An HVAC system includes a blower, a variable-speed compressor, an indoor air temperature sensor that measures an indoor air temperature (IAT) of an enclosed space, and a controller. The controller stores an indoor temperature setpoint and a default discharge air temperature setpoint. The controller receives the IAT. The controller determines that the IAT is not within a threshold range of the indoor temperature setpoint. The controller then determines an adaptive discharge air temperature setpoint. The controller determines a compressor speed at which to operate the variable-speed compressor based on the adaptive discharge air temperature setpoint. The controller causes the variable-speed compressor to operate at the determined compressor speed.
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
2.
SOUND-BASED MOTOR DIAGNOSTICS FOR A CONDENSING UNIT
An analysis device is configured to operate a heating, ventilation, and air conditioning (HVAC) system and to receive an audio signal from a sound sensor, wherein the audio signal is associated with a condensing unit of the HVAC system. The device is configured to determine an audio signature from the audio signal and to determine whether a motor of the condensing unit is operating within a mode of operation based on the audio signature. The device is further configured to determine a fault type that is associated with the audio signature and to output a recommendation based on the determined fault type.
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to receive a temperature value and determine a load demand value based on the temperature value. The device is further configured to determine the load demand value is greater than the load capacity value for the HVAC system and, in response, identify a first setting from among a first plurality of settings for the HVAC system. By default, access to the first plurality of setting for the HVAC system is restricted for a user. The device is further configured to receive a response approving permission to operate the HVAC system using the first setting to the user and send a trigger signal to an HVAC controller to operate the one or more components of the HVAC system using the first setting.
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
F24F 11/46 - Improving electric energy efficiency or saving
F24F 11/61 - Control or safety arrangements characterised by user interfaces or communication using timers
In an embodiment, a blower for a heating, ventilation, and air conditioning system includes a blower wheel and a housing. The blower wheel includes backward-curved blades configured to rotate in a rotational plane. The housing forms an at least hexagonal cross-section around at least a portion of the rotational plane, where the blower wheel is positioned within the housing such that there exists a first distance and a second distance. The first distance is measured radially outward from a center of the blower wheel to a first side of the at least hexagonal cross-section. The second distance is measured radially outward from the center of the blower wheel to a second side of the at least hexagonal cross-section. The second distance forms a an acute angle with the first distance. The first distance and the second distance are unequal and less than a diameter of the blower wheel.
F24F 7/08 - Ventilation with ducting systems with forced air circulation, e.g. by fan with separate ducts for supplied and exhausted air
F24F 11/74 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity
In an embodiment, a blower for a heating, ventilation, and air conditioning system includes a blower wheel and a housing. The blower wheel includes backward-curved blades configured to rotate in a rotational plane. The housing forms an at least hexagonal cross-section around at least a portion of the rotational plane, where the blower wheel is positioned within the housing such that there exists a first distance and a second distance. The first distance is measured radially outward from a center of the blower wheel to a first side of the at least hexagonal cross-section. The second distance is measured radially outward from the center of the blower wheel to a second side of the at least hexagonal cross-section. The second distance forms a an acute angle with the first distance. The first distance and the second distance are unequal and less than a diameter of the blower wheel.
F24F 7/08 - Ventilation with ducting systems with forced air circulation, e.g. by fan with separate ducts for supplied and exhausted air
F24F 11/74 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity
A heating, ventilation, and air conditioning (HVAC) system includes a thermostat comprising a processor configured to determine instructions for providing a flow of conditioned air to a first zone of the HVAC system. The HVAC system includes a damper located in a duct associated with the first zone of the HVAC system. The damper includes a moveable plate configured to block the flow of conditioned air through the duct when the movable plate is in a closed position and allow the flow of conditioned air through the duct when the movable plate is in an at least partially open position. The damper includes a wireless receiver and transmitter configured to receive the instructions for providing the flow of conditioned air to the first zone. The damper includes an actuator configured to move the movable plate based at least in part on the received instructions, thereby adjusting the flow of conditioned air to the first zone.
An HVAC system includes a high-pressure subsystem and a low-pressure subsystem. After determining that refrigerant leak diagnostics should be performed, a controllable valve is closed between a condenser and compressor of the HVAC system. The compressor then operates until a predetermined input refrigerant pressure is reached. After the predetermined input refrigerant pressure is reached, operation of the compressor is stopped. After stopping operation of the compressor and waiting at least a predetermined wait time, the pressure in the low-pressure subsystem of the HVAC system is monitored. A rate of change of the pressure in the low-pressure subsystem is determined. If the rate of change is negative and a magnitude of the rate of change is greater than a threshold value, a leak location is determined to be in the low-pressure subsystem.
F24F 11/36 - Responding to malfunctions or emergencies to leakage of heat-exchange fluid
F24F 11/84 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling the supply of heat-exchange fluids to heat-exchangers using valves
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
An HVAC thermostat assembly has a wall-plate connector that includes a wall-plate and wire connectors as a whole that allows for a thinner, more aesthetic design. In one instance, the HVAC thermostat includes a display unit with a wall-plate connector recess having a plurality of electrical connector pins extending outward to mate with a wall-plate connector. The wall-plate connector includes a wall plate with incorporated electrical terminals. Other assemblies and systems are disclosed.
An apparatus includes a compressor, a first heat exchanger, a reheater, a first valve, a second heat exchanger, a four-way valve, a cap tube, and a blower. The compressor compresses a refrigerant. The blower moves air proximate the second heat exchanger to the reheater. During a cooling mode of operation, the four-way valve is configured to direct refrigerant from the first heat exchanger to the compressor; the compressor compresses the refrigerant received from the first heat exchanger; and the cap tube is configured to allow refrigerant to bypass the reheater.
F24F 3/06 - Air-conditioning systems in which conditioned primary air is supplied from one or more central stations to distributing units in the rooms or spaces where it may receive secondary treatment; Apparatus specially designed for such systems characterised by the arrangements for the supply of heat-exchange fluid for the subsequent treatment of primary air in the room units
F24F 11/84 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling the supply of heat-exchange fluids to heat-exchangers using valves
F25B 13/00 - Compression machines, plants or systems, with reversible cycle
F25B 41/20 - Disposition of valves, e.g. of on-off valves or flow control valves
A heating, ventilation, and air conditioning (HVAC) system includes a network of wireless remote climate sensors to develop a complete heat map of an enclosed space. The remote climate sensor is configured to collect temperature and humidity data on a zone of the enclosed space. The HVAC system uses a network of these sensors to obtain data points across the enclosed space. The resulting heat map is used by the HVAC system to determine where to direct air in the enclosed space. By comparing the temperature and humidity at a specific remote climate sensor with the user's desired temperature and humidity, the HVAC system can decide whether to increase or decrease the air flow through a variable damper that is located near the remote climate sensor. By conducting this analysis throughout the enclosed space and making incremental adjustments to the air flow in hot and cold spots in the enclosed space, the disclosed HVAC system provides even comfort to the user along with reduced energy consumption.
F24F 11/523 - Indication arrangements, e.g. displays for displaying temperature data
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
F24F 11/64 - Electronic processing using pre-stored data
F24F 11/67 - Switching between heating and cooling modes
F24F 11/74 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity
F24F 11/46 - Improving electric energy efficiency or saving
F24F 11/54 - Control or safety arrangements characterised by user interfaces or communication using one central controller connected to several sub-controllers
G05B 13/02 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric
A component authentication and validation system requests a token server to provide tokens for a product line. The system receives, from the token server, the requested tokens. The system associates each token with a unique identifier that uniquely identifies the token. The system receives, from a production line server, a request to transmit a particular number of tokens to program the components associated with the product line. The system receives, from the production line server, a report file comprising a programmed token that is programmed into a component associated with the product line. The programmed token is used to authenticate the component. The system registers the token with the token server, such that inquiries about the token are tracked by the token server.
