09 - Appareils et instruments scientifiques et électriques
Produits et services
Component feature of an electronic test and signal equipment for use in locating buried power cables and utility lines, namely, audiovisual signaling feature that warns users of the existence of cables and pipes
09 - Appareils et instruments scientifiques et électriques
Produits et services
Component feature of an electronic test and signal equipment for use in locating buried power cables and utility lines, namely, electronic signal-processing tool that identifies and rejects electrical interference
09 - Appareils et instruments scientifiques et électriques
Produits et services
Ground penetrating radar apparatus; instrumentation, namely, transducers in the nature of radio frequency ultra-wide bandwidth antennas, receivers and transmitters, electronic circuitry, embedded and providing online downloadable post data acquisition imaging software for inspection of concrete, asphalt and other building materials to determine the construction attributes, presence of flaws, location of embedded objects such as wires, conduits, rebar, post tension cables and similar items, and material layer thickness; providing online downloadable signal processing technology system comprising of hardware in the nature of field programmable gate array, system-on-module, analog and digital conversion and digital processors and downloadable software used in ground penetrating radar systems that allows dynamic adjustment of ground penetrating radar sensitivity applied in a wide range of subsurface sensing applications to enhance the measured data by providing dynamic reduction in ambient noise; mobile ground penetrating radar system for three-dimensional imaging, detection, location, and mapping of subsurface structures, consisting of non-metallic wheeled platform for manually transporting ground penetrating geophysical radar sensors and ancillary items over the ground surface, integrated odometer, power supply, control computer, display device in the nature of tablets and custom designed display monitors with embedded processors with real-time subsurface imaging output, subsurface imaging instruments used for subsurface detection, water content determination, material property monitoring, rock mechanics and building structure monitoring and failure detection, cable failure detection, level detection, plus replacement and structural parts therefore, namely, transmitters in the nature of ultra-wideband pulsed radar technology, receivers in the nature of radio frequency ultra-wide bandwidth antenna receivers with signal processing, antennas, transducers in the nature of radio frequency ultra-wide bandwidth, signal processors, signal displays in the nature of tablets and custom designed display monitors with embedded processors with real-time subsurface imaging output, and providing online downloadable signal processing software for data filtering and enhancing and controlling instrument operation; subsurface detecting, delineating and profiling systems and constituent parts thereof, namely, transmitters in the nature of ultra-wideband pulsed radar technology, transducers in the nature of radio frequency ultra-wide bandwidth transmitters and receivers, antennas, signal processors, signal recorders in the nature of high fidelity and high speed analog to digital conversion and signal processing and displays in the nature of tablets and custom designed display monitors with embedded processors with real-time subsurface imaging output, and downloadable computer operating software; equipment used for determining snow depth, thickness, quality or water content, namely, associated downloadable software for determining snow depth, thickness, quality or water content and computer, sold as a unit; spatial positioning technology system used for creating maps of snow depth, thickness, quality or water content, namely, transmitters in the nature of radio frequency ultra-wideband pulsed radar technology, receivers in the nature of radio frequency ultra-wide bandwidth antenna receivers with signal processing, antennas, time reflectometry transducers, signal processors, computers, signal processing devices in the nature of high fidelity and high speed analog to digital conversion, field programmable gate array and system-on-module signal processing, providing online downloadable display software used for displaying maps of snow depth, thickness, quality or water content generated by spatial positioning technology system, and satellite global positioning systems (GPS) inertial and doppler positioning instruments used for navigation; providing online downloadable software used for displaying three-dimensional radar data, sonic acoustic electromagnetic data or any other type of data of similar format in chart form using color or grey level to indicate the third dimension, the data having been acquired by instruments used to map buried objects such as pipes and cables, soil layers, water depth, and audio signal frequency strengths versus time
09 - Appareils et instruments scientifiques et électriques
35 - Publicité; Affaires commerciales
Produits et services
(1) Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes, and drains; electromagnetic field detectors. (1) Advertising and marketing services provided by means of social media.
An evaporatively cooled refrigeration system includes a refrigerant, a gas/liquid separator, an expansion valve in fluid connection to the gas/liquid separator, an evaporator to receive the refrigerant from the expansion valve, a compressor configured to compress the refrigerant in fluid connection to the evaporator, and a gas cooler in fluid connection to the compressor. The gas cooler includes an indirect heat exchanger to convey the refrigerant and facilitate heat from the refrigerant and a spray system to spray an evaporative coolant on the indirect heat exchanger. Evaporative cooling provided by the evaporative coolant on the coil is configured to cool the refrigerant below a dry bulb ambient air temperature.
09 - Appareils et instruments scientifiques et électriques
35 - Publicité; Affaires commerciales
Produits et services
geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes, and drains; electromagnetic field detectors advertising and marketing services provided by means of social media
13.
EVAPORATIVELY COOLED REFRIGERATION SYSTEM AND METHOD
An evaporatively cooled refrigeration system includes a refrigerant, a gas/liquid separator, an expansion valve in fluid connection to the gas/liquid separator, an evaporator to receive the refrigerant from the expansion valve, a compressor configured to compress the refrigerant in fluid connection to the evaporator, and a gas cooler in fluid connection to the compressor. The gas cooler includes an indirect heat exchanger to convey the refrigerant and facilitate heat from the refrigerant and a spray system to spray an evaporative coolant on the indirect heat exchanger. Evaporative cooling provided by the evaporative coolant on the coil is configured to cool the refrigerant below a dry bulb ambient air temperature.
