The content output device includes an information acquisition unit, a content generation unit and an output unit. The information acquisition unit acquires driving state information which is information related to a current driving state of a vehicle. The content generation unit acquires one or more content elements corresponding to a trigger condition, from among a plurality of content elements combinable with each other, when the driving state information satisfies the trigger condition, and generates an output content using the acquired content elements. The output unit outputs the output content.
An actuator includes a mirror and an electromagnet. The mirror is provided with a permanent magnet and is capable of oscillating about a first axis and a second axis as oscillation axes with respect to a reference plane. The second axis is non-parallel to the first axis. The electromagnet has a yoke and a coil and applies a magnetic flux to the permanent magnet. Both ends of the yoke face each other at least partially across a gap. When viewed from a direction perpendicular to the reference plane, a center Cg of the gap does not overlap a center Cm of the permanent magnet. A current I1 for causing the mirror to oscillate with respect to the first axis and a current I2 for causing the mirror to oscillate with respect to the second axis are superimposed and flowed through the coil.
G02B 26/08 - Optical devices or arrangements for the control of light using movable or deformable optical elements for controlling the direction of light
A permanent magnet (21) is provided to the mirror (20). The mirror (20) can oscillate with respect to a reference plane (101), by using a first axis (201) and a second axis (202) not being parallel to the first axis (201) as oscillation axes. The first electromagnet (30) causes the mirror (20) to oscillate with respect to the first axis (201). The second electromagnet (40) causes the mirror (20) to oscillate with respect to the second axis (202). Then, at least either (A) or (B) indicated below is established in the actuator (10). (A) The first electromagnet (30) is not line-symmetric with respect to the first axis (201) as viewed from a direction perpendicular to the reference plane (101). (B) The second electromagnet (40) is not line-symmetric with respect to the second axis (202) as viewed from a direction perpendicular to the reference plane (101).
G02B 26/08 - Optical devices or arrangements for the control of light using movable or deformable optical elements for controlling the direction of light
This information processing device (1) comprises a speed information acquisition unit (50), a calculation unit (20), and a fatigue evaluation unit (30). The speed information acquisition unit (50) repeatedly acquires speed information regarding the speed of a moving body. The calculation unit (20) calculates statistical information about the speed information in a prescribed section, using the speed information. The fatigue evaluation unit (30) evaluates the fatigue of a driver of the moving body, using the statistical information.
An on-vehicle machine 1 or a server device 5 is an information processing apparatus used in a system that intermediates communication between a driver of a target vehicle which is a movable body and a user of an out-of-vehicle terminal 2 which is present outside the target vehicle, and comprises a calculation means, a detection means, and a display control means. The calculation means calculates a workload value which is an index value relating to the degree of driving load (workload) of the driver of the target vehicle. The detection means detects a cause of increasing the driving load when the workload value indicates that the driving load is higher than a prescribed reference. The display control means displays, on the out-of-vehicle terminal 2, information relating to the cause of increasing the driving load.
H04M 11/00 - Telephonic communication systems specially adapted for combination with other electrical systems
B60W 40/08 - Estimation or calculation of driving parameters for road vehicle drive control systems not related to the control of a particular sub-unit related to drivers or passengers
6.
ABNORMALITY DETECTION DEVICE, ABNORMALITY DETECTION METHOD, AND PROGRAM
A measurement device (10) includes a light source (110), a control unit (120), a light receiving unit (130), and a data generation unit (140). The control unit (120) repeatedly performs scanning with light from the light source (110) in a predetermined range. The light receiving unit (130) detects reflected light of the light of scanning by the control unit (120). The data generation unit (140) computes a distance to a reflection point of reflected light by using the reflected light. An abnormality detection unit (210) acquires measurement data generated by the data generation unit (140). Further, the abnormality detection unit (210) determines presence or absence of an abnormality of the control unit (120) by using at least one of a distance to the reflection point and intensity of the reflected light included in each of a plurality of pieces of the measurement data.
This information processing device (1) comprises an output control unit (10), an input unit (20), a determination unit (30), and a mode setting unit (40). The output control unit (10) outputs question information relating to whether a co-occupant is present in a moving body. The input unit (20) receives input of response information relating to a response by an occupant to the question information. The determination unit (30) determines, using the response information, whether a co-occupant is present in the moving body. The mode setting unit (40) determines, using the result of the determination by the determination unit (30), whether to apply a first mode for operating as a voice recognition device upon detecting a first keyword, or a second mode for operating as a voice recognition device even when no first keyword is detected.
