Goods & Services

Disposable baby diapers; Babies' diaper-pants; and training pants. Environmental and physiological sensors, monitors, digital cameras, electronic hardware, and computer and mobile application software.

Goods & Services

Disposable baby diapers, baby diaper pants, and training pants Environmental and physiological sensors, monitors, digital cameras, electronic hardware, and computer and mobile application software

Abstract

A nonwoven substrate for an absorbent article including a layer of fibers is provided. The nonwoven substrate has a low surface tension fluid strikethrough time to basis weight ratio in the range of about 0.37 s/gsm to about 5 s/gsm. A plurality of the fibers each include fibrils extending outwardly from a surface of the fibers. The plurality of the fibers are made from a composition including a polyolefin and about 11% to about 35% of glycerol tristearate by weight of the composition. The nonwoven substrate has a specific surface area in the range of about 1 m2/g to about 4 m2/g.

IPC Classes

• A61F 13/551 - Packages or wrapping arrangements for used pads, e.g. for disposal
• A61F 13/511 - Topsheet, i.e. the permeable cover or layer facing the skin
• A61F 13/514 - Backsheet, i.e. the impermeable cover or layer furthest from the skin
• A61F 13/53 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium
• D04H 1/42 - Non-woven fabrics formed wholly or mainly of staple fibres or like relatively short fibres from fleeces or layers composed of fibres without existing or potential cohesive properties characterised by the use of certain kinds of fibres insofar as this use has no preponderant influence on the consolidation of the fleece
• A61L 15/34 - Oils, fats, waxes, or natural resins
• A47L 13/17 - Cloths; Pads; Sponges containing cleaning agents
• D04H 1/4291 - Olefin series
• A61F 13/51 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the outer layers of the pads

Abstract

A composition that includes of detersive surfactant, external structurant or thickener, and C4-C10 alkyl branched alcohol.

IPC Classes

• C11D 1/831 - Mixtures of non-ionic with anionic compounds of sulfonates with ethers of polyoxyalkylenes without phosphates
• C11D 11/00 - Special methods for preparing compositions containing mixtures of detergents
• C11D 3/43 - Solvents
• C11D 3/37 - Polymers
• C11D 3/20 - Organic compounds containing oxygen
• C11D 1/94 - Mixtures with anionic, cationic or non-ionic compounds

Abstract

An absorbent article is disclosed. The absorbent article having a topsheet, a backsheet, and an absorbent core structure having one or more layers. The absorbent article has multiple zones.

IPC Classes

• A61F 13/535 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad inhomogeneous in the plane of the pad, e.g. core absorbent layers being of different sizes
• A61F 13/475 - Sanitary towels, incontinence pads or napkins characterised by edge leakage prevention means
• A61F 13/539 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium characterised by the connection of absorbent layers with each other or with the outer layers

Abstract

An absorbent article is disclosed. The absorbent article having a topsheet, a backsheet, and an absorbent core structure having one or more layers. The absorbent article has multiple zones.

IPC Classes

• A61F 13/535 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad inhomogeneous in the plane of the pad, e.g. core absorbent layers being of different sizes
• A61F 13/84 - Accessories, not otherwise provided for, for absorbent pads

Abstract

A method for reducing a tetrazolium salt.

IPC Classes

• C12Q 1/32 - Measuring or testing processes involving enzymes or micro-organisms; Compositions therefor; Processes of preparing such compositions involving oxidoreductase involving dehydrogenase
• C12Q 1/00 - Measuring or testing processes involving enzymes or micro-organisms; Compositions therefor; Processes of preparing such compositions

Abstract

The present invention relates to electric appliances for personal care, in particular electric shavers, comprising a drive unit having first and second drive components adapted to magnetically interact with each other, and a magnetic shielding at least partially surrounding the drive unit. Said magnetic shielding is formed by structural parts supporting the drive unit and/or transmitting drive movements of the drive unit, wherein such structural parts are made of a soft magnetic material. More particularly, a mounting frame and a transmitter frame together form a magnetic shielding cage which is movable as the mounting frame and the transmitter frame are movable relative to each other.

IPC Classes

• B26B 19/28 - Drive layout for hair clippers or dry shavers, e.g. providing for electromotive drive
• B26B 19/38 - Details of, or accessories for, hair clippers, or dry shavers, e.g. housings, casings, grips, guards

Abstract

A method for controlling a charging device transferring energy to an electrical load of an inductively coupled household appliance. The circuitry of the device includes an oscillator circuit having at least one output power coil element and one capacitor element; an electrical power source; a power-switching element feeding the oscillator circuit with electrical power; a sensor element for determining an electrical signal value indicative of the inductance of the oscillator circuit; and a microprocessor configured to adapt the electrical energy provided by the oscillator circuit dependent on a comparison of the measured electrical signal with a threshold. The method includes the steps of activating a threshold determining mode of the microprocessor starting upon the proximate powering up of the microprocessor and determining the threshold automatically after the proximate powering up of the microprocessor.

IPC Classes

• H02J 50/10 - Circuit arrangements or systems for wireless supply or distribution of electric power using inductive coupling
• H02J 7/02 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries for charging batteries from ac mains by converters
• H02J 7/04 - Regulation of the charging current or voltage

Abstract

A method of monitoring and controlling a molding clamping apparatus in an injection molding or other molding process is disclosed. The method includes creating a target strain profile, receiving a deviation limit, receiving a change in strain relating to a mold while it is closing from a first strain gauge, identifying a deviation from a target strain profile based on the output from the first strain gauge, determining that the deviation exceeds the deviation limit, and adjusting the rate or force of clamp movement. The target strain profile may have a first portion relating to a clamp closing process, a second portion relating to a filling process, and a third portion relating to a clamp opening process. The first portion relating to the clamp closing process may include an intermediate portion relating to a coining process having an intermediate clamp force setpoint.

IPC Classes

• B29C 45/76 - Measuring, controlling or regulating
• G05B 19/042 - Programme control other than numerical control, i.e. in sequence controllers or logic controllers using digital processors

Abstract

A plastic bottle for containing perfume compositions and having improved crazing resistance is disclosed. The plastic bottle comprises PEF

IPC Classes

• A45D 34/00 - Containers or accessories specially adapted for handling liquid toilet or cosmetic substances, e.g. perfumes
• B65D 41/00 - Caps, e.g. crown caps, crown seals, i.e. members having parts arranged for engagement with the external periphery of a neck or wall defining a pouring opening or discharge aperture; Protective cap-like covers for closure members, e.g. decorative covers of metal foil or paper
• B32B 1/02 - Receptacles, e.g. tanks
• B65D 1/40 - Details of walls
• B65D 41/02 - Caps or cap-like covers without lines of weakness, tearing strips, tags, or like opening or removal devices
• B65D 23/14 - Means for the attachment of smaller articles of tags
• B65D 1/02 - Bottles or similar containers with necks or like restricted apertures, designed for pouring contents

Abstract

The present disclosure relates to methods and apparatuses for mechanically bonding substrates together. The apparatuses may include a pattern roll having three or more pattern elements protruding radially outward, wherein each pattern element includes a pattern surface. The pattern surfaces are also separated from each other by gaps having minimum widths. The pattern roll may be adjacent an anvil roll to define a nip between the pattern surfaces and the anvil roll, wherein the pattern roll is biased toward the anvil roll to define a nip pressure between pattern surfaces and the anvil roll. As substrates advance between the pattern roll and anvil roll, the substrates are compressed between the anvil roll and the pattern surfaces to form a discrete bond region between the substrates. During the bonding process, some of yielded substrate material also flows from under the pattern surfaces and into the gaps to form gap grommet regions.

IPC Classes

• A61F 13/15 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators
• B29C 65/00 - Joining of preformed parts; Apparatus therefor
• B29C 65/02 - Joining of preformed parts; Apparatus therefor by heating, with or without pressure
• B29C 65/56 - Joining of preformed parts; Apparatus therefor using mechanical means
• B29C 65/60 - Riveting
• B29C 65/78 - Means for handling the parts to be joined, e.g. for making containers or hollow articles
• B29C 65/82 - Testing the joint
• B29L 31/48 - Wearing apparel
• B29C 65/18 - Joining of preformed parts; Apparatus therefor by heating, with or without pressure using heated tool
• B29C 65/52 - Applying the adhesive

Abstract

Sanitary tissue products employing fibrous structures that exhibit a novel combination of compressibility properties, plate stiffness properties, and slip stick coefficient of friction properties, and methods for making same.

IPC Classes

• D21H 27/02 - Patterned paper
• D21H 27/40 - Multi-ply at least one of the sheets being non-planar, e.g. crêped
• D21H 11/04 - Kraft or sulfate pulp
• D21H 27/00 - Special paper not otherwise provided for, e.g. made by multi-step processes
• D21H 11/00 - Pulp or paper, comprising cellulose or lignocellulose fibres of natural origin only

Abstract

An electrical circuit for charging a secondary battery that comprises a dc-converter and an output connector that can be connected to the positive terminal of the secondary battery for applying a charging current to the secondary battery. The dc-converter has a voltage feedback connector for sensing a feedback voltage, wherein the dc-converter is adapted to regulate the output voltage by adjusting the output current at the output connector depending on the sensed feedback voltage and a feedback-sub-circuit connected to the output connector and to the voltage feedback connector of the dc-converter.