F25B 9/00 - Machines, installations ou systèmes à compression dans lesquels le fluide frigorigène est l'air ou un autre gaz à point d'ébullition peu élevé
F28D 5/00 - Appareils échangeurs de chaleur comportant des ensembles de canalisations fixes pour une seule des sources de potentiel calorifique, les deux sources étant en contact chacune avec un côté de la paroi de la canalisation, utilisant l'effet réfrigérant
A multiple mode hybrid heat exchanger apparatus includes a frame assembly, an indirect heat exchange section, a spray system, an intermediate distribution basin, a direct heat exchange section, a vertical passage, a lower air inlet, a cold water collection basin, and a fan. The multiple mode hybrid heat exchanger is selectably configured to operate in an evaporative mode, a dry mode, and an adiabatic mode. The evaporative mode of operation includes activation of the spray system over the indirect heat exchange section, air enters the vertical passage through the direct heat exchange section, and the airflow also passes through the indirect heat exchange section. The dry mode of operation includes deactivation of the spray system, air enters the vertical passage through the direct heat exchange section, and the airflow then passes through the indirect heat exchange section. The adiabatic mode of operation includes the spray system is bypassed on the indirect heat exchange section, the direct heat exchange section is configured to facilitate a passage of water therethrough.
A multiple mode hybrid heat exchanger apparatus includes a frame assembly, an indirect heat exchange section, a spray system, an intermediate distribution basin, a direct heat exchange section, a vertical passage, a lower air inlet, a cold water collection basin, and a fan. The frame assembly includes a first end wall, a second end wall that opposes the first end wall, a first side wall that extends between the first and second end walls, and a second side wall that opposes the first side wall that extends between the first and second end walls. The direct heat exchange section is disposed below the indirect heat exchange section. The vertical passage is defined by the frame and the direct heat exchange section. The lower air inlet is defined by a plurality of openings n the direct heat exchange section. The lower air inlet is configured to provide an inlet for air into the vertical passage, The cold water collection basin is disposed below the direct heat exchange section. The fan is to induce a flow of air through the lower air inlet. The multiple mode hybrid heat exchanger is selectably configured to operate in an evaporative mode, a dry mode, and an adiabatic mode. The evaporative mode of operation includes activation of the spray system over the indirect heat exchange section, air enters the vertical passage through the direct heat exchange section, and the airflow also passes through the indirect heat exchange section. The dry mode of operation includes deactivation of the spray system, air enters the vertical passage through the direct heat exchange section, and the airflow then passes through the indirect heat exchange section. The adiabatic mode of operation includes the spray system is bypassed on the indirect heat exchange section, the direct heat exchange section is configured to facilitate a passage of water therethrough. The air enters the vertical passage through the direct heat exchange section, the air passing horizontally across a flow of water to directly cool the water. The water is collected in the cold water collection basin. The airflow then passes through the indirect heat exchange section.
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
F28D 3/02 - Appareils échangeurs de chaleur comportant des ensembles de canalisations fixes pour une seule des sources de potentiel calorifique, les deux sources étant en contact chacune avec un côté de la paroi de la canalisation, dans lesquels l'autre source d avec canalisations tubulaires
F28F 27/00 - Commandes ou dispositifs de sécurité spécialement adaptés pour les appareils d'échange ou de transfert de chaleur
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
(1) Software-as-a-service services featuring software for design and specification of evaporative cooling towers, fluid coolers, and condensers in the fields of HVAC, commercial refrigeration, industrial cooling and process cooling
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Software-as-a-service services featuring software for design and specification of evaporative cooling towers, fluid coolers, and condensers in the fields of HVAC, commercial refrigeration, industrial cooling and process cooling.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Ground penetrating radar apparatus instrumentation, namely, transducers, electronic circuitry, embedded and post data acquisition imaging software for inspection of concrete, asphalt and other building materials to determine the construction attributes, presence of flaws, location of embedded objects such as wires, conduits, rebar, post tension cables and similar items, and material layer thickness; signal processing technology namely hardware and software used in ground penetrating radar systems that allows dynamic adjustment of ground penetrating radar sensitivity applied in a wide range of subsurface sensing applications to enhance the measured data by providing dynamic reduction in ambient noise; mobile ground penetrating radar system for three-dimensional imaging, detection, location, and mapping of subsurface structures, consisting of non-metallic wheeled platform for manually transporting ground penetrating geophysical radar sensors, integrated odometer, power supply, control computer/display device and ancillary items over the ground surface; subsurface imaging instruments used for subsurface detection, water content determination, material property monitoring, rock mechanics and building structure monitoring and failure detection, cable failure detection, level detection, plus parts therefore, namely, transmitters, receivers, antennas, transducers, signal processors, signal displays, and signal processing software for data filtering and enhancing and controlling instrument operation; subsurface detecting, delineating and profiling systems and constituent parts thereof namely, transmitters, transducers, antennas, signal processors, signal recorders and displays and computer software; equipment used for determining snow depth, thickness, quality or water content, namely associated software and computer spatial positioning technology used for creating maps of snow depth, thickness, quality or water content, namely transmitters, receivers, antennas, time reflectometry transducers, signal processors, computers, signal processing, display software and satellite global positioning systems (GPS) inertial and doppler positioning instruments used for navigation; software used for displaying three-dimensional radar data, sonic acoustic electromagnetic data or any other type of data of similar format in chart form using color or grey level to indicate the third dimension, the data having been acquired by instruments used to map buried objects such as pipes and cables, soil layers, water depth, and audio signal frequency strengths versus time.