A driving assistance device includes a memory and a processor. The processor acquires travel information including acceleration of a moving body. The processor presents, to the moving body, information regarding cargo collapse on the moving body that is specified on the basis of a distribution of the acceleration of the moving body in multiple axes on the basis of the travel information.
The present invention prevents operations based on settings or the like from being complicated even when different types of equipment are standardized. A server device 20 uses a recorder device 10 to acquire an installation image captured by an imaging unit 11 mounted to a cabin 104 of construction equipment, and uses a processing unit 22 to extract a cabin 104 feature point image from the installation image. The type of construction equipment is then determined on the basis of the feature point image and an image pool 23a prepared in advance by the processing unit 22 and a behavior inference library for the recorder device 10 corresponding to the determined type is identified.
Vibration based on a sound is generated even in a case where the sound does not have a component of a low-frequency region. Envelope information regarding an envelope of a sound signal is derived, a frequency modulation and an amplitude modulation based on the envelope information are performed on a basic signal of waves having constant frequency and constant amplitude, and a vibration signal for vibrating a vibration generation device is generated.
The purpose of the present invention is to provide an information processing device, an information processing method, a program, and a recording medium with which, on the basis of a user's movement information, determination is made as to whether the user is in a situation in which the user is likely to speak a wake word, so as to enable easier detection of the wake word even if the user is moving. This invention comprises: a movement situation detection unit 120 for determining, on the basis of a user's movement information, whether the user is in a situation in which the user is likely to speak the wake word; and a wake word detection unit 140 for making it easier to detect the wake word by modifying a threshold value for detecting the wake word if the movement situation detection unit 120 has determined that the user is in a situation in which the user is likely to speak the wake word, and detecting the wake word from audio uttered by the user.
An acquisition unit (131) acquires data related to vehicle or road conditions. A situation estimation unit (132) estimates a driving situation on the basis of the data related to vehicle or road conditions acquired by the acquisition unit (131). An attention degree calculation unit (133) calculates an index indicating the degree to which an operator is attentive to driving on the basis of the driving situation estimated by the situation estimation unit (132). A monotony degree calculation unit (134) calculates an index indicating the degree of monotony in driving on the basis of the driving situation estimated by the situation estimation unit (132). A load estimation unit (136) estimates a driving load on the basis of the index indicating the degree to which the operator is attentive to driving calculated by the attention degree calculation unit (133) and the index indicating the degree of monotony in driving calculated by the monotony degree calculation unit (134).
A terminal device used by a user of a vehicle includes a first input unit configured to receive a first user ID inputted by the user, a first transmission unit configured to transmit the first user ID to a second server device operated by a service providing company, a receiving unit configured to receive service information from the second server device, the service information including provision information, the provision information indicating information to be provided from a first server device to the second server device from among information transmitted from a terminal device of the vehicle to the first server device, a storage unit configured to store the received service information, a second input unit configured to receive a use start instruction of the vehicle inputted by the user, and a second transmission unit configured to transmit the service information to the terminal device of the vehicle.
G07C 5/00 - Registering or indicating the working of vehicles
H04L 67/10 - Protocols in which an application is distributed across nodes in the network
H04L 67/12 - Protocols specially adapted for proprietary or special-purpose networking environments, e.g. medical networks, sensor networks, networks in vehicles or remote metering networks
A light-emitting device includes a substrate, a plurality of light-emitting units located on the substrate, each of the plurality of light-emitting units comprising a first electrode, a second electrode, and an organic layer located between the first electrode and the second electrode, a plurality of first terminals, each of the plurality of first terminals being electrically connected to a plurality of the first electrodes, a plurality of second terminals, each of the plurality of second terminals being electrically connected to a plurality of second electrodes, a sealing layer sealing the light-emitting unit, the sealing layer not covering the plurality of first terminals or the plurality of second terminals, and a cover layer located over the sealing layer.
A sealing unit (200) includes a substrate unit (210) and a protruding portion (220). The protruding portion (220) protrudes from the substrate unit (210) toward a substrate (100). Further, when viewed from a thickness direction of the substrate unit (210), the protruding portion (220) has a frame shape. An outer wall (226) of the protruding portion (220) includes a recessed portion (222). The recessed portion (222) of the outer wall (226) of the protruding portion (220) is located at a corner of the frame shape of the protruding portion (220). In addition, the recessed portion (222) of the outer wall (226) of the protruding portion (220) is recessed toward an inner wall (228) of the protruding portion (220) relative to an outer edge (216) of the substrate unit (210).