IPC Classes

• H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries

Abstract

Compositions, such as laundry detergent compositions, that include detersive surfactant and C4-C10 alkyl branched alcohol.

IPC Classes

• C11D 1/831 - Mixtures of non-ionic with anionic compounds of sulfonates with ethers of polyoxyalkylenes without phosphates
• C11D 3/43 - Solvents
• C11D 3/20 - Organic compounds containing oxygen
• C11D 11/00 - Special methods for preparing compositions containing mixtures of detergents

Abstract

A laminate comprises a first layer comprising a plurality of lower opacity zones positioned within a higher opacity zone is provided. The plurality of lower opacity zones form a first pattern. The laminate comprises a second layer comprising a second pattern. The laminate comprises a non-joined span of the first and second layers having a dimension of at least about 20 mm. A first portion of the second pattern is visible through at least some of the plurality of lower opacity zones when the first layer, within the non-joined span, is in a first position relative to the second layer, within the non-joined span. A second portion of the second pattern is visible through at least some of the plurality of lower opacity zones when the first layer, within the non-joined span, is in a second position relative to the first layer, within the non-joined span.

IPC Classes

• A61F 13/15 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators
• A61F 13/511 - Topsheet, i.e. the permeable cover or layer facing the skin
• B32B 5/14 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by a layer differing constitutionally or physically in different parts, e.g. denser near its faces
• A61F 13/512 - Topsheet, i.e. the permeable cover or layer facing the skin characterised by its apertures, e.g. perforations
• A61F 13/514 - Backsheet, i.e. the impermeable cover or layer furthest from the skin
• A61F 13/515 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the outer layers of the pads characterised by the interconnection of the topsheet and the backsheet
• A61F 13/551 - Packages or wrapping arrangements for used pads, e.g. for disposal
• A61F 13/84 - Accessories, not otherwise provided for, for absorbent pads
• B32B 3/26 - Layered products essentially comprising a layer with external or internal discontinuities or unevennesses, or a layer of non-planar form; Layered products essentially having particular features of form characterised by a layer with cavities or internal voids
• B32B 5/02 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by structural features of a layer comprising fibres or filaments
• B29C 55/10 - Shaping by stretching, e.g. drawing through a die; Apparatus therefor of plates or sheets multiaxial
• D04H 5/06 - Non woven fabrics formed of mixtures of relatively short fibres and yarns or like filamentary material of substantial length strengthened or consolidated by welding-together thermoplastic fibres, filaments, or yarns
• B32B 5/26 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by the presence of two or more layers which comprise fibres, filaments, granules, or powder, or are foamed or specifically porous one layer being a fibrous or filamentary layer another layer also being fibrous or filamentary
• A61F 13/51 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the outer layers of the pads
• B29L 7/00 - Flat articles, e.g. films or sheets

Goods & Services

Soaps; perfumery; essential oils; cosmetics; hair lotions; dentifrices; cosmetic preparations for the hair and scalp; skin care preparations; cosmetic hair care preparations; hair cleaning preparations; hair styling preparations; hair tinting preparations; hair bleaching preparations; hair dyeing preparations; hair coloring preparations.

Abstract

A method for reducing a tetrazolium salt.

IPC Classes

• G01N 33/48 - Biological material, e.g. blood, urine; Haemocytometers
• G01N 1/28 - Preparing specimens for investigation
• G01N 33/483 - Physical analysis of biological material
• G01N 33/53 - Immunoassay; Biospecific binding assay; Materials therefor

Goods & Services

Card games

Abstract

In one embodiment, an array of packages may comprise two or more different sizes of disposable absorbent articles. The Array Average Length Difference of at least the first and second absorbent articles in the array is less than about 65 mm and greater than about negative 10 mm. In another embodiment, a disposable absorbent article may have a Product Length is within about +/−40 mm of the Target Rise.

IPC Classes

• A61F 13/551 - Packages or wrapping arrangements for used pads, e.g. for disposal
• A61F 13/84 - Accessories, not otherwise provided for, for absorbent pads
• A61F 13/49 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the shape specially adapted to be worn around the waist, e.g. diapers, nappies
• A61F 13/53 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium

Abstract

Synthesis methods to produce a series of carboxamides built off of an (S)-2-amino acid backbone or an (R)-2-amino acid backbone, depending upon the desired diastereomer of the end product.

IPC Classes

• C07C 237/10 - Carboxylic acid amides, the carbon skeleton of the acid part being further substituted by amino groups having the carbon atoms of the carboxamide groups bound to acyclic carbon atoms of the carbon skeleton the carbon skeleton being acyclic and saturated having the nitrogen atom of at least one of the carboxamide groups bound to an acyclic carbon atom of a hydrocarbon radical substituted by nitrogen atoms not being part of nitro or nitroso groups
• C07C 269/06 - Preparation of derivatives of carbamic acid, i.e. compounds containing any of the groups the nitrogen atom not being part of nitro or nitroso groups by reactions not involving the formation of carbamate groups
• C07C 231/02 - Preparation of carboxylic acid amides from carboxylic acids or from esters, anhydrides, or halides thereof by reaction with ammonia or amines
• C07D 213/81 - Amides; Imides
• C07C 319/20 - Preparation of thiols, sulfides, hydropolysulfides or polysulfides of sulfides by reactions not involving the formation of sulfide groups
• A61K 8/41 - Amines
• A61Q 11/00 - Preparations for care of the teeth, of the oral cavity or of dentures, e.g. dentifrices or toothpastes; Mouth rinses
• C07C 233/62 - Carboxylic acid amides having carbon atoms of carboxamide groups bound to carbon atoms of rings other than six-membered aromatic rings having the nitrogen atom of at least one of the carboxamide groups bound to a carbon atom of a hydrocarbon radical substituted by amino groups
• C07C 271/20 - Esters of carbamic acids having oxygen atoms of carbamate groups bound to acyclic carbon atoms with the nitrogen atoms of the carbamate groups bound to hydrogen atoms or to acyclic carbon atoms to carbon atoms of hydrocarbon radicals substituted by nitrogen atoms not being part of nitro or nitroso groups
• C07C 271/22 - Esters of carbamic acids having oxygen atoms of carbamate groups bound to acyclic carbon atoms with the nitrogen atoms of the carbamate groups bound to hydrogen atoms or to acyclic carbon atoms to carbon atoms of hydrocarbon radicals substituted by carboxyl groups
• C07C 237/22 - Carboxylic acid amides, the carbon skeleton of the acid part being further substituted by amino groups having the carbon atoms of the carboxamide groups bound to acyclic carbon atoms of the carbon skeleton having nitrogen atoms of amino groups bound to the carbon skeleton of the acid part, further acylated
• C07C 233/78 - Carboxylic acid amides having carbon atoms of carboxamide groups bound to carbon atoms of six-membered aromatic rings having the nitrogen atom of at least one of the carboxamide groups bound to a carbon atom of a hydrocarbon radical substituted by amino groups with the substituted hydrocarbon radical bound to the nitrogen atom of the carboxamide group by an acyclic carbon atom
• C07C 321/14 - Sulfides, hydropolysulfides, or polysulfides having thio groups bound to acyclic carbon atoms of an acyclic saturated carbon skeleton

Abstract

Described herein is a method for treating hair including: (a) putting the hair in a desired shape; (b) before and/or after the hair is put in the desired shape, applying a reducing composition to the hair including: (i) from about 2.5% to about 15% of a cationic mercapto amino pyridinium compound or a cationic dimercapto amino pyridinium compound; (ii) from about 4% to about 10% of a buffering system; and (iii) from about 50% to about 93.5% of a solvent; (c) rinsing the reducing composition from the hair; (d) applying an oxidizing composition to the hair including: (i) from about 0.5% to about 12% of an oxidizing agent; and (ii) from about 80% to about 97% of a solvent; and (e) rinsing the oxidizing composition from the hair. The reducing composition has a pH of from about 8 to about 10.5;

IPC Classes

• A61K 8/49 - Cosmetics or similar toilet preparations characterised by the composition containing organic compounds containing heterocyclic compounds
• A61K 8/22 - Peroxides; Oxygen; Ozone
• A61K 8/19 - Cosmetics or similar toilet preparations characterised by the composition containing inorganic ingredients
• A61Q 5/06 - Preparations for styling the hair, e.g. by temporary shaping or colouring
• A61Q 9/04 - Depilatories
• A45D 7/04 - Processes of waving, straightening or curling hair chemical

Abstract

Methods of opening and adding expansion materials to containers made from flexible materials. The methods involve forming a partially completed container blank that may have four layers of flexible materials. The partially completed container blank may be opened by separating a portion of the first layer from a portion of the second layer by bending portions of the second, third, and fourth layers toward a first direction; and dosing the partially completed container blank, by adding an expansion material out of a dispenser and into a space disposed between a portion of the first layer and a portion of the second layer.