A system for authenticating components using software security tokens receives, from a remote server, a security token that is a software security artifact that is used to uniquely identify a component. The system programs the security token into the component, where programming the security token into the component comprises encoding the component with the security token such that the security token in retrievable upon request for authenticating the component. The system generates a report file comprising the programmed security token. The programmed security token is used to authenticate the component. The system transmits the report file to the remote server.
H04L 9/32 - Arrangements for secret or secure communications; Network security protocols including means for verifying the identity or authority of a user of the system
An apparatus stores a security token in a memory associated with the apparatus. The security token is a software security artifact used to uniquely identify the apparatus. The apparatus receives a query message to provide the security token. The apparatus transmits the security token to be verified. In response to the security token being verified, the apparatus participates in a secured communication channel with a user device. The apparatus receives a second security token that is used for a subsequent authentication of the apparatus. The apparatus stores the second security token in the memory.
G06F 21/73 - Protecting specific internal or peripheral components, in which the protection of a component leads to protection of the entire computer to assure secure computing or processing of information by creating or determining hardware identification, e.g. serial numbers
An occupancy tracking device configured to identify devices connected to an access point over a predetermined time period. The device is further configured to populate entries in a device log for the identified devices. The device is further configured to determine a predicted occupancy level and to control a Heating, Ventilation, and Air Conditioning (HVAC) system based on the predicted occupancy level.
A system includes multiple HVAC systems. After receiving a demand request, a multiple-system controller a first anticipated power consumption associated with operating a first HVAC system at a first temperature setpoint during a future period of time of the demand response request and a second anticipated power consumption associated with operating a second HVAC system at a second temperature setpoint during the future period of time. Based at least in part on the first and the second anticipated power consumptions, a staging schedule is determined that indicates when to operate the first and second HVAC systems.
A method of preventing evaporator coil freeze in a heating, ventilation and air conditioning (HVAC) system is performed by a controller in the HVAC system. The method includes determining a reference saturated suction temperature (SST) via a sensor disposed in relation to an evaporator coil in the HVAC system. The method also includes determining whether the reference SST is below a minimum SST threshold. The method also includes, responsive to a determination that the reference SST is below the minimum SST threshold, increasing a discharge air temperature (DAT) setpoint.
F25B 47/00 - Arrangements for preventing or removing deposits or corrosion, not provided for in another subclass
F24F 3/14 - Air-conditioning systems in which conditioned primary air is supplied from one or more central stations to distributing units in the rooms or spaces where it may receive secondary treatment; Apparatus specially designed for such systems characterised by the treatment of the air otherwise than by heating and cooling by dehumidification
20.
TIME-BASED AND SOUND-BASED DIAGNOSTICS FOR A HEATING, VENTILATION, AND AIR CONDITIONING BURNER ASSEMBLY
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the amount of time to ignite a burner in a burner assembly has exceeded a time threshold value and that a flame was not detected by a flame sensor. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the flame, and to determine whether the audio signature for the flame is present within the first audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the flame is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
G08B 17/06 - Electric actuation of the alarm, e.g. using a thermally-operated switch
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
A heating, ventilating, and air conditioning (HVAC) system includes at least one indoor air quality monitor. The indoor air quality monitor is fomied with an arrangement of chambers¨intake chamber, low-flow chamber, and outlet chamber¨such that a particulate sensor on an interior and another air quality sensor are neither overwhelmed nor underwhelmed by air flow to the sensors. The indoor air quality monitor may be arranged for attaching to a surface in a conditioned space for sampling air therein or may include a bypass chamber that fluidly couples to an HVAC duct. Other systems and methods are presented.
An indoor air quality monitor for an HVAC system includes a monitor body formed with a plurality of chambers defined at least in part by chamber walls. A bypass chamber allows for a majority of airflow entering the monitor to pass through. An intake chamber coupled to the bypass chamber allows for a portion of air to be removed for sampling by a particulate sensor. Air from the particulate sensor is discharged to an outlet chamber that is fluidly coupled to a downstream portion of the bypass chamber. The fluid requirements of the particulate sensor are maintained without overwhelming or underwhelming the particulate sensor. Other systems and monitors are presented; some include separate TVOC sensors.
An HVAC system includes a variable-speed compressor which compresses refrigerant flowing through the HVAC system, a blower which provides a flow of air through the HVAC system at a controllable flow rate, and a controller communicatively coupled to the variable-speed compressor and the blower. The controller receives a demand request, which includes a command to operate the HVAC system at a predefined setpoint temperature. In response to receiving the demand request, a setpoint temperature associated with the HVAC system can be adjusted to the predefined setpoint temperature. A speed of the variable-speed compressor is decreased to a low-speed setting. Based on the decreased speed of the variable-speed compressor, an air-flow rate can be determined to provide by the blower. The controllable flow rate of the flow of air provided by the blower can be adjusted based on the determined air-flow rate.
A heating, ventilating, and air conditioning (HVAC) system includes at least one indoor air quality monitor. The indoor air quality monitor is formed with an arrangement of chambers—intake chamber, low-flow chamber, and outlet chamber—such that a particulate sensor on an interior and another air quality sensor are neither overwhelmed nor underwhelmed by air flow to the sensors. The indoor air quality monitor may be arranged for attaching to a surface in a conditioned space for sampling air therein or may include a bypass chamber that fluidly couples to an HVAC duct. Other systems and methods are presented.
F24F 11/74 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity
F24F 11/30 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring
25.
Indoor Air Quality Monitors for Commericial HVAC Systems
An indoor air quality monitor for an HVAC system includes a monitor body formed with a plurality of chambers defined at least in part by chamber walls. A bypass chamber allows for a majority of airflow entering the monitor to pass through. An intake chamber coupled to the bypass chamber allows for a portion of air to be removed for sampling by a particulate sensor. Air from the particulate sensor is discharged to an outlet chamber that is fluidly coupled to a downstream portion of the bypass chamber. The fluid requirements of the particulate sensor are maintained without overwhelming or underwhelming the particulate sensor. Other systems and monitors are presented; some include separate TVOC sensors.
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the speed of a combustion air inducer has exceeded a speed threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the combustion air inducer from an audio signature library, and to determine the audio signature for the combustion air inducer is present within the audio signal. The device is further configured to determine a fault type based on the determination that the audio signature for the combustion air inducer is present within the audio signal.
G01N 29/44 - Processing the detected response signal
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
G01N 29/14 - Investigating or analysing materials by the use of ultrasonic, sonic or infrasonic waves; Visualisation of the interior of objects by transmitting ultrasonic or sonic waves through the object using acoustic emission techniques
27.
METHOD AND SYSTEM FOR IDENTIFYING INDOOR AIR QUALITY (IAQ) MONITOR INSTALLATION LOCATION
A method of monitoring a heating, ventilation, and air conditioning (HVAC) system to detect installation location of at least one indoor air quality (IAQ) monitor. The method includes monitoring, by a controller, operation of the HVAC system, determining, by the controller, whether power exists at a duct terminal of the at least one IAQ monitor and responsive to a determination that the power exists at the duct terminal of the at least one IAQ monitor, configuring, the at least one IAQ monitor as being installed within a ductwork.
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
A method of monitoring a heating, ventilation, and air conditioning (HVAC) system to detect installation location of at least one indoor air quality (IAQ) monitor. The method includes monitoring, by a controller, operation of the HVAC system, detennining, by the controller, whether power exists at a duct terminal of the at least one IAQ monitor and responsive to a detennination that the power exists at the duct tenninal of the at least one IAQ monitor, configuring, the at least one IAQ monitor as being installed within a ductwork.