An information processing device (100a) of the present disclosure is provided with: an acquisition unit (132) that acquires content information to be output into a moving body; and an output control unit (133a) that causes the content information to be output when the type of the content information satisfies an output condition corresponding to the current condition of a passenger of the moving body. Furthermore, if the output condition was unsatisfied and the content information could not be output, the output control unit (133a) causes interrogation information to be output for obtaining permission from the passenger of the moving body to output the content information, within an allowable scope where output of the content information is allowed.
A route in which a stop position of a delivery vehicle is taken into account is created. When creating a route, for each of one or more delivery destinations, a travel trajectory of a delivery person and a travel trajectory of a delivery vehicle in one or more deliveries made to the delivery destination is acquired, and, for each of the one or more delivery destinations, a transit point for the delivery destination is determined based on a travel trajectory of a delivery person and a travel trajectory of a delivery vehicle in each of one or more deliveries made to the delivery destination.
09 - Scientific and electric apparatus and instruments
42 - Scientific, technological and industrial services, research and design
Goods & Services
Dashboard software; mobile application software for in-car entertainment [ICE] systems; mobile application software for controlling touchscreen displays, in-car entertainment [ICE] systems, car stereos, and audio speaker systems in vehicles; mobile application software for controlling car audio; car stereos; audio speaker systems in vehicles; in-car entertainment [ICE] systems. Providing temporary use of online, non-downloadable mobile application software for use in relation to in-car entertainment [ICE] systems, dashboard software, touchscreen displays, car stereos, and audio speaker systems in vehicles; Providing temporary use of online non-downloadable mobile application software for controlling car audio.
09 - Scientific and electric apparatus and instruments
Goods & Services
Scientific, electronically operated nautical, surveying, electric, photographic, cinematographic, optical, weighing, measuring, signaling, checking (supervision), teaching apparatus and instruments; Apparatus for recording, transmission, processing and reproduction of sound, images or data; Video disc players and video disc recorders; tape players and tape recorders; portable audio players; portable media players; digital audio players; digital media players; record players; optical disc error checking apparatus; optical disc drives and optical disc auto changers; optical disc players and recorders for audio, video and computer data; sound recording discs; video discs; compact discs; audio tapes and video tapes; magnetic tapes; optical discs and magnetic discs; DVDs; CDs; DVD players; DVD recorders; CD players; CD recorders; CD-ROM discs; CD-ROM disc drives and CD-ROM disc auto changers; radio and tuners; audio receivers and video receivers; television apparatus; television monitors; loudspeakers; audio speakers; speakers for mobile phones; speaker systems; earphones; headphones; microphones and microphone mixers; (sound) mixers; amplifiers; phonograph record turntables; cleaning apparatus for sound recording discs; aerials; jukeboxes; telephone apparatus; smartphones; stands specially designed for holding mobile phones and portable and handheld digital electronic devices; computers; tablet PCs; computer peripheral devices; computer keyboards; computer memories; printers for use with computers; integrated circuits; semi-conductors; cable television converters; electronic docking stations; connectors; electric cables; batteries; remote controllers; bar code readers; audio visual teaching apparatus; navigational apparatus and instruments; cabinets for loudspeakers; audio timers; Racks adapted to house audio apparatus; Diaphragms [acoustics]; hard disc drive recorders; organic electroluminescent displays; home theatre systems; electric and/or electronic equipment for use in disc jockey performance, namely, audio mixing consoles, turntables, portable multimedia players[PMPs], sound samplers and computer hardware for music production, DVD players, DVD recorders, video disc players and video disc recorders, (sound) mixers, audio speakers, phonograph record turntables, amplifiers; electric and/or electronic equipment for use in disc jockey performance, namely, sound effectors, video effectors, electronic switches for audio and video signals, headphones, apparatus for recording, transmission, processing and reproduction sound, images or data, record players, audio receivers and video receivers; electric and/or electronic equipment for use in disc jockey performance, namely, speaker systems, microphones and microphone mixers, earphones, disc players and disc recorders, hard disc drive recorders, optical disc players and recorders for audio, video and computer data, monitors; sound processing apparatus, namely sound effectors; video processing apparatus, namely video effectors; electronic switches for audio and video signals; car audio systems; car video systems; In-vehicle cameras; video cameras; digital cameras; electronic displays; electronic displays on which letters or drawings written up for education or meeting; video conference systems; Vehicle location detection system comprising primarily of display monitors, computers, image sensors, and video cameras; sensors; Height measuring instruments; Measuring apparatus, namely, laser distance meters; Distance measuring apparatus; Laser measuring systems; dashboard cameras; downloadable application software; GPS navigation devices; sensors for vehicles, namely electronic sensors for measuring rate of motion of vehicles; vehicle sensors, namely, parking sensors and impact detecting sensors for vehicles; parts and fittings for all of the aforementioned goods; computer software; computer operating programs; computer game programs; computer software for playing virtual disc jockey on PCs; computer software used for generating, reproducing, effecting, modifying, transmitting and/or processing sound, music or video data; computer software for retrieving audio and video data stored on server machines on home network; software for providing digital maps; cloud servers; cloud computing software; telecommunication apparatus with artificial intelligence; voice recognition devices; display apparatus; Webcams; data carriers; in-car entertainment [ICE] systems.