IPC Classes

• B65B 31/00 - Packaging articles or materials under special atmospheric or gaseous conditions; Adding propellants to aerosol containers
• B65D 75/00 - Packages comprising articles or materials partially or wholly enclosed in strips, sheets, blanks, tubes, or webs of flexible sheet material, e.g. in folded wrappers
• B65D 6/00 - Containers having bodies formed by interconnecting or uniting two or more rigid, or substantially rigid, components made wholly or mainly of metal, plastics, wood or substitutes therefor
• B65B 39/00 - Nozzles, funnels or guides for introducing articles or materials into containers or wrappers

Abstract

Described herein is a chemical class of odorless thiols which can serve as reducing agents. This chemical class involves thiols which can be used as reducing agents for permanent styling treatments, depilatory compositions and other applications. The odorless thiols are thiols having a heterocyclic quaternary ammonium salt in their molecule.

IPC Classes

• C07D 213/42 - Radicals substituted by singly-bound nitrogen atoms having hetero atoms attached to the substituent nitrogen atom
• C07D 213/34 - Sulfur atoms to which a second hetero atom is attached
• A61Q 5/04 - Preparations for permanent waving or straightening the hair
• A61Q 9/04 - Depilatories

Abstract

Described herein is a lotion composition including a soil capture polymer, the soil capture polymer having a number average molecular weight of at least 1,000,000 and a cationic charge of at least 1 meq/g, and the lotion pH being from about 3.5 to about 5.5. The lotion composition may be incorporated along with a substrate into a wet wipe.

IPC Classes

• A61K 8/81 - Cosmetics or similar toilet preparations characterised by the composition containing organic macromolecular compounds obtained by reactions involving only carbon-to-carbon unsaturated bonds
• A61Q 19/00 - Preparations for care of the skin
• A61Q 19/10 - Washing or bathing preparations
• A61K 8/02 - Cosmetics or similar toilet preparations characterised by special physical form

Abstract

In methods of making disposable, flexible containers for fluent products, methods of sealing the flexible containers when such containers include expansion materials, are disclosed. The methods include forming a partially completed container blank that has layers of flexible materials. The layered structure includes a first space for a fluent product, and a second space for an expansion material. The methods of sealing the flexible containers include adding an expansion material into the second space and pressing parts of at least some of the layers together to close off the second space.

IPC Classes

• B65B 61/24 - Auxiliary devices, not otherwise provided for, for operating on sheets, blanks, webs, binding material, containers or packages for shaping or reshaping completed packages
• B65B 1/02 - Machines characterised by the incorporation of means for making the containers or receptacles
• B65B 3/02 - Machines characterised by the incorporation of means for making the containers or receptacles
• B65D 75/00 - Packages comprising articles or materials partially or wholly enclosed in strips, sheets, blanks, tubes, or webs of flexible sheet material, e.g. in folded wrappers
• B65D 75/26 - Articles or materials wholly enclosed in laminated sheets or wrapper blanks
• B65D 65/40 - Applications of laminates for particular packaging purposes

Abstract

A packing system for a plurality of articles comprising: first and second packages; wherein each of the first and second packages comprises: a housing comprising a front wall and a rear wall, wherein the rear wall comprises a recessed portion; an article disposed within the housing, at least a part of the article protruding from the front wall of the housing; wherein the rear wall comprises a recessed portion, a shape of the recessed portion corresponding to a profile of the at least a part of the article protruding from the front wall, wherein the front wall of the second package is adjacent to the rear wall of the first package.

IPC Classes

• B65D 75/36 - Articles or materials enclosed between two opposed sheets or blanks having their margins united, e.g. by pressure-sensitive adhesive, crimping, heat-sealing, or welding one or both sheets or blanks being recessed to accommodate contents one sheet or blank being recessed and the other formed of relatively stiff flat sheet material, e.g. blister packages
• B65B 35/56 - Orientating, i.e. changing the attitude of, articles, e.g. of non-uniform cross-section
• B65D 75/52 - Details
• B65D 77/04 - Articles or materials enclosed in two or more containers disposed one within another

Abstract

An apparatus and process for dispensing a measured quantity of liquid from a container. The apparatus includes a pour chamber having a dam, a spout, a vent, and a timer that is independent of flow in the pour chamber.

IPC Classes

• A47K 5/12 - Dispensers for soap for liquid or pasty soap
• B65D 47/04 - Closures with discharging devices other than pumps

Abstract

A hair care composition comprising from about 10% to about 25% of one or more surfactants; from about 0.01% to 10% of one or more surfactant soluble antidandruff agents; from about 0.5% to 10% of one or more thickening polymers that are able to raise the viscosity of the formulation to at least 3000 cps at 2 s−1; wherein the composition without thickening polymer has a viscosity of less than about 3000 cps at 2 s−1 and is unable to be thickened above 3000 cps at 2 s−1 with sodium chloride salt in the range of about 0.1% to about 3%.

IPC Classes

• A61K 8/81 - Cosmetics or similar toilet preparations characterised by the composition containing organic macromolecular compounds obtained by reactions involving only carbon-to-carbon unsaturated bonds
• A61Q 5/00 - Preparations for care of the hair
• A61K 8/46 - Cosmetics or similar toilet preparations characterised by the composition containing organic compounds containing sulfur
• A61K 8/49 - Cosmetics or similar toilet preparations characterised by the composition containing organic compounds containing heterocyclic compounds
• A61Q 5/02 - Preparations for cleaning the hair
• A61K 8/42 - Amides
• A61Q 5/12 - Preparations containing hair conditioners
• A61K 8/04 - Dispersions; Emulsions
• A61K 8/89 - Polysiloxanes
• A61K 8/365 - Hydroxycarboxylic acids; Ketocarboxylic acids
• A61K 8/34 - Alcohols
• A61K 8/37 - Esters of carboxylic acids

Abstract

The present invention relates to electric appliances for personal care, in particular electric shavers, comprising a magnetic linear drive unit having first and second drive components supported for linear displacement relative to each other by a first spring device and adapted to magnetically interact with each other, and a second spring device for movably linking the drive unit to a structural element of the appliance. The first spring device is made from plastics such as long-chained PPS, whereas the second spring device is made from steel.

IPC Classes

• B26B 19/28 - Drive layout for hair clippers or dry shavers, e.g. providing for electromotive drive
• H02K 7/14 - Structural association with mechanical loads, e.g. with hand-held machine tools or fans
• H02K 33/02 - Motors with reciprocating, oscillating or vibrating magnet, armature or coil system with armatures moved one way by energisation of a single coil system and returned by mechanical force, e.g. by springs

Abstract

The present invention relates to electric appliances for personal care, in particular electric shavers, comprising a magnetic linear drive unit having first and second drive components supported for linear displacement relative to each other by a spring device and adapted to magnetically interact with each other. Said spring device includes a ring element made in one piece from plastic including at least one pair of leaf springs and a pair of cross-bars extending crosswise to said leaf springs and connecting said leaf springs to each other.

IPC Classes

• B26B 19/28 - Drive layout for hair clippers or dry shavers, e.g. providing for electromotive drive
• B26B 19/38 - Details of, or accessories for, hair clippers, or dry shavers, e.g. housings, casings, grips, guards
• H02K 7/14 - Structural association with mechanical loads, e.g. with hand-held machine tools or fans
• H02K 33/02 - Motors with reciprocating, oscillating or vibrating magnet, armature or coil system with armatures moved one way by energisation of a single coil system and returned by mechanical force, e.g. by springs

Abstract

An absorbent article comprising a topsheet, an outer cover, at least one chassis component, and an absorbent core disposed between the topsheet and outer cover, wherein at least one of the outer cover or chassis component comprises a laminate comprising at least one nonwoven layer and at least one multilayer film, wherein the multilayer film has at least four layers and comprises at least one inner layer comprising one or more elastomeric components, at least one outer layer comprising a plastoelastic component, and at least one additional polymeric layer that is disposed next to an inner layer.

IPC Classes

• A61L 15/22 - Bandages, dressings or absorbent pads for physiological fluids such as urine or blood, e.g. sanitary towels, tampons containing macromolecular materials
• A61F 13/514 - Backsheet, i.e. the impermeable cover or layer furthest from the skin
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• B32B 5/02 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by structural features of a layer comprising fibres or filaments
• B32B 27/08 - Layered products essentially comprising synthetic resin as the main or only constituent of a layer next to another layer of a specific substance of synthetic resin of a different kind
• B32B 27/12 - Layered products essentially comprising synthetic resin next to a fibrous or filamentary layer
• A61L 15/58 - Adhesives

Abstract

A hair care composition comprising from about 10% to about 25% of one or more surfactants; from about 0.01% to 10% of one or more surfactant soluble antidandruff agents; from about 0.1% to 10% of one or more anionic polymers from about 0.01% to 5% of one or more cationic polymers; wherein the composition has a deposition efficiency of greater than 1.2X that of a control composition wherein the control composition comprises 14% SLE1S, no polymeric constituents, 1% of the surfactant soluble antidandruff agent at a pH of about 6.