An HVAC system includes one or more air quality sensors, each configured to measure an air quality and a thermostat communicatively coupled to the one or more air quality sensors. The thermostat receives indoor air quality measurements from the one or more air quality sensors. An indoor air quality score is determined based at least in part on the received indoor air quality measurements. The thermostat determines, based at least in part on the indoor air quality score, a mitigation action, wherein the mitigation action comprises one or more actions selected from the group of: (i) a filtering action comprising filtering air provided to the space using an air purification subsystem, and (ii) a ventilation action comprising ventilating the space using a ventilation subsystem. The mitigation action is executed, or implemented, by adjusting one or more components of the HVAC system.
F24F 11/74 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity
An HVAC system includes one or more air quality sensors, each configured to measure an air quality and a thermostat communicatively coupled to the one or more air quality sensors. The thermostat receives indoor air quality measurements from the one or more air quality sensors. An indoor air quality score is determined based at least in part on the received indoor air quality measurements. The thermostat determines, based at least in part on the indoor air quality score, a mitigation action, wherein the mitigation action comprises one or more actions selected from the group of: (i) a filtering action comprising filtering air provided to the space using an air purification subsystem, and (ii) a ventilation action comprising ventilating the space using a ventilation subsystem. The mitigation action is executed, or implemented, by adjusting one or more components of the HVAC system.
F24F 11/65 - Electronic processing for selecting an operating mode
F24F 11/30 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring
F24F 11/70 - Control systems characterised by their outputs; Constructional details thereof
F24F 7/003 - Ventilation in combination with air cleaning
F24F 8/10 - Treatment, e.g. purification, of air supplied to human living or working spaces otherwise than by heating, cooling, humidifying or drying by separation, e.g. by filtering
An HVAC system includes a compressor, condenser, and evaporator. A sensor measures a value associated with the refrigerant in the condenser or the evaporator, and a controller is communicatively coupled to the compressor and the sensor. The controller determines, based on an operational history the compressor, that pre-requisite criteria are satisfied for entering a sensor validation mode. After determining the pre-requisite criteria are satisfied, an initial sensor measurement value is determined. Following determining the initial sensor measurement value, the compressor is operated according to a sensor-validation mode. Following operating the compressor according to the sensor-validation mode for at least a minimum time, a current sensor measurement value is determined. The controller determines whether validation criteria are satisfied for the current sensor value. In response to determining that the validation criteria are satisfied, the controller determines that the sensor is validated.
G05B 13/04 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric involving the use of models or simulators
F25B 41/45 - Arrangements for diverging or converging flows, e.g. branch lines or junctions for flow control on the upstream side of the diverging point, e.g. with spiral structure for generating turbulence
32.
PREDICTIVE TEMPERATURE SCHEDULING FOR A THERMOSTAT USING MACHINE LEARNING
A heating, ventilation, and air conditioning (HVAC) control device configured to receive a user input for controlling an HVAC system, to determine whether the user input indicates an energy saving occupancy setting, and to identify a first plurality of time entries that are associated with a confidence level for a predicted occupancy status that is less than a predetermined threshold value in the predicted occupancy schedule. The device is further configured to modify the predicted occupancy schedule by setting the first plurality of time entries to an away status when the user input indicates an aggressive energy saving occupancy setting. The device is further configured to modify the predicted occupancy schedule by setting the second plurality of time entries to a present status when the user input indicates a conservative energy saving occupancy setting. The device is further configured to output the modified predicted occupancy schedule.
F24F 11/46 - Improving electric energy efficiency or saving
F24F 11/64 - Electronic processing using pre-stored data
G05B 13/02 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric
G05B 13/04 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric involving the use of models or simulators
F24F 11/65 - Electronic processing for selecting an operating mode
An occupancy tracking device configured to receive a plurality of sound samples over a predetermined time period. The device is further configured to compute an audio signature for each sound sample. The device is further configured to populate entries in the voice data log for the sound samples, to identify one or more clusters based on an audio signature that is associated with the populated entries, and to determine a number of clusters that are identified. The device is further configured to determine a predicted occupancy level based on the number of clusters that are identified and to control a Heating, Ventilation, and Air Conditioning (HVAC) system based on the predicted occupancy level.
H04R 1/40 - Arrangements for obtaining desired frequency or directional characteristics for obtaining desired directional characteristic only by combining a number of identical transducers
G10L 25/51 - Speech or voice analysis techniques not restricted to a single one of groups specially adapted for particular use for comparison or discrimination
An HVAC system includes a blower, a motor drive, and a controller. A benchmark rate of the flow of air provided by the blower and a corresponding benchmark power output of the motor drive associated with operation of the blower at a test condition are received. The controller determines a first motor drive frequency at which the motor drive is operating. Based on the benchmark rate and a comparison of the first motor drive frequency to the predefined motor drive frequency, a first rate of the flow of air provided by the blower is determined. At a later time, a current power output of the motor drive is determined during operation of the blower at the test condition. Based on a comparison of the current benchmark power output to the benchmark power output, an updated benchmark rate of the flow of air provided by the blower is determined.
An air quality measuring device that includes a first chamber, a second chamber, a third chamber, and a fourth chamber. The first chamber includes a first inlet configured to receive a first airflow, a first outlet configured to receive a first portion of the first airflow, and a second outlet configured to receive a second portion of the first airflow. The second chamber includes a second inlet configured to receive the first portion of the first airflow and a first sensor disposed within the second chamber. The third chamber includes a third inlet configured to receive the second portion of the first airflow and a second sensor disposed within the third chamber. The fourth chamber includes a fourth inlet configured to receive the second portion of the first airflow and a third sensor disposed within the fourth chamber.
A heat exchanger includes a shell, a coiled tube, and a swirler. The shell has an inlet and an outlet and forms a cavity. A first of a liquid refrigerant and a vapor refrigerant enters the inlet of the shell. The coiled tube is positioned within the cavity and is connected to an inlet tube from outside the shell and an outlet tube to outside the shell. A second of the liquid refrigerant and the vapor refrigerant enters the inlet tube of the coiled tube. The swirler is arranged adjacent the inlet of the shell and is dimensioned to distribute the first of the liquid refrigerant and the vapor refrigerant across the coiled tube.
F28D 7/16 - Heat-exchange apparatus having stationary tubular conduit assemblies for both heat-exchange media, the media being in contact with different sides of a conduit wall the conduits being arranged in parallel spaced relation
F28F 1/24 - Tubular elements or assemblies thereof with means for increasing heat-transfer area, e.g. with fins, with projections, with recesses the means being only outside the tubular element and extending transversely
F28F 13/12 - Arrangements for modifying heat transfer, e.g. increasing, decreasing by affecting the pattern of flow of the heat-exchange media by creating turbulence, e.g. by stirring, by increasing the force of circulation
37.
MEASURING INDOOR AIR QUALITY FOR A HEATING, VENTILATION, AND AIR CONDITIONING SYSTEM
An air quality measuring device that includes a first chamber, a second chamber, a third chamber, and a fourth chamber. The first chamber includes a first inlet configured to receive a first airflow, a first outlet configured to receive a first portion of the first airflow, and a second outlet configured to receive a second portion of the first airflow. The second chamber includes a second inlet configured to receive the first portion of the first airflow and a first sensor disposed within the second chamber. The third chamber includes a third inlet configured to receive the second portion of the first airflow and a second sensor disposed within the third chamber. The fourth chamber includes a fourth inlet configured to receive the second portion of the first airflow and a third sensor disposed within the fourth chamber.