22.
SELF-POSITION ESTIMATION DEVICE, SELF-POSITION ESTIMATION METHOD, PROGRAM, AND RECORDING MEDIUM
A self-position estimation device is mounted on a mobile body and acquires a predicted position of the mobile body. Additionally, the self-position estimation device calculates a difference value between a predicted position of an end point of a lane division line that is obtained based on information on the end point of the lane division line acquired from map information and a measured position of the end point of the lane division line measured in such a manner that a measurement unit mounted on the mobile body performs scanning with a light in a predetermined direction. The self-position estimation device estimates a self-position of the mobile body by correcting the predicted position with a value obtained by multiplying the difference value by a coefficient. Further, the self-position estimation device corrects the coefficient based on an interval of scanning positions of the measurement unit at a position where the end point of the lane division line is detected.
G01S 7/48 - RADIO DIRECTION-FINDING; RADIO NAVIGATION; DETERMINING DISTANCE OR VELOCITY BY USE OF RADIO WAVES; LOCATING OR PRESENCE-DETECTING BY USE OF THE REFLECTION OR RERADIATION OF RADIO WAVES; ANALOGOUS ARRANGEMENTS USING OTHER WAVES - Details of systems according to groups , , of systems according to group
G01S 17/931 - Lidar systems, specially adapted for specific applications for anti-collision purposes of land vehicles
G01S 17/06 - Systems determining position data of a target
23.
INFORMATION PROCESSING DEVICE, CONTROL METHOD, PROGRAM, AND STORAGE MEDIUM
A controller 13 of an in-vehicle device 1 is configured to acquire a DR position XDR that is a first candidate position of a vehicle. Further, the controllers 13 is configured to acquire an NDT position XNDT that is a second candidate position of the vehicle, the NDT position XNDT being determined based on NDT scan matching that is a matching between point cloud data and voxel data VD that is map data, the point cloud data being outputted by a lidar 2 that is the external sensor provided in the vehicle. Furthermore, the controllers 13 is configured to calculate a reliability value NRV representing the reliability of the NDT scan matching. The controllers 13 is configured to determine the estimated own vehicle position X{circumflex over ( )} based on the DR position XDR, the NDT position XNDT, and the reliability value NRV.
An information providing device (1) comprises a terminal information acquiring unit (10), a provided information identifying unit (20), and an output controlling unit (30). The terminal information acquiring unit (10) acquires first terminal information related to a first terminal (3) of an operator of a moving body, and second terminal information related to a second terminal (4) of a passenger. The provided information identifying unit (20) identifies first provided information to be provided to the operator using first person information of the operator stored in association with the first terminal information, and identifies second provided information to be provided to the passenger using second person information of the passenger stored in association with the second terminal information. The output controlling unit (30) has a function for causing the first provided information to be output from a moving body-side device provided inside the moving body, and a function for causing the second provided information to be output from the second terminal.
An information providing device (1) comprises a position information acquisition unit (40), a terminal information acquisition unit (10), a provision information identifying unit (20), and an output control unit (30). The position information acquisition unit (40) acquires moving object position information indicating the position of a moving object. The terminal information acquisition unit (10) acquires first terminal information relating to a first terminal of a user outside the moving object. The provision information identifying unit (20) uses the moving object position information and personal information for the user stored in association with the first terminal information to identify provision information that is to be provided to the user. The output control unit (30) causes the first terminal to output the provision information.