IPC Classes

• A61K 8/81 - Cosmetics or similar toilet preparations characterised by the composition containing organic macromolecular compounds obtained by reactions involving only carbon-to-carbon unsaturated bonds
• A61K 8/73 - Polysaccharides
• A61K 8/49 - Cosmetics or similar toilet preparations characterised by the composition containing organic compounds containing heterocyclic compounds
• A61K 8/04 - Dispersions; Emulsions
• A61Q 5/02 - Preparations for cleaning the hair
• A61Q 5/00 - Preparations for care of the hair

Abstract

The present invention relates to electric appliances for personal care, in particular electric shavers, comprising a magnetic linear drive unit having first and second drive components supported for linear displacement relative to each other by a spring device and adapted to magnetically interact with each other. Said spring device includes at least one leaf spring having a constricted section in a central region of the leaf spring, wherein surfaces of said at least one leaf spring neighboring said constricted section are shaped convex. Such convex surfaces may have a parabolic contour.

IPC Classes

• B26B 19/04 - Cutting heads therefor; Cutters therefor; Securing equipment thereof
• B26B 19/28 - Drive layout for hair clippers or dry shavers, e.g. providing for electromotive drive

Abstract

The present invention relates to disposable absorbent articles such as sanitary napkins, panty liners, baby diapers, adult incontinence articles and sweat pads. According to the present invention the absorbent article in the region designated for liquid deposition on its wearer facing surface has a single layer topsheet onto which liquid to be absorbed is provided during use of the article. The absorbent article includes a backsheet forming the liquid barrier surface and a unitary absorbent core between the topsheet and the backsheet. Importantly the unitary core provides improved liquid handling to the absorbent article and increases the masking, i.e. ability to hide stains due to absorbed liquid, of the article. This is particularly beneficial in the context of articles for absorption of liquids with high color intensity, such as menstrual liquid or urine of older adults.

IPC Classes

• A61F 13/534 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad
• A61F 13/49 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the shape specially adapted to be worn around the waist, e.g. diapers, nappies
• A61F 13/53 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium
• A61F 13/535 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad inhomogeneous in the plane of the pad, e.g. core absorbent layers being of different sizes
• A61F 13/537 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad characterised by a layer facilitating or inhibiting flow in one direction or plane, e.g. a wicking layer
• A61L 15/28 - Polysaccharides or their derivatives
• A61F 13/539 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium characterised by the connection of absorbent layers with each other or with the outer layers
• A61F 13/47 - Sanitary towels, incontinence pads or napkins
• A61F 13/62 - Fabric strip fastener elements, e.g. hook and loop
• A61F 13/56 - Supporting or fastening means

Goods & Services

Fabric softeners

Goods & Services

(1) Hair care preparations

Goods & Services

(1) Medicinal tea

Abstract

An actuator includes a nozzle; a valve; and a trigger operatively connected with the valve, wherein the trigger comprises an elastomeric material, wherein the trigger is configured to reciprocate from a forward position to a rearward position and back to a forward position upon actuation, wherein upon actuation from a forward position to a rearward position the trigger comprises a changing moment arm.

IPC Classes

• B05B 11/00 - Single-unit, i.e. unitary, hand-held apparatus in which flow of liquid or other fluent material is produced by the operator at the moment of use

Abstract

Agglomerated superabsorbent polymer particles is provided and obtained by a method including the steps of (a) providing precursor superabsorbent polymer particles having a first mass average particle size 1mAvPS, a first particle diameter “1D10” of not less than 30 μm and a first particle diameter “1D90”, (b) mixing the precursor superabsorbent polymer particles with a solution including polymerizable monomers and/or oligomers, or crosslinkable polymers, and (c) polymerizing the mixed solution if the solution includes polymerizable monomers and/or oligomers or crosslinking the mixed solution if the solution includes crosslinkable polymers. The agglomerated superabsorbent polymer particles have a second particle diameter “2D10” and a second particle diameter “2D90”. The size ratio between the second particle diameter “2D90” and the first particle diameter “1D10” is determined by the following equation: Agglomerated superabsorbent polymer particles is provided and obtained by a method including the steps of (a) providing precursor superabsorbent polymer particles having a first mass average particle size 1mAvPS, a first particle diameter “1D10” of not less than 30 μm and a first particle diameter “1D90”, (b) mixing the precursor superabsorbent polymer particles with a solution including polymerizable monomers and/or oligomers, or crosslinkable polymers, and (c) polymerizing the mixed solution if the solution includes polymerizable monomers and/or oligomers or crosslinking the mixed solution if the solution includes crosslinkable polymers. The agglomerated superabsorbent polymer particles have a second particle diameter “2D10” and a second particle diameter “2D90”. The size ratio between the second particle diameter “2D90” and the first particle diameter “1D10” is determined by the following equation: 7 < SizeRatio = D 90 2 D 10 1 < 21 ( I )

IPC Classes

• C08K 3/34 - Silicon-containing compounds
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• A61L 15/60 - Liquid-swellable gel-forming materials, e.g. super-absorbents
• A61L 15/18 - Bandages, dressings or absorbent pads for physiological fluids such as urine or blood, e.g. sanitary towels, tampons containing inorganic materials
• C08K 7/00 - Use of ingredients characterised by shape
• C08J 3/24 - Crosslinking, e.g. vulcanising, of macromolecules

Abstract

A method for making water-absorbing polymer particles is provided and includes a first aqueous polymerization solution including crosslinkers, polymerizable monomers and/or oligomers and inorganic solid particles, and a second aqueous solution including inorganic solid particles, crosslinkers and either polymerizable monomers and/or oligomers, or crosslinkable polymers. The average closest distance between two neighboring crosslinkers (RXL) from the first aqueous polymerization solution or from the second aqueous solution for a specific X-load of the water-absorbing polymer particle is calculated via the formula below: A method for making water-absorbing polymer particles is provided and includes a first aqueous polymerization solution including crosslinkers, polymerizable monomers and/or oligomers and inorganic solid particles, and a second aqueous solution including inorganic solid particles, crosslinkers and either polymerizable monomers and/or oligomers, or crosslinkable polymers. The average closest distance between two neighboring crosslinkers (RXL) from the first aqueous polymerization solution or from the second aqueous solution for a specific X-load of the water-absorbing polymer particle is calculated via the formula below: Rxl = ( ( 1 rho_dry + x_L rho_liq ) N A · ∑ i  w_xl i Mr_CSL i ) 1 3 ( I )

IPC Classes

• A61L 15/60 - Liquid-swellable gel-forming materials, e.g. super-absorbents
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• A61L 15/18 - Bandages, dressings or absorbent pads for physiological fluids such as urine or blood, e.g. sanitary towels, tampons containing inorganic materials
• C08J 3/24 - Crosslinking, e.g. vulcanising, of macromolecules
• C08K 3/34 - Silicon-containing compounds

Abstract

Dentifrice composition comprising at least one phase containing activated carbon and interference pigment.

IPC Classes

• A61K 8/19 - Cosmetics or similar toilet preparations characterised by the composition containing inorganic ingredients
• A61Q 11/00 - Preparations for care of the teeth, of the oral cavity or of dentures, e.g. dentifrices or toothpastes; Mouth rinses
• A61K 8/29 - Titanium; Compounds thereof
• A61K 8/25 - Silicon; Compounds thereof
• A61K 8/26 - Aluminium; Compounds thereof
• A61K 8/21 - Fluorides; Derivatives thereof

Abstract

A layered fibrous structure having a first layer including a co-formed fibrous structure containing a plurality of first filaments and a plurality of solid additives and a second layer different from the first layer, wherein the second layer includes a plurality of second filaments is provided.

IPC Classes

• D21H 27/30 - Multi-ply
• D04H 1/425 - Cellulose series
• D04H 1/56 - Non-woven fabrics formed wholly or mainly of staple fibres or like relatively short fibres from fleeces or layers composed of fibres without existing or potential cohesive properties by welding together the fibres, e.g. by partially melting or dissolving in association with fibre formation, e.g. immediately following extrusion of staple fibres
• D04H 1/407 - Non-woven fabrics formed wholly or mainly of staple fibres or like relatively short fibres from fleeces or layers composed of fibres without existing or potential cohesive properties containing absorbing substances, e.g. activated carbon
• D21H 11/12 - Pulp from non-woody plants or crops, e.g. cotton, flax, straw or bagasse
• D21H 15/06 - Long fibres, i.e. fibres exceeding the upper length limit of conventional paper-making fibres; Filaments
• D21H 17/25 - Cellulose
• D21H 17/28 - Starch
• D21H 13/14 - Polyalkenes, e.g. polystyrene

Goods & Services

Multi-symptom cough mixture; nasal decongestant; cough mixture preparation for the relief of cough, head and chest congestion; and cough mixture for the relief of could and flu symptoms

Abstract

A method for making water-absorbing polymer particles is provided and includes providing crosslinkers, polymerizable monomers and inorganic solid particles. The average closest distance between two neighboring crosslinkers (RXL) in a water-absorbing polymer particle for a specific X-load of the water-absorbing polymer particle is calculated via the formula below: A method for making water-absorbing polymer particles is provided and includes providing crosslinkers, polymerizable monomers and inorganic solid particles. The average closest distance between two neighboring crosslinkers (RXL) in a water-absorbing polymer particle for a specific X-load of the water-absorbing polymer particle is calculated via the formula below: Rxl = ( ( 1 rho_dry + x_L rho_liq ) N A · ∑ i   w_xl i Mr_CXL i ) 1 3 ( I ) with x_L being the amount of liquid absorbed in the water-absorbing polymer particle in g liq/g water-absorbing polymer particle, rho_liq being the density at room temperature of the fluid that swells the water-absorbing polymer particle (generally saline of 0.9% w NaCl) in g/cm3, rho_dry being the true density of the dry water-absorbing polymer particle in g/cm3, Mr_CXL being the molar mass of the crosslinkers in g/mol, w_xl being the weight ratio of crosslinkers in dry water-absorbing polymer particle, NA being the Avogadro's number in mol−1.