A heating, ventilation, and air conditioning (HVAC) control device is configured to record a plurality of actual occupancy statuses, to determine a plurality of corresponding predicted occupancy statuses, and to compare the plurality of predicted occupancy statuses to the plurality of actual occupancy statuses. The device is further configured to identify conflicting occupancy statuses based on the comparison. A conflicting occupancy status indicates a difference between an actual occupancy status and a corresponding predicted occupancy status. The device is further configured to identify timestamps corresponding with the conflicting occupancy statuses, to identify historical occupancy statuses corresponding with the identified timestamps, and to update the conflicting occupancy statuses in the predicted occupancy schedule with the historical occupancy statuses.
F24F 11/30 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring
F24F 11/64 - Electronic processing using pre-stored data
F24F 11/65 - Electronic processing for selecting an operating mode
G05B 13/04 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric involving the use of models or simulators
G05B 13/02 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric
39.
HVAC SYSTEM WITH IMPROVED OPERATION OF A VARIABLE SPEED COMPRESSOR DURING A PEAK DEMAND RESPONSE
An HVAC system includes a variable speed compressor. A controller determines that the HVAC system is requested to operate according to a demand response during a demand response time. A curtailment compressor speed is determined that achieves the reduced power consumption requested by the demand response. At a start of the demand response time, the controller begins operating the variable speed compressor at the curtailment speed. During the demand response time, the controller adjusts the speed of the variable speed compressor using dynamic control logic with an offset setpoint temperature used as the control setpoint value when an indoor air temperature of the space is less than the offset setpoint temperature and greater than the baseline setpoint temperature.
F24F 11/62 - Control or safety arrangements characterised by the type of control or by internal processing, e.g. using fuzzy logic, adaptive control or estimation of values
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
F25B 49/02 - Arrangement or mounting of control or safety devices for compression type machines, plants or systems
H02J 13/00 - Circuit arrangements for providing remote indication of network conditions, e.g. an instantaneous record of the open or closed condition of each circuitbreaker in the network; Circuit arrangements for providing remote control of switching means in a power distribution network, e.g. switching in and out of current consumers by using a pulse code signal carried by the network
40.
HVAC SYSTEM WITH IMPROVED OPERATION OF A VARIABLE SPEED COMPRESSOR DURING A PEAK DEMAND RESPONSE
An HVAC system includes a variable speed compressor. A controller determines that the HVAC system is requested to operate according to a demand response during a demand response time. A curtailment compressor speed is determined that achieves the reduced power consumption requested by the demand response. At a start of the demand response time, the controller begins operating the variable speed compressor at the curtailment speed. During the demand response time, the controller adjusts the speed of the variable speed compressor using dynamic control logic with an offset setpoint temperature used as the control setpoint value when an indoor air temperature of the space is less than the offset setpoint temperature and greater than the baseline setpoint temperature.
An HVAC system includes an evaporator. The evaporator includes a sensor configured to measure a property value (i.e., a saturated suction temperature or a saturated suction pressure) associated with saturated refrigerant flowing through the evaporator. The system includes a variable-speed compressor configured to receive the refrigerant and compress the received refrigerant. The system includes a controller communicatively coupled to the sensor and the variable-speed compressor. The controller monitors the property value measured by the sensor and detects a system fault, based on the monitored property value. In response to detecting the system fault, the controller operates the compressor in a freeze-prevention mode, which is configured to maintain the property value above a setpoint value by adjusting a speed of the variable-speed compressor.
F24F 11/43 - Defrosting; Preventing freezing of indoor units
F24F 11/64 - Electronic processing using pre-stored data
F24F 11/65 - Electronic processing for selecting an operating mode
G05B 13/02 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric
F25B 49/02 - Arrangement or mounting of control or safety devices for compression type machines, plants or systems
42.
CONTROLLING SYSTEMS WITH MOTOR DRIVES USING PULSE WIDTH MODULATION
A system includes an electronic power converter and a controller. The electronic power converter supplies power to one or more motor drives of an HVAC system. The controller obtains a plurality of pulse width modulation (PWM) algorithms. Each PWM algorithm has an associated spectrum of frequencies. The controller further determines one or more resonance frequencies associated with the HVAC system. The controller also selects a first PWM algorithm from the plurality of PWM algorithms wherein the spectrum of frequencies of the first PWM algorithm lacks frequency peaks that overlap with the one or more resonance frequencies associated with the HVAC system. The controller further operates the electronic power converter according to the first PWM algorithm.
F25B 49/02 - Arrangement or mounting of control or safety devices for compression type machines, plants or systems
H02P 27/08 - Arrangements or methods for the control of AC motors characterised by the kind of supply voltage using variable-frequency supply voltage, e.g. inverter or converter supply voltage using dc to ac converters or inverters with pulse width modulation
H02M 5/458 - Conversion of ac power input into ac power output, e.g. for change of voltage, for change of frequency, for change of number of phases with intermediate conversion into dc by static converters using discharge tubes or semiconductor devices to convert the intermediate dc into ac using devices of a triode or transistor type requiring continuous application of a control signal using semiconductor devices only
43.
HVAC SYSTEM WITH IMPROVED OPERATION OF A SINGLE-STAGE COMPRESSOR DURING A PEAK DEMAND RESPONSE
An HVAC system is configured to regulate a temperature of a space. The HVAC system includes a single-stage compressor configured to compress a refrigerant used to cool air provided to the space and a controller communicatively coupled to the single-stage compressor. The controller determines that a demand response time period is starting at a start time. After determining that the demand response time period is starting at the start time, an operation schedule is determined indicating alternating portions of the demand response period during which the single-stage compressor is to be turned off and turned on. At or after the start time of the demand response time period, the controller begins operating the single-stage compressor according to the determined operation schedule.
An HVAC system is configured to regulate a temperature of a space. The HVAC system includes a single-stage compressor configured to compress a refrigerant used to cool air provided to the space and a controller communicatively coupled to the single-stage compressor. The controller determines that a demand response time period is starting at a start time. After determining that the demand response time period is starting at the start time, an operation schedule is determined indicating alternating portions of the demand response period during which the single- stage compressor is to be turned off and turned on. At or after the start time of the demand response time period, the controller begins operating the single-stage compressor according to the determined operation schedule.
F24F 11/62 - Control or safety arrangements characterised by the type of control or by internal processing, e.g. using fuzzy logic, adaptive control or estimation of values
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
F25B 49/02 - Arrangement or mounting of control or safety devices for compression type machines, plants or systems
H02J 13/00 - Circuit arrangements for providing remote indication of network conditions, e.g. an instantaneous record of the open or closed condition of each circuitbreaker in the network; Circuit arrangements for providing remote control of switching means in a power distribution network, e.g. switching in and out of current consumers by using a pulse code signal carried by the network
45.
Component tracking in automated manufacturing using digital fingerprints
A system is configured to receive an indication that an apparatus in a first assembled state should comprise a component with a first digital fingerprint and a component with a second digital fingerprint. The system is configured to receive video footage of apparatuses in the first assembled state. The system is configured to isolate an image of an apparatus in the first assembled state. The system is configured to split the image into a frame comprising a first component and a frame comprising a second component. The system is configured to identify feature points and to determine that the first set of feature points matches the first digital fingerprint and that the second set of feature points matches the second digital fingerprint. The system is configured to update a component database.
A system includes a device and a payload warehouse. The device receives a user request to initiate a feature of the device. In response to receiving the request, device information is provided to a payload warehouse. The payload warehouse stores an inventory which includes a digital payload. The digital payload includes data, such as a digital certificate, which may be used by the device to implement the user-requested feature. The payload warehouse receives the device information provided by the device and determines an encryption vector based at least in part on the received device information. Using the encryption vector, the digital payload is encrypted. The encrypted digital payload is provided to the device.
