A system and method for recovering high-quality biomethane (RNG) from biogas sources is provided. The gas stream is compressed and liquids are separated from the gas stream at elevated pressure and reduced temperature. The compressing is performed using a plurality of compressors operating in parallel with common control set points. The system and method improve upon conventional practices and yield a biomethane product which meets strict gas pipeline quality specifications. Additionally, the system and method are an improvement to the overall methane recovery efficiency for biogas processing facilities.
F25J 3/02 - Processes or apparatus for separating the constituents of gaseous mixtures involving the use of liquefaction or solidification by rectification, i.e. by continuous interchange of heat and material between a vapour stream and a liquid stream
2.
SYSTEM AND METHOD FOR ONLINE GAS ANALYTICAL PRESSURE-SWING ADSORPTION (PSA) CONTROL FOR LANDFILL OR BIOGAS SEPARATION
A system and method for recovering high-quality biomethane (RNG) from biogas sources are provided. The system and method improve upon conventional practices and yield a biomethane product which meets strict gas pipeline quality specifications. An online sample is captured of a gas stream in near real-time at a pressure swing adsorption vessel, and the online sample is analyzed to detect the presence of one or more targeted products such as CH4, CO2 or N2. The system and method are an improvement to the overall methane recovery efficiency for biogas processing facilities, specifically with regard to PSA control to prevent over or under saturation of the PSA media.
F25J 3/02 - Processes or apparatus for separating the constituents of gaseous mixtures involving the use of liquefaction or solidification by rectification, i.e. by continuous interchange of heat and material between a vapour stream and a liquid stream
3.
System and method for customer and/or container discovery based on GPS drive path analysis for a waste / recycling service vehicle
A system and method for vehicle drive path analysis for a waste/recycling service vehicle are provided. The system and method can enable identifying of the customers and/or container locations for waste and recycling collection routes using vehicle drive path analysis. Some non-limiting properties that can be derived from the analysis include the customer location, address of customers, and/or the locations of containers at the customer location.
B60W 40/10 - Estimation or calculation of driving parameters for road vehicle drive control systems not related to the control of a particular sub-unit related to vehicle motion
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a baler for compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and an internet connection that allows the processor to transmit collected data to a remote database for further analysis.
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a baler for compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and an internet connection that allows the processor to transmit collected data to a remote database for further analysis.
The disclosed method for baling recyclable materials comprising the steps of baling materials; weighing the bale automatically using a digital scale operably connected to the processor; recording the weight of the bale automatically; and printing a label which displays the recorded weight of the bale. Additionally, the method may comprise inputting information and/or automatically recording data, and/or automatically transmitting the data associated with a bale to a remote database.
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a baler for compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and an internet connection that allows the processor to transmit collected data to a remote database for further analysis.
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a baler for compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and an internet connection that allows the processor to transmit collected data to a remote database for further analysis.
The disclosed method for baling recyclable materials comprising the steps of baling materials; weighing the bale automatically using a digital scale operably connected to the processor; recording the weight of the bale automatically; and printing a label which displays the recorded weight of the bale. Additionally, the method may comprise inputting information and/or automatically recording data, and/or automatically transmitting the data associated with a bale to a remote database.
A system and method for remote monitoring and control of landfill and recycling operations provide an intelligent centralized platform for remote, real-time industrial data gathering and process control for management of landfill and recycling operations such as leachate, gas, water and other liquids. The system and method can directly upload machine data (such as liquid volumes, flows, level, equipment runtime, sorter data, status, etc) into a centralized platform. This data can be used for analytics and automation of processes and equipment control.
F23G 7/08 - Methods or apparatus, e.g. incinerators, specially adapted for combustion of specific waste or low grade fuels, e.g. chemicals of waste gases or noxious gases, e.g. exhaust gases using flares, e.g. in stacks
G05B 11/06 - Automatic controllers electric in which the output signal represents a continuous function of the deviation from the desired value, i.e. continuous controllers
G05B 1/00 - Comparing elements, i.e. elements for effecting comparison directly or indirectly between a desired value and existing or anticipated values
A system and method for processing sewage sludge using pyrolysis to eliminate and/or significantly reduce organic chemical compounds, including plastics, and to produce a biochar product that is safe for beneficial uses is provided. The system and method can utilize pyrolysis to treat sewage sludge which dramatically reduces or eliminates regulated and unregulated synthetic organic chemical compounds in the resultant biochar.