IPC Classes

• C08K 3/34 - Silicon-containing compounds
• A61L 15/60 - Liquid-swellable gel-forming materials, e.g. super-absorbents
• A61L 15/18 - Bandages, dressings or absorbent pads for physiological fluids such as urine or blood, e.g. sanitary towels, tampons containing inorganic materials
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• C08J 3/20 - Compounding polymers with additives, e.g. colouring
• C08J 3/24 - Crosslinking, e.g. vulcanising, of macromolecules

Abstract

Superabsorbent polymer particles are provided and include clay platelets with edge modification and/or surface modification. The superabsorbent polymer particles include one, or more than one area(s) with clay platelets and one, or more than one area(s) substantially free of clay platelets. The total volume of the area(s) substantially free of clay platelets is higher than the total volume of the area(s) with clay platelets.

IPC Classes

• C08K 9/02 - Ingredients treated with inorganic substances
• A61L 15/18 - Bandages, dressings or absorbent pads for physiological fluids such as urine or blood, e.g. sanitary towels, tampons containing inorganic materials
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• A61L 15/60 - Liquid-swellable gel-forming materials, e.g. super-absorbents
• C08K 3/34 - Silicon-containing compounds
• C08K 7/00 - Use of ingredients characterised by shape
• C08J 3/20 - Compounding polymers with additives, e.g. colouring
• C08J 3/24 - Crosslinking, e.g. vulcanising, of macromolecules

Abstract

An actuator is provided. The actuator includes a nozzle; a valve; a conduit in fluid communication with the valve at one end portion and in fluid communication with the nozzle at an opposite end portion; and a trigger operatively connected with the valve, wherein the trigger includes a first zone and a second zone, wherein the first and second zones are independently movable about a common axis.

IPC Classes

• B05B 11/00 - Single-unit, i.e. unitary, hand-held apparatus in which flow of liquid or other fluent material is produced by the operator at the moment of use

Abstract

A connector is disclosed comprising at least one contact clip. The contact clip comprises an electrically conductive substrate having a longitudinal axis, a first terminal located at a first end of the substrate, wherein the first terminal comprises at least two contact tongues between which a longitudinal slot is formed, which contact tongues are elastically deformable with respect to each other in a first direction which is perpendicular to the longitudinal axis, and a second terminal located at a second end of the substrate. The connector may further comprise a chassis and a PCB. In addition, a device comprising an energy consumer, an electrical energy source, a PCB and at least one connector is disclosed.

IPC Classes

• H01R 13/11 - Resilient sockets
• H01R 13/05 - Resilient pins or blades
• H01R 13/432 - Securing in a demountable manner by locking means on resilient contact members by stamped-out resilient tongue snapping behind shoulder in base or case
• H01R 4/245 -
• H01R 4/48 - Clamped connections; Spring connections using a spring, clip or other resilient member
• H01R 12/70 - Coupling devices

Abstract

A liquid pharmaceutical suspension for oral administration containing a bismuth-containing pharmaceutical agent, a suspension system, and water. The suspension system can contain from about 0.001% to about 0.2% gellan gum and from about 0.001% to about 0.75% magnesium aluminum silicate.

IPC Classes

• A61K 47/36 - Polysaccharides; Derivatives thereof
• A61K 9/00 - Medicinal preparations characterised by special physical form
• A61K 31/29 - Antimony or bismuth compounds
• A61K 9/08 - Solutions
• A61K 31/60 - Salicylic acid; Derivatives thereof
• A61K 47/12 - Carboxylic acids; Salts or anhydrides thereof
• A61K 47/38 - Cellulose; Derivatives thereof
• A61K 47/02 - Inorganic compounds

Abstract

A method of producing a liquid pharmaceutical suspension by mixing magnesium aluminum silicate, gellan gum, bismuth subsalicylate, and methyl cellulose.

IPC Classes

• A61K 31/621 - Salicylic acid; Derivatives thereof having the carboxyl group in position 1 esterified, e.g. salsalate having the hydroxy group in position 2 esterified, e.g. benorylate
• A61K 9/00 - Medicinal preparations characterised by special physical form
• A61K 47/02 - Inorganic compounds
• A61K 31/29 - Antimony or bismuth compounds
• A61K 47/36 - Polysaccharides; Derivatives thereof
• A61K 47/38 - Cellulose; Derivatives thereof
• A61K 9/10 - Dispersions; Emulsions
• A61J 3/00 - Devices or methods specially adapted for bringing pharmaceutical products into particular physical or administering forms

Abstract

A method for making surface-coated water-absorbing polymer particles in a microfluidic device is provided. The microfluidic device includes a first microfluidic channel conveying precursor water-absorbing polymer particles, a second microfluidic channel conveying a first coating solution, a third microfluidic channel conveying water-absorbing polymer particles coated with the first coating solution, a fourth microfluidic channel conveying a first non aqueous liquid. An absorbent article includes the surface-coated water-absorbing polymer particles obtained via the method herein is also provided.

IPC Classes

• B01J 20/26 - Synthetic macromolecular compounds
• C08J 3/24 - Crosslinking, e.g. vulcanising, of macromolecules
• C08J 3/12 - Powdering or granulating
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• A61L 15/60 - Liquid-swellable gel-forming materials, e.g. super-absorbents
• B01J 20/28 - Solid sorbent compositions or filter aid compositions; Sorbents for chromatography; Processes for preparing, regenerating or reactivating thereof characterised by their form or physical properties
• B01J 20/32 - Impregnating or coating

Abstract

Agglomerated superabsorbent polymer particles are provided and obtained by a method including the steps of: (a) providing precursor superabsorbent polymer particles having a first mass average particle size 1mAvPS, (b) mixing the precursor superabsorbent polymer particles with a solution, and (c) polymerizing the mixed solution if the solution includes polymerizable monomers and/or oligomers or crosslinking the mixed solution if the solution includes crosslinkable polymers. The solution includes (i) homogeneously dispersed therein, clay platelets with opposing basal platelet surfaces and platelet edges; (ii) one or more surface modification compound(s) and/or edge modification compound(s); and (iii) polymerizable monomers and/or oligomers, or (iv) crosslinkable polymers. The agglomerated superabsorbent polymer particles have a second mass average particle size 2mAvPS which is at least 25% greater than the first mass average particle size 1mAvPS.

IPC Classes

• C08K 3/34 - Silicon-containing compounds
• C08K 7/00 - Use of ingredients characterised by shape
• C08J 3/20 - Compounding polymers with additives, e.g. colouring
• A61L 15/60 - Liquid-swellable gel-forming materials, e.g. super-absorbents
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• A61L 15/18 - Bandages, dressings or absorbent pads for physiological fluids such as urine or blood, e.g. sanitary towels, tampons containing inorganic materials

Goods & Services

(1) Dishwashing soaps

Goods & Services

(1) Dishwashing soaps; all-purpose household cleaning preparations

Goods & Services

Non-medicated skin care preparations

Goods & Services

dishwashing soaps

Goods & Services

Furniture polish

Goods & Services

dishwashing soaps; all-purpose household cleaning preparations

Abstract

A fabric softener composition comprising a quaternary ammonium ester fabric softener compound and an enzyme selected from specific nuclease enzymes, galactanase enzymes and mannanase enzymes. Also, methods of treating a fabric comprising a laundering step, optional rinsing steps and a rinse-treatment step in which the fabric is treated with an aqueous rinse liquor comprising the composition.

IPC Classes

• C11D 3/00 - Other compounding ingredients of detergent compositions covered in group
• C11D 1/62 - Quaternary ammonium compounds
• C11D 3/386 - Preparations containing enzymes

Abstract

In a method of making disposable, flexible containers for fluent products, methods of opening the flexible containers are disclosed, including methods of opening multi-layer structures to enable filling of fluent product(s). The methods may include opening a partially complete container blank made of three or more layers by separating a portion of one layer from a portion of another layer by bending portions of all of the layers outward toward a first direction; and then bending portions of at some of the layers outward toward a second direction that is within 20 degrees of opposite to the first direction.

IPC Classes

• B65B 3/02 - Machines characterised by the incorporation of means for making the containers or receptacles
• B65B 51/10 - Applying or generating heat or pressure or combinations thereof
• B65D 75/00 - Packages comprising articles or materials partially or wholly enclosed in strips, sheets, blanks, tubes, or webs of flexible sheet material, e.g. in folded wrappers
• B32B 1/02 - Receptacles, e.g. tanks
• B32B 7/12 - Layered products characterised by the relation between layers, i.e. products essentially comprising layers having different physical properties or products characterised by the interconnection of layers characterised by the connection of layers using an adhesive
• B32B 27/32 - Layered products essentially comprising synthetic resin comprising polyolefins
• B32B 27/34 - Layered products essentially comprising synthetic resin comprising polyamides
• B32B 27/30 - Layered products essentially comprising synthetic resin comprising acrylic resin
• B32B 27/08 - Layered products essentially comprising synthetic resin as the main or only constituent of a layer next to another layer of a specific substance of synthetic resin of a different kind

Abstract

An air freshening device is provided. The device includes a housing and a fan connected with the housing. The device may include a pouch disposed in air-flow communication with the fan. The pouch may be disposed downstream from the fan. The pouch includes a solid-form composition enclosed by an air-permeable substrate. The device may include a screen in air flow communication with the fan. The screen may include a plurality of openings and a semi-solid or solid form composition disposed on at least a portion of the screen. The solid-form composition includes a perfume mixture and a malodor reduction material.

IPC Classes

• A61L 9/12 - Apparatus, e.g. holders, therefor
• A61L 9/04 - Disinfection, sterilisation or deodorisation of air using gaseous or vaporous substances, e.g. ozone using substances evaporated in the air without heating

Abstract

The present invention relates to a method for fabricating absorbent article having multiple layers, and deformed zones of targeted performance, and colored regions, the method comprising the steps of forming discrete features on at least one layer, printing colored regions on at least one layer, integrating multiple layers to form an absorbent assembly, and cutting the absorbent assembly into individual absorbent articles, wherein the steps are carried out continuously.

IPC Classes

• A61F 13/15 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators

Abstract

An absorbent article such as disposable diaper, training pant, and adult incontinence undergarment comprising superabsorbent polymer particles able to absorb and contain body exudates having improved absorption properties and, therefore, reduce leakage, especially at the first gush, i.e. when the article starts to be wetted.

IPC Classes

• A61F 13/53 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium
• A61F 13/15 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators
• A61F 13/49 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the shape specially adapted to be worn around the waist, e.g. diapers, nappies
• A61F 13/532 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having a homogeneous composition through the thickness of the pad inhomogeneous in the plane of the pad
• A61F 13/534 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad
• A61F 13/535 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad inhomogeneous in the plane of the pad, e.g. core absorbent layers being of different sizes
• A61F 13/536 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the absorbing medium having an inhomogeneous composition through the thickness of the pad inhomogeneous in the plane of the pad, e.g. core absorbent layers being of different sizes having discontinuous areas of compression

Abstract

An effervescent chewable dosage form that comprises a pH neutralization agent, an acid, and an effervescent agent. The chewable dosage form can also further comprise simethicone, a sweetener, and a lubricant. The pH neutralization agent can be calcium carbonate, the acid can be citric acid and the effervescent agent can be sodium bicarbonate.

IPC Classes

• A61K 33/10 - Carbonates; Bicarbonates
• A61K 31/194 - Carboxylic acids, e.g. valproic acid having two or more carboxyl groups, e.g. succinic, maleic or phthalic acid
• A61K 31/695 - Silicon compounds
• A61K 47/12 - Carboxylic acids; Salts or anhydrides thereof
• A61K 31/80 - Polymers containing hetero atoms not provided for in groups
• A61K 9/20 - Pills, lozenges or tablets
• A61K 31/7016 - Disaccharides, e.g. lactose, lactulose
• A61K 9/00 - Medicinal preparations characterised by special physical form
• A61K 9/46 - Pills, lozenges or tablets effervescent

Goods & Services

(1) Catamenial products, namely, maxi pads, mini pads and pantiliners.

Goods & Services

(1) Antiperspirants and deodorants for personal use, body wash, and body sprays.

Goods & Services

(1) Tampons

Goods & Services

Catamenial products, namely, maxi pads, mini pads, pantiliners

Goods & Services

Tampons

Goods & Services

an electronic device used to collect data related to personal beauty regimens; computer software for the collection and analysis of personal beauty routines providing news and information in the field of personal beauty; beauty consultation services

Goods & Services

Antiperspirants and deodorants for personal use; Body sprays; Body wash

Goods & Services

(1) Toilet Paper

Goods & Services

(1) Toilet Paper

Goods & Services

(1) Disposable baby diapers

Goods & Services

(1) Disposable baby diapers

Abstract

An apertured polymeric film web and a composite structure web are disclosed. These webs may be utilized as a topsheet in an absorbent article and can provide fluid handling and softness benefits.

IPC Classes

• B32B 3/28 - Layered products essentially comprising a layer with external or internal discontinuities or unevennesses, or a layer of non-planar form; Layered products essentially having particular features of form characterised by a layer with cavities or internal voids characterised by a layer comprising a deformed thin sheet, e.g. corrugated, crumpled
• B32B 3/26 - Layered products essentially comprising a layer with external or internal discontinuities or unevennesses, or a layer of non-planar form; Layered products essentially having particular features of form characterised by a layer with cavities or internal voids
• B32B 5/24 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by the presence of two or more layers which comprise fibres, filaments, granules, or powder, or are foamed or specifically porous one layer being a fibrous or filamentary layer

Abstract

A composition directed to a non-aqueous hair leave-on composition for hair fizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: A composition directed to a non-aqueous hair leave-on composition for hair fizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: Class I having the structure selected from: A composition directed to a non-aqueous hair leave-on composition for hair fizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: Class I having the structure selected from: A composition directed to a non-aqueous hair leave-on composition for hair fizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: Class I having the structure selected from: wherein R′ is —COOY, sulfonic acid, or C═CH—COOY, Y is hydrogen or a metal ion, R1, R2, R3, R4, R5 is hydrogen, methyl, ethyl, propyl, vinyl, allyl, methoxy, ethoxy, hydroxyl, halogen, sulfate, sulfonate, nitro, or —CH═CH—COOR, and wherein the moisture control material is an acidic material and further wherein the moisture control material has a % Protein binding higher than 20 and Molecular Volume lower than 500 and Partition coefficient octanol to water (log P) lower than 3 and hydrogen binding higher than 10 and pKa lower than 5.0; and wherein, the non-aqueous carrier is selected from a group consisting of: a) hydrocarbons b) silicone fluid c) non-hydrocarbons volatile organic solvents or mixtures thereof.

IPC Classes

• A61K 8/368 - Carboxylic acids; Salts or anhydrides thereof with carboxyl groups directly bound to carbon atoms of aromatic rings
• A61Q 5/06 - Preparations for styling the hair, e.g. by temporary shaping or colouring
• A61K 8/86 - Polyethers
• A61K 8/39 - Derivatives containing from 2 to 10 oxyalkylene groups
• A61K 8/89 - Polysiloxanes
• A61Q 5/12 - Preparations containing hair conditioners
• A61K 8/49 - Cosmetics or similar toilet preparations characterised by the composition containing organic compounds containing heterocyclic compounds
• A61K 8/31 - Hydrocarbons
• A61K 8/02 - Cosmetics or similar toilet preparations characterised by special physical form
• A61K 8/81 - Cosmetics or similar toilet preparations characterised by the composition containing organic macromolecular compounds obtained by reactions involving only carbon-to-carbon unsaturated bonds
• A61K 8/42 - Amides
• A61K 8/891 - Polysiloxanes saturated, e.g. dimethicone, phenyl trimethicone, C24-C28 methicone or stearyl dimethicone
• A61K 8/36 - Carboxylic acids; Salts or anhydrides thereof
• A61K 8/34 - Alcohols
• A61K 8/58 - Cosmetics or similar toilet preparations characterised by the composition containing organic compounds containing atoms other than carbon, hydrogen, halogen, oxygen, nitrogen, sulfur or phosphorus
• A61K 8/892 - Polysiloxanes saturated, e.g. dimethicone, phenyl trimethicone, C24-C28 methicone or stearyl dimethicone modified by a hydroxy group, e.g. dimethiconol

Abstract

A cartridge that is releasably connectable with a housing of a microfluidic delivery device is provided. The cartridge has a reservoir for containing a fluid composition and a microfluidic die in fluid communication with the reservoir. The microfluidic die is configured to dispense substantially all of the fluid composition in a horizontal direction or downward direction relative to horizontal. The cartridge also includes an air flow channel disposed below the reservoir. The air flow channel extends from a fan to an air outlet. The air flow channel comprises a first region disposed adjacent to a fan, a second region disposed adjacent to the air outlet, and a third region joining the first and second regions. At least the second region is angled upward to the air outlet, relative to horizontal.

IPC Classes

• B05B 1/26 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means with means for mechanically breaking-up or deflecting the jet after discharge, e.g. with fixed deflectors; Breaking-up the discharged liquid or other fluent material by impinging jets
• B05B 1/24 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means incorporating means for heating the liquid or other fluent material, e.g. electrically
• B05B 17/06 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass operating with special methods using ultrasonic vibrations
• A61L 9/12 - Apparatus, e.g. holders, therefor
• B05B 17/00 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass
• A61L 9/14 - Disinfection, sterilisation or deodorisation of air using sprayed or atomised substances

Abstract

A cartridge configured to be releasably connectable with a housing is provided. The cartridge has a reservoir for containing a fluid composition. The reservoir includes a top surface, a bottom surface vertically opposing the top surface, and a sidewall that joins the top and bottom surfaces. The reservoir also includes a sponge disposed within the reservoir and a microfluidic die disposed adjacent to the sidewall. The fluid composition is gravity fed from the reservoir to the microfluidic die. The microfluidic die is configured to dispense the fluid composition in an upward dispensing direction in opposition to the force of gravity. The microfluidic die may be disposed at an acute angle from the interior of the cartridge and relative to the bottom surface of the reservoir.