H04L 9/32 - Arrangements for secret or secure communications; Network security protocols including means for verifying the identity or authority of a user of the system
H04L 9/06 - Arrangements for secret or secure communications; Network security protocols the encryption apparatus using shift registers or memories for blockwise coding, e.g. D.E.S. systems
47.
DYNAMIC TEMPERATURE CONTROL FOR HEATING, VENTILATION, AND AIR CONDITIONING SYSTEM
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to receive a temperature value and determine a load demand value based on the temperature value. The device is further configured to determine the load demand value is greater than the load capacity value for the HVAC system and, in response, identify a first setting from among a first plurality of settings for the HVAC system. By default, access to the first plurality of setting for the HVAC system is restricted for a user. The device is further configured to receive a response approving permission to operate the HVAC system using the first setting to the user and send a trigger signal to an HVAC controller to operate the one or more components of the HVAC system using the first setting.
F24F 11/65 - Electronic processing for selecting an operating mode
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
F24D 19/10 - Arrangement or mounting of control or safety devices
48.
TIME-BASED AND SOUND-BASED DIAGNOSTICS FOR RESTRICTIONS WITHIN A HEATING, VENTILATION, AND AIR CONDITIONING SYSTEM
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to receive an audio signal from a microphone while operating the HVAC system and to determine that an audio signature for a combustion air inducer is not present within the audio signal. The device is further configured to determine whether an audio signature for an integrated furnace controller is present within the audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the integrated furnace controller is present within the audio signal, to identify a component identifier for a component of the HVAC system associated with fault type, and to output a recommendation identifying the component identifier.
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to receive a temperature value and determine a load demand value based on the temperature value. The device is further configured to determine the load demand value is greater than the load capacity value for the HVAC system and, in response, identify a first setting from among a first plurality of settings for the HVAC system. By default, access to the first plurality of setting for the HVAC system is restricted for a user. The device is further configured to receive a response approving permission to operate the HVAC system using the first setting to the user and send a trigger signal to an HVAC controller to operate the one or more components of the HVAC system using the first setting.
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
F24F 11/46 - Improving electric energy efficiency or saving
F24F 11/61 - Control or safety arrangements characterised by user interfaces or communication using timers
A system that includes a plurality of controllers that are each controller is configured to operate at least a portion of includes a Heating, Ventilation, and Air Conditioning (HVAC) system. The system further includes a gateway controller that is configured to determine a mesh network size for a local mesh network, to broadcast the mesh network size to other gateway controllers within a local area network, and to receive mesh network size information from the other gateway controllers. The gateway controller is further configured to compute an average mesh network size for the local area network and to determine that the mesh network size for the local mesh network is less than the average mesh network size for the local area network. The gateway controller is further configured to add one or more controllers to the local mesh network.
A system includes multiple HVAC systems. After receiving a demand request, a multiple-system controller determines a first anticipated power consumption associated with operating a first HVAC system at a first temperature setpoint during a future period of time of the demand response request and a second anticipated power consumption associated with operating a second HVAC system at a second temperature setpoint during the future period of time. Based at least in part on the first and the second anticipated power consumptions, a staging schedule is determined that indicates when to operate the first and second HVAC systems.
A system includes multiple HVAC systems. After receiving a demand request, a multiple-system controller a first anticipated power consumption associated with operating a first HVAC system at a first temperature setpoint during a future period of time of the demand response request and a second anticipated power consumption associated with operating a second HVAC system at a second temperature setpoint during the future period of time. Based at least in part on the first and the second anticipated power consumptions, a staging schedule is determined that indicates when to operate the first and second HVAC systems.
A method of calibrating a motor assembly includes selecting an electric motor and a motor controller for the motor assembly, obtaining at least one electric motor parameter of the electric motor, calculating a correction factor for the electric motor based upon the at least one electric motor parameter, and programming the motor controller with the correction factor.
H02K 11/20 - Structural association of dynamo-electric machines with electric components or with devices for shielding, monitoring or protection for measuring, monitoring, testing, protecting or switching
F24F 11/77 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity by controlling the speed of ventilators
H02K 11/33 - Drive circuits, e.g. power electronics
H02P 6/06 - Arrangements for speed regulation of a single motor wherein the motor speed is measured and compared with a given physical value so as to adjust the motor speed
H02P 6/08 - Arrangements for controlling the speed or torque of a single motor
54.
Method and system for the heat-pump control to reduce liquid refrigerant migration
A method of mitigating liquid-refrigerant migration includes comparing a requested compressor speed of a variable-speed compressor to a pre-defined threshold and, responsive to a determination that the requested compressor speed is greater than the pre-defined threshold, operating the variable-speed compressor at a first compressor speed that is less than the requested compressor speed.
An HVAC system includes a high-pressure subsystem and a low-pressure subsystem. After determining that refrigerant leak diagnostics should be performed, a controllable valve is closed between a condenser and compressor of the HVAC system. The compressor then operates until a predetermined input refrigerant pressure is reached. After the predetermined input refrigerant pressure is reached, operation of the compressor is stopped. After stopping operation of the compressor and waiting at least a predetermined wait time, the pressure in the low-pressure subsystem of the HVAC system is monitored. A rate of change of the pressure in the low-pressure subsystem is determined. If the rate of change is negative and a magnitude of the rate of change is greater than a threshold value, a leak location is determined to be in the low-pressure subsystem.
F24F 11/36 - Responding to malfunctions or emergencies to leakage of heat-exchange fluid
F24F 11/84 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling the supply of heat-exchange fluids to heat-exchangers using valves
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
A system is configured to receive video footage of evaporator coil slabs after they exit an automated coil brazer. The system is further configured to convert the video footage to greyscale and isolate frames from the greyscale video footage. Each frame comprises an image of a different evaporator coil slab. The system is further configured to generate a first digital fingerprint comprising a binary feature vector for each point in a first subset of feature points from the first frame, and generate a second digital fingerprint comprising a binary feature vector for each point in a second subset of feature points from the second frame.
A blower of an HVAC system includes an air inlet, an air outlet, a blower wheel with blades, a motor operable to cause the blower wheel to rotate, and a blower housing within which the blower wheel is positioned. The blower housing includes a top panel, a bottom panel, and a connecting panel. The top panel and the bottom panel are connected to the connecting panel. The top panel includes a curved edge extending from a bottom edge of the connecting panel to a top edge of the connecting panel. An expansion angle of the curved edge of the top panel changes as a function of position along the curved edge of the top panel. The bottom panel may have a shape corresponding to a mirror image to that of the top panel.
A blower of an HVAC system includes an air inlet, an air outlet, a blower wheel with blades, a motor operable to cause the blower wheel to rotate, and a blower housing within which the blower wheel is positioned. The blower housing includes a top panel, a bottom panel, and a connecting panel. The top panel and the bottom panel are connected to the connecting panel. The top panel includes a curved edge extending from a bottom edge of the connecting panel to a top edge of the connecting panel. An expansion angle of the curved edge of the top panel changes as a function of position along the curved edge of the top panel. The bottom panel may have a shape corresponding to a mirror image to that of the top panel.
F24F 1/0284 - Self-contained room units for air-conditioning, i.e. with all apparatus for treatment installed in a common casing characterised by air supply means, e.g. fan casings, internal dampers or ducts with horizontally arranged fan axis
F04D 1/00 - Radial-flow pumps, e.g. centrifugal pumps; Helico-centrifugal pumps
F04D 17/16 - Centrifugal pumps for displacing without appreciable compression
A system includes a device and a payload warehouse. The device receives a user request to initiate a feature of the device. In response to receiving the request, device information is provided to a payload warehouse. The payload warehouse stores an inventory which includes a digital payload. The digital payload includes data, such as a digital certificate, which may be used by the device to implement the user-requested feature. The payload warehouse receives the device information provided by the device and determines an encryption vector based at least in part on the received device information. Using the encryption vector, the digital payload is encrypted. The encrypted digital payload is provided to the device.
H04L 9/32 - Arrangements for secret or secure communications; Network security protocols including means for verifying the identity or authority of a user of the system
H04L 29/06 - Communication control; Communication processing characterised by a protocol
H04L 9/00 - Arrangements for secret or secure communications; Network security protocols
A method of defrost operation optimization in a heat pump includes launching a heating mode after completion of a performed defrost operation, measuring, after launching the heating mode, a heat transfer capability, determining if the measured heat transfer capability is less than or equal to a predetermined heat transfer capability limit for a non-iced condition, and reinforcing a next defrost operation if the measured heat transfer capability is greater than the predetermined gap limit.
A method of defrost operation optimization in a heat pump includes launching a heating mode after completion of a performed defrost operation, measuring, after launching the heating mode, a heat transfer capability, determining if the measured heat transfer capability is less than or equal to a predetermined heat transfer capability limit for a non-iced condition, and reinforcing a next defrost operation if the measured heat transfer capability is greater than the predetermined gap limit.
In an embodiment, a method of preventing evaporator coil freeze in a heating, ventilation and air conditioning (HVAC) system includes determining a reference saturated suction temperate (SST) via a sensor disposed in relation to an evaporator coil in the HVAC system, where the HVAC system is operating in reheat dehumidification mode. The method also includes determining whether the reference SST is below a minimum SST threshold. The method also includes, responsive to a determination that the reference SST is below the minimum SST threshold, determining a decreased compressor speed. The method also includes modulating a variable-speed compressor in the HVAC system in correspondence to the decreased compressor speed.
F24F 3/14 - Air-conditioning systems in which conditioned primary air is supplied from one or more central stations to distributing units in the rooms or spaces where it may receive secondary treatment; Apparatus specially designed for such systems characterised by the treatment of the air otherwise than by heating and cooling by dehumidification
F24F 3/153 - Air-conditioning systems in which conditioned primary air is supplied from one or more central stations to distributing units in the rooms or spaces where it may receive secondary treatment; Apparatus specially designed for such systems characterised by the treatment of the air otherwise than by heating and cooling by dehumidification with subsequent heating, i.e. with the air, given the required humidity in the central station, passing a heating element to achieve the required temperature
F25B 47/00 - Arrangements for preventing or removing deposits or corrosion, not provided for in another subclass
G05B 15/02 - Systems controlled by a computer electric
In an embodiment, a tensioning apparatus includes a housing and a fastener extending at least partially through the housing. The apparatus also includes a trolley adjustably positioned within the housing about the fastener. The apparatus also includes a pulley disposed outside the housing and coupled to the trolley, where the pulley moves in unison with the trolley along an opening in the housing.
An occupancy tracking device configured to identify devices connected to an access point over a predetermined time period. The device is further configured to populate entries in a device log for the identified devices. The device is further configured to determine a predicted occupancy level and to control a Heating, Ventilation, and Air Conditioning (HVAC) system based on the predicted occupancy level.
An HVAC system includes a variable-speed compressor which compresses refrigerant flowing through the HVAC system, a blower which provides a flow of air through the HVAC system at a controllable flow rate, and a controller communicatively coupled to the variable-speed compressor and the blower. The controller receives a demand request which includes a command to reduce power consumption by the HVAC system. In response to receiving the demand request, a speed of the variable-speed compressor is decreased and the controllable flow rate of the flow of air provided by the blower is adjusted.
F24F 1/46 - Component arrangements in separate outdoor units
F24F 11/50 - Control or safety arrangements characterised by user interfaces or communication
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
F24F 11/76 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity by means responsive to temperature, e.g. bimetal springs
F24F 11/46 - Improving electric energy efficiency or saving
67.
HVAC systems with evaporator bypass and supply air recirculation and methods of using same
An HVAC system includes an evaporator coil disposed between a return air duct and a supply air duct. The system includes a compressor fluidically connected to the evaporator coil, and a blower for providing a flow of air through the HVAC system. A controller determines an operating mode of the HVAC system.
F24F 11/81 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling the air supply to heat-exchangers or bypass channels
F24F 3/14 - Air-conditioning systems in which conditioned primary air is supplied from one or more central stations to distributing units in the rooms or spaces where it may receive secondary treatment; Apparatus specially designed for such systems characterised by the treatment of the air otherwise than by heating and cooling by dehumidification
F24F 11/65 - Electronic processing for selecting an operating mode
F24F 3/048 - Systems in which all treatment is given in the central station, i.e. all-air systems with temperature control at constant rate of air-flow
A metering device may automatically control fluid flow through a valve. A control system may alter the automatic control of a metering device. In some implementations, a predetermined event may occur to alter the automatic control of the metering device.
An HVAC system includes a blower, a motor drive, and a controller. A benchmark rate of the flow of air provided by the blower and a corresponding benchmark power output of the motor drive associated with operation of the blower at a test condition are received. The controller determines a first motor drive frequency at which the motor drive is operating. Based on the benchmark rate and a comparison of the first motor drive frequency to the predefined motor drive frequency, a first rate of the flow of air provided by the blower is determined. At a later time, a current power output of the motor drive is determined during operation of the blower at the test condition. Based on a comparison of the current benchmark power output to the benchmark power output, an updated benchmark rate of the flow of air provided by the blower is determined.
(1) HVAC equipment including but not limited to gas furnaces, oil furnaces, air conditioners, heat pumps, packaged units, air handlers, coils and ductless systems.
(1) HVAC equipment including but not limited to gas furnaces, oil furnaces, air conditioners, heat pumps, packaged units, air handlers, coils and ductless systems.
An HVAC system includes a compressor, condenser, and evaporator. A sensor measures a value associated with the refrigerant in the condenser or the evaporator, and a controller is communicatively coupled to the compressor and the sensor. The controller determines, based on an operational history the compressor, that pre-requisite criteria are satisfied for entering a sensor validation mode. After determining the pre-requisite criteria are satisfied, an initial sensor measurement value is determined. Following determining the initial sensor measurement value, the compressor is operated according to a sensor-validation mode. Following operating the compressor according to the sensor-validation mode for at least a minimum time, a current sensor measurement value is determined. The controller determines whether validation criteria are satisfied for the current sensor value. In response to determining that the validation criteria are satisfied, the controller determines that the sensor is validated.
G05B 13/04 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric involving the use of models or simulators
F25B 41/45 - Arrangements for diverging or converging flows, e.g. branch lines or junctions for flow control on the upstream side of the diverging point, e.g. with spiral structure for generating turbulence
74.
Method of calibrating a variable-speed blower motor
A method of calibrating a motor assembly includes selecting an electric motor and a motor controller for the motor assembly, obtaining at least one electric motor parameter of the electric motor, determining a correction factor for the electric motor based upon the at least one electric motor parameter, and programming the motor controller with the correction factor.
H02K 11/20 - Structural association of dynamo-electric machines with electric components or with devices for shielding, monitoring or protection for measuring, monitoring, testing, protecting or switching
F24F 11/77 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity by controlling the speed of ventilators
H02K 11/33 - Drive circuits, e.g. power electronics
G06K 19/077 - Constructional details, e.g. mounting of circuits in the carrier
H02P 6/06 - Arrangements for speed regulation of a single motor wherein the motor speed is measured and compared with a given physical value so as to adjust the motor speed
H02P 6/08 - Arrangements for controlling the speed or torque of a single motor
75.