A system and method for optimizing waste or recycling routes for one or more service vehicles are disclosed. Service providers can determine optimal sets of routes for a fleet of vehicles to traverse in order to service customers more quickly and efficiently. Unique route shapes can be utilized to minimize route overlapping and route balancing can be utilized to produce routes with more manageable daily workloads.
Systems and methods are provided for asset tracking for waste and recycling containers. A low-cost GPS location asset tracker can be provided for tracking the whereabouts of waste and recycling containers. The asset tracker can include a housing attachable to the waste container, a primary control board, an accelerometer, a battery pack, and a tracking system consisting of a GPS receiver, a GPS antenna, a cellular transceiver, and a cellular antenna traced directly onto the primary control board.
A system and method for facilitating employee health screening using an application on a mobile computing device are provided. The system and method can provide a centralized platform for providing a health screening questionnaire for employees to fill out before visiting an employer's facility. The system and method can perform an employee badge activation/deactivation function based on one or more indicators relating to employee health information.
G16H 10/20 - ICT specially adapted for the handling or processing of patient-related medical or healthcare data for electronic clinical trials or questionnaires
G16H 50/30 - ICT specially adapted for medical diagnosis, medical simulation or medical data mining; ICT specially adapted for detecting, monitoring or modelling epidemics or pandemics for individual health risk assessment
G07C 9/33 - Individual registration on entry or exit not involving the use of a pass in combination with an identity check by means of a password
G16H 10/60 - ICT specially adapted for the handling or processing of patient-related medical or healthcare data for patient-specific data, e.g. for electronic patient records
G16H 80/00 - ICT specially adapted for facilitating communication between medical practitioners or patients, e.g. for collaborative diagnosis, therapy or health monitoring
11.
System and method for oncoming vehicle detection and alerts for a waste collection vehicle
An object detection, tracking and alert system for use in connection with a waste collection vehicle is provided. The system can determine if an external moving object in the surrounding environment of the waste collection vehicle, such as another vehicle or a bicycle, is moving directly towards the waste collection vehicle, and then send one or more alerts to the driver and/or riders on the waste collection vehicle as well as any other waste collection vehicles in the surrounding area.
G08B 25/01 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium
G08B 7/06 - Signalling systems according to more than one of groups ; Personal calling systems according to more than one of groups using electric transmission
G06V 20/58 - Recognition of moving objects or obstacles, e.g. vehicles or pedestrians; Recognition of traffic objects, e.g. traffic signs, traffic lights or roads
12.
System and method for remote monitoring and control of landfill and recycling operations
A system and method for remote monitoring and control of landfill and recycling operations provide an intelligent centralized platform for remote, real-time industrial data gathering and process control for management of landfill and recycling operations such as leachate, gas, water and other liquids. The system and method can directly upload machine data (such as liquid volumes, flows, level, equipment runtime, sorter data, status, etc) into a centralized platform. This data can be used for analytics and automation of processes and equipment control.
F23G 7/08 - Methods or apparatus, e.g. incinerators, specially adapted for combustion of specific waste or low grade fuels, e.g. chemicals of waste gases or noxious gases, e.g. exhaust gases using flares, e.g. in stacks
G05D 7/06 - Control of flow characterised by the use of electric means
G05B 11/06 - Automatic controllers electric in which the output signal represents a continuous function of the deviation from the desired value, i.e. continuous controllers
G05B 1/00 - Comparing elements, i.e. elements for effecting comparison directly or indirectly between a desired value and existing or anticipated values
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a baler for compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and an internet connection that allows the processor to transmit collected data to a remote database for further analysis.
The disclosed method for baling recyclable materials comprising the steps of baling materials; weighing the bale automatically using a digital scale operably connected to the processor; recording the weight of the bale automatically; and printing a label which displays the recorded weight of the bale. Additionally, the method may comprise inputting information and/or automatically recording data, and/or automatically transmitting the data associated with a bale to a remote database.