IPC Classes

• B05B 1/26 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means with means for mechanically breaking-up or deflecting the jet after discharge, e.g. with fixed deflectors; Breaking-up the discharged liquid or other fluent material by impinging jets
• B05B 1/24 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means incorporating means for heating the liquid or other fluent material, e.g. electrically
• B05B 17/06 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass operating with special methods using ultrasonic vibrations
• A61L 9/12 - Apparatus, e.g. holders, therefor
• B05B 17/00 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass
• A61L 9/14 - Disinfection, sterilisation or deodorisation of air using sprayed or atomised substances

Abstract

A microfluidic delivery device is provided. The microfluidic delivery device includes a housing electrically connectable with a power source. A cartridge is releasably connectable with the housing. The cartridge has a reservoir for containing a fluid composition and microfluidic die in fluid communication with the reservoir. The microfluidic die is configured to dispense substantially all of the fluid composition in an upward direction relative to horizontal. The microfluidic delivery device also includes a fan that is connected with the housing. The fan is configured to generate air flow that converges with and redirects the fluid composition dispensed from the microfluidic die in a first direction to a second direction that is different from the first direction.

IPC Classes

• B05B 1/26 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means with means for mechanically breaking-up or deflecting the jet after discharge, e.g. with fixed deflectors; Breaking-up the discharged liquid or other fluent material by impinging jets
• B05B 1/24 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means incorporating means for heating the liquid or other fluent material, e.g. electrically
• B05B 17/06 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass operating with special methods using ultrasonic vibrations
• A61L 9/12 - Apparatus, e.g. holders, therefor
• B05B 17/00 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass
• A61L 9/14 - Disinfection, sterilisation or deodorisation of air using sprayed or atomised substances

Goods & Services

(1) Disposable baby diapers

Abstract

The present disclosure is related to a wearable article continuous in a longitudinal direction and a transverse direction comprising a main body comprising an outer cover layer at the most garment-facing side and a backsheet attached to the skin-facing surface of the outer cover layer, wherein the main body has a front waist panel, a back waist panel and a crotch panel between the front waist panel and the back waist panel, and wherein the longitudinal length of the outer cover layer is longer than the longitudinal length of the crotch panel and shorter than the longitudinal length of the backsheet; a ring-like belt comprising a front belt and a back belt, wherein each of the front belt and the back belt comprises an inner sheet, an outer sheet and a plurality of elastic strands sandwiched therebetween; a front waist graphic region disposed on the front waist panel where the outer cover layer is absent, and a back waist graphic region disposed on the back waist panel where the outer cover layer is absent, wherein at least one of the front waist graphic region and the back waist graphic region comprises a waist graphic printed on the main body; a transitional region disposed on the front waist panel and the back waist panel where the outer cover layer exists; and a first belt graphic disposed on one or both of the front and back belts, the first belt graphic not being provided by the main body.

IPC Classes

• A61F 13/84 - Accessories, not otherwise provided for, for absorbent pads
• A61F 13/49 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the shape specially adapted to be worn around the waist, e.g. diapers, nappies
• A61F 13/496 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the shape specially adapted to be worn around the waist, e.g. diapers, nappies in the form of pants or briefs

Abstract

A package formed of flexible polymeric film and having a line of weakness to facilitate opening of the package and to demarcate a package base and a package hood is disclosed. The package hood may be configured so as to serve as an effective package reclosure device whereby the package may be used to store the unused supply of articles following opening.

IPC Classes

• A61F 13/551 - Packages or wrapping arrangements for used pads, e.g. for disposal
• B65D 75/06 - Articles or materials wholly enclosed in single sheets or wrapper blanks in sheets or blanks initially folded to form tubes
• B65D 75/58 - Opening or contents-removing devices added or incorporated during package manufacture
• B65D 85/07 -
• B32B 27/08 - Layered products essentially comprising synthetic resin as the main or only constituent of a layer next to another layer of a specific substance of synthetic resin of a different kind
• B32B 27/32 - Layered products essentially comprising synthetic resin comprising polyolefins

Abstract

A volatile composition dispenser is configured to be used in a vehicle. The volatile composition dispenser comprises a housing and a fan positioned at least partially within the housing. The fan is configured to intermittently activate to move a volume of air. The volatile composition dispenser further comprises a controller in electrical communication with the fan and positioned within the housing, and a replaceable unit configured to be attached to the housing and positioned at least partially within the housing.

IPC Classes

• A61L 9/12 - Apparatus, e.g. holders, therefor
• A61L 9/14 - Disinfection, sterilisation or deodorisation of air using sprayed or atomised substances

Abstract

A method of delivering a health care active having the steps of administering to a mammal in need of a health benefit or a treatment for a health condition a personal health care article and consuming the article. The article contains one or more filaments that contain a backbone material, a health care active and optionally aesthetic agents, extensional aids, plasticizers, and crosslinking agents.

IPC Classes

• A61K 9/70 - Web, sheet or filament bases
• D01D 4/02 - Spinnerettes
• D04H 3/16 - Non woven fabrics formed wholly or mainly of yarns or like filamentary material of substantial length characterised by the method of strengthening or consolidating with bonds between thermoplastic yarns or filaments produced by welding with bonds between thermoplastic filaments produced in association with filament formation, e.g. immediately following extrusion
• D04H 1/728 - Non-woven fabrics formed wholly or mainly of staple fibres or like relatively short fibres characterised by the method of forming fleeces or layers, e.g. reorientation of fibres the fibres being randomly arranged by electro-spinning
• D01F 1/10 - Other agents for modifying properties
• A61K 31/192 - Carboxylic acids, e.g. valproic acid having aromatic groups, e.g. sulindac, 2-aryl-propionic acids, ethacrynic acid
• A61K 47/10 - Alcohols; Phenols; Salts thereof
• A61K 9/00 - Medicinal preparations characterised by special physical form
• A61K 31/44 - Non-condensed pyridines; Hydrogenated derivatives thereof
• A61K 47/36 - Polysaccharides; Derivatives thereof

Abstract

The present disclosure is directed to a wearable article comprising a front region, a back region, a crotch region between the front region and the back region, and a main body covering the entire crotch region and at least part of the front region and the back region in the longitudinal direction, wherein at least one of the front region and the back region comprises a first graphic provided by a first material, and a second graphic provided by a second material wherein the first material and the second material differ from each other, and the first and second graphics are not disposed in the main body. The present disclosure is also directed to a wearable article comprising a front region, a back region, a crotch region between the front region and the back region, and a main body covering the entire crotch region and at least part of the front region and the back region in the longitudinal direction, wherein at least one of the front region and the back region comprises a first graphic provided by a first material which is liquid when it is applied to provide the first graphic.

IPC Classes

• A61F 13/49 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the shape specially adapted to be worn around the waist, e.g. diapers, nappies
• A61F 13/84 - Accessories, not otherwise provided for, for absorbent pads
• A61F 13/496 - Absorbent pads, e.g. sanitary towels, swabs or tampons for external or internal application to the body; Supporting or fastening means therefor; Tampon applicators characterised by the shape specially adapted to be worn around the waist, e.g. diapers, nappies in the form of pants or briefs

Abstract

Water-soluble films made from copolymers of butene-diol and vinyl alcohol, wherein the films have improved barrier properties (such as low transmission rates for oxygen and water vapor) as well as good solubility.

IPC Classes

• C08J 5/18 - Manufacture of films or sheets
• C11D 17/04 - Detergent materials or soaps characterised by their shape or physical properties combined with or containing other objects

Abstract

A cosmetic composition is provided, the composition comprising a safe and effective amount of a skin care active with A log P less than −2.0, a safe and effective amount of a fatty alcohol; and a safe and effective amount of a glyceryl ester. The combination of fatty alcohol and glyceryl esters surprisingly enhances penetration of skin care actives with low A log P values into skin.

IPC Classes

• A61K 8/34 - Alcohols
• A61K 8/37 - Esters of carboxylic acids
• A61K 8/64 - Proteins; Peptides; Derivatives or degradation products thereof
• A61K 8/60 - Sugars; Derivatives thereof
• A61K 8/67 - Vitamins
• A61Q 19/08 - Anti-ageing preparations
• A61Q 19/00 - Preparations for care of the skin

Abstract

A microfluidic delivery device and method of dispensing a fluid composition therefrom is provided. The microfluidic delivery device includes a housing electrically connectable with a power source; a cartridge releasably connectable with the housing; and a fan connected with the housing. The cartridge has a reservoir for containing a fluid composition and microfluidic die in fluid communication with the reservoir. The die is configured such that substantially all of the fluid composition exits the microfluidic die in a horizontal direction or downward direction relative to horizontal. The fan is configured to generate air flow that converges with and redirects the fluid composition dispensed from the microfluidic die in an upward direction relative to horizontal.