Proactive system control using humidity prediction
During an initial period of time, an HVAC controller stores a record of an energy demand of the HVAC system that corresponds to an amount of energy used to operate the HVAC system. For a future time period, an anticipated energy demand of the HVAC system is determined. The controller then recursively determines, for each of a plurality of time points within the future time period, an anticipated indoor humidity value using the anticipated energy demand and the record of the energy demand. The HVAC system is operated based at least in part on the anticipated indoor humidity value.
F24F 11/65 - Electronic processing for selecting an operating mode
F24F 11/46 - Improving electric energy efficiency or saving
F24F 11/77 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure for controlling air flow rate or air velocity by controlling the speed of ventilators
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
A system comprises a primary unit and a plurality of secondary units each having a unique unit number. The primary unit is configured to communicate a command to each secondary unit with instructions to reply during a time window. The primary unit is also configured to receive a reply communication indicating the secondary unit's unique unit number from at least one of the secondary units, and determine an address to assign to the replying secondary unit based at least in part on the received unique unit number.
F24F 11/54 - Control or safety arrangements characterised by user interfaces or communication using one central controller connected to several sub-controllers
H04L 61/5038 - Address allocation for local use, e.g. in LAN or USB networks, or in a controller area network [CAN]
F24F 11/30 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring
F24F 140/00 - Control inputs relating to system states
H04L 67/12 - Protocols specially adapted for proprietary or special-purpose networking environments, e.g. medical networks, sensor networks, networks in vehicles or remote metering networks
An HVAC system includes an evaporator. The evaporator includes a sensor configured to measure a property value (i.e., a saturated suction temperature or a saturated suction pressure) associated with saturated refrigerant flowing through the evaporator. The system includes a variable-speed compressor configured to receive the refrigerant and compress the received refrigerant. The system includes a controller communicatively coupled to the sensor and the variable-speed compressor. The controller monitors the property value measured by the sensor and detects a system fault, based on the monitored property value. In response to detecting the system fault, the controller operates the compressor in a freeze-prevention mode, which is configured to maintain the property value above a setpoint value by adjusting a speed of the variable-speed compressor. This prevents or delays freezing of the evaporator during operation of the system during the detected system fault.
F24F 11/64 - Electronic processing using pre-stored data
F24F 11/65 - Electronic processing for selecting an operating mode
F24F 11/43 - Defrosting; Preventing freezing of indoor units
G05B 13/02 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric
F25B 49/02 - Arrangement or mounting of control or safety devices for compression type machines, plants or systems
F24F 140/30 - Condensation of water from cooled air
F24F 13/22 - Means for preventing condensation or evacuating condensate
78.
HVAC system operated with adaptive discharge air temperature setpoint
An HVAC system includes a blower, a variable-speed compressor, an indoor air temperature sensor that measures an indoor air temperature (IAT) of an enclosed space, and a controller. The controller stores an indoor temperature setpoint and a default discharge air temperature setpoint. The controller receives the IAT. The controller determines that the IAT is not within a threshold range of the indoor temperature setpoint. The controller then determines an adaptive discharge air temperature setpoint. The controller determines a compressor speed at which to operate the variable-speed compressor based on the adaptive discharge air temperature setpoint. The controller causes the variable-speed compressor to operate at the determined compressor speed.
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
In an embodiment, a tensioning apparatus includes a housing and a fastener extending at least partially through the housing. The apparatus also includes a trolley adjustably positioned within the housing about the fastener. The apparatus also includes a pulley disposed outside the housing and coupled to the trolley, where the pulley moves in unison with the trolley along an opening in the housing.
In one instance, a heat sink for thermal management of an electronic component includes a top plate and a base plate that is displaced from the top plate when in an assembled position. The base plate has a first side and a second side, and the second side is for thermally coupling to the electronic component. The heat sink also includes a plurality of fins each including a flat member formed with a plurality of pin apertures and a plurality of fastener apertures. A plurality of pins is disposed through the plurality of pin apertures. The members of the plurality of fins are spaced from one another. The top plate is coupled to a first end of the plurality of pins, and the base plate is coupled to a second end of the plurality of pins to form a secure structure. Other heat sinks are presented.
B23P 15/26 - Making specific metal objects by operations not covered by a single other subclass or a group in this subclass heat exchangers
F28D 21/00 - Heat-exchange apparatus not covered by any of the groups
F28F 1/32 - Tubular elements or assemblies thereof with means for increasing heat-transfer area, e.g. with fins, with projections, with recesses the means being only outside the tubular element and extending transversely the means having portions engaging further tubular elements
An HVAC system includes a high-pressure subsystem and a low-pressure subsystem. After determining that refrigerant leak diagnostics should be performed, a controllable valve is closed between a condenser and compressor of the HVAC system. The compressor then operates until a predetermined input refrigerant pressure is reached. After the predetermined input refrigerant pressure is reached, operation of the compressor is stopped. After stopping operation of the compressor and waiting at least a predetermined wait time, the pressure in the low-pressure subsystem of the HVAC system is monitored. A rate of change of the pressure in the low-pressure subsystem is determined. If the rate of change is negative and a magnitude of the rate of change is greater than a threshold value, a leak location is determined to be in the low-pressure subsystem.
F24F 11/36 - Responding to malfunctions or emergencies to leakage of heat-exchange fluid
F24F 11/84 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling the supply of heat-exchange fluids to heat-exchangers using valves
F24F 11/86 - Control systems characterised by their outputs; Constructional details thereof for controlling the temperature of the supplied air by controlling compressors within refrigeration or heat pump circuits
An HVAC system includes a high-pressure subsystem and a low-pressure subsystem. After determining that refrigerant leak diagnostics should be performed, a controllable valve is closed between a condenser and compressor of the HVAC system. The compressor then operates until a predetermined input refrigerant pressure is reached. After the predetermined input refrigerant pressure is reached, operation of the compressor is stopped. After stopping operation of the compressor and waiting at least a predetermined wait time, the pressure in the low-pressure subsystem of the HVAC system is monitored. A rate of change of the pressure in the low-pressure subsystem is determined. If the rate of change is negative and a magnitude of the rate of change is greater than a threshold value, a leak location is determined to be in the low- pressure subsystem.
A HVAC system having an indoor heat exchanger having a first refrigerant passage extending in a first direction and a second refrigerant extending in a second direction opposite from the first direction, a first refrigerant circuit comprising a first compressor, a first expansion valve, a first outdoor heat exchanger, the first refrigerant passage, and a first reversing valve operable to control a direction of first refrigerant in the first refrigerant circuit, and a second refrigerant circuit comprising a second compressor, a second expansion valve, a second outdoor heat exchanger, the second refrigerant passage, and a second reversing valve operable to control a direction of second refrigerant in the second refrigerant circuit.
09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
Goods & Services
Thermostats, electronic controllers for controlling conditioners, furnaces, heat pumps, heat recovery units Commercial air conditioners, furnaces, heat pumps, heat recovery units and components thereof
09 - Scientific and electric apparatus and instruments
11 - Environmental control apparatus
Goods & Services
Thermostats, electronic controllers for controlling conditioners, furnaces, heat pumps, heat recovery units Commercial air conditioners, furnaces, heat pumps, heat recovery units and components thereof
87.
COUNTER-CURRENT FLOW IN BOTH AC AND HP MODES FOR PART LOAD OPTIMIZATION
A HVAC system having an indoor heat exchanger having a first refrigerant passage extending in a first direction and a second refrigerant extending in a second direction opposite from the first direction, a first refrigerant circuit comprising a first compressor, a first expansion valve, a first outdoor heat exchanger, the first refrigerant passage, and a first reversing valve operable to control a direction of first refrigerant in the first refrigerant circuit, and a second refrigerant circuit comprising a second compressor, a second expansion valve, a second outdoor heat exchanger, the second refrigerant passage, and a second reversing valve operable to control a direction of second refrigerant in the second refrigerant circuit.
F24F 1/0003 - Room units for air-conditioning, e.g. separate or self-contained units or units receiving primary air from a central station characterised by a split arrangement, wherein parts of the air-conditioning system, e.g. evaporator and condenser, are in separately located units
F25B 5/02 - Compression machines, plants or systems, with several evaporator circuits, e.g. for varying refrigerating capacity arranged in parallel
F25B 29/00 - Combined heating and refrigeration systems, e.g. operating alternately or simultaneously
A blower for an HVAC system, the blower includes a housing with an intake and an outlet, a fan or blower wheel disposed within the housing and configured to draw air into the housing via the intake and to exhaust air from the housing through the outlet, and an adjustable cutoff plate configured to be moved between at least a first position defining a first cutoff angle and a second position defining a second cutoff angle.
F24F 11/72 - Control systems characterised by their outputs; Constructional details thereof for controlling the supply of treated air, e.g. its pressure
F04D 15/00 - Control, e.g. regulation, of pumps, pumping installations, or systems
F24F 11/46 - Improving electric energy efficiency or saving
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the amount of time to ignite a burner in a burner assembly has exceeded a time threshold value and that a flame was not detected by a flame sensor. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the flame, and to determine whether the audio signature for the flame is present within the first audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the flame is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
G08B 17/06 - Electric actuation of the alarm, e.g. using a thermally-operated switch
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
90.
Sound-based diagnostics for a combustion air inducer
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the speed of a combustion air inducer exceeds a speed threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system and to determine an audio signature for the combustion air inducer is not present within the audio signal. The device is further configured to determine whether an audio signature for the integrated furnace controller is present within the audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the integrated furnace controller is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
G05B 13/02 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric
G10L 25/51 - Speech or voice analysis techniques not restricted to a single one of groups specially adapted for particular use for comparison or discrimination
F27D 21/00 - Arrangement of monitoring devices; Arrangements of safety devices
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the amount of time to close a pressure switch exceeds a time threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system and to determine that an audio signature for a combustion air inducer is not present within the audio signal. The device is further configured to determine whether an audio signature for an integrated furnace controller is present within the audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the integrated furnace controller is present within the audio signal, to identify a component identifier for a component of the HVAC system associated with fault type, and to output a recommendation identifying the component identifier.
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the speed of a combustion air inducer has exceeded a speed threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the combustion air inducer from an audio signature library, and to determine the audio signature for the combustion air inducer is present within the audio signal. The device is further configured to determine a fault type based on the determination that the audio signature for the combustion air inducer is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
G01N 29/44 - Processing the detected response signal
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
G01N 29/14 - Investigating or analysing materials by the use of ultrasonic, sonic or infrasonic waves; Visualisation of the interior of objects by transmitting ultrasonic or sonic waves through the object using acoustic emission techniques
93.
Time-based and sound-based prognostics for restrictions within a heating, ventilation, and air conditioning system
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the amount of time to close a pressure switch exceeds a time threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the combustion air inducer, and to determine the audio signature for the combustion air inducer is present within the audio signal. The device is further configured to determine a fault type based on the determination that the audio signature for the combustion air inducer is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
F24F 11/64 - Electronic processing using pre-stored data
G05B 13/02 - Adaptive control systems, i.e. systems automatically adjusting themselves to have a performance which is optimum according to some preassigned criterion electric
G10L 25/51 - Speech or voice analysis techniques not restricted to a single one of groups specially adapted for particular use for comparison or discrimination
F27D 21/00 - Arrangement of monitoring devices; Arrangements of safety devices
94.
SOUND-BASED DIAGNOSTICS FOR A COMBUSTION AIR INDUCER
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the speed of a combustion air inducer exceeds a speed threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system and to determine an audio signature for the combustion air inducer is not present within the audio signal. The device is further configured to determine whether an audio signature for the integrated furnace controller is present within the audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the integrated furnace controller is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
F24F 11/49 - Control or safety arrangements for purposes related to the operation of the system, e.g. for safety or monitoring ensuring correct operation, e.g. by trial operation or configuration checks
F23N 5/16 - Systems for controlling combustion using noise-sensitive detectors
F24D 19/10 - Arrangement or mounting of control or safety devices
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the amount of time to ignite a burner in a burner assembly has exceeded a time threshold value and that a flame was not detected by a flame sensor. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the flame, and to determine whether the audio signature for the flame is present within the first audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the flame is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the amount of time to close a pressure switch exceeds a time threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the combustion air inducer, and to determine the audio signature for the combustion air inducer is present within the audio signal. The device is further configured to determine a fault type based on the determination that the audio signature for the combustion air inducer is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the speed of a combustion air inducer has exceeded a speed threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system, to identify an audio signature for the combustion air inducer from an audio signature library, and to determine the audio signature for the combustion air inducer is present within the audio signal. The device is further configured to determine a fault type based on the determination that the audio signature for the combustion air inducer is present within the audio signal, to identify a component identifier for a component of the HVAC system that is associated with fault type, and to output a recommendation identifying the component identifier.
A device is configured to operate a Heating, Ventilation, and Air Conditioning (HVAC) system. The device is further configured to determine that the amount of time to close a pressure switch exceeds a time threshold value. The device is further configured to receive an audio signal from a microphone while operating the HVAC system and to determine that an audio signature for a combustion air inducer is not present within the audio signal. The device is further configured to determine whether an audio signature for an integrated furnace controller is present within the audio signal. The device is further configured to determine a fault type based on the determination of whether the audio signature for the integrated furnace controller is present within the audio signal, to identify a component identifier for a component of the HVAC system associated with fault type, and to output a recommendation identifying the component identifier.
In an embodiment, a multiple-antenna heating, ventilation and air conditioning (HVAC) system includes a first antenna disposed along a return airflow path from an enclosed space to the multiple-antenna HVAC system, where the multiple-antenna HVAC system supplies conditioned air to the enclosed space. The multiple-antenna HVAC system also includes a second antenna disposed outside the return airflow path. The multiple-antenna HVAC system also includes a controller in communication with the first antenna and the second antenna, where the controller wirelessly communicates via the first antenna and the second antenna.
H01Q 1/44 - ANTENNAS, i.e. RADIO AERIALS - Details of, or arrangements associated with, antennas using equipment having another main function to serve additionally as an antenna
H04W 48/08 - Access restriction or access information delivery, e.g. discovery data delivery
H04B 7/06 - Diversity systems; Multi-antenna systems, i.e. transmission or reception using multiple antennas using two or more spaced independent antennas at the transmitting station
An occupancy tracking device configured to receive a plurality of sound samples over a predetermined time period. The device is further configured to compute an audio signature for each sound sample. The audio signature includes a numerical value that uniquely identifies characteristics of an audio signal. The device is further configured to populate entries in the voice data log for the sound samples, to identify one or more clusters based on an audio signature that is associated with the populated entries, and to determine a number of clusters that are identified. The device is further configured to determine a predicted occupancy level based on the number of clusters that are identified and to control a Heating, Ventilation, and Air Conditioning (HVAC) system based on the predicted occupancy level.
H04R 1/40 - Arrangements for obtaining desired frequency or directional characteristics for obtaining desired directional characteristic only by combining a number of identical transducers
G10L 15/22 - Procedures used during a speech recognition process, e.g. man-machine dialog
G10L 25/51 - Speech or voice analysis techniques not restricted to a single one of groups specially adapted for particular use for comparison or discrimination