A system and method for vehicle drive path analysis for a waste/recycling service vehicle are provided. The system and method can enable identifying of the customers and/or container locations for waste and recycling collection routes using vehicle drive path analysis and parcel data analysis. Some non-limiting properties that can be derived from the analysis include the customer location, address of customers, and/or the locations of containers at the customer location.
A system and process for sorting and recovery of recyclable materials, and in particular, sorting and recovery of recyclable materials from mixed waste comprising municipal solid waste in a materials recovery facility or “MRF” are provided. Advanced technology and machinery are integrated into a multi-step system and process that are designed to treat contaminated MSW streams to meet or exceed minimum material quality specifications while also reducing and minimizing headcount of sorter personnel. Because the mix of materials in MSW can be so varied and unpredictable, the system and process are designed to effectively sort and recover desired materials from MSW streams having a variety of material compositions.
A system and method for removing and destroying PFAS from residual waste streams generated during the processing of landfill liquids prior to disposal are provided. The presently disclosed system and method can concentrate PFAS from landfill liquids into a residual waste stream so that the target compounds can be selectively removed for subsequent destruction.
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
H04N 7/18 - Closed-circuit television [CCTV] systems, i.e. systems in which the video signal is not broadcast
B65F 3/00 - Vehicles particularly adapted for collecting refuse
19.
System and method for auditing overages and contamination for a customer waste container by a waste services provider during performance of a waste service activity
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. A system is provided for auditing the fill status of a customer waste container by a waste services provider and right sizing the container during performance of a waste service activity.
An object detection, tracking and alert system for use in connection with a waste collection vehicle is provided. The system can determine if an external moving object in the surrounding environment of the waste collection vehicle, such as another vehicle or a bicycle, is moving directly towards the waste collection vehicle, and then send one or more alerts to the driver and/or riders on the waste collection vehicle as well as any other waste collection vehicles in the surrounding area.
G08B 25/01 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium
G08B 7/06 - Signalling systems according to more than one of groups ; Personal calling systems according to more than one of groups using electric transmission
G06V 20/58 - Recognition of moving objects or obstacles, e.g. vehicles or pedestrians; Recognition of traffic objects, e.g. traffic signs, traffic lights or roads
21.
System and method for remote monitoring and control of landfill and recycling operations
A system and method for remote monitoring and control of landfill and recycling operations provide an intelligent centralized platform for remote, real-time industrial data gathering and process control for management of landfill and recycling operations such as leachate, gas, water and other liquids. The system and method can directly upload machine data (such as liquid volumes, flows, level, equipment runtime, sorter data, status, etc) into a centralized platform. This data can be used for analytics and automation of processes and equipment control.
F23G 7/08 - Methods or apparatus, e.g. incinerators, specially adapted for combustion of specific waste or low grade fuels, e.g. chemicals of waste gases or noxious gases, e.g. exhaust gases using flares, e.g. in stacks
G05B 1/00 - Comparing elements, i.e. elements for effecting comparison directly or indirectly between a desired value and existing or anticipated values
G05B 11/06 - Automatic controllers electric in which the output signal represents a continuous function of the deviation from the desired value, i.e. continuous controllers
System and method for auditing the fill status of a customer waste container by a waste services provider during performance of a waste service activity
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. A system is provided for auditing the fill status of a customer waste container by a waste services provider during performance of a waste service activity.
B65F 3/02 - Vehicles particularly adapted for collecting refuse with means for discharging refuse receptacles thereinto
G06Q 20/14 - Payment architectures specially adapted for billing systems
G06V 20/20 - Scenes; Scene-specific elements in augmented reality scenes
23.
System and method for auditing the fill status of a customer waste container by a waste services provider during performance of a waste service activity
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. A system is provided for auditing the fill status of a customer waste container by a waste services provider during performance of a waste service activity.
A system and method for processing sewage sludge using pyrolysis to eliminate and/or significantly reduce organic chemical compounds, including plastics, and to produce a biochar product that is safe for beneficial uses is provided. The system and method can utilize pyrolysis to treat sewage sludge which dramatically reduces or eliminates regulated and unregulated synthetic organic chemical compounds in the resultant biochar.