09 - Appareils et instruments scientifiques et électriques
Produits et services
(1) Ground penetrating radar apparatus; instrumentation, namely, transducers, electronic circuitry, embedded and post data acquisition imaging software for inspection of concrete, asphalt and other building materials to determine the construction attributes, presence of flaws, location of embedded objects such as wires, conduits, rebar, post tension cables and similar items, and material layer thickness; signal processing technology comprising of hardware and software used in ground penetrating radar systems that allows dynamic adjustment of ground penetrating radar sensitivity applied in a wide range of subsurface sensing applications to enhance the measured data by providing dynamic reduction in ambient noise; mobile ground penetrating radar system for three-dimensional imaging, detection, location, and mapping of subsurface structures, consisting of non-metallic wheeled platform for manually transporting ground penetrating geophysical radar sensors, integrated odometer, power supply, control computer/display device and ancillary items over the ground surface; subsurface imaging instruments used for subsurface detection, water content determination, material property monitoring, rock mechanics and building structure monitoring and failure detection, cable failure detection, level detection, plus parts therefore, namely, transmitters, receivers, antennas, transducers, signal processors, signal displays, and signal processing software for data filtering and enhancing and controlling instrument operation; subsurface detecting, delineating and profiling systems and constituent parts thereof namely, transmitters, transducers, antennas, signal processors, signal recorders and displays and computer software; equipment used for determining snow depth, thickness, quality or water content, namely associated software and computer spatial positioning technology used for creating maps of snow depth, thickness, quality or water content, namely transmitters, receivers, antennas, time reflectometry transducers, signal processors, computers, signal processing, display software and satellite global positioning systems (GPS) inertial and doppler positioning instruments used for navigation; software used for displaying three-dimensional radar data, sonic acoustic electromagnetic data or any other type of data of similar format in chart form using color or grey level to indicate the third dimension, the data having been acquired by instruments used to map buried objects such as pipes and cables, soil layers, water depth, and audio signal frequency strengths versus time.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Counter-drone system comprised of computer hardware and recorded computer software for the detection, location, tracking, and jamming of radio communications of drones and their controllers; radar apparatus for detection and tracking of drones and their controllers; electro-optical and infrared sensors for detection and tracking of drones; radio frequency transmission jamming apparatus
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Software-as-a-service services featuring software for design and specification of evaporative cooling towers, fluid coolers, and condensers in the fields of HVAC, commercial refrigeration, industrial cooling and process cooling
09 - Appareils et instruments scientifiques et électriques
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Hardware for radio frequency spectrum, signal detection, monitoring, classification, management and location equipment, namely, radio frequency receivers, digital converters, configurable drop receivers, signal processors, and wideband and narrowband signal data storage devices to allow replay, review, and analysis of recorded data; a complete system for signal monitoring and intelligence applications providing signal survey, detection, classification, acquisition, demodulation, recording, geo-location and analysis of radio frequency signals in high frequency, very high frequency and ultra-high frequency and microwave, frequency ranges, comprised of radio frequency receivers, digital converters, configurable drop receivers, signal processors, wideband IQ recording devices and narrowband IQ signal data storage on a server computer, electronic signal database, optional emitter direction finding sensors comprised of antenna arrays, radio frequency receivers, and processors and geo-location sub-systems comprised of a network of direction-finding sensors Development and implementation of software, hardware, and technology solutions for the purposes of radio frequency spectrum monitoring, classification, and management, to enable automatic detection of radio signals, measurement of angle of arrival of radio signals, recording of radio signals for review and analysis as well as locating equipment and managing databases
25.
Systems and methods for providing a fixture supporting different levels of permanence
A system configured to provide supplemental heating or cooling is provided. Some embodiments may include the fixture having an air movement device and a back surface configured for a flush mount on a wall, the back surface having a recess sized to substantially the same dimensions of a cover of an electrical outlet. The flush mount may provide a degree of permanence for the fixture that satisfies a criterion.
F24F 1/0314 - Climatiseurs individuels monoblocs pour le conditionnement de l'air, c. à d. avec tout l'appareillage nécessaire au traitement placé dans une enveloppe caractérisés par des aménagements de montage montés sur un mur
The present disclosure relates to a cooling tower. The cooling tower includes a fill media, a water distribution system to distribute water to the fill media, a basin to collect the water, and a shield disposed within the tower.
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
The present disclosure relates to a cooling tower. The cooling tower includes a fill media, a water distribution system to distribute water to the fill media, a basin to collect the water, and a shield disposed within the tower.
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; and parts and fittings for all the aforesaid goods.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; and parts and fittings for all the aforesaid goods.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; and parts and fittings for all the aforesaid goods
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; and parts and fittings for all the aforesaid goods
The present disclosure relates to a cooling tower having a fill media, water distribution system, plenum, and an ultraviolet (UV) light emitter. The water distribution system distributes water to the fill media. A flow of air passes through the fill media and past a flow of the water and out of the cooling tower via an outlet. The plenum is defined by a volume between the fill media and the outlet. The UV light emitter is disposed in the plenum and configured to inactivate or kill organisms in a drift.