IPC Classes

• B05B 1/26 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means with means for mechanically breaking-up or deflecting the jet after discharge, e.g. with fixed deflectors; Breaking-up the discharged liquid or other fluent material by impinging jets
• B05B 1/24 - Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means incorporating means for heating the liquid or other fluent material, e.g. electrically
• B05B 17/00 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass
• B05B 17/06 - Apparatus for spraying or atomising liquids or other fluent materials, not covered by any other group of this subclass operating with special methods using ultrasonic vibrations
• A61L 9/12 - Apparatus, e.g. holders, therefor
• A61L 9/14 - Disinfection, sterilisation or deodorisation of air using sprayed or atomised substances

Abstract

Water-soluble films made from copolymers of butene-diol and vinyl alcohol, wherein the films have improved barrier properties (such as low transmission rates for oxygen and water vapor) as well as good solubility.

IPC Classes

• B32B 27/30 - Layered products essentially comprising synthetic resin comprising acrylic resin
• B32B 27/08 - Layered products essentially comprising synthetic resin as the main or only constituent of a layer next to another layer of a specific substance of synthetic resin of a different kind

Abstract

A cleaning article for cleaning a target surface. The cleaning article has strips which present a dynamically changing surface area to the target surface during use. The surface area has also has a bundle of tow fibers which may be oriented transverse to the strips. The tow fibers may extend outwardly from the plane of the strips, allowing particles to migrate towards and be retained near the center of the cleaning article, without interfering with the strips.

IPC Classes

• A47L 13/16 - Cloths; Pads; Sponges
• B32B 3/26 - Layered products essentially comprising a layer with external or internal discontinuities or unevennesses, or a layer of non-planar form; Layered products essentially having particular features of form characterised by a layer with cavities or internal voids
• A47L 13/255 - Plate frames for mops of textile fringes or the like
• A47L 13/44 - Securing scouring-cloths to the brush or like body of the implement

Abstract

A non-aqueous hair leave-on composition directed to an aqueous hair leave-on composition for hair frizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: 1) Class II having the structure selected from: a) A non-aqueous hair leave-on composition directed to an aqueous hair leave-on composition for hair frizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: 1) Class II having the structure selected from: a) A non-aqueous hair leave-on composition directed to an aqueous hair leave-on composition for hair frizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: 1) Class II having the structure selected from: a) wherein R is hydrogen or metal ion, R6 is methyl, ethyl, propyl, alkenyl or phenyl having less than 12 carbon atoms and wherein R7, R8, R9, R10, R11, R12 are hydrogen, methyl, ethyl, propyl, phenyl, hydroxyl, methoxy or ethoxy groups; b) A non-aqueous hair leave-on composition directed to an aqueous hair leave-on composition for hair frizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: 1) Class II having the structure selected from: a) wherein R is hydrogen or metal ion, R6 is methyl, ethyl, propyl, alkenyl or phenyl having less than 12 carbon atoms and wherein R7, R8, R9, R10, R11, R12 are hydrogen, methyl, ethyl, propyl, phenyl, hydroxyl, methoxy or ethoxy groups; b) A non-aqueous hair leave-on composition directed to an aqueous hair leave-on composition for hair frizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: 1) Class II having the structure selected from: a) wherein R is hydrogen or metal ion, R6 is methyl, ethyl, propyl, alkenyl or phenyl having less than 12 carbon atoms and wherein R7, R8, R9, R10, R11, R12 are hydrogen, methyl, ethyl, propyl, phenyl, hydroxyl, methoxy or ethoxy groups; b) an alcohol wherein R13 is an alkyl, alkenyl, straight or branched carbon chains and; and wherein R14 is hydrogen, hydroxyl, alkyl, methyl, ethyl and propyl wherein the structure of such alcohol contains less than 20 total carbon atoms; c) alcohol comprising an unsaturated double bond in the C2 position. d) an alkyl-substituted glycol wherein the structure of such alkyl substituted glycol contains less than 20 carbon atoms; e) a monoalkyl or dialkyl substituted glycerin or mono- or di-esters of glycerin with fatty acids wherein the structure of such monoalkyl- or dialkyl-substituted glycerin or glycerin esters contains less than 20 total carbon atoms; f) A non-aqueous hair leave-on composition directed to an aqueous hair leave-on composition for hair frizz reduction comprising from about 0.15% to about 12.0% of a moisture control material or mixture of moisture control materials wherein the moisture control material is selected from one or more of the following class: 1) Class II having the structure selected from: a) wherein R is hydrogen or metal ion, R6 is methyl, ethyl, propyl, alkenyl or phenyl having less than 12 carbon atoms and wherein R7, R8, R9, R10, R11, R12 are hydrogen, methyl, ethyl, propyl, phenyl, hydroxyl, methoxy or ethoxy groups; b) an alcohol wherein R13 is an alkyl, alkenyl, straight or branched carbon chains and; and wherein R14 is hydrogen, hydroxyl, alkyl, methyl, ethyl and propyl wherein the structure of such alcohol contains less than 20 total carbon atoms; c) alcohol comprising an unsaturated double bond in the C2 position. d) an alkyl-substituted glycol wherein the structure of such alkyl substituted glycol contains less than 20 carbon atoms; e) a monoalkyl or dialkyl substituted glycerin or mono- or di-esters of glycerin with fatty acids wherein the structure of such monoalkyl- or dialkyl-substituted glycerin or glycerin esters contains less than 20 total carbon atoms; f) wherein R15 could be hydrogen, alkyl, alkenyl, phenyl group and wherein the structure of the R13 group contain less than 20 carbon atoms; g) a fatty acid ester containing from 15-40 total carbon atoms and wherein the moisture control material of Class II is weakly to non-acidic and further wherein the moisture control material of Class II has protein binding higher than 10 and molecular volume lower than 1500 and log P higher than 0.5 and pKa of 5 or higher and hydrogen-binding higher than 4; and wherein, the non-aqueous carrier is selected from a group consisting of a) hydrocarbons b) silicone fluid c) non-hydrocarbons volatile organic solvents or mixtures thereof.

IPC Classes

• A61K 8/34 - Alcohols
• A61Q 5/06 - Preparations for styling the hair, e.g. by temporary shaping or colouring
• A61K 8/365 - Hydroxycarboxylic acids; Ketocarboxylic acids
• A61K 8/37 - Esters of carboxylic acids
• A61K 8/36 - Carboxylic acids; Salts or anhydrides thereof
• A61K 8/89 - Polysiloxanes
• A61K 8/92 - Oils, fats or waxes; Derivatives thereof, e.g. hydrogenation products
• A61K 8/58 - Cosmetics or similar toilet preparations characterised by the composition containing organic compounds containing atoms other than carbon, hydrogen, halogen, oxygen, nitrogen, sulfur or phosphorus
• A61K 8/42 - Amides
• A61Q 5/00 - Preparations for care of the hair

Abstract

A head for an oral care implement has at least a first row of tufts comprising a plurality of filaments having free ends and fixed ends being opposite the free ends and being fixed on a mounting surface of the head. The filaments of the at least first row of tufts extend from the mounting surface of the head in different length extensions thereby defining with the filaments' free ends an upper top cleaning surface in the form of a continuous wave-shape. The tufts of the at least first row are inclined with respect to the mounting surface.

IPC Classes

• A46B 9/04 - Position or arrangement of bristles in relation to surface of the brush body, e.g. inclined, in rows, in groups for toothbrushes
• A46B 9/02 - Position or arrangement of bristles in relation to surface of the brush body, e.g. inclined, in rows, in groups
• A46B 15/00 - Other brushes; Brushes with additional arrangements

Abstract

An absorbent article comprising a topsheet, an outer cover, at least one chassis component, and an absorbent core disposed between the topsheet and the outer cover, wherein at least one of the outer cover or chassis component comprises a dual bilaminate comprising two bilaminates combined, wherein each bilaminate comprises at least one nonwoven layer and at least one multilayer film, and wherein the dual bilaminate has at most about 90 grams per square meter basis weight.

IPC Classes

• A61L 15/22 - Bandages, dressings or absorbent pads for physiological fluids such as urine or blood, e.g. sanitary towels, tampons containing macromolecular materials
• B32B 27/12 - Layered products essentially comprising synthetic resin next to a fibrous or filamentary layer
• B32B 27/08 - Layered products essentially comprising synthetic resin as the main or only constituent of a layer next to another layer of a specific substance of synthetic resin of a different kind
• A61L 15/24 - Macromolecular compounds obtained by reactions only involving carbon-to-carbon unsaturated bonds; Derivatives thereof
• A61F 13/514 - Backsheet, i.e. the impermeable cover or layer furthest from the skin
• A61L 15/58 - Adhesives
• B32B 5/02 - Layered products characterised by the non-homogeneity or physical structure of a layer characterised by structural features of a layer comprising fibres or filaments

Goods & Services

Toilet paper

Goods & Services

(1) Fabric Softener; Laundry additive, in the nature of fragrance enhancers.

Goods & Services

(1) Catamenial products, namely, maxi pads and mini pads and tampons.

Goods & Services

Toilet paper

Goods & Services

(1) Air freshening preparations for the atmosphere; freshening preparations for fabrics, upholstery, and carpets. (2) Scented candles; scented wax melts. (3) Dispensing units for air fresheners.

Goods & Services

(1) Skin care preparations