiques spécifiques fournies par le périphérique d’entrée, p.ex. des fonctions commandées par la rotation d’une souris à deux capteurs, ou par la nature du périphérique d’entrée, p.ex. des gestes en fonction de la pression exer utilisant un écran tactile ou une tablette numérique, p.ex. entrée de commandes par des tracés gestuels
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chiu, Chen-Hao
Abrégé
A light-emitting touch panel includes a circuit board, a plurality of light-emitting elements, a shading plate and a cover plate. The light emitting element has a first height in a first direction. The shading plate has a plurality of spacing regions corresponding to the light emitting elements, respectively. A first width is provided between two partition walls of each spacing region in a second direction. Each partition wall has a second height in the first direction, and the second height is greater than the first height. The cover plate has a light-transmitting region, the light emitted by the light-emitting elements passes through the light-transmitting region, and a bright region is formed on the top surface of the cover plate away from the shading plate, wherein a second width of the bright region in the second direction is related to the second height and the first width.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chen, Chin-Pin
Chen, Yu-Jen
Abrégé
A power supply system includes a plurality of power modules for supplying power to a load, and each power module provides an output current according to a modulation signal, and provides the output current to a power bus through an output end and supply the output current to the load through the power bus. Each power module is connected to a common-connected point of a signal bus to generate a second voltage level, acquires a first ratio according to a full-load output power of the conversion circuit corresponding to the controller and the full-load output power of the power module capable of outputting the maximum power, adjusts the first voltage level according to the first ratio and the second voltage level to adjust the amplified signal by adjusting the first voltage level, and adjusts the output current to a target value corresponding to the first ratio by adjusting the amplified signal.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chiu, Chen-Hao
Abrégé
An illuminated touch module includes a base sheet, a light-shielding sheet, a light guide plate, a light-emitting element, and a cover plate. The base sheet is disposed on a circuit board and has a light reflection area. The light-shielding sheet is disposed above the base sheet and has a side surface and a notch recessed from the side surface. An opening of the notch is aligned with an edge of the base sheet. The light guide plate is embedded in the notch and located above the light reflection area. The light guide plate has a light guide pattern formed by microstructures and has a light incident surface. The light-emitting element is disposed on the circuit board and has a light outputting surface facing the light incident surface and the light guide pattern. The cover plate covers above the light guide plate and the light-shielding sheet.
G06F 3/0354 - Dispositifs de pointage déplacés ou positionnés par l'utilisateur; Leurs accessoires avec détection des mouvements relatifs en deux dimensions [2D] entre le dispositif de pointage ou une partie agissante dudit dispositif, et un plan ou une surface, p.ex. souris 2D, boules traçantes, crayons ou palets
G06F 3/042 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction par des moyens opto-électroniques
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chang, Cheng Yi
Abrégé
A backlight module includes a circuit board, a light-emitting element, and a light guide plate. The light-emitting element is disposed on the circuit board. The light guide plate is located above the circuit board and has adjacent first and second single-key light guide regions. The first single-key light guide region has an accommodating groove accommodating the light-emitting element. The light-emitting surface of the he light-emitting element faces the second single-key light guiding region. The first single-key light guide region has light guide structures extending along the normal direction of the light-emitting surface. The light guide structures include a first group, a second group, and a third group arranged in sequence. The light-emitting surface is opposite to the second group in the normal direction. A spacing of the second group is larger than a spacing of the first group and a spacing of the third group.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Huang, Chun-Ming
Chiu, Chen-Hao
Abrégé
A backlight module includes a glass substrate, a light-outputting sheet, a light guide plate, and a reflective sheet. The light-outputting sheet is disposed under the glass substrate and has a light-outputting region and a light-shielding region. The light-outputting region is disposed corresponding to the glass substrate. The light-shielding region is disposed corresponding to an outer periphery of the glass substrate. The light guide plate is disposed under the light-outputting sheet and has a light guide region and a light mixing region. The light guide region is disposed corresponding to the light-outputting region. The light mixing region is configured to receive light of a light-emitting element and guide the light to the light guide region. The light leaves the light guide region and then sequentially propagates through the light-outputting region and the glass substrate. The reflective sheet is disposed under the light guide plate.
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
G06F 3/0354 - Dispositifs de pointage déplacés ou positionnés par l'utilisateur; Leurs accessoires avec détection des mouvements relatifs en deux dimensions [2D] entre le dispositif de pointage ou une partie agissante dudit dispositif, et un plan ou une surface, p.ex. souris 2D, boules traçantes, crayons ou palets
G02F 1/1335 - Association structurelle de cellules avec des dispositifs optiques, p.ex. des polariseurs ou des réflecteurs
8.
Voltage converter and control method for voltage conversion
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Pan, Mao-Song
Abrégé
A voltage converter includes a feedback controller, a primary-side controller, a secondary-side controller, a primary-side rectification-filtration circuit, a boost converter, and a voltage conversion circuit. The feedback controller receives a voltage demand signal from an output end to output a first feedback signal and a second feedback signal. The primary-side controller generates a boost control signal and a first switching control signal according to the first feedback signal. The secondary-side controller generates a second switching control signal according to the second feedback signal. The boost converter is configured to boost a DC voltage outputted by the primary-side rectification-filtration circuit into a first voltage according to the boost control signal. The operation mode of the voltage conversion circuit is switched between a half-bridge rectification mode and a full-bridge rectification mode according to the first and second switching control signals. A method for voltage conversion is also provided.
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 3/155 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chang, Ting-Wei
Abrégé
A light-emitting module includes a light guide plate, a light-emitting element, a first reflection layer and a second reflection layer. The light guide plate has a light incident surface, a light exit surface, a first surface, and a second surface. The light incident surface has three edges connected sequentially. The first surface, the light exit surface, and the second surface are connected to the edges respectively. The first surface and the second surface are respectively located on opposite sides of the light guide plate. The light exit surface extends away from the light incident surface and is elongated. The light-emitting element is configured to emit light toward the light incident surface. The first reflection layer is disposed corresponding to the first surface to cover the first surface. The second reflection layer is disposed corresponding to the second surface to cover the second surface.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
National Taipei University of Technology (Taïwan, Province de Chine)
Inventeur(s)
Lai, Yen-Shin
Huang, Yong-Yi
Wu, Xiang-Yu
Dong, You-Quan
Wu, Shu-Hao
Abrégé
A resonance conversion device and a universal serial bus circuit are provided. The resonance conversion device includes an input filter circuit, a full-bridge LLC converter circuit, a transformer circuit, a rectifier filter circuit, and a controller. The controller is configured to determine whether an indication voltage of a voltage command is less than or equal to a threshold value and to perform the following steps: in response to the indication voltage being less than or equal to the threshold value, controlling the full-bridge LLC converter circuit into a half-bridge operation mode, and regulating the DC output voltage by performing half-bridge burst mode control on the full-bridge LLC converter circuit based on the DC output voltage; and in response to the indication voltage being greater than the threshold value, regulating the DC output voltage by performing full-bridge burst mode control on the full-bridge LLC converter circuit based on the DC output voltage.
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 3/00 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
H02M 1/08 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Huang, Shih-Nan
Chang, Hao-Chieh
Abrégé
An intelligent stable power supply system includes a first power input module, a first non-return valve module, an active pulse wave generation unit, a DC power processing unit, and a control unit. When the control unit determines that a first voltage value is less than a first predetermined value or greater than a second predetermined value, and a second voltage value is between the first predetermined value and the second predetermined value, the control unit firstly controls the first non-return valve module being from an on state to an off state, and then controls the second non-return valve module being from an off state to an on state so that a power signal of the second power input module flows into the active pulse wave generation unit and the DC power processing unit to output a DC power signal.
H02J 9/06 - Circuits pour alimentation de puissance de secours ou de réserve, p.ex. pour éclairage de secours dans lesquels le système de distribution est déconnecté de la source normale et connecté à une source de réserve avec commutation automatique
H02J 3/00 - Circuits pour réseaux principaux ou de distribution, à courant alternatif
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chiu, Chen-Hao
Abrégé
A backlight assembly includes a reflection sheet, a light-shielding sheet, two light-emitting elements, and a light guide plate. The reflection sheet is disposed on a circuit board and has two through holes. The light-shielding sheet is disposed on the reflection sheet and has a hollow portion having a closed contour. The light-emitting elements are disposed on the circuit board, respectively accommodated in the through holes, and located in the hollow portion. The light guide plate is embedded in the hollow portion and includes two light guide regions. Each of the light guide regions has a light mixing region and a light outputting region. A corresponding one of the light-emitting elements and the light outputting region are respectively located on opposite sides of the first light mixing region. The light-shielding sheet further has a light blocking portion disposed between the light guide regions.
G02B 6/00 - OPTIQUE ÉLÉMENTS, SYSTÈMES OU APPAREILS OPTIQUES - Détails de structure de dispositions comprenant des guides de lumière et d'autres éléments optiques, p.ex. des moyens de couplage
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
G06F 3/041 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu Hao
Pan, Mao-Song
Abrégé
A transformer including a winding frame, a first coil, a second coil, a locating piece, and two iron core pieces is provided. The winding portion has a through hole. The first baffle and the second baffle are respectively and horizontally extended from two opposite ends of the winding portion. The terminal socket is connected to the second baffle. The first coil is wound on the winding portion and electrically coupled to the terminal socket. The second coil is disposed around the first coil and the two are spaced apart from each other. The second coil has a plurality of copper sheets located between the first baffle and the second baffle. The locating piece is correspondingly disposed on the winding frame to locate the second coil. The two iron core pieces are respectively disposed on the second baffle of the winding frame and the locating piece.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Lee, Po-Sheng
Hou, Fu-Teng
Abrégé
An electronic device with a detachable plug includes a main body and a plug body. The main body has a fitting recess, a first conductive terminal group, and a press portion. The first conductive terminal group is disposed in the fitting recess. The press portion is located on at least one side of the fitting recess, and the press portion is formed by at least one exterior side plate and at least one interior side plate of the main body together. A press space exists between the at least one exterior side plate and the at least one interior side plate. The at least one interior side plate has an opening communicating with the fitting recess, and the at least one exterior side plate has a bump passing through the opening. The plug body is detachably configured in the fitting recess of the main body.
H01R 13/66 - Association structurelle avec des composants électriques incorporés
H01R 24/68 - Dispositifs de couplage en deux pièces, ou l'une des pièces qui coopèrent dans ces dispositifs, caractérisés par leur structure générale avec des broches, des lames ou des contacts analogues, assujettis à l'appareil ou à la structure, p.ex. à une paroi montés sur un appareil directement enfichable
H01R 31/06 - Pièces intermédiaires pour joindre deux pièces de couplage, p.ex. adaptateur
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chiu, Chen-Hao
Abrégé
A light-emitting device includes a main body, a light guide plate, and a flexible circuit board. The main body includes a light exit wall and a side wall connected and bent relative to each other. The light exit wall and the side wall together form a groove. The light guide plate has a light exit region and a light mixing region. Microstructures are disposed on the light exit region. At least a part of the light exit region is engaged in the groove. The flexible circuit board has a light-emitting unit. The light-emitting unit is configured to emit light toward a side surface of the light mixing region. The light enters the light guide plate from the side surface of the light mixing region and is totally reflected in the light mixing region, and then is guided to the light exit wall through the microstructures.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Hsiao, Yung-Hung
Yen, Chia-Hsien
Chang, Hao-Chieh
Hsiao, Cheng-Chang
Chen, Da-Shian
Abrégé
A power supply device, a power supply management module and method are provided. The power supply device includes a power supply management module. The power supply management module includes a first and a second power supply module, a detection unit, and a switching control module. The first power supply module includes a first alternating current input end, a first rectifier circuit, and a first switch unit. A first end of the first switch unit is connected to the first rectifier circuit. The second power supply module includes a second alternating current input end, a second rectifier circuit, and a second switch unit. A third end and a fourth end of the second switch unit are connected to the second rectifier circuit and a second end of the first switch unit, respectively. The switching control module controls the first and the second switch unit according to a detection signal.
H02M 7/04 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant continu sans possibilité de réversibilité par convertisseurs statiques
H02M 7/537 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant alternatif sans possibilité de réversibilité par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs, p.ex. onduleurs à impulsions à un seul commutateur
H02M 1/44 - Circuits ou dispositions pour corriger les interférences électromagnétiques dans les convertisseurs ou les onduleurs
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
National Taipei University of Technology (Taïwan, Province de Chine)
Inventeur(s)
Lai, Yen-Shin
Huang, Yong-Yi
Chang, Hao-Chieh
Abrégé
A printed circuit board of a planar transformer includes a first column hole, a second column hole, and a plurality of winding layers. At least one of the winding layers includes a first winding and a second winding connected in series. The first winding surrounds the first column hole and has a first opening direction. The second winding surrounds the second column hole and has a second opening direction. The first opening direction is different from the second opening direction. Consequently, the windings on the plurality of layers may be connected in series through conductive holes of the PCB to increase the number of winding turns.
H05K 1/16 - Circuits imprimés comprenant des composants électriques imprimés incorporés, p.ex. une résistance, un condensateur, une inductance imprimés
Chicony Power Technology Co, Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Lien, Fang-Yi
Ho, Hsuan-Wei
Chen, Tsung-Hsun
Abrégé
A backlight module includes a circuit board, a light-shielding plate, and a light guide plate. The circuit board is provided with first and second light-emitting units. The light-shielding plate is disposed above the circuit board. The light guide plate is disposed between the circuit board and the light-shielding plate and includes first and second single-key light guide areas. The first and second single-key light guide areas respectively have first and second through holes respectively accommodating the first and second light-emitting units. A distance between the geometric center of the first single-key light guide area and that of the light guide plate is greater than a distance between the geometric center of the second single-key light guide area and that of the light guide plate. A current flowing through the first light-emitting unit is greater than a current flowing through the second light-emitting unit.
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chen, Tsung-Hsun
Abrégé
A backlight module includes a flexible circuit board and a light guide plate. A first light source assembly, a second light source assembly, and a positioning member are disposed on the flexible circuit board. The light guide plate is disposed over the flexible circuit board and includes a first single key light guide area, a second single key light guide area, and a connection area. The first single key light guide area has a first through hole accommodating the first light source assembly. The second single key light guide area has a second through hole accommodating the second light source assembly. The connection area is located between the first and second single key light guide areas and has an accommodating hole. The flexible circuit board is overlapped with the light guide plate with the positioning member being accommodated in the accommodating hole.
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
G06F 3/02 - Dispositions d'entrée utilisant des interrupteurs actionnés manuellement, p.ex. des claviers ou des cadrans
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
20.
Backlight module and method of manufacturing the same
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chen, Tsung-Hsun
Abrégé
A backlight module includes a cover plate, a light guide plate, a circuit board, a reflective layer, and a light source. The light guide plate is disposed under the cover plate and has a first hole corresponding to a light-shielding region of the cover plate. The circuit board is disposed under the light guide plate and includes a first substrate and a conductive layer having a through hole. The reflective layer is disposed between the light guide plate and the circuit board and has a second hole. The first substrate is in contact with the reflective layer. The conductive layer is disposed between the first substrate and the reflective layer having a recess recessed into the through hole. The light source is disposed on the circuit board, accommodated in the first hole and the second hole corresponding thereto, and in contact with the conductive layer.
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
CHICONY POWER TECHNOLOGY CO., LTD (Taïwan, Province de Chine)
Inventeur(s)
Hsiao, Yung-Hung
Yen, Chia-Hsien
Hsiao, Cheng-Chang
Li, Che-Han
Zeng, Yu-Xian
Abrégé
A power supply with lightning protection includes a surge voltage suppression apparatus, an electromagnetic interference control circuit, a surge current bypass apparatus, an active bridge rectifier circuit, a power factor correction circuit, and a DC-to-DC conversion circuit. The surge voltage suppression apparatus is used to increase a tolerance of a surge voltage for the power supply. The electromagnetic interference control circuit is coupled to the surge voltage suppression apparatus. The surge current bypass apparatus is used to increase a tolerance of a surge current for the power supply. The active bridge rectifier circuit is used to rectify an input voltage. The power factor correction circuit is used to adjust the rectified input voltage to provide an adjusted input voltage on a bulk capacitor. The DC-to-DC conversion circuit is used to convert the adjusted input voltage into a DC output voltage.
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02H 9/04 - Circuits de protection de sécurité pour limiter l'excès de courant ou de tension sans déconnexion sensibles à un excès de tension
H02H 7/125 - Circuits de protection de sécurité spécialement adaptés pour des machines ou appareils électriques de types particuliers ou pour la protection sectionnelle de systèmes de câble ou ligne, et effectuant une commutation automatique dans le cas d'un chan pour redresseurs pour convertisseurs ou redresseurs statiques pour redresseurs
H02M 7/219 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant continu sans possibilité de réversibilité par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs dans une configuration en pont
H02M 1/42 - Circuits ou dispositions pour corriger ou ajuster le facteur de puissance dans les convertisseurs ou les onduleurs
H02H 3/22 - Circuits de protection de sécurité pour déconnexion automatique due directement à un changement indésirable des conditions électriques normales de travail avec ou sans reconnexion sensibles à un excès de tension de courte durée, p.ex. foudre
22.
LIGHT GUIDE PLATE AND BACKLIGHT MODULE OF ILLUMINATED KEYBOARD
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Cheng, Cheng-Yuan
Ho, Hsuan-Wei
Abrégé
A light guide plate and a backlight module adapted to an illuminated keyboard are provided. The light guide plate includes a single-key light guide region. The single-key light guide region corresponds to a single key. Four diagonal regions of the single-key light guide region has a plurality of microstructures. The area sum of the plurality of microstructures is smaller than the area sum of the four diagonal regions of the single-key light guide region. Through the area control of a plurality of microstructures, the plurality of microstructures of a plurality of keys guide the light to make the brightness of each of the keys is even.
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
G06F 3/02 - Dispositions d'entrée utilisant des interrupteurs actionnés manuellement, p.ex. des claviers ou des cadrans
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Lin, Chen-Chi
Abrégé
A power converter for an LED lighting device includes a primary side circuit, a secondary side circuit, a detecting circuit, a load-dependent circuit, and a feedback circuit. The feedback circuit generates a feedback signal according to a detected signal which the detecting circuit generates according to a second node of the secondary side circuit. The primary side circuit adjusts a duty cycle according to the feedback signal. The secondary side circuit outputs a first output voltage at a first node of the secondary side circuit and outputs a second output voltage at a third node of the secondary side circuit, according to the duty cycle of the primary side circuit. The load-dependent circuit receives the second output voltage and controls an electrical strength between the first node and the second node of the secondary side circuit according to the first output voltage.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Abrégé
A power supply apparatus with step-up and step-down conversion includes a primary-side rectifying/filtering circuit, a step-up converter, a full-bridge LLC converter, a primary-side controller, a secondary-side rectifying/filtering circuit, a voltage regulator, and a secondary-side controller. The primary-side rectifying/filtering circuit rectifies and filters an AC input voltage into a DC input voltage. The primary-side controller controls the step-up converter to step up the DC input voltage to a step-up voltage, and controls the full-bridge LLC converter to convert the step-up voltage to a conversion voltage. The secondary-side rectifying/filtering circuit rectifies and filters the conversion voltage into a DC output voltage. The secondary-side controller controls the primary-side controller to provide the step-up control signal and the conversion control signal and provides a voltage regulation signal to control the voltage regulator so as to regulate the DC output voltage to an output voltage for supplying power to the load.
H02M 3/158 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs avec commande automatique de la tension ou du courant de sortie, p.ex. régulateurs à commutation comprenant plusieurs dispositifs à semi-conducteurs comme dispositifs de commande finale pour une charge unique
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Wang, Wen-Yen
Chang, Ting-Wei
Abrégé
A touchpad module including a light guide plate, a circuit board, a light source, a reflective layer, a thin film, a touch substrate, a cover, and a low light-transmission layer is provided. The light source is disposed on one side of the incident surface of the light guide plate. The thin film overlaps a light-exit surface, a distant surface, and a bottom surface of the light guide plate, and has a first end side and a second end side. The first end side is fixed to a side edge area of the light-exit surface. The second end side is fixed to the reflective layer. The cover is located on one side of the light-exit surface of the light guide plate. The thin film is located between the cover and the light guide plate. The low light-transmission layer is disposed on one side of the cover facing the light guide plate.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Pan, Mao-Song
Su, Yi Ching
Abrégé
The disclosure provides a power supply and an operation method thereof. The power supply includes a power factor correction (PFC) circuit, a resonant conversion circuit and a dead zone control circuit. The PFC circuit performs power factor correction to output a corrected voltage. The resonant conversion circuit is coupled to the PFC circuit to receive the corrected voltage. The resonant conversion circuit converts the corrected voltage into a converted voltage. The dead zone control circuit is coupled to the resonant conversion circuit to receive the switch voltage. The dead zone control circuit controls the PFC circuit to adjust the corrected voltage. The dead zone control circuit observes the change trend of the falling time of the switch voltage in the deadtime by adjusting the corrected voltage. The dead zone control circuit determines the corrected voltage according to the change trend of the switch voltage.
H02M 1/42 - Circuits ou dispositions pour corriger ou ajuster le facteur de puissance dans les convertisseurs ou les onduleurs
H02M 3/00 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu
H02M 1/38 - Moyens pour empêcher la conduction simultanée de commutateurs
H02M 3/337 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs en configuration push-pull
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu Hao
Abrégé
A voltage transforming device is provided. The voltage transforming device boosts an input voltage to generate a boosted voltage in response to a voltage demand from an external device. The voltage transforming device converts the boosted voltage to provide a converted voltage based on a fixed gain condition. In addition, the voltage transforming device converts the converted voltage to provide an output voltage in response to the voltage demand.
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 3/00 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chiu, Chen-Hao
Abrégé
A light-emitting module includes a light-shielding sheet, a light guide plate, a light barrier, a circuit board, and first and second light-emitting elements. The light-shielding sheet includes a first pattern area and a second pattern area. The light guide plate is disposed under the light-shielding sheet and has a microstructure disposed corresponding to the second pattern area. The light barrier is disposed under the light guide plate and has first and second holes. The circuit board is disposed under the light barrier. The first light-emitting element is disposed on the circuit board, enters the first hole, and is configured to emit light toward a bottom surface of the light guide plate. The second light-emitting element is disposed on the circuit board, passes through the second hole, and is configured to emit light toward a side surface of the light guide plate.
H01L 33/48 - DISPOSITIFS À SEMI-CONDUCTEURS NON COUVERTS PAR LA CLASSE - Détails caractérisés par les éléments du boîtier des corps semi-conducteurs
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
H01L 33/58 - DISPOSITIFS À SEMI-CONDUCTEURS NON COUVERTS PAR LA CLASSE - Détails caractérisés par les éléments du boîtier des corps semi-conducteurs Éléments de mise en forme du champ optique
29.
Shell structure and electronic device with shell structure
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Lee, Po-Sheng
Abrégé
A shell structure includes a shell and a shielding cover. The shell has an accommodating space, the accommodating space has an inner wall, and the inner wall has a first buckling portion. The shielding cover is arranged in the accommodating space, the shielding cover has an outer wall, the outer wall corresponds to the inner wall, and the outer wall has a second buckling portion corresponding to the first buckling portion. The first buckling portion and the second buckling portion are buckled with each other to limit relative degrees of freedom of the shell and the shielding cover.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Hsiao, Yung Hung
Yen, Chia Hsien
Li, Che Han
Abrégé
A power conversion module includes a circuit board and a transformer mounted on the circuit board. The transformer includes a primary winding, a plurality of secondary windings, and a magnetic core assembly. The secondary winding includes a plurality of conductive plates each has a main body, two pins and two intermediate segments. The two pins extends along a first direction and couples to the main body via intermediate segments extending along a second direction; the transformer is electrically connected to the circuit board through the pins; wherein the main body has an opening, and the intermediate segments are positioned at two sides of the opening. The magnetic core assembly includes a middle post, and a coil section of the primary winding and the main bodies of the conductive plates are arranged in a staggered configuration and surround the middle post.
H01F 27/30 - Fixation ou serrage de bobines, d'enroulements ou de parties de ceux-ci entre eux; Fixation ou montage des bobines ou enroulements sur le noyau, dans l'enveloppe ou sur un autre support
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Cheng, Chao-Cheng
Ma, Jen-Lung
Abrégé
A welding structure includes a first object and a second object connected to each other. The first object includes a first surface, a second surface, a first bonding surface, a welding portion and a second bonding surface. The first bonding surface is connected to one side of the second surface away from the first surface. The welding portion is disposed on a surface perpendicular and connected to the first bonding surface. One side of the second bonding surface is connected to the welding portion. The second object includes a third surface, a fourth surface, a third bonding surface and a fourth bonding surface. The third bonding surface is corresponding to the first bonding surface and connected to one side of the fourth surface away from the third surface. The fourth bonding surface is corresponding to the welding portion and the second bonding surface.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Sheen, Jyh-Jong
Chien, Hung-Hsiang
Abrégé
A method for correcting pump model includes: obtaining a pump model for a pump, the pump model including a Q-P curve and a Q-H curve at each of a plurality of frequencies; at each frequency, determining a power error based on a zero-flow-rate power or an actual operating point of the pump under one of the frequencies; and determining a corrected pump model based on the pump model and the power error. The determination of the corrected pump model includes: at each frequency, determining a corrected Q-P curve to be the Q-P curve shifted by the power error; determining a Q-H-P surface based on the corrected Q-P curves and the Q-H curves at all the frequencies; at each frequency, determining a head error based on the surface and the power error; and at each frequency, determining a corrected Q-H curve to be the Q-H curve shifted by the head error.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chou, Po-Chien
Lin, Che-Shih
Su, Yi-Wei
Abrégé
A transformer includes a bobbin. The bobbin includes a main body, a connection member, and a terminal base. The main body is wound by a coil. Two sides of the connection member are respectively connected to the main body and the terminal base. A plurality of connection terminals of the coil extend to the terminal base through a wire trough of the main body and are connected to pins of the terminal base. The connection member is cut off by automated machining, and the terminal base is mounted on a surface of a housing of the transformer, and no pin is disposed on the housing. Hence, the overall size of the transformer is effectively reduced.
H01F 5/04 - Dispositions des connexions électriques aux bobines, p.ex. fils de connexion
H01F 27/32 - Isolation des bobines, des enroulements, ou de leurs éléments
H01F 27/30 - Fixation ou serrage de bobines, d'enroulements ou de parties de ceux-ci entre eux; Fixation ou montage des bobines ou enroulements sur le noyau, dans l'enveloppe ou sur un autre support
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chiu, Chen-Hao
Chen, Tsung-Hsun
Abrégé
A touch module includes a circuit board, a light emitting element, a light guide plate, and a reflector plate. The light emitting element is electrically connected to the circuit board, and the light emitting element has an upper light emitting surface. The light guide plate is arranged above the circuit board. The reflector plate is arranged above the light guide plate. The reflector plate includes a first surface facing the light guide plate. The first surface is provided with a light-transmitting region, a light-shielding region, and a light-reflecting region. The light-reflecting region is arranged corresponding to the light emitting element. An area of the light-shielding region is greater than an area of the light-reflecting region. The area of the light-reflecting region is greater than an area of the upper light emitting surface of the light emitting element.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chang, Yi-Cheng
Liu, Shin
Abrégé
A backlight module includes a circuit board, a light-emitting unit, a light-reflecting plate, a light guide plate, and a light-shielding sheet. The light-emitting unit is disposed on the circuit board. The light-reflecting plate is disposed above the circuit board. The light guide plate is disposed above the light-reflecting plate and includes a single-key light guide area. The single-key light guide area includes an accommodating hole and a light-blocking structure. The accommodating hole runs through the single-key light guide area and accommodates the light-emitting unit. The light-blocking structure and the light-emitting unit are arranged in a direction. The light-shielding sheet is disposed above the light guide plate.
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
H01H 13/02 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir - Détails
F21V 11/16 - CARACTÉRISTIQUES FONCTIONNELLES OU DÉTAILS FONCTIONNELS DES DISPOSITIFS OU SYSTÈMES D'ÉCLAIRAGE; COMBINAISONS STRUCTURALES DE DISPOSITIFS D'ÉCLAIRAGE AVEC D'AUTRES OBJETS, NON PRÉVUES AILLEURS Écrans non couverts par les groupes , , ou utilisant des feuilles sans ouvertures, p.ex. fixes
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Pan, Mao-Song
Su, Yi-Ching
Abrégé
The present disclosure relates to a power converter device including a power factor correction circuit, a resonance converter circuit, and a zero voltage switching circuit. The power factor correction circuit is coupled to the primary side rectifier circuit, and includes a first switching circuit, a first control circuit and a first output circuit. The resonance converter circuit includes a second switching circuit and a second control circuit. The second switching circuit is coupled to the first output circuit, and the second control circuit is coupled to the secondary side rectifier circuit. The zero voltage switching circuit is coupled between the first control circuit and the second control circuit. The zero voltage switching circuit is configured to obtain a switching voltage of a switch element in the second switching circuit, and output an adjustment signal to the first control circuit according to the switching voltage.
H02M 1/42 - Circuits ou dispositions pour corriger ou ajuster le facteur de puissance dans les convertisseurs ou les onduleurs
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chen, Chi-Chun
Abrégé
A power converter is provided. A power communication module controls a secondary side voltage control circuit to output a voltage control signal according to a connection state signal. A primary side switch control circuit adjusts an operating frequency of switching a conduction state of an adjustment switch according to the voltage control signal, so as to adjust an output voltage of a transformer circuit.
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
National Taipei University of Technology (Taïwan, Province de Chine)
Inventeur(s)
Lai, Yen-Shin
Huang, Yong-Yi
Chang, Hao-Chieh
Abrégé
A transformer includes a magnetic core set and 2N pairs of windings. The magnetic core set includes a first magnetic core, a second magnetic core, a first magnetic column, and a second magnetic column. Each of the pairs of windings includes a high-voltage side winding and a low-voltage side winding. Each of the pairs of the windings surrounds one of the first and the second magnetic columns. The surrounding direction of the high-voltage side windings surrounding the firs magnetic core is opposite to the surrounding direction of the high-voltage side windings surrounding the second magnetic core.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Abrégé
A backlight module adapted to an illuminated keyboard is provided. The backlight module includes a light source assembly, a light guide film, and a reflective sheet. The light guide film has a top surface, a bottom surface, a through hole and a light-exit pattern. The light source assembly includes a light-emitting component configured to emit light toward the through hole. A size of the through hole is smaller than a size of the light-emitting component. The light-exit pattern is on the bottom surface and encloses the through hole. The reflective sheet is located above the through hole. A size of the reflective sheet is larger than or equal to the size of the through hole. A distance from the through hole to an outer edge of the light-exit pattern is greater than a distance from to the through hole to an outer edge of the reflective sheet.
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
H01H 13/705 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers avec des contacts portés par ou formés à partir de couches dans une structure multicouche, p.ex. interrupteurs à membrane caractérisés par la structure, le montage ou l'agencement des organes d'actionnement, p.ex. des boutons-poussoirs ou des touches
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
NATIONAL TAIPEI UNIVERSITY OF TECHNOLOGY (Taïwan, Province de Chine)
Inventeur(s)
Lai, Yen-Shin
Huang, Yong-Yi
Lee, Chun-Hung
Chang, Hao-Chieh
Abrégé
A planar winding transformer includes a magnetic core set and a multilayer circuit board. The magnetic core set includes two magnetic cores and two magnetic columns. The two magnetic cores are parallel to each other. The multilayer circuit board is disposed between two magnetic cores, and two magnetic columns penetrate through the multilayer circuit board. The multilayer circuit board includes two low voltage winding layers and one high voltage winding layer. Two low voltage winding layers are connected to each other in parallel, and the high voltage winding layer is disposed between two low voltage winding layers. When the high voltage winding layer receives a polarity current, at least one of the low voltage winding layers generates a corresponding induced current. Two magnetic cores and two magnetic columns form a closed path for magnetic flux.
H01F 27/42 - Circuits spécialement adaptés à la modification ou la compensation des caractéristiques électriques des transformateurs, réactances ou bobines d'arrêt
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chen, Tsung-Hsun
Abrégé
An illuminated keyboard comprises a first keycap group, a second keycap group, and a backlight module. Each keycap group includes plural keycaps. The backlight module comprises a first light-emitting unit, a second light-emitting unit, a first resistor, a second resistor, a light guide plate, and a circuit board. The light-emitting elements in the first and second light-emitting units are electrically connected to each other in parallel. The first resistor is electrically connected to the first light-emitting unit in series, and the second resistor is electrically connected to the second light-emitting unit in series. The light guide plate is configured with plural through holes, and the circuit board is disposed under the light guide plate. A first total light-emitting area of the first keycap group is not equal to a second total light-emitting area of the second keycap group.
G06F 3/02 - Dispositions d'entrée utilisant des interrupteurs actionnés manuellement, p.ex. des claviers ou des cadrans
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
G06F 1/16 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES - Détails non couverts par les groupes et - Détails ou dispositions de structure
G06F 3/023 - Dispositions pour convertir sous une forme codée des éléments d'information discrets, p.ex. dispositions pour interpréter des codes générés par le clavier comme codes alphanumériques, comme codes d'opérande ou comme codes d'instruction
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Wu, Yi-Ching
Abrégé
A backlight module includes a light-shielding sheet, a light guide plate under the light-shielding sheet, a reflective sheet under the light guide plate, a main circuit board under the reflective sheet, a light-emitting unit on the main circuit board, a flexible circuit board under the reflective sheet, and an electrical connector electrically connected to the flexible circuit board and the main circuit board. A protrusion of the reflective sheet protrudes into a through hole of the light guide plate. The light-emitting unit passes through an opening of the reflective sheet to be accommodated in a slot hole of the light guide plate. The light-emitting unit is configured to emit light to reach a light exit area of the light-shielding sheet through the light guide plate. The electrical connector is aligned with the through hole or further protrudes into the through hole.
G06F 3/02 - Dispositions d'entrée utilisant des interrupteurs actionnés manuellement, p.ex. des claviers ou des cadrans
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Kan, Wen-Chi
Abrégé
An integrated intelligent building management system is disclosed and includes a cloud management system having a cloud configuration platform, an intelligent building system corresponding to a building and having a ground configuration platform, and an intelligent building kit connected with multiple equipment in the building. The cloud configuration platform establishes multiple cloud configuration files. The intelligent building system obtains one cloud configuration file according to the MAC address and performs a ground configuration procedure confined by the cloud configuration file. When the intelligent building kit communicates with the intelligent building system, the ground configuration platform activates a configuration module corresponding to the kit category of the intelligent building kit to perform configuration to the intelligent building kit and establishes a ground configuration file, and the ground configuration platform exports the ground configuration file to the intelligent building kit to finish the ground configuration procedure.
G05B 15/02 - Systèmes commandés par un calculateur électriques
G06Q 10/06 - Ressources, gestion de tâches, des ressources humaines ou de projets; Planification d’entreprise ou d’organisation; Modélisation d’entreprise ou d’organisation
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Tsai, Jewel
Kan, Wen-Chi
Abrégé
An integrated intelligent building management system and a management method thereof are disclosed. The system includes a first cloud management system having a project management database, an intelligent building system managed by the first cloud management system, and a second cloud management system connecting with the first cloud-management system through a transforming interface. The management method includes the following steps. The first cloud management system receives the corresponding data of the building controlled by the intelligent building system and stores that in the project management database. The second cloud management system is authorized to connect and access the project management database. An access action from the second cloud management system to the project management database is accepted. A format transformation to data corresponding to the access action is performed. The second cloud management system stores the transformed data to a demand database therein.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Tsai, Jewel
Chen, Chen-Hsiang
Abrégé
An integrated intelligent building management system includes: a positioning device, recording and uploading a movement information and a device-assigned ID of a target person; an intelligent building kit, computing a tracking information of the target person in a monitoring range based on multiple location coordinates in multiple time periods, and transforming multiple device-assigned IDs to the same kit-assigned ID when multiple device-assigned IDs are determined to be corresponding to the same target person based on the tracking information, and uploading the kit-assigned ID and the movement information; and an intelligent building system, computing the tracking information of the target person in a monitoring range based on the location coordinates in multiple time periods, and establishing an information connection of multiple kit-assigned IDs when the multiple kit-assigned IDs are determined to be corresponding to the same target person based on the tracking information.
H04W 4/029 - Services de gestion ou de suivi basés sur la localisation
H04W 4/33 - Services spécialement adaptés à des environnements, à des situations ou à des fins spécifiques pour les environnements intérieurs, p.ex. les bâtiments
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Abrégé
A flyback power-converting device includes a transformer circuit, a clamp damping circuit, a first switch, a voltage-reducing circuit and a second switch. The clamp damping circuit and the first switch are coupled to the transformer circuit. The voltage-reducing circuit and the second switch are coupled in series between the clamp damping circuit and the transformer circuit. Through switching of the first switch, the transformer circuit converts an input power to generate a first converted voltage and to enable the clamp damping circuit to store an inductive energy. In addition, when the second switch is turned on, the clamp damping circuit releases the inductive energy to the transformer circuit via the voltage-reducing circuit, so that the transformer circuit generates a second converted voltage according to the inductive energy.
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 1/08 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chang, Tse-Wen
Ho, Cheng-Yi
Cheng, Wen-Yen
Abrégé
An air conditioner at least including a controller, a first fan unit, and a second fan unit arranged parallel to the first fan unit is disclosed. The controller performs a parallel operating control procedure, including a first control mode and a second control mode, to the first fan unit and the second fan unit respectively. When operating under the first control mode, the controller adjusts the rotating speed of one of the first fan unit and the second fan unit based on a first standard air volume, so the two fan units output the air volume equal to or approximate to the first standard air volume. When operating under the second control mode, the controller controls the rotating speed of both the first and second fan units according to a second standard air volume, so the two fan units output the same air volume.
F24F 11/80 - Aménagements de commande ou de sécurité - Détails de construction de tels systèmes pour la commande de la température de l’air fourni
F24F 11/72 - Aménagements de commande ou de sécurité - Détails de construction de tels systèmes pour la commande de l’apport en air traité, p.ex. commande de la pression
F24F 13/08 - Organes de réglage de l'écoulement d'air, p.ex. persiennes, grilles, volets ou plaques directrices
F24F 1/0018 - Climatiseurs individuels pour le conditionnement de l'air, p.ex. éléments séparés ou monoblocs ou éléments recevant l'air primaire d'une station centrale Éléments intérieurs, p.ex. ventilo-convecteurs caractérisés par des ventilateurs
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chang, Ting-Wei
Abrégé
An illuminated touch panel includes a backlight assembly and a cover plate. The backlight assembly includes a light guide plate, and an outer stop. The light guide plate includes a plurality of bar portions and a connecting portion. The plurality of bar portions are separated from each other and arranged side by side. Each of the bar portions includes a pattern dot region, a connecting end and a light entrance end. There is a narrow slot between any two adjacent bar portions. The long axis direction of each of the extending dot regions of the connecting portion is substantially parallel to the length direction of each of the narrow slots. The plurality of light blocking bars of the outer stop are arranged side by side and fitted with the plurality of narrow slots. The cover plate includes a plurality of window regions corresponding to the plurality of pattern dot regions.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Li, Hsieh-Ting
Chen, Yen-Chih
Lee, Po-Sheng
Abrégé
A power supply includes a cover body, a metal plate, a metal clip, a circuit board and a housing. The metal plate is partially disposed in a first space of the cover body. The metal clip is disposed in the first space and electrically connected to the metal plate, and includes an upper spring piece, a lower spring piece and a connecting piece. The connecting piece has a fixing portion corresponding to a gap between the upper and lower spring pieces. The circuit board includes an input portion and an output portion. The input portion is disposed in the gap, and has a protruding part for engaging with the fixing portion. The housing includes an output interface and an opening communicating with an accommodating space of the housing. The cover body is connected to the opening. The output interface is electrically connected to the output portion.
H01R 11/22 - Pièces d'extrémité se terminant par une pince à ressort
H01R 13/66 - Association structurelle avec des composants électriques incorporés
H01R 31/06 - Pièces intermédiaires pour joindre deux pièces de couplage, p.ex. adaptateur
H01R 13/508 - Socles; Boîtiers composés de différentes pièces assemblées par une bride ou par un ressort
H01R 24/68 - Dispositifs de couplage en deux pièces, ou l'une des pièces qui coopèrent dans ces dispositifs, caractérisés par leur structure générale avec des broches, des lames ou des contacts analogues, assujettis à l'appareil ou à la structure, p.ex. à une paroi montés sur un appareil directement enfichable
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chang, Yi-Cheng
Abrégé
An illuminated module includes a light source assembly, a light guide plate, a filter, and a light-shielding sheet. The light source assembly includes a light-emitting component, the light-emitting component being configured to emit light. The light guide plate is on a traveling route of the light, and has a surface and a microstructure. The filter is located on the surface, and has a first area and a second area, the first area and the second area corresponding to the microstructure, where the first area has a first filter characteristic, the second area has a second filter characteristic, and the first filter characteristic is different from the second filter characteristic. The light-shielding sheet is located on the other side of the light guide plate opposite to the filter, and has a transparent opening corresponding to the microstructure. In addition, an illuminated keyboard is provided.
G06F 3/02 - Dispositions d'entrée utilisant des interrupteurs actionnés manuellement, p.ex. des claviers ou des cadrans
F21V 9/08 - CARACTÉRISTIQUES FONCTIONNELLES OU DÉTAILS FONCTIONNELS DES DISPOSITIFS OU SYSTÈMES D'ÉCLAIRAGE; COMBINAISONS STRUCTURALES DE DISPOSITIFS D'ÉCLAIRAGE AVEC D'AUTRES OBJETS, NON PRÉVUES AILLEURS Éléments modifiant les caractéristiques spectrales, la polarisation ou l’intensité de la lumière émise, p.ex. filtres pour réduire l’intensité de la lumière
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chen, Fu-Sung
Chen, Chi-Chun
Abrégé
A low-power-consumption protection circuit includes a load detection module, a secondary feedback control module, and a primary control module. The load detection module is coupled to a current detection unit. The secondary feedback control module is coupled to the load detection module and an isolation unit. The primary control module is coupled to the isolation unit and an isolation switch. When the load detection module detects that the current detection unit outputs a voltage level, the secondary feedback control module transmits a protection signal to the primary control module through the isolation unit.
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02H 7/12 - Circuits de protection de sécurité spécialement adaptés pour des machines ou appareils électriques de types particuliers ou pour la protection sectionnelle de systèmes de câble ou ligne, et effectuant une commutation automatique dans le cas d'un chan pour redresseurs pour convertisseurs ou redresseurs statiques
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
52.
Power converter with over temperature protection compensation
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Abrégé
A power converter with over temperature protection compensation includes a main conversion unit, a primary-side control unit, a secondary-side control unit, a secondary detection circuit, and an over temperature adjustment circuit. The secondary-side control unit obtains a secondary voltage change value through the secondary detection circuit, and the secondary-side control unit correspondingly provides a current change value to the over temperature adjustment circuit according to the secondary voltage change value. The over temperature adjustment circuit provides a temperature control voltage according to the current change value so that the secondary-side control unit determines whether an over temperature protection is activated according to the temperature control voltage.
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
53.
Power converter with over temperature protection compensation
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Abrégé
A power converter with over temperature protection compensation includes a main conversion unit, a primary-side control unit, a primary detection circuit, and an over temperature adjustment circuit. The primary-side control unit obtains a primary voltage change value through the primary detection circuit, and the primary-side control unit correspondingly provides a current change value to the over temperature adjustment circuit according to the primary voltage change value. The over temperature adjustment circuit provides a temperature control voltage according to the current change value so that the primary-side control unit determines whether an over temperature protection is activated according to the temperature control voltage.
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Cheng, Chao-Cheng
Abrégé
A power adapter is disclosed. The first guiding slot of the movable member is inserted with the shaft rod of the plug assembly, and the crack arm performs a rotation around a fixed axis about the shell. Additionally, the second guiding slot of the movable member and the post of the socket assembly are embedded for sliding. The movable member slides in two different directions to drive the socket assembly performing an ascending and lowering movements in a vertical direction, and the plug assembly is driven to rotate around a fixed axis at the same time. Thereby, the overall height is reduced to facilitate storage and carry; additionally, each pin can be stored in the shell to prevent the bag from being pierced and prevent other items in the bag from being scratched.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lee, Po-Sheng
Abrégé
A connector includes a main body, a terminal module, a cable module, a housing and an insulating material. The main body has a first opening and a second opening. The terminal module includes a terminal portion and an insulating portion partially covering the terminal portion. The terminal portion includes plural terminals protruding beyond one side of the insulating portion, a middle portion covered by the insulating portion, and a pin portion exposed from the opposite side of the insulating portion. The cable module has a connecting portion electrically connected to the pin portion. The housing covers the main body and the terminals. The housing has an end portion disposed adjacent to the insulating portion. The end portion is configured with plural third openings. The insulating material which may be poured through the third openings covers the end portion, the connecting portion, the pin portion and the insulating portion, and fills the third openings.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Lin, Chen-Chi
Abrégé
A lamp group switching control device for switching and controlling a first lamp group and a second lamp group is provided. When receiving a first power source for driving the first lamp group, the lamp group switching control device controls that only the first lamp group provides a first light signal regardless of whether a second power source for driving the second lamp group is received. When the first power source is not received and the second power source is received, the lamp group switching control device controls that only the second lamp group provides the second light signal.
H05B 47/20 - Circuits pour faire fonctionner des sources lumineuses en général, c. à d. où le type de source lumineuse n'est pas important pour la protection
B60Q 1/076 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs étant principalement destinés à éclairer la route en avant du véhicule ou d'autres zones de la route ou des environs les dispositifs étant des phares réglables, p.ex. commandés à distance de l'intérieur du véhicule par des moyens électriques
B60Q 1/00 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lin, Yu-Jan
Abrégé
A housing of a power supply includes a first cover and a second cover. The first cover includes a first sideboard and a hook. The first cover is configured with a first opening. The hook is disposed aside a side edge of the first opening and protrudes toward an inner side of the first cover. The second cover includes a second sideboard and a protruding platform. The protruding platform is disposed on the second sideboard and protrudes toward an outer side of the second cover. The protruding platform has a buckle hole. When the first cover is assembled with the second cover, the first sideboard is stacked on the outer side of the second sideboard, the protruding platform is engaged with the first opening, and the hook is engaged with the buckle hole.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Huang, Chung-Wei
Yang, Chu-Chen
Abrégé
A gate driving circuit applied to motor inverter includes first power switch circuit, first and second bootstrap fast charging circuits, and first, second and third capacitors. The first power switch circuit includes first and second power switches. The first bootstrap fast charging circuit is electrically connected to the first power switch. The second bootstrap fast charging circuit is electrically connected to the second power switch. The first capacitor is electrically connected to the first power switch. The second capacitor is electrically connected to the first bootstrap fast charging circuit and first insulated switch. The third capacitor is electrically connected to the second bootstrap fast charging circuit and second insulated switch. When the first power switch is disabled and the second power switch is enabled, an independent power supply enables the second bootstrap fast charging circuit to charge the third capacitor to enable the second insulated switch.
H02P 27/08 - Dispositions ou procédés pour la commande de moteurs à courant alternatif caractérisés par le type de tension d'alimentation utilisant une tension d’alimentation à fréquence variable, p.ex. tension d’alimentation d’onduleurs ou de convertisseurs utilisant des convertisseurs de courant continu en courant alternatif ou des onduleurs avec modulation de largeur d'impulsions
H02K 11/33 - Circuits d’entraînement, p.ex. circuits électroniques de puissance
H02M 1/08 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques
H03K 17/60 - Commutation ou ouverture de porte électronique, c. à d. par d'autres moyens que la fermeture et l'ouverture de contacts caractérisée par l'utilisation de composants spécifiés par l'utilisation, comme éléments actifs, de dispositifs à semi-conducteurs les dispositifs étant des transistors bipolaires
H02P 6/08 - Dispositions pour commander la vitesse ou le couple d'un seul moteur
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
59.
Combination structure of socket of power supply device
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chang, Chih-Yuan
Abrégé
A power supply device includes a housing having a socket opening, and a pair of sliding grooves are formed on the socket opening. A guiding piece is formed at a bottom of each sliding groove, and the guiding piece includes a positioning section and a guiding section. A power socket passes through the sliding grooves along the guiding section, and one side of the power socket is abutted against the positioning section so as to contact the socket opening. A cover plate is provided with a pair of clips corresponding to the sliding grooves, and the clips are inserted into the pair of sliding grooves and abutted against a side of the power socket for positioning the power socket.
H01R 13/44 - Moyens pour empêcher l'accès aux contacts actifs
H01R 13/453 - Volet ou plaque de recouvrement ouvert par l'engagement de la pièce complémentaire
H01R 13/631 - Moyens additionnels pour faciliter l'engagement ou la séparation des pièces de couplage, p.ex. moyens pour aligner ou guider, leviers, pression de gaz pour l'engagement uniquement
60.
Backlight module and illuminated touch device thereof
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Huang, Chun-Ming
Abrégé
An illuminated touch device includes a circuit board, a backlight module, and a cover plate. The backlight module includes a light guide plate, a light source assembly, and a light-shielding bar. The light guide plate includes a first plate body and a second plate body fitted with each other. The first plate body has a plurality of first microstructures, and the second plate body has a plurality of second microstructures. The light-shielding bar is at an outer periphery of the light guide plate and extends at an intersection between the first plate body and the second plate body, for blocking penetration of light between the first plate body and the second plate body. The cover plate includes first transparent regions and second transparent regions respectively corresponding to the first microstructures and the second microstructures.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lin, Ming-Hui
Lee, Po-Sheng
Abrégé
A power converter includes a tubular housing having an accommodation space, a first and a second openings. A power module is disposed in the accommodation space and includes a circuit board and a first fastening portion. A bottom cover is formed with a second fastening portion and first bumps, and the bottom cover is pre-positioned on the tubular housing through the second fastening portion engaged with the first fastening portion. A bottom cover is bonded to the first opening through melting the first bumps by ultrasonic welding. A power cable is inserted through the bottom cover and electrically connected to the circuit board. A power socket is coupled to the second opening.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Hsiao, Yung-Hung
Yen, Chia-Hsien
Chen, Da-Shian
Chang, Hao-Chieh
Hsiao, Cheng-Chang
Abrégé
A power conversion system includes a first and a second energy storage element, a first boost circuit, a switching element, a control circuit and a detection circuit. The first boost circuit is coupled between the first and the second energy storage element. The switching element is coupled to the first boost circuit in parallel. When the first voltage value is lower than a first preset level, the control circuit turns off the switching element and drives the first booster circuit to maintain a second voltage value according to the first voltage value, so that the power conversion system operates in a first state. When the first voltage value is equal to or larger than the first preset level, the control circuit turns on the switching element and turns off the first boost circuit, so that the power conversion system operates in a second state.
H02M 1/36 - Moyens pour mettre en marche ou arrêter les convertisseurs
H02M 3/158 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs avec commande automatique de la tension ou du courant de sortie, p.ex. régulateurs à commutation comprenant plusieurs dispositifs à semi-conducteurs comme dispositifs de commande finale pour une charge unique
H02M 3/04 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques
H02M 1/42 - Circuits ou dispositions pour corriger ou ajuster le facteur de puissance dans les convertisseurs ou les onduleurs
H02M 7/06 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant continu sans possibilité de réversibilité par convertisseurs statiques utilisant des tubes à décharge sans électrode de commande ou des dispositifs à semi-conducteurs sans éléctrode de commande
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Chen, Ke-Cheng
Abrégé
A voltage converting apparatus is provided. A control circuit connects a disturbance element to a voltage-dividing resistor network to disturb a feedback voltage and generate a detection voltage during a resistance detection period, and determines whether the voltage-dividing resistor network is aging according to the detection voltage.
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 1/08 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques
64.
Power supply apparatus with operation mode adjustment function and method of operating the same
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Hsiao, Cheng-Chang
Lu, Wen-Cheng
Hsiao, Yung-Hung
Abrégé
A power supply apparatus includes a rectifier unit, a power factor correction circuit, and a control unit. The control unit correspondingly provides a reference voltage according to an amplitude of an input power source. When a voltage signal corresponding to an inductance current of an inductor of the power factor correction circuit is higher than the reference voltage, the control unit controls an energy release switch of the power factor correction circuit to be repeatedly switched on/off, and when the voltage signal is lower than the reference voltage, the control unit controls the energy release switch to be turned off.
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02M 1/42 - Circuits ou dispositions pour corriger ou ajuster le facteur de puissance dans les convertisseurs ou les onduleurs
H02M 1/08 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chiu, Jung-Ching
Liu, Chien-Lung
Kuo, You-Chen
Abrégé
A power conversion device is provided. The power conversion device includes a path module and a control module. The path module includes a first path and a second path. The control module generates a first control signal for controlling the first path and a second control signal for controlling the second path. When an input voltage value received by the path module is less than a first threshold and a boosting operation is performed for the first time, the control module generates the first control signal to interrupt the first path to stop outputting the input power, and adjusts a duty cycle of the second control signal to a first duty cycle based on an input current value and the input voltage value, so as to stabilize an output voltage value.
H02M 3/158 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs avec commande automatique de la tension ou du courant de sortie, p.ex. régulateurs à commutation comprenant plusieurs dispositifs à semi-conducteurs comme dispositifs de commande finale pour une charge unique
H02M 1/36 - Moyens pour mettre en marche ou arrêter les convertisseurs
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lu, Wen-Yung
Abrégé
A housing device includes a first housing body. The first housing body includes a first housing seat and a first combination structure. The first housing seat has a first bottom surface, a first wall and an extension wall. The first wall and the extension wall are respectively extended from the first bottom surface in a direction away from the first bottom surface, and the extension wall is located at an inner side of the first wall and higher than the first wall. The first combination structure includes a hook, a base and a first bump provided as an energy director. The hook is disposed at a side of the extension wall facing the first wall. The base is protruded from the first wall and located below the hook correspondingly, and the first bump is disposed on the base.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chuang, Chia-Chi
Chang, Hung-Jui
Abrégé
A wire bonding device of a stator of a motor includes an insulating ring, a conductive wire, and a wire-bonding terminal. The insulating ring includes a bottom, an inner sidewall, and an outer sidewall. The inner sidewall is connected to an inner edge of the bottom. The outer sidewall is connected to an outer edge of the bottom. The conductive wire is accommodated in the insulating ring. The conductive wire is covered with an insulating cladding layer. The wire-bonding terminal includes a clamping portion, a protruding portion, and a wire-bonding segment. The clamping portion clamps the conductive wire. An end of the protruding portion is connected to the clamping portion. Another end of the protruding portion protrudes out of the insulating ring. An end of the wire-bonding segment is connected to said another end of the protruding portion.
H02K 3/28 - Schémas d'enroulements ou de connexions entre enroulements
H02K 1/16 - Noyaux statoriques à encoches pour enroulements
H02K 3/38 - Enroulements caractérisés par la configuration, la forme ou la réalisation de l'isolement autour des têtes de bobines, des connexions équipotentielles ou des connexions s'y raccordant
H02K 3/50 - Fixation des têtes de bobines, des connexions équipotentielles ou des connexions s'y raccordant
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Abrégé
A backlight module is adapted to an illuminated keyboard. The backlight module includes a light source assembly and a light guide film. The light guide film has a top surface, a bottom surface, a through hole, a light-incident pattern and a light-exit pattern. The light source assembly includes a light-emitting component configured to emit light toward the through hole. A size of the through hole is smaller than a size of the light-emitting component. The light-incident pattern is located on at least one of the top surface and the bottom surface. The light-exit pattern is located on the bottom surface. A distance from the through hole to the light-exit pattern is greater than a distance from the through hole to the light-incident pattern.
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
H01H 13/705 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers avec des contacts portés par ou formés à partir de couches dans une structure multicouche, p.ex. interrupteurs à membrane caractérisés par la structure, le montage ou l'agencement des organes d'actionnement, p.ex. des boutons-poussoirs ou des touches
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
69.
Keyboard backlight module and manufacturing method thereof
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Chang, Yi-Cheng
Abrégé
A keyboard backlight module includes a light-guiding sheet, a circuit board, a light-emitting element, a reflective sheet and a release film. The circuit board is located on a surface of the light-guiding sheet, and the reflective sheet is located on another surface of the light-guiding sheet opposite to the circuit board. The light-emitting element is located between the circuit board and the light-guiding sheet, and disposed on the circuit board. The light-emitting element emits light into the light-guiding sheet. The release film is located on the light-guiding sheet and the circuit board, and transfers a glue layer on the surface of the light-guiding sheet. The light-guiding sheet includes a plurality of illuminated patterns, and the keyboard backlight module adjusts the illumination uniformity of the light through the reflective sheet, the glue layer and the plurality of illuminated patterns.
H01H 13/83 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers caractérisés par des légendes, p.ex. en Braille, affichage à cristaux liquides, éléments émetteurs de lumière ou éléments optiques
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Hsiao, Jen-Hao
Abrégé
An inrush current test device is adapted to receive an alternating current. The inrush current test device includes: a first isolation coupling component, a positive crossing point pulse generation circuit, an output circuit, and a control circuit. The first isolation coupling component includes a primary side and a secondary side, and is responsive to the alternating current on the primary side and conducts the secondary side. When the secondary side transits from an off state to an on state, the positive crossing point pulse generation circuit generates a positive crossing point pulse. When the control circuit is actuated and the positive crossing point pulse is detected, after delaying for a delay time, the control circuit outputs a control pulse for actuating the output circuit for a first operating time. The output circuit is configured to receive the alternating current and output the alternating current when the output circuit is actuated.
G01R 31/26 - Test de dispositifs individuels à semi-conducteurs
G01R 19/165 - Indication de ce qu'un courant ou une tension est, soit supérieur ou inférieur à une valeur prédéterminée, soit à l'intérieur ou à l'extérieur d'une plage de valeurs prédéterminée
G01R 1/28 - Disposition prévue dans des appareils de mesure pour des valeurs de référence, p.ex. tension étalon, forme d'ondes étalon
G01R 1/36 - Aménagements ou circuits de protection contre les surcharges, pour appareils de mesures électriques
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lin, Chen-Chi
Abrégé
A control apparatus for light emitting diodes (LEDs) includes a voltage conversion unit connected to an LED unit to convert an input voltage to supply the LED unit. A voltage difference detecting unit is connected to the LED unit for detecting an output voltage of the LED unit, and the voltage difference detecting unit includes a first resistor, a second resistor and a transistor. A control unit is connected to the voltage difference detecting unit and a hysteresis driving unit, and the control unit cooperates with the voltage difference detecting unit to provide a predetermined voltage. When the output voltage is less than the predetermined voltage, the control unit notifies the hysteresis driving unit to control the switching unit to be short-circuited, so that the voltage conversion unit stops converting the input voltage to cause the LEDs to be completely extinguished.
H05B 47/20 - Circuits pour faire fonctionner des sources lumineuses en général, c. à d. où le type de source lumineuse n'est pas important pour la protection
H05B 45/58 - Circuits pour faire fonctionner des diodes électroluminescentes [LED] sensibles à la vie des LED; Circuits de protection impliquant la détection de fin de vie des LED
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Lee, Yueh-Heng
Abrégé
A multilayer opto-electronic module includes a circuit board, a first light-emitting assembly, a second light-emitting assembly and a contact sheet. The first light-emitting assembly includes a first light guide sheet, a first light-shielding structure, and a first light-emitting element assembly. The second light-emitting assembly includes a second light guide sheet, a second light-shielding structure, and a second light-emitting element assembly. The second light-shielding structure has a second opening. The second opening corresponds to a first micro structure and a second micro structure. The contact sheet is above the second light-shielding structure. The contact sheet has a top transparent area. The top transparent area corresponds to the second opening.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Lee, Yueh-Heng
Abrégé
An opto-electronic module includes a circuit board, a light-emitting assembly, a contact sheet, a light shielding structure, and an outer block. The circuit board has a surface and a groove on the surface. The light-emitting assembly includes a light guide plate and a light-emitting element set. The contact sheet is above the light guide plate. The light shielding structure is above the light guide plate or below the contact sheet. The light shielding structure has an opening. The opening corresponds to a microstructure. The outer block is at an outer periphery of the light guide plate, there is a gap between the outer block and the light guide plate, and the outer block is between the contact sheet and the circuit board. One end of the groove is in communication with the gap, and the other end of the groove is in communication with the environment outside the opto-electronic module.
G06F 3/041 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
F21V 29/83 - Dispositions de refroidissement caractérisées par des éléments passifs de dissipation de chaleur, p.ex. puits thermiques les éléments comportant des ouvertures, des conduits ou des canaux, p.ex. des trous de rayonnement thermique
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chiu, Jung-Ching
Liu, Chien-Lung
Kuo, You-Chen
Abrégé
A power supply apparatus and a control method thereof are provided. Power conversion is performed according to a switching signal group to provide an output voltage and an output current. An error value between the output voltage and a reference voltage is multiplied by a proportional parameter to obtain a proportional result. The error value is multiplied by an integration parameter to obtain a first calculation value which is then accumulated over time to obtain an integration result. When a slope of the output current is greater than a reference slope and a slope of the output voltage is negative, the slope of the output voltage is multiplied by a differential parameter to obtain a second calculation value which is then added to the integration result over time. A duty cycle of the switching signal group is adjusted according to the sum of the proportional result and the integration result.
H02M 3/156 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs avec commande automatique de la tension ou du courant de sortie, p.ex. régulateurs à commutation
G05F 1/565 - Régulation de la tension ou de l'intensité là où la variable effectivement régulée par le dispositif de réglage final est du type continu utilisant des dispositifs à semi-conducteurs en série avec la charge comme dispositifs de réglage final sensible à une condition du système ou de sa charge en plus des moyens sensibles aux écarts de la sortie du système, p.ex. courant, tension, facteur de puissance
H02M 3/06 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des résistances ou des capacités, p.ex. diviseur de tension
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chiang, Chih-Hsien
Shih, Hung-Ta
Abrégé
A load identification system includes an AC-power input unit, a load, a zero-crossing detector, a microcontroller, a first and a second current phase detectors. The zero-crossing detector is configured to output a zero-voltage pulse signal when a zero-crossing signal of the AC-power input unit is detected. The first current phase detector detects a current flowing through the load to output a first voltage signal. When the current flows along a first direction, the first voltage signal is at a high level. The second current phase detector is configured to detect the current flowing through the load to output a second voltage signal. When the current flows along a second direction, the second voltage signal is at a high level. The microcontroller is configured to receive and identify the type of the load according to the zero-voltage pulse signal, the first and the second voltage signals.
G01R 19/25 - Dispositions pour procéder aux mesures de courant ou de tension ou pour en indiquer l'existence ou le signe utilisant une méthode de mesure numérique
G01R 19/175 - Indications des instants de passage du courant ou de la tension par une valeur déterminée, p.ex. de passage par zéro
G01R 25/00 - Dispositions pour procéder aux mesures de l'angle de phase entre une tension et un courant ou entre des tensions ou des courants
H02M 1/08 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques
H03K 17/13 - Modifications pour commuter lors du passage par zéro
H02M 5/257 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant alternatif, p.ex. pour changement de la tension, pour changement de la fréquence, pour changement du nombre de phases sans transformation intermédiaire en courant continu par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type thyratron ou thyristor exigeant des moyens d'extinction utilisant uniquement des dispositifs à semi-conducteurs
G01R 19/165 - Indication de ce qu'un courant ou une tension est, soit supérieur ou inférieur à une valeur prédéterminée, soit à l'intérieur ou à l'extérieur d'une plage de valeurs prédéterminée
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Tseng, Wen-Ning
Abrégé
An expandable combination electric meter comprises a first electric meter and a second electric meter. The first electric meter includes a processing unit, a first electricity measuring unit, a power supply unit and an expansion connecting unit. The processing unit is coupled with the first electricity measuring unit, the power supply unit and the expansion connecting unit. The power supply unit outputs a working power to the processing unit, the first electricity measuring unit, and the expansion connecting unit. The second electric meter is connected with the first electric meter through the expansion connecting unit. The working power is transmitted to the second electric meter through the expansion connecting unit for enabling the second electric meter.
G01R 19/25 - Dispositions pour procéder aux mesures de courant ou de tension ou pour en indiquer l'existence ou le signe utilisant une méthode de mesure numérique
G01R 22/06 - Dispositions pour la mesure de l'intégrale dans le temps d'une puissance électrique ou d'un courant, p.ex. compteurs d'électricité par des méthodes électroniques
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Abrégé
An illuminated vehicular emblem for a means of transportation includes a housing unit, a lighting unit and a light dimming unit. The housing unit includes a bottom case, a top case disposed on the bottom case, and an emblem member disposed above the top case. A receiving space is defined between the top and bottom cases to receive the lighting unit. The lighting unit includes a light guide plate, light emitting components and a first light shielding film disposed on the light guide plate. The light emitting components are disposed at the light guide plate such that the light guide plate receives light emitted from the light emitting components. The light dimming unit changes the direction of propagation of the light and includes a first dot portion distributed on the light guide plate and along a projection of an outline of the emblem member.
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
B60Q 1/26 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs ayant principalement pour objet d'indiquer le contour du véhicule ou de certaines de ses parties, ou pour engendrer des signaux au bénéfice d'autres véhicules
B60Q 1/00 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet
B60R 13/00 - Eléments pour habiller la carrosserie, l'identifier ou la décorer; Aménagements ou adaptations pour la publicité
78.
Insulation cover fixing structure and protection device
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lee, Po-Sheng
Abrégé
An insulation cover fixing structure and a protection device include a first insulation, a first metal shielding cover and an engaging unit. The first insulation cover includes a first bottom plate and a first side plate. The first metal shielding cover is disposed at an outer side of the first insulation cover. The first metal shielding cover includes a second bottom plate and a second side plate. The engaging unit is disposed on at least one of the first insulation cover and the first metal shielding cover. The first metal shielding cover and the first insulation cover are fixed by the engaging unit. The engaging unit includes a first tongue extended with bend from one of the first side plate and the second side plate toward the other and a second tongue extended from the first tongue. The second tongue is pressed against the other of the first side plate and the second side plate.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Lee, Yueh-Heng
Abrégé
A backlight module is disclosed. The backlight module includes a light emitting component, a first light guide plate and a second light guide plate. The first light guide plate is disposed above the light emitting component and includes a first hole located correspondingly to the light emitting component. The second light guide plate is disposed between the light emitting component and the first light guide plate and includes a second hole. The second hole is located corresponding to the light emitting component and communicates with the first hole. The diameter of the second hole is greater than the diameter of the first hole.
F21V 8/00 - Utilisation de guides de lumière, p.ex. dispositifs à fibres optiques, dans les dispositifs ou systèmes d'éclairage
H01H 13/705 - Interrupteurs ayant un organe moteur à mouvement rectiligne ou des organes adaptés pour pousser ou tirer dans une seule direction, p.ex. interrupteur à bouton-poussoir ayant une pluralité d'éléments moteurs associés à différents jeux de contacts, p.ex. claviers avec des contacts portés par ou formés à partir de couches dans une structure multicouche, p.ex. interrupteurs à membrane caractérisés par la structure, le montage ou l'agencement des organes d'actionnement, p.ex. des boutons-poussoirs ou des touches
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lee, Yueh-Heng
Abrégé
The present disclosure discloses a light emitting device. A plurality of luminous dots disposed on a light guiding plate is distributed on a first area and a second area of the light guiding plate by a first density and a second density, respectively. A plurality of diffusion dots disposed on a diffusion film is distributed on a third area and a fourth area of the diffusion film by a third density and a fourth density, respectively. The first area of the light guiding plate is projected to the third area of the diffusion film, and the second area of the light guiding plate is projected to the fourth area of the diffusion film. A sum of the first density and the third density after an approximation and a sum of the second density and the fourth density after the approximation are both equal to a predetermined value.
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chow, Wing Kai
Abrégé
A soft-start control circuit is provided. The soft-start control circuit includes a load switch, a driving unit and a filtering unit. The first terminal of the load switch is configured to receive an input voltage. The control terminal of the load switch is configured to receive a switching signal and perform switching between on and off according to the switching signal, thereby performing a soft-start operation. The second terminal of the load switch is configured to provide a switched voltage. The driving unit is configured to provide a switching signal according to a control signal and release a parasitic charge stored in the load switch when the load switch is turned off. The filtering unit is configured to convert the switched voltage into an output voltage.
H03K 17/16 - Modifications pour éliminer les tensions ou courants parasites
H03K 17/0812 - Modifications pour protéger le circuit de commutation contre la surintensité ou la surtension sans réaction du circuit de sortie vers le circuit de commande par des dispositions prises dans le circuit de commande
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lin, Chen-Chi
Abrégé
A lighting system suitable for receiving two kinds of power signals includes a light emitting unit, a switch control circuit, first and second power adjustment circuits, and first and second switches. The switch control circuit is electrically connected to the light emitting unit, the first and second switches. When the light emitting unit and the switch control circuit receive a first power signal, the switch control circuit turns on the first switch and turns off the second switch, so that a first current drives the light emitting unit to emit. When the light emitting unit and the switch control circuit do not receive the first power signal and the second power adjustment circuit receives the second power signal, the switch control circuit turns off the first switch and turns on the second switch, so that a second current drives the light emitting unit to emit.
H05B 45/3725 - Alimentation du circuit à découpage [SMPS]
H02M 3/156 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs avec commande automatique de la tension ou du courant de sortie, p.ex. régulateurs à commutation
H05B 45/10 - Commande de l'intensité de la lumière
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Lee, Yueh-Heng
Abrégé
The present disclosure discloses an illuminating keyboard, which includes a light emitting module, a reflection plate and a light guiding plate. The light emitting module includes a circuit board, a plurality of electronic components, and a plurality of light emitting units. The electronic components and the light emitting units is disposed on the circuit board, the electronic components are collectively disposed in an area, the light emitting units surround the area, and the light from the light emitting units is directed outside the area. The reflection plate has a through hole corresponding to the light emitting units. The light guiding plate is disposed above the reflection plate, and has a slot hole corresponding to the through hole. The light emitting units are accommodated in the space formed by the through hole and the slot hole, and the light guiding plate receives the light from the light emitting units.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chiu, Jung-Ching
Liu, Chien-Lung
Kuo, You-Chen
Abrégé
A power converter device includes a first phase-shift full-bridge circuit, a second phase-shift full-bridge circuit, a detector circuit, and a control circuit. The control circuit controls the first phase-shift full bridge circuit and the second phase-shift full bridge circuit. The control circuit disables the second phase-shift full-bridge circuit when the output current is less than a first predetermined value. The control circuit enables the second phase-shift full-bridge circuit when the output current is equal to or greater than the first predetermined value. The control circuit controls a synchronous switching circuit of the second phase-shift full-bridge circuit to operate in a traditional control mode when the output current is equal to or greater than a second predetermined value and a duty cycle of a phase-shift switching circuit is equal to or greater than a third predetermined value. The second predetermined value is greater than the first predetermined value.
H02M 7/00 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant continu; Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant alternatif
H02M 7/523 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant alternatif sans possibilité de réversibilité par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type thyratron ou thyristor exigeant des moyens d'extinction utilisant uniquement des dispositifs à semi-conducteurs avec un circuit résonnant LC dans le circuit principal
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 7/48 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant alternatif sans possibilité de réversibilité par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande
85.
Hybrid type wire-to-wire connector structure and power supply device having the same
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Wu, Cheng-Chan
Huang, Chao-Yi
Lin, Hung-Chieh
Abrégé
A power supply device includes a power supply housing having an accommodating space and an accommodating opening, a hybrid wire-to-wire connector structure and a circuit board disposed in the accommodating space. The hybrid wire-to-wire connector structure includes a connecting seat and an adapter seat. The connecting seat has a signal line terminal and a power line terminal. The connecting seat is disposed in the accommodating opening through an annular rib. The adapter seat has a signal conduction end and a power conduction end. The adapter seat has formed a hook corresponding to the annular rib. The connecting seat and the adapter seat are combined through the signal conduction end inserted in the signal line terminal, the power conduction end inserted in the power line terminal and the hook clamped with the annular rib. Therefore, the power and signal connectors are integrated so as to simplify the assembly.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chang, Tse-Wen
Cheng, Wen-Yen
Abrégé
A method for alerting component efficacy declining of HVAC apparatus includes: continually recording working time of a fan of an HVAC apparatus and controlling a pressure-difference transmitter arranged on both sides of a filter of the HVAC apparatus for calculating current pressure difference; calculating a first-stage slope based on a first pressure-difference condition, an initial pressure difference, and an accumulated working time of the fan when the current pressure difference reaches the first pressure-difference condition; calculating a second-stage slope based on a second pressure-difference condition, the first pressure-difference condition, and the accumulated working time of the fan when the current pressure difference reaches the second pressure-difference condition; predicting a remaining lifetime of the filter based on the first-stage slope if a comparison result between the two slopes is smaller than or equal to a threshold; otherwise, predicting the remaining lifetime of the filter based on the second-stage slope.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chang, Tse-Wen
Ho, Cheng-Yi
Cheng, Wen-Yen
Abrégé
An air handling unit control system is applied to an air handling unit having a plurality of hardware devices. The air handling unit control system includes at least one expansion module and a main controller. The at least one expansion module is configured to be electrically connected to at least one expanded hardware device. The main controller is electrically connected to the expansion module to control the expanded hardware device. The main controller provides a setting interface according to the hardware devices and the expanded hardware device. The setting interface includes a plurality of setting items. When at least one of the setting items is triggered, the main controller executes a corresponding setting procedure according to the triggered setting item to set up the hardware devices and the expanded hardware device.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chang, Tse-Wen
Cheng, Wen-Yen
Abrégé
A control method for an air conditioning system includes: calculating an average heat exchange amount of a coil according to real-time operation information; setting a full-load air volume parameter and a full-load water volume parameter in a heat exchange model according to the real-time operation information and the heat exchange model, and calculating a full-load heat exchange amount; calculating a dynamic margin value based on the average heat exchange amount and the full-load heat exchange amount; determining whether the dynamic margin value is greater than a first preset condition or less than a second preset condition, so that the controller outputs a first control signal or a second control signal respectively to adjust a coil water inlet temperature; and when the dynamic margin value is less than the first preset condition and greater than the second preset condition, maintaining the current setting state.
F24F 11/87 - Aménagements de commande ou de sécurité - Détails de construction de tels systèmes pour la commande de la température de l’air fourni en commandant l’absorption ou la restitution de chaleur dans des éléments extérieurs
F24F 140/12 - Pression du fluide échangeur de chaleur
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Lee, Yueh-Heng
Abrégé
The present disclosure discloses a light emitting touchpad device including a circuit board, a plurality of sensing elements, a light guiding plate, a plurality of first spacing blocks, and a plurality of second spacing blocks. The sensing elements are disposed on the circuit board. Each of the first spacing blocks and each of the second spacing blocks are respectively disposed on a bottom surface and a top surface of the light guiding plate, and are all located in a nil-light spot area of the light guiding plate. A spacing distance between two adjacent first spacing blocks is a third length. A spacing distance between two adjacent second spacing blocks is a fifth length. A position of any one of the second spacing blocks corresponds to a position between two of the first spacing blocks.
G06F 3/0354 - Dispositifs de pointage déplacés ou positionnés par l'utilisateur; Leurs accessoires avec détection des mouvements relatifs en deux dimensions [2D] entre le dispositif de pointage ou une partie agissante dudit dispositif, et un plan ou une surface, p.ex. souris 2D, boules traçantes, crayons ou palets
G06F 3/0488 - Techniques d’interaction fondées sur les interfaces utilisateur graphiques [GUI] utilisant des caractéristiques spécifiques fournies par le périphérique d’entrée, p.ex. des fonctions commandées par la rotation d’une souris à deux capteurs, ou par la nature du périphérique d’entrée, p.ex. des gestes en fonction de la pression exer utilisant un écran tactile ou une tablette numérique, p.ex. entrée de commandes par des tracés gestuels
G06F 1/16 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES - Détails non couverts par les groupes et - Détails ou dispositions de structure
G06F 3/041 - Numériseurs, p.ex. pour des écrans ou des pavés tactiles, caractérisés par les moyens de transduction
G06F 3/02 - Dispositions d'entrée utilisant des interrupteurs actionnés manuellement, p.ex. des claviers ou des cadrans
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Ho, Hsuan-Wei
Lee, Yueh-Heng
Abrégé
The present disclosure discloses a light emitting touch pad device including a circuit board, a plurality of sensing elements, a light guiding plate, a light emitting component, and a plurality of first spacing blocks. The sensing elements are disposed on the circuit board, and a distance between geometric centers of two adjacent sensing elements is a first length. The light guiding plate is disposed above the circuit board, and includes at least one light spot area and at least one nil-light spot area. The light emitting component emits light toward the light guiding plate. The first spacing blocks are disposed on the light guiding plate, and are located in the nil-light spot area. A distance between geometric centers of two adjacent first spacing blocks is a second length, and a spacing distance between two adjacent first spacing blocks is a third length.
G06F 3/0354 - Dispositifs de pointage déplacés ou positionnés par l'utilisateur; Leurs accessoires avec détection des mouvements relatifs en deux dimensions [2D] entre le dispositif de pointage ou une partie agissante dudit dispositif, et un plan ou une surface, p.ex. souris 2D, boules traçantes, crayons ou palets
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Abrégé
A power converter with over temperature protection compensation includes a main conversion unit, a primary-side control unit, a primary detection circuit, and an over temperature adjustment circuit. The primary-side control unit obtains a primary voltage change value through the primary detection circuit, and the primary-side control unit correspondingly provides a current change value to the over temperature adjustment circuit according to the primary voltage change value. The over temperature adjustment circuit provides a temperature control voltage according to the current change value so that the primary-side control unit determines whether an over temperature protection is activated according to the temperature control voltage.
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
92.
Power converter with over temperature protection compensation
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Abrégé
A power converter with over temperature protection compensation includes a main conversion unit, a primary-side control unit, a secondary-side control unit, a secondary detection circuit, and an over temperature adjustment circuit. The secondary-side control unit obtains a secondary voltage change value through the secondary detection circuit, and the secondary-side control unit correspondingly provides a current change value to the over temperature adjustment circuit according to the secondary voltage change value. The over temperature adjustment circuit provides a temperature control voltage according to the current change value so that the secondary-side control unit determines whether an over temperature protection is activated according to the temperature control voltage.
H02M 1/32 - Moyens pour protéger les convertisseurs autrement que par mise hors circuit automatique
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
93.
Method of measuring output current through resistance compensation and conversion circuit thereof
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Peng, Tso-Jen
Wang, Ssu-Hao
Abrégé
A method of resistance compensation for measuring output current includes the following steps: (a) providing a secondary side loop of a conversion unit, and the secondary side loop includes a sense resistor and the first line. (b) providing a control unit for controlling the conversion unit, and the control unit is coupled to the first line and the sense resistor. (c) utilizing a first current to flow through the secondary side loop to obtain a first equivalent line resistance of the first line. (d) providing a second current by the control unit flowing through a loop of the sense resistor, the first line and the control unit to obtain a second equivalent line resistance of the second line. (e) compensating the sense resistor by the control unit according to the first equivalent line resistance and the second equivalent line resistance.
G01R 19/10 - Mesure d'une somme, d'une différence, ou d'un rapport
G01R 27/16 - Mesure de l'impédance d'un élément ou d'un réseau dans lequel passe un courant provenant d'une autre source, p.ex. câble, ligne de transport de l'énergie
G01R 19/00 - Dispositions pour procéder aux mesures de courant ou de tension ou pour en indiquer l'existence ou le signe
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lu, Wen-Yung
Abrégé
A connecting structure includes a first connecting portion and a second connecting portion. The first connecting portion includes a first board and a second board. The first board includes a first body, an extension board and a main rib. The first body extends toward a second object. The extension board is disposed on the first body. The main rib is connected to a first object and disposed along the first body and the extension board. The second board connects to the first object, the first body, and the extension board. The second connecting portion includes a base connecting to the second object and a non-closed columnar body connecting to the base. The non-closed columnar body includes a blocking wall extending toward the first object and a bottom board disposed on the blocking wall. The blocking wall and the bottom board form an accommodating space corresponding to the extension board.
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Lu, Jung-Chang
Abrégé
A plug includes a first member and a second member detachably connected to each other. The first member includes four conductors, which are separated from each other. The third and fourth conductors are selectively electrically connected to the first and second conductors, respectively. The second member includes four pins. The first and second pins are electrically connected to the first and second conductors, respectively, and are selectively electrically connected to the third and fourth conductors, respectively. The third and fourth pins are electrically connected to the first and second pins, respectively. The first and second pins are separated from each other, and the third and fourth pins are separated from each other. A power supply configured with the plug and a power connector are also provided.
H01R 13/64 - Moyens pour empêcher, bloquer ou éviter le couplage incorrect
H01R 29/00 - Pièces de couplage pour coopération sélective avec une pièce complémentaire de différentes façons pour établir différents circuits, p.ex. pour la sélection de tension, pour la sélection série-parallèle
H01R 27/00 - Pièces de couplage adaptées à la coopération avec plusieurs pièces complémentaires dissemblables
96.
Totem-pole bridgeless PFC conversion device and method of operating the same
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Huang, Wen-Nan
Chen, Ching-Guo
Abrégé
A totem-pole bridgeless PFC conversion device includes a conversion unit, a control unit, a current detecting unit and a phase detecting unit. When the control unit determines that a peak value of an input current is within a predetermined interval between a positive current value and a negative current value based on a current signal of the current detecting unit and a phase signal of the phase detecting unit, the control unit controls the conversion unit to operate in a discontinuous conduction mode (DCM). When the control unit determines that the peak value of the input current is not within the predetermined interval, the control unit controls the conversion unit to operate in a critical conduction mode (CRM).
H02M 1/42 - Circuits ou dispositions pour corriger ou ajuster le facteur de puissance dans les convertisseurs ou les onduleurs
H02M 1/088 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques pour la commande simultanée de dispositifs à semi-conducteurs connectés en série ou en parallèle
H02M 7/04 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant continu sans possibilité de réversibilité par convertisseurs statiques
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
97.
Voltage compensation circuit and voltage compensation method
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chen, Wei-Yuan
Liu, Yu-Chen
Abrégé
A voltage compensation circuit and a voltage compensation method are provided. The voltage compensation circuit detects the load current provided by a power supply, generates a load voltage according to the load current, and compares the load voltage with at least one reference voltage to generate a switch control signal. The voltage compensation circuit further drives the at least one switch according to the switch control signal, provides a compensation resistance value according to the at least one switch that is turned on, and provides a compensation voltage to the power supply, so that the power supply provides a precise output voltage.
H02M 3/156 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu sans transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs avec commande automatique de la tension ou du courant de sortie, p.ex. régulateurs à commutation
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chiu, Huan-Chih
Abrégé
A resonant power conversion device includes a primary side circuit, a frequency detecting circuit, a resonant converting circuit, a secondary side circuit, a secondary detecting circuit, and a control circuit. The primary side circuit receives, according to a control signal having a primary frequency, an input power to output a primary side power. The frequency of the primary side power corresponds to the primary frequency. The frequency detecting circuit detects and converts the primary frequency into a corresponding potential. The resonant converting circuit electrically couples the primary side power to output a resonant power. The secondary side circuit converts the resonant power into a secondary side power. The secondary detecting circuit detects the secondary side power and correspondingly generates a voltage signal. The control circuit outputs the control signal according to the voltage signal, and doesn't output the control signal when the corresponding potential is higher than a predetermined level.
H02M 3/335 - Transformation d'une puissance d'entrée en courant continu en une puissance de sortie en courant continu avec transformation intermédiaire en courant alternatif par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrodes de commande pour produire le courant alternatif intermédiaire utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 1/08 - Circuits spécialement adaptés à la production d'une tension de commande pour les dispositifs à semi-conducteurs incorporés dans des convertisseurs statiques
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
99.
Smart curtain system and method of adjusting opening of curtain dynamically
CHICONY POWER TECHNOLOGY CO., LTD. (Taïwan, Province de Chine)
Inventeur(s)
Chang, Tse-Wen
Cheng, Wen-Yen
Yang, Shen-Min
Abrégé
A smart curtain system and a method of adjusting opening of curtain dynamically are provided. The system has a sensing apparatus, a control apparatus and a curtain apparatus. The sensing apparatus retrieves an environmental sensing parameter set. The control apparatus determines a parameter of insolation reaching indoor, a parameter of air-condition loading and a parameter of outputted illumination according to the environmental sensing parameter set, and generates a curtain control signal according to the parameter of insolation reaching indoor, the parameter of air-condition loading and the parameter of outputted illumination. The curtain apparatus adjusts a current opening of a curtain according to the curtain control signal for adjusting an area of obscured sunshine. The present disclosed example can effectively save energy, provide better indoor comfort, and improve user experience.
G05B 15/02 - Systèmes commandés par un calculateur électriques
E06B 9/68 - Dispositifs ou mécanismes de manœuvre, p.ex. à entraînement électrique
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
Chicony Power Technology Co., Ltd. (Taïwan, Province de Chine)
Inventeur(s)
Chou, Chun-Fu
Abrégé
A power supply device includes a first conversion module and a second conversion module. The first conversion module is adapted to convert a first alternating current into a first direct current and includes a first body, a first input portion having a first alternating current input terminal, a first output portion having a first output terminal, and a first coupling portion having a first coupling terminal. The first coupling terminal and the first output terminal are connected. The second conversion module is adapted to convert a second alternating current into a second direct current and includes a second body, a second input portion having a second alternating current input terminal, a second coupling portion having a second coupling terminal, a third coupling portion having a third coupling terminal, and a second output portion having a second output terminal. The second output terminal and the second coupling terminal are connected.
H02J 1/00 - Circuits pour réseaux principaux ou de distribution, à courant continu
H02J 7/00 - Circuits pour la charge ou la dépolarisation des batteries ou pour alimenter des charges par des batteries
H02J 7/02 - Circuits pour la charge ou la dépolarisation des batteries ou pour alimenter des charges par des batteries pour la charge des batteries par réseaux à courant alternatif au moyen de convertisseurs