A61L 9/20 - Désinfection, stérilisation ou désodorisation de l'air utilisant des phénomènes physiques des radiations des ultraviolets
C02F 1/32 - Traitement de l'eau, des eaux résiduaires ou des eaux d'égout par irradiation par la lumière ultraviolette
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
F28C 1/02 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec contre-courant uniquement
F28C 1/04 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec courant croisé uniquement
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
The present disclosure relates to a cooling tower having a fill media, water distribution system, plenum, and an ultraviolet (UV) light emitter. The water distribution system distributes water to the fill media. A flow of air passes through the fill media and past a flow of the water and out of the cooling tower via an outlet. The plenum is defined by a volume between the fill media and the outlet. The UV light emitter is disposed in the plenum and configured to inactivate or kill organisms in a drift.
F28C 1/02 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec contre-courant uniquement
F28C 1/04 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec courant croisé uniquement
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
C02F 1/32 - Traitement de l'eau, des eaux résiduaires ou des eaux d'égout par irradiation par la lumière ultraviolette
A61L 9/20 - Désinfection, stérilisation ou désodorisation de l'air utilisant des phénomènes physiques des radiations des ultraviolets
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
The present disclosure relates to a cooling tower having a fill media, water distribution system, plenum, and an ultraviolet (UV) light emitter. The water distribution system distributes water to the fill media. A flow of air passes through the fill media and past a flow of the water and out of the cooling tower via an outlet. The plenum is defined by a volume between the fill media and the outlet. The UV light emitter is disposed in the plenum and configured to inactivate or kill organisms in a drift.
C02F 1/32 - Traitement de l'eau, des eaux résiduaires ou des eaux d'égout par irradiation par la lumière ultraviolette
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
C02F 103/02 - Eau non contaminée, p.ex. pour l'alimentation industrielle en eau
41 - Éducation, divertissements, activités sportives et culturelles
Produits et services
Educational services, namely, providing training, workshops, and non-downloadable webinar training to engineers, contractors, architects, facilities managers, and general consumers in the field of HVAC
36.
System and apparatus for detecting faults in an insulation layer of a buried conductor
Methods, systems and locators for detecting faults in an insulation layer of an insulated conductor buried beneath a ground surface are described. The locator comprises a magnetometer arranged to detect a magnetic field generated by the alternating current and to generate a current signal on the basis of the detected magnetic field, and an Alternating Voltage Gradient receiver comprising a pair of probes arranged to make electrical contact with the ground surface, which is arranged to generate a voltage signal indicative of a voltage between the pair of probes. A processor is configured to substantially synchronously sample the current signal and the voltage signal. This enables improved detection of faults in the insulation layer of the insulated conductor.
41 - Éducation, divertissements, activités sportives et culturelles
Produits et services
Educational services, namely, providing workshops, non-downloadable service contractor webinar training and training to engineers, contractors and facilities managers in the field of heating, ventilation, air conditioning, refrigeration, and process cooling
The present disclosure relates to a modular heat exchange tower that has a plurality of air inlet modules each having stanchion disposed therein. The modular heat exchange tower also includes a series of heat exchange modules positioned above the air inlet modules along with a series of plenum modules position above said heat exchange modules.
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
C09K 5/08 - Substances qui ne subissent pas de changement d'état physique lors de leur utilisation
41.
MODULAR HEAT EXCHANGE TOWER AND METHOD OF ASSEMBLING SAME
The present disclosure relates to a modular heat exchange tower that has a plurality of air inlet modules each having stanchion disposed therein. The modular heat exchange tower also includes a series of heat exchange modules positioned above the air inlet modules along with a series of plenum modules position above said heat exchange modules.
B23P 15/26 - Fabrication d'objets déterminés par des opérations non couvertes par une seule autre sous-classe ou un groupe de la présente sous-classe d'échangeurs de chaleur
F28F 9/00 - Carters; Boîtes de distribution; Supports auxiliaires pour les éléments; Eléments auxiliaires dans les carters
F28F 25/08 - Planches ou grilles d'éclaboussement, p.ex. pour convertir la pulvérisation de liquides en films de liquides; Eléments ou couches pour accroître l'aire de la surface de contact
42.
Modular heat exchange tower and method of assembling same
The present disclosure relates to a modular heat exchange tower that has a plurality of air inlet modules each having stanchion disposed therein. The modular heat exchange tower also includes a series of heat exchange modules positioned above the air inlet modules along with a series of plenum modules position above the heat exchange modules.
F28F 25/10 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour l'alimentation en gaz ou en vapeur
F28C 1/02 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec contre-courant uniquement
09 - Appareils et instruments scientifiques et électriques
Produits et services
(1) Signal-processing tool that identifies and rejects electrical interference sold as a component part of electronic test and signal equipment for use in locating buried power cables and utility lines
09 - Appareils et instruments scientifiques et électriques
Produits et services
(1) Audiovisual signaling feature sold as a component part of electronic test and signal equipment for use in locating buried power cables and utility lines
09 - Appareils et instruments scientifiques et électriques
Produits et services
Component feature of an electronic test and signal equipment for use in locating buried power cables and utility lines, namely, electronic signal-processing tool that identifies and rejects electrical interference
09 - Appareils et instruments scientifiques et électriques
Produits et services
Component feature of an electronic test and signal equipment for use in locating buried power cables and utility lines, namely, audiovisual signaling feature that warns users of the existence of cables and pipes
09 - Appareils et instruments scientifiques et électriques
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Computer software modules for radio frequency spectrum monitoring and management; computer software for database management. Development, support, and updating of computer software relating to radio frequency spectrum monitoring and management and database management.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Recorded computer operating software for geophysical apparatus and instruments and electromagnetic field detectors; Downloadable computer operating software for geophysical apparatus and instruments and electromagnetic field detectors geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; parts and fittings for all the aforesaid goods
09 - Appareils et instruments scientifiques et électriques
Produits et services
Computer software for geophysical apparatus and instruments and electromagnetic field detectors; geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; parts and fittings for all the aforesaid goods.
Methods, systems and locators for detecting faults in an insulation layer of an insulated conductor buried beneath a ground surface are described. The locator comprises a magnetometer arranged to detect a magnetic field generated by the alternating current and to generate a current signal on the basis of the detected magnetic field, and an Alternating Voltage Gradient receiver comprising a pair of probes arranged to make electrical contact with the ground surface, which is arranged to generate a voltage signal indicative of a voltage between the pair of probes. A processor is configured to substantially synchronously sample the current signal and the voltage signal. This enables improved detection of faults in the insulation layer of the insulated conductor.
Methods, systems and locators for detecting faults in an insulation layer of an insulated conductor buried beneath a ground surface are described. The locator comprises a magnetometer arranged to detect a magnetic field generated by the alternating current and to generate a current signal on the basis of the detected magnetic field, and an Alternating Voltage Gradient receiver comprising a pair of probes arranged to make electrical contact with the ground surface, which is arranged to generate a voltage signal indicative of a voltage between the pair of probes. A processor is configured to substantially synchronously sample the current signal and the voltage signal. This enables improved detection of faults in the insulation layer of the insulated conductor.
The disclosure is directed to an obstruction lighting and power line control system. The system includes at least one light source, at least one controller coupled to and configured to control the at least one light source, a power line cable providing power to the at least one light source, and a power supply coupled to the power line cable and configured to provide power to the at least one light source over the power line cable. The disclosure further includes a system controller configured to control the power supply to provide power over the power line cable to the at least one light source and the at least one controller that indicates at least one of the following: operating parameters and operating modes.
The disclosure is directed to an obstruction lighting and power line control system. The system includes at least one light source, at least one controller coupled to and configured to control the at least one light source, a power line cable providing power to the at least one light source, and a power supply coupled to the power line cable and configured to provide power to the at least one light source over the power line cable. The disclosure further includes a system controller configured to control the power supply to provide power over the power line cable to the at least one light source and the at least one controller that indicates at least one of the following: operating parameters and operating modes.
A hybrid fluid cooler assembly that provides increased heat exchange. The apparatus includes a plurality of adjacently spaced arrays, each array having a plurality of cooling conduits in combination a direct heat exchange portion. In addition, the apparatus includes an airflow inlet that provides a single air flow current that traverses the direct heat exchange portion and then the indirect heat exchange portion in series.
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
F28D 7/06 - Appareils échangeurs de chaleur comportant des ensembles de canalisations tubulaires fixes pour les deux sources de potentiel calorifique, ces sources étant en contact chacune avec un côté de la paroi d'une canalisation les canalisations ayant une courbure en U unique
F28D 21/00 - Appareils échangeurs de chaleur non couverts par l'un des groupes
F28F 9/013 - Supports auxiliaires pour les éléments pour les tubes ou les assemblages de tubes
F28F 19/06 - Prévention de la formation de dépôts ou de la corrosion, p.ex. en utilisant des filtres en utilisant des revêtements, p.ex. des revêtements vitreux ou émaillés de métal
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
A hybrid fluid cooler assembly that provides increased heat exchange. The apparatus includes a plurality of adjacently spaced arrays, each array having a plurality of cooling conduits in combination a direct heat exchange portion. In addition, the apparatus includes an airflow inlet that provides a single air flow current that traverses the direct heat exchange portion and then the indirect heat exchange portion in series.
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
F28D 1/047 - Appareils échangeurs de chaleur comportant des ensembles de canalisations fixes pour une seule des sources de potentiel calorifique, les deux sources étant en contact chacune avec un côté de la paroi de la canalisation, dans lesquels l'autre source d avec des canalisations d'échange de chaleur immergées dans la masse du fluide avec canalisations tubulaires les canalisations étant courbées, p.ex. en serpentin ou en zigzag
The present disclosure relates to a modular heat exchange tower including a first module having a first basin disposed therein and a second module having a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
63.
Flume apparatus and method for modular heat exchange tower
The present disclosure relates to a modular heat exchange tower including a first module having a first basin disposed therein and a second module having a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
F28C 1/04 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec courant croisé uniquement
F28F 25/10 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour l'alimentation en gaz ou en vapeur
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
64.
IMPROVED SUCTION HOOD FLUME APPARATUS AND METHOD FOR MODULAR HEAT EXCHANGE TOWER
The present disclosure relates to a modular heat exchange tower comprising a first module comprising a first basin disposed therein and a second module comprising a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
65.
IMPROVED FLUME APPARATUS AND METHOD FOR MODULAR HEAT EXCHANGE TOWER
The present disclosure relates to a modular heat exchange tower comprising a first module comprising a first basin disposed therein and a second module comprising a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
The present disclosure relates to a modular heat exchange tower comprising a first module comprising a first basin disposed therein and a second module comprising a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
F28C 1/04 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec courant croisé uniquement
B01F 3/04 - Mélange, p.ex. dispersion, émulsion, selon les phases à mélanger de gaz ou de vapeurs avec des liquides
B23P 15/26 - Fabrication d'objets déterminés par des opérations non couvertes par une seule autre sous-classe ou un groupe de la présente sous-classe d'échangeurs de chaleur
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
E04B 1/348 - Structures composées d'unités comportant au moins des parties importantes des deux côtés d'une pièce, c. à d. unités en forme de boîtes ou de cellules closes ou en forme de carcasses
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains and structural parts and fittings therefor; electromagnetic field detectors and structural parts and fittings therefor
A lighting status signaling system including a lighting fixture having a light, a light driver connected to the light, and a monitor circuit connected to the light and to the light driver. The monitor circuit is configured to monitor a voltage level at an output of the light driver. A sensing circuit is coupled to the monitor circuit via a sensing wire independent of a power wire to the lighting fixture. A lighting controller is connected to the sensing circuit via the sensing wire and configured to determine a lighting status of the lighting fixture.
H05B 33/08 - Circuits pour faire fonctionner des sources lumineuses électroluminescentes
F21V 25/02 - Dispositifs de sécurité associés structuralement avec les dispositifs d'éclairage entrant en action quand le dispositif d'éclairage est dérangé, démonté ou cassé
F21V 23/00 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage
F21W 111/06 - Utilisation ou application des dispositifs ou des systèmes d'éclairage pour la signalisation, le balisage ou l'indication, non prévues dans les groupes pour les pistes pour aéronefs ou les voies similaires
The present disclosure relates to a modular heat exchange tower including a first module having a first basin disposed therein and a second module having a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
F28C 1/04 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec courant croisé uniquement
B01F 3/04 - Mélange, p.ex. dispersion, émulsion, selon les phases à mélanger de gaz ou de vapeurs avec des liquides
B23P 15/26 - Fabrication d'objets déterminés par des opérations non couvertes par une seule autre sous-classe ou un groupe de la présente sous-classe d'échangeurs de chaleur
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
E04B 1/348 - Structures composées d'unités comportant au moins des parties importantes des deux côtés d'une pièce, c. à d. unités en forme de boîtes ou de cellules closes ou en forme de carcasses
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
F28F 25/00 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement
The present invention relates to a fan cylinder bracing system for a cooling tower having a fan deck that extends along a longitudinal axis. The bracing system has a first ring having a first diameter wherein the first ring is located at a first position along the longitudinal axis. It also has a second ring having a second diameter wherein the second ring is located at a second position along the longitudinal axis. Finally, the cylinder bracing system has a first brace connected to the first ring and said second ring, wherein said first brace transfers loads from the first ring to the second ring.
The present disclosure relates to a modular heat exchange tower having a first module that includes a first basin disposed therein and a second module having a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
F28C 1/00 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération
F28C 1/04 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec courant croisé uniquement
B23P 15/26 - Fabrication d'objets déterminés par des opérations non couvertes par une seule autre sous-classe ou un groupe de la présente sous-classe d'échangeurs de chaleur
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
75.
MODULAR HEAT EXCHANGE TOWER AND METHOD OF ASSEMBLING SAME
The present disclosure relates to a modular heat exchange tower comprising a first module comprising a first basin disposed therein and a second module comprising a second basin disposed therein. The aforementioned modular heat exchange tower may also include heat exchange sections, which are disposed in the first module and the second module. The first module and the second module may be assembled prior to being transported to a job site and installed in the modular heat exchange tower.
09 - Appareils et instruments scientifiques et électriques
37 - Services de construction; extraction minière; installation et réparation
42 - Services scientifiques, technologiques et industriels, recherche et conception
Produits et services
Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for the conduction, distribution, conversion, storage, regulation and management of electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin-operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire-extinguishing apparatus; geophysical apparatus and instruments; geophysical surveying apparatus and instruments; parts and accessories for all the aforesaid goods. Building construction; repair of scientific, surveying, measuring, signalling, recording, sound and/or image transmitting, or data processing apparatus, instruments and equipment; installation of scientific, surveying, measuring, signalling, recording, sound and/or image transmitting, or data processing apparatus, instruments and equipment; repair, installation and maintenance of geophysical apparatus and instruments; repair, installation and maintenance of geophysical surveying apparatus and instruments. Scientific and technological services and research and design relating thereto; industrial analysis and research services; design and development of computer hardware and software for computers and software; scientific services, technical services, design services and services in the field of research for geophysical apparatus and instruments; scientific services, technical services, design services and services in the field of research for geophysical surveying apparatus and instruments.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors and parts and fittings for all the aforesaid goods
78.
Heating appliance with light and sound and corresponding method
A heater includes: a controller; a user input operatively connected to the controller; and a lighting system operatively connected to, and controlled by, the controller, the lighting system configured to illuminate outside the heater along a length of the heater. A method of displaying light includes: attaching a lighting system to a heater; operatively connecting the lighting system to a controller; operatively connecting a user input device to the controller; and configure the controller to illuminate the light system to provide indirect lighting to a room in which the heater is located.