A speaker includes: a vibrating body including a diaphragm and an edge; a coil directly or indirectly attached to the diaphragm; a pair of lead wires electrically connected to the coil; a yoke; a frame which supports the diaphragm via the edge and in which a magnetic circuit is housed; and an inner terminal to which the lead wire is connected. A passage through which the lead wire passes is disposed between the coil and the inner terminal.
H04R 1/00 - LOUDSPEAKERS, MICROPHONES, GRAMOPHONE PICK-UPS OR LIKE ACOUSTIC ELECTROMECHANICAL TRANSDUCERS; DEAF-AID SETS; PUBLIC ADDRESS SYSTEMS - Details of transducers
H04R 7/18 - Mounting or tensioning of diaphragms or cones at the periphery
Provided is a voice recognition device 1 comprising a voice input unit (10), a voice recognition unit (20), a determination unit (30), a processing execution unit (40), and an adjustment unit (50). The voice input unit (10) receives input of voice of an occupant in a vehicle. The voice recognition unit (20) recognizes the voice input to the voice input unit (10) as first voice information. The determination unit (30) determines whether the similarity between the first voice information and second voice information stored in advance satisfies a predetermined criterion. The processing execution unit (40) executes a predetermined process when the similarity satisfies the predetermined criterion. The adjustment unit (50) adjusts a similarity determination rule and/or the predetermined criterion according to the input from the occupant.
An information providing device comprising: a situation detection unit that detects a current situation of a moving object or an occupant of the moving object; a call originating unit that originates a call to a first contact on the basis of the situation detected by the situation detection unit; and a providing unit that provides a second contact with telephone call information generated on the basis of voices of the telephone call between the occupant and the first contact as a result of the originated call or access information for access to this telephone call information.
G08B 25/08 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using communication transmission lines
G08B 25/04 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using a single signalling line, e.g. in a closed loop
G08B 25/10 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using wireless transmission systems
H04M 11/04 - Telephonic communication systems specially adapted for combination with other electrical systems with alarm systems, e.g. fire, police or burglar alarm systems
29.
Digital audio player with tuner and amplifier for an automobile
A communication control terminal includes: a communication unit configured to perform communication with another device; an acquisition configured to acquire a value of acceleration; a determination unit configured to determine that the communication control terminal is in a state of being brought into a vehicle, based on the value of acceleration; and a communication control unit configured to restrict use of the communication by the communication unit when the determination unit determines that the communication control terminal is not in the state of being brought into a vehicle.
H04W 48/04 - Access restriction performed under specific conditions based on user or terminal location or mobility data, e.g. moving direction or speed
H04M 1/72463 - User interfaces specially adapted for cordless or mobile telephones with means for adapting the functionality of the device according to specific conditions to restrict the functionality of the device
A light-emitting device (20) includes a light-emitting region (140). The light-emitting region (140) includes a plurality of light-emitting units (142) and a plurality of light-transmitting units (144), and each of the plurality of light-transmitting units (144) is located between the light-emitting elements (142) adjacent to each other. The light-emitting region (140) is located on a side of one surface (outer surface (202)) of a base material (200) having light-transmitting properties and has an inclination with respect to the one surface (outer surface (202)). The base material (200) is rear glass of an automobile. The base material (200) partitions a region outside a mobile object (region (RG1)) from a region inside the mobile object (region (RG2)).
An information presentation device includes an outward trip/return trip determination unit determining whether or not a current traveling situation corresponds to an outward trip based on a driving history, and a display device presenting information regarding a facility at which stopping-off on a return trip is predicted based on the driving history in a case where the current traveling situation is determined to be the outward trip by the outward trip/return trip determination unit.
A light-emitting device (10) includes a substrate (100), a first electrode (110), an organic layer (120), a plurality of first metal-containing layers (132), a metal compound-containing layer (134), and a second metal-containing layer (136). The first electrode (110) is located over the substrate (100), and has a light transmitting property. The organic layer (120) is located over the first electrode (110). The plurality of first metal-containing layers (132) are located over the organic layer (120), and has a light shielding property. The metal compound-containing layer (134) covers the plurality of first metal-containing layers (132), and has a light transmitting property. The second metal-containing layer (136) covers the metal compound-containing layer (134), and has a light transmitting property.