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
A system and method including a control/monitoring unit that is either integrated with or exterior-mounted on a waste compactor are provided. The unit can have control functionality, monitoring functionality, or both control and monitoring functionality with respect to the waste compactor. The unit can also include a remote on/off control feature which gives a user the ability to remote start/stop the waste compactor and render it operable/inoperable from another remote location.
B30B 9/30 - Presses specially adapted for particular purposes for baling; Compression boxes therefor
G05B 19/04 - Programme control other than numerical control, i.e. in sequence controllers or logic controllers
H04L 67/125 - Protocols specially adapted for proprietary or special-purpose networking environments, e.g. medical networks, sensor networks, networks in vehicles or remote metering networks involving control of end-device applications over a network
G08C 17/00 - Arrangements for transmitting signals characterised by the use of a wireless electrical link
27.
System and method for optimizing waste / recycling collection and delivery routes for service vehicles
A system and method for optimizing waste or recycling routes for one or more service vehicles are disclosed. Service providers can determine optimal sets of routes for a fleet of vehicles to traverse in order to service customers more quickly and efficiently. Unique route shapes can be utilized to minimize route overlapping and route balancing can be utilized to produce routes with more manageable daily workloads.
G06Q 10/04 - Forecasting or optimisation specially adapted for administrative or management purposes, e.g. linear programming or "cutting stock problem"
A system and method for vehicle drive path analysis for a waste/recycling service vehicle are provided. The system and method can enable identifying of the customers and/or container locations for waste and recycling collection routes using vehicle drive path analysis and parcel data analysis. Some non-limiting properties that can be derived from the analysis include the customer location, address of customers, and/or the locations of containers at the customer location.
The present application pertains to systems and methods of detecting proper and improper material deposited into a receptacle and metrics about same. In some embodiments cameras, processors and artificial intelligence are employed so that notifications can be provided about the materials, their amounts, and various other statistics.
Various illustrative embodiments of a system and process for recovering high-quality biomethane and carbon dioxide product streams from biogas sources and utilizing or sequestering the product streams are provided. The system and process synergistically yield a biomethane product which meets gas pipeline quality specifications and a carbon dioxide product of a quality and form that allows for its transport and sequestration or utilization and reduction in greenhouse gas emissions. The system and process result in improved access to gas pipelines for products, an improvement in the carbon intensity rating of the methane fuel, and improvements in generation of credits related to reductions in emissions of greenhouse gases.
C07C 7/11 - Purification, separation or stabilisation of hydrocarbons; Use of additives by absorption, i.e. purification or separation of gaseous hydrocarbons with the aid of liquids
C07C 7/12 - Purification, separation or stabilisation of hydrocarbons; Use of additives by adsorption, i.e. purification or separation of hydrocarbons with the aid of solids, e.g. with ion-exchangers
C07C 7/00 - Purification, separation or stabilisation of hydrocarbons; Use of additives
B01D 53/04 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by adsorption, e.g. preparative gas chromatography with stationary adsorbents
B01D 53/14 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by absorption
B01D 53/22 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by diffusion
A system and method for remote monitoring and control of landfill and recycling operations provide an intelligent centralized platform for remote, real-time industrial data gathering and process control for management of landfill and recycling operations such as leachate, gas, water and other liquids. The system and method can directly upload machine data (such as liquid volumes, flows, level, equipment runtime, sorter data, status, etc) into a centralized platform. This data can be used for analytics and automation of processes and equipment control.
F23G 7/08 - Methods or apparatus, e.g. incinerators, specially adapted for combustion of specific waste or low grade fuels, e.g. chemicals of waste gases or noxious gases, e.g. exhaust gases using flares, e.g. in stacks
G05B 1/00 - Comparing elements, i.e. elements for effecting comparison directly or indirectly between a desired value and existing or anticipated values
G05B 11/06 - Automatic controllers electric in which the output signal represents a continuous function of the deviation from the desired value, i.e. continuous controllers
A system and process for sorting and recovery of recyclable materials, and in particular, sorting and recovery of recyclable materials from mixed waste comprising municipal solid waste in a materials recovery facility.
B07B 9/00 - Combinations of apparatus for screening or sifting or for separating solids from solids using gas currents; General arrangement of plant, e.g. flow sheets
B03C 1/23 - Magnetic separation acting directly on the substance being separated with material carried by travelling fields, e.g. generated by stationary magnetic coils; Eddy-current separators, e.g. sliding ramp
B07C 5/342 - Sorting according to other particular properties according to optical properties, e.g. colour
B07B 4/08 - Separating solids from solids by subjecting their mixture to gas currents while the mixtures are supported by sieves, screens, or like mechanical elements
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
Various illustrative embodiments of a system and process for recovering high-quality biomethane and carbon dioxide product streams from biogas sources and utilizing or sequestering the product streams are provided. The system and process synergistically yield a biomethane product which meets gas pipeline quality specifications and a carbon dioxide product of a quality and form that allows for its transport and sequestration or utilization and reduction in greenhouse gas emissions. The system and process result in improved access to gas pipelines for products, an improvement in the carbon intensity rating of the methane fuel, and improvements in generation of credits related to reductions in emissions of greenhouse gases.
C07C 7/11 - Purification, separation or stabilisation of hydrocarbons; Use of additives by absorption, i.e. purification or separation of gaseous hydrocarbons with the aid of liquids
C07C 7/12 - Purification, separation or stabilisation of hydrocarbons; Use of additives by adsorption, i.e. purification or separation of hydrocarbons with the aid of solids, e.g. with ion-exchangers
C07C 7/00 - Purification, separation or stabilisation of hydrocarbons; Use of additives
B01D 53/04 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by adsorption, e.g. preparative gas chromatography with stationary adsorbents
B01D 53/14 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by absorption
B01D 53/22 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by diffusion
C10L 5/46 - Solid fuels essentially based on materials of non-mineral origin on sewage, house, or town refuse
B07B 15/00 - Combinations of apparatus for separating solids from solids by dry methods applicable to bulk material, e.g. loose articles fit to be handled like bulk material
B03B 9/06 - General arrangement of separating plant, e.g. flow sheets specially adapted for refuse
C10L 5/40 - Solid fuels essentially based on materials of non-mineral origin
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a baler for compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and an internet connection that allows the processor to transmit collected data to a remote database for further analysis.
The disclosed method for baling recyclable materials comprising the steps of baling materials; weighing the bale automatically using a digital scale operably connected to the processor; recording the weight of the bale automatically; and printing a label which displays the recorded weight of the bale. Additionally, the method may comprise inputting information and/or automatically recording data, and/or automatically transmitting the data associated with a bale to a remote database.
Various illustrative embodiments of a system and process for recovering high-quality biomethane and carbon dioxide product streams from biogas sources and utilizing or sequestering the product streams are provided. The system and process synergistically yield a biomethane product which meets gas pipeline quality specifications and a carbon dioxide product of a quality and form that allows for its transport and sequestration or utilization and reduction in greenhouse gas emissions. The system and process result in improved access to gas pipelines for products, an improvement in the carbon intensity rating of the methane fuel, and improvements in generation of credits related to reductions in emissions of greenhouse gases.
C07C 7/00 - Purification, separation or stabilisation of hydrocarbons; Use of additives
C07C 7/11 - Purification, separation or stabilisation of hydrocarbons; Use of additives by absorption, i.e. purification or separation of gaseous hydrocarbons with the aid of liquids
C10L 1/04 - Liquid carbonaceous fuels essentially based on blends of hydrocarbons
C07C 7/12 - Purification, separation or stabilisation of hydrocarbons; Use of additives by adsorption, i.e. purification or separation of hydrocarbons with the aid of solids, e.g. with ion-exchangers
B01D 53/04 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by adsorption, e.g. preparative gas chromatography with stationary adsorbents
B01D 53/22 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by diffusion
B01D 53/14 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by absorption
A system and process for sorting and recovery of recyclable materials, and in particular, sorting and recovery of recyclable materials from mixed waste comprising municipal solid waste in a materials recovery facility.
B07B 9/00 - Combinations of apparatus for screening or sifting or for separating solids from solids using gas currents; General arrangement of plant, e.g. flow sheets
B03C 1/23 - Magnetic separation acting directly on the substance being separated with material carried by travelling fields, e.g. generated by stationary magnetic coils; Eddy-current separators, e.g. sliding ramp
B07C 5/342 - Sorting according to other particular properties according to optical properties, e.g. colour
B07B 4/08 - Separating solids from solids by subjecting their mixture to gas currents while the mixtures are supported by sieves, screens, or like mechanical elements
42.
System and method for managing service and non-service related activities associated with a waste collection, disposal and/or recycling vehicle
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
A system and process for sorting and recovery of recyclable materials, and in particular, sorting and recovery of recyclable materials from mixed waste comprising municipal solid waste in a materials recovery facility.
B07B 9/00 - Combinations of apparatus for screening or sifting or for separating solids from solids using gas currents; General arrangement of plant, e.g. flow sheets
B03C 1/23 - Magnetic separation acting directly on the substance being separated with material carried by travelling fields, e.g. generated by stationary magnetic coils; Eddy-current separators, e.g. sliding ramp
B07C 5/342 - Sorting according to other particular properties according to optical properties, e.g. colour
B07B 4/08 - Separating solids from solids by subjecting their mixture to gas currents while the mixtures are supported by sieves, screens, or like mechanical elements
46.
System and method for managing service and non-service related activities associated with a waste collection, disposal and/or recycling vehicle
Systems and methods are provided for using video/still images captured by continuously recording optical sensors mounted on waste collection vehicles used in the waste collection, disposal and recycling industry for operational and customer service related purposes. Optical sensors are integrated into the in-cab monitor as well as the onboard computer, digital video recorder and other external devices.
Disclosed embodiments of a system for managing waste materials and tracking the portion of received recyclable materials that are recycled and/or monetized. The disclosed system may include smart balers; imaging devices, such as cameras or video cameras; barcode, QR, RFID or other near field scanners; and one or more processors operably connected to these devices. A processor is typically configured to determine what portion of incoming materials may be recyclable and/or what portion of those incoming recyclable materials are recycled and/or monetized. The processor may also be configured to generate and visualize reports relating to the waste management process including generating a single index number of the capture percentage rate.
G07F 7/06 - Mechanisms actuated by objects other than coins to free or to actuate vending, hiring, coin or paper currency dispensing or refunding apparatus by returnable containers, e.g. bottles
B29B 17/00 - Recovery of plastics or other constituents of waste material containing plastics
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a finger baler for continuous compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and internet connection that allows the processor to transmit collected data to a remote database for further analysis.
The disclosed method for baling recyclable materials comprising the steps of continuously adding and compressing materials; forming a completed bale; weighing the bale automatically using a digital scale operably connected to the processor; recording the bale weight automatically; and printing a label. Additionally, the method may comprise inputting information and/or automatically recording data, and/or automatically transmitting the data associated with a bale to a remote database.
Disclosed are embodiments of a system and method for baling recyclable materials and managing the baling of recyclable materials. The apparatus for baling includes a baler for compressing and baling recyclable materials, a scale, label printer, and a processor. Certain embodiments further comprise at least one digital camera, RFID dispenser, and an internet connection that allows the processor to transmit collected data to a remote database for further analysis.
The disclosed method for baling recyclable materials comprising the steps of baling materials; weighing the bale automatically using a digital scale operably connected to the processor; recording the weight of the bale automatically; and printing a label which displays the recorded weight of the bale. Additionally, the method may comprise inputting information and/or automatically recording data, and/or automatically transmitting the data associated with a bale to a remote database.
Disclosed are embodiments that relate to apparatus for compacting materials. The apparatus comprising a mechanical linkage designed to be mounted within the interior of an existing waste receptacle, a compression surface operably connected to the mechanical linkage, and a motor operably connected to the mechanical linkage, wherein the motor is capable of extending and retracting the mechanical linkage, thereby lowering and raising the compression plate. Some embodiments will take advantage of integrated sensors and processors in order to capture and analyze large amounts of data related to the compactor operations. This data may lead to refinements and greater efficiency in the waste disposal processes.
An organic waste processing system and method for producing an organic waste slurry for the production of bio-gas, transportation fuels or chemical products, wherein the system and method produces an organic waste slurry having substantially ten to fifteen percent in total solids and high levels of COD.
2 carbon carrying between about 5% and 15% sulfur, basis carbon weight, reacted with between about 0.02 to about 1% by weight iodine, basis sulfur weight. The corresponding method for scouring released vaporous Hg housed within a container includes providing a source of carbon carrying between about 5% and 15% sulfur, basis carbon weight, reacted with between about 0.02 to about 1% by weight iodine, basis sulfur weight; and placing within the container a substrate bearing an effective amount of the iodine reacted sulfur for scouring Hg released within the container.
B01D 53/64 - Heavy metals or compounds thereof, e.g. mercury
B65D 85/42 - Containers, packaging elements or packages, specially adapted for particular articles or materials for articles particularly sensitive to damage by shock or pressure for electronic valves or tubes
B01D 53/04 - Separation of gases or vapours; Recovering vapours of volatile solvents from gases; Chemical or biological purification of waste gases, e.g. engine exhaust gases, smoke, fumes, flue gases or aerosols by adsorption, e.g. preparative gas chromatography with stationary adsorbents
B01D 53/82 - Solid phase processes with stationary reactants
2 carbon carrying between about 5% and 15% sulfur, basis carbon weight, reacted with between about 0.02 to about 1% by weight iodine, basis sulfur weight. The corresponding method for scouring released vaporous Hg housed within a container includes providing a source of carbon carrying between about 5% and 15% sulfur, basis carbon weight, reacted with between about 0.02 to about 1% by weight iodine, basis sulfur weight; and placing within the container a substrate bearing an effective amount of the iodine reacted sulfur for scouring Hg released within the container.
An organic waste processing system and method for producing a slurry for the production of bio-gas, transportation fuels and chemical products, and a residual solid. The system includes (i) a hopper configured to receive sorted organic waste having contaminants from one or more sources, (ii) a separator system in communication with the hopper and configured to receive the sorted organic waste from the hopper and to remove at least a portion of the contaminants in the sorted organic waste, (iii) a complimentary liquid tank in communication with the separator system and containing complimentary liquids, (iv) a wash water liquid tank in communication with the separator system and containing wash water, (v) a product tank in communication with the separator system and configured to receive the sorted organic waste from the separator system, (vi) a make-up product tank in communication with the separator system and configured to receive the sorted organic waste from the separator system having low COD, (vii) a anaerobic digester system configured to receive the sorted organic waste from the product tank, and (viii) a programmable logic controller.
B65D 85/42 - Containers, packaging elements or packages, specially adapted for particular articles or materials for articles particularly sensitive to damage by shock or pressure for electronic valves or tubes
A system and method are provided for scheduling the emptying or replacement of a waste container based on the fullness of the container or the usage of the container. These factors may be considered to determine when the waste container will become completely full. Additionally, the system and method may consider the customer preferences or the limitations of the waste hauler. All of these factors may be considered to determine an optimal time for the waste container to be emptied or replaced. These factors are also considered to determine when to accomplish the scheduling (i.e. when to notify the waste hauler that the waste container should be emptied or replaced at a given time).
This invention is directed to systems including one or more trenches or wells that include one or more perforated pipes through which a gas, such as air, can be injected into the vadose zone of ground located beyond a methaneogenic source to create a positive-pressure gas curtain and/or aerobic conditions in the vadose zone that inhibits migration of and/or facilitate the remediation of mobile volatile organic compounds that are capable of contaminating groundwater surrounding the methaneogenic source.
An apparatus, a method, and a system are provided for measuring and reporting the weight of bales in a baler. The weight may be determined by a variety of methods. The system may display or store the weight of the bale in the baler. The system may schedule the removal of bales or track the number of bales produced, weight of the bales produced, or value of the bales produced. The system may determine an appropriate time to accomplish the scheduling of the removal of the bales.
B65D 85/42 - Containers, packaging elements or packages, specially adapted for particular articles or materials for articles particularly sensitive to damage by shock or pressure for electronic valves or tubes
patents