F21V 33/00 - Combinaisons structurales de dispositifs d'éclairage avec d'autres objets, non prévues ailleurs
F24C 7/06 - Disposition ou montage des éléments de chauffage électrique
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
H05B 33/08 - Circuits pour faire fonctionner des sources lumineuses électroluminescentes
F21V 23/00 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
G08B 17/10 - Déclenchement par la présence de fumée ou de gaz
G08B 17/117 - Déclenchement par la présence de fumée ou de gaz en utilisant un dispositif de détection pour des gaz spécifiques, p.ex. des produits de combustion, produits par l'incendie
F21V 23/04 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des interrupteurs
F21Y 101/02 - Structure miniature, p. ex. diodes électroluminescentes (LED)
F21W 121/00 - Utilisation ou application des dispositifs ou des systèmes d'éclairage à des fins décoratives, non prévues dans les groupes
F21Y 103/10 - Sources lumineuses de forme allongée, p.ex. tubes fluorescents comprenant un réseau linéaire d’éléments générateurs de lumière ponctuelle
A heater includes: a controller; a user input operatively connected to the controller; and a lighting system operatively connected to, and controlled by, the controller, the lighting system configured to illuminate outside the heater along a length of the heater. A method of displaying light includes: attaching a lighting system to a heater; operatively connecting the lighting system to a controller; operatively connecting a user input device to the controller; and configure the controller to illuminate the light system to provide indirect lighting to a room in which the heater is located.
F21V 33/00 - Combinaisons structurales de dispositifs d'éclairage avec d'autres objets, non prévues ailleurs
F21K 9/00 - Sources lumineuses utilisant des dispositifs à semi-conducteurs en tant qu’éléments générateurs de lumière, p.ex. utilisant des diodes électroluminescentes [LED] ou des lasers
F21S 10/02 - Dispositifs ou systèmes d'éclairage produisant un effet d'éclairage variable produisant des couleurs variables
F24D 19/00 - SYSTÈMES DE CHAUFFAGE DE LOCAUX DOMESTIQUES OU D'AUTRES LOCAUX, p.ex. SYSTÈMES DE CHAUFFAGE CENTRAL; SYSTÈMES D'ALIMENTATION EN EAU CHAUDE À USAGE DOMESTIQUE; LEURS ÉLÉMENTS OU PARTIES CONSTITUTIVES - Détails
G08B 7/00 - Systèmes de signalisation selon plus d'un des groupes ; Systèmes d'appel de personnes selon plus d'un des groupes
G08B 19/00 - Alarmes réagissant à plusieurs conditions différentes, indésirables ou anormales, p.ex. cambriolage et incendie, température anormale et débit d'écoulement anormal
H05B 1/02 - Dispositions de commutation automatique spécialement adaptées aux appareils de chauffage
The present disclosure relates to modules for heat exchange for use in cooling towers and methods of assembling cooling towers using such modules. The aforementioned modules for heat exchange may include fill packing and a structural system configured to provide support for at least the fill packing, in which the structural system includes a plurality of structural members configured to provide compression and tension support. The aforementioned modules for heat exchange may be assembled prior to being transported to a job site and installed in a cooling tower. A method for assembling a cooling tower using the aforementioned modules for heat exchange includes: constructing a cold water basin; assembling an air inlet structure on the cold water basin; and placing a heat exchange module on top of the air inlet structure.
A drift eliminator to remove liquid from a flow of air in a cooling tower includes an eliminator inlet, a plurality of flutes, an eliminator ridge, and a plurality of ribs. The eliminator inlet is to receive the flow of air. The plurality of flutes are configured to convey the flow of air through the drift eliminator. The eliminator ridge has a first drift wall extending in a first direction and a second drift wall extending in a second direction. Each flute is in fluid communication with the eliminator ridge and is defined by a flute interior surface curving upwards from the flute inlet to a flute outlet. The plurality of ribs are defined by adjacent ones of the flutes and curving upwards toward the flute outlet.
B01D 45/00 - Séparation de particules dispersées dans des gaz ou des vapeurs par gravité, inertie ou force centrifuge
F28C 1/04 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec courant croisé uniquement
B01D 45/06 - Séparation de particules dispersées dans des gaz ou des vapeurs par gravité, inertie ou force centrifuge par inertie par inversion du sens de l'écoulement
B01D 45/16 - Séparation de particules dispersées dans des gaz ou des vapeurs par gravité, inertie ou force centrifuge en utilisant la force centrifuge produite par le mouvement hélicoïdal du courant gazeux
F28F 25/08 - Planches ou grilles d'éclaboussement, p.ex. pour convertir la pulvérisation de liquides en films de liquides; Eléments ou couches pour accroître l'aire de la surface de contact
F28C 1/16 - Dispositions pour prévenir une condensation, une précipitation ou une formation de buée, à l'extérieur du refroidisseur
B01D 45/08 - Séparation de particules dispersées dans des gaz ou des vapeurs par gravité, inertie ou force centrifuge par inertie par projection contre les diaphragmes séparateurs
B01J 19/30 - Eléments de remplissage non agglomérés ou en forme, p.ex. anneaux de Raschig ou éléments de Berl en forme de selle, destinés à être versés dans l'appareil de transfert de chaleur ou de matière
B01D 50/00 - Combinaisons de procédés ou de dispositifs pour la séparation de particules de gaz ou de vapeurs
A47L 9/16 - Agencement ou disposition des cyclones ou autres dispositifs à action centrifuge
82.
AIR-TO-AIR HEAT EXCHANGER BYPASS FOR WET COOLING TOWER APPARATUS AND METHOD
A cooling tower having an evaporative media along with a liquid distribution system that distributes hot liquid over the evaporative media. The cooling tower includes a pair of heat exchanger modules that each have a first set of passageways in fluid communication with a first flow duct and a second set of passageways in fluid communication with a second flow duct. The heat exchanger module transfers heat from a first air stream into a second air stream. The cooling tower further includes a first bypass flow path that extends between the first heat exchanger module and the second heat exchanger module whereby a bypass door regulates airflow there through.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; software and apparatus for mapping the location of metallic objects and/or cables and/or pipes and/or drains; parts and fittings for all the aforesaid goods.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; parts and fittings for all of the aforesaid goods
85.
Modular counterflow fill hanging system apparatus and method
A heat exchange fill apparatus for use with a cooling tower that employs a support frame assembly. The heat exchange fill apparatus has a media fill pack that is comprised of fill pack media modules wherein a stake, prevents the modules from shifting with respect to one another. The modules are installed in a cooling tower of the like via a hanging fill support.
F28F 25/08 - Planches ou grilles d'éclaboussement, p.ex. pour convertir la pulvérisation de liquides en films de liquides; Eléments ou couches pour accroître l'aire de la surface de contact
B23P 15/26 - Fabrication d'objets déterminés par des opérations non couvertes par une seule autre sous-classe ou un groupe de la présente sous-classe d'échangeurs de chaleur
09 - Appareils et instruments scientifiques et électriques
Produits et services
Recorded content; Information technology and audiovisual equipment; Magnets, magnetizers and demagnetizers; Devices for treatment using electricity; Apparatus, instruments and cables for electricity; Optical devices, enhancers and correctors; Safety, security, protection and signalling devices; Diving equipment; Navigation, guidance, tracking, targeting and map making devices; Measuring, detecting and monitoring instruments, indicators and controllers, such as geophysical surveying apparatus and instruments, in particular for use in locating, tracing, identifying and fault finding in relation to underground cables, pipes and drains and electromagnetic field detectors; Scientific research and laboratory apparatus, educational apparatus and simulators; and parts and fittings of all the aforesaid goods, included in the class.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-find in relation to underground cables, pipes and drains; electromagnetic field detectors; and parts and fittings for all the aforesaid goods
(1) Heating boilers, hot water boilers, furnace boilers, hot water heaters, and hydronic heating systems, comprised of pumps, piping, fan coils, hot water baseboards, radiant floor heating rods and electronic controllers.
A fill support frame for an evaporative cooling tower includes a plurality of horizontal framing members, a plurality of columns, and a plurality of rails disposed on the horizontal framing members. The plurality of rails are configured to engage a plurality of slide members of a fill module.
F28F 25/08 - Planches ou grilles d'éclaboussement, p.ex. pour convertir la pulvérisation de liquides en films de liquides; Eléments ou couches pour accroître l'aire de la surface de contact
A cooling tower system and/or fluid cooler that provides desired cooling performance, without the use of pressurized or gravity based nozzle spray systems.
B01F 3/04 - Mélange, p.ex. dispersion, émulsion, selon les phases à mélanger de gaz ou de vapeurs avec des liquides
F28C 1/06 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération avec contre-courant et courant croisé
F28D 5/02 - Appareils échangeurs de chaleur comportant des ensembles de canalisations fixes pour une seule des sources de potentiel calorifique, les deux sources étant en contact chacune avec un côté de la paroi de la canalisation, utilisant l'effet réfrigérant dans lesquels la source de potentiel calorifique soumise à évaporation s'écoule sous forme de pellicule continue ou ruisselle librement sur les canalisations
F28F 25/02 - PARTIES CONSTITUTIVES OU AMÉNAGEMENTS, D'APPLICATION GÉNÉRALE, DES DISPOSITIFS ÉCHANGEURS DE CHALEUR OU DE TRANSFERT DE CHALEUR - Parties constitutives des réfrigérateurs à ruissellement pour répartir, faire circuler ou collecter le liquide
F28C 1/14 - Réfrigérants à ruissellement à contact direct, p.ex. tours de réfrigération comprenant également un échange de chaleur sans contact direct
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; and parts and fittings for all the aforesaid goods
09 - Appareils et instruments scientifiques et électriques
Produits et services
Geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; and parts and fittings for all the aforesaid goods
09 - Appareils et instruments scientifiques et électriques
Produits et services
Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for conducting, switching, transforming, accumulating, regulating or controlling electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; compact discs, DVDs and other digital recording media; mechanisms for coin-operated apparatus; cash registers, calculating machines, data processing equipment, computers; computer software; fire-extinguishing apparatus; geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; parts and fittings for all the aforesaid goods.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for conducting, switching, transforming, accumulating, regulating or controlling electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; compact discs, DVDs and other digital recording media; mechanisms for coin-operated apparatus; cash registers, calculating machines, data processing equipment, computers; computer software; fire-extinguishing apparatus; geophysical surveying apparatus and instruments, for use in locating, tracing, identifying and fault-finding in relation to underground cables, pipes and drains; electromagnetic field detectors; parts and fittings for all the aforesaid goods.
09 - Appareils et instruments scientifiques et électriques
Produits et services
Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for conducting, switching, transforming, accumulating, regulating or controlling electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; compact discs, DVDs and other digital recording media; mechanisms for coin-operated apparatus; cash registers, calculating machines, data processing equipment, computers; computer software; fire-extinguishing apparatus; software for ground penetrating radar units and antennae, and geophysical surveying apparatus and instruments; parts and fittings for all the aforesaid goods.
Machine parts of steam generating devices, air filters and machine tools and machine couplings and transmission components (except for land vehicles), such as machine parts of steam generating devices and air filters. Apparatus for lighting, heating, steam generating, cooking, refrigerating, drying, ventilating, water supply and sanitary purposes, such as cooling tower components and drift eliminators.