An information processing device (100) according to the present application has: an acquisition unit (132) that acquires region information indicating a living area of a user on a map; an identification unit (137) that identifies a ground feature in which the plot thereof is partially included in the living area; and an update unit (138) that updates the living area on the basis of the living area and a ground region indicating a range of the ground occupied by the feature identified by the identification unit (137).
The controller 13 of the in-vehicle device 1 acquires point cloud data outputted by a lidar 2. Then, the controller 13 generates processed point cloud data obtained by down-sampling the point cloud data. The controller 13 matches the processed point cloud data with voxel data VD which represents a position of an object with respect to each voxel that is a unit area and thereby associates a measurement point of the processed point cloud data with the each voxel. Then, the controller 13 changes the size of the subsequent down-sampling based on the associated measurement points number Nc which is the number of measurement points associated with the each voxel among the measurement points of the processed point cloud data.
An information processing apparatus includes an identifying unit that identifies a place where a driver of a vehicle is under a duty of care; an obtaining unit that obtains travel information on the vehicle at the place identified by the identifying unit; and an accumulating unit—that accumulates the travel information on the vehicle, the travel information having been obtained by the obtaining unit; and an output control unit that outputs information related to fatigue in the driver, on the basis of the travel information on the vehicle, the travel information having been accumulated by the accumulating unit.
09 - Scientific and electric apparatus and instruments
Goods & Services
CD players; CD recorders; DVD players; DVD recorders; video disc players; video disc recorders; sound mixers; audio speakers; turntables being record players; phonograph record players; amplifiers; sound and video effectors; electronic switchers for audio and video signals; headphones; downloadable computer software for playing virtual disc jockeys; downloadable computer software used for generating, reproducing, effecting, modifying, and processing sound, music, and video data; apparatus for recording, transmitting, and reproducing sound and images; record players; audio receivers; video receivers; audio speakers; microphones; microphone mixers; earphones; computer peripheral devices, namely, computer memories, and data processors; remote controllers for remotely controlling audio and video apparatus; cabinets for loudspeakers; audio racks; optical disc players; hard disc drive recorders; optical disc players and recorders for audio, video, and computer data; televisions; monitors
09 - Scientific and electric apparatus and instruments
Goods & Services
CD players and CD recorders; DVD players and DVD recorders; video disc players and video disc recorders; sound mixers; audio speakers; phonograph record turntables; amplifiers; sound and video effectors; audio and video processing apparatus, namely electronic switchers for audio and video signals; headphones; computer software for playing virtual disc jockeys; computer software used for generating, reproducing, effecting, modifying and processing sound, music, and video data; apparatus for recording, transmitting and reproducing sound and images; tape players and tape recorders, record players; radio tuners; video tuners; electronic tuners; signal tuners; audio receivers and video receivers; speaker systems; microphones and microphone mixers; earphones; Recording media; remote controllers for remotely controlling audio and video apparatus; cabinets for loudspeakers; audio racks; disc players and disc recorders; hard disc drive recorders; optical disc players and recorders for audio, video and computer data; televisions and monitors; home theater systems; parts and fittings for all the aforementioned goods.
Provided is a bracket for a speaker, the bracket being capable of ensuring the strength when the speaker is attached by using an attachment plate, and also enhancing the workability in folding of the attachment plate when the speaker is attached without using the attachment plate.
Provided is a bracket for a speaker, the bracket being capable of ensuring the strength when the speaker is attached by using an attachment plate, and also enhancing the workability in folding of the attachment plate when the speaker is attached without using the attachment plate.
The present invention includes: a frame-shaped support portion 10 which supports a speaker; and a mounting member 20 which is used for attaching the speaker supported by the support portion 10 to the outside and is provided in the support portion 10, wherein a plurality of grooves having different extension directions are continuously formed on a base part of the mounting member 20, the base part connecting the mounting member 20 and the support portion 10.
In the present invention, an information processing device has a U-shape detection unit (15), a distance calculation unit (16), and a tailgating determining unit (17). The U-shape detection unit (15) detects a following vehicle from a U-shape that is composed of a horizontal line and vertical lines of the vehicle bodies, which are composed of the road surface and the vehicle bodies. The distance calculation unit (16) calculates the distance between a self vehicle and the following vehicle on the basis of the U-shape. The tailgating determining unit (17) determines tailgating on the basis of the distance that is calculated by the distance calculation unit (16).
A notification apparatus includes an image obtaining unit and a notifying unit. The image obtaining unit obtains a surrounding image as an image of a surrounding of a moving body photographed from the moving body. The notifying unit notifies information regarding a type of an object when an object different from a predetermined feature appears in a first area where the predetermined feature is expected to appear inside the surrounding image. The first area is determined based on map information including position information of the predetermined feature and a position of the moving body at a time when the surrounding image is photographed.
G08G 1/0968 - Systems involving transmission of navigation instructions to the vehicle
G06V 20/58 - Recognition of moving objects or obstacles, e.g. vehicles or pedestrians; Recognition of traffic objects, e.g. traffic signs, traffic lights or roads
A light-emitting system includes a light-emitting device, and a holding member holding the light-emitting device. The light-emitting device includes a light-transmitting substrate, a plurality of light-emitting units provided on a first surface of the substrate away from each other, each light-emitting unit comprising a light-transmitting first electrode, a light-reflective second electrode, and an organic layer located between the first electrode and the second electrode, a light-transmitting region which is located between the light-emitting units, and through which light is transmitted in a thickness direction, and an optical filter that overlaps the light-transmitting region and does not overlap the plurality of light-emitting units. The holding member includes a pattern for giving light shielding characteristics.
H05B 33/22 - Light sources with substantially two-dimensional radiating surfaces characterised by the chemical or physical composition or the arrangement of auxiliary dielectric or reflective layers
H10K 50/86 - Arrangements for improving contrast, e.g. preventing reflection of ambient light
H05B 33/26 - Light sources with substantially two-dimensional radiating surfaces characterised by the composition or arrangement of the conductive material used as an electrode
43.
INFORMATION PROVIDING DEVICE, INFORMATION PROVIDING METHOD, AND INFORMATION PROVIDING PROGRAM
An information providing device is provided which can provide necessary guidance in an intuitively and easy-to-recognize form even when guidance is mainly by audio or sound.
An information providing device is provided which can provide necessary guidance in an intuitively and easy-to-recognize form even when guidance is mainly by audio or sound.
In searching for a route destination, when the distance to the destination is within a prescribed distance, guidance that includes information indicating the distance to the destination is provided by audio, and when the destination is farther than said prescribed distance, guidance that includes address information indicating the address of the destination is provided by audio (steps S28, S30, S17).
When there is a point that a user desires to confirm because the user could not understand a guidance voice or the guidance voice is insufficient to understand, a device or system finds out the situation and a cause of generation of the point that the user desires to confirm the guidance voice in order to improve the guidance voice. This information processing device outputs the guidance voice to be provided to the user from a voice output unit. In addition, a detection unit detects a response of the user for the guidance voice. In addition, an extraction unit extracts a confirmation action of the user pertaining to the guidance voice from the response detected by the detection unit. In addition, an estimation unit estimates, on the basis of the confirmation action, a point that the user desires to confirm. In addition, a storage unit stores information about the point estimated by the estimation unit.
This information processing device comprises: a captured image acquiring unit for acquiring captured images captured at each of a plurality of locations; a specified information acquiring unit for acquiring specified information indicating a plurality of specified locations and a specified date and time corresponding to each of the plurality of specified locations; and a display image acquiring unit which, on the basis of imaging date and time information assigned to the captured images, acquires, for each specified location, a captured image captured at an imaging date and time defined on the basis of the specified date and time, from among the plurality of captured images captured at the specified location, as a display image to be displayed superimposed on a map including the plurality of specified locations.
G06F 16/587 - Retrieval characterised by using metadata, e.g. metadata not derived from the content or metadata generated manually using geographical or spatial information, e.g. location
46.
DRIVING ASSISTANCE DEVICE, DRIVING ASSISTANCE METHOD, AND PROGRAM
This driving assistance device (1) comprises an output unit (10) and a vital information acquiring unit (30). The vital information acquiring unit (30) acquires vital information pertaining to an occupant in a vehicle. The output unit (10) outputs risk information, which is information pertaining to a risk of the vehicle, to an output device (2) disposed in the vehicle. The output unit (10) determines an output method of the risk information using the vital information at the time that the risk information is outputted or after the risk information has been outputted.
G08B 21/06 - Alarms for ensuring the safety of persons indicating a condition of sleep, e.g. anti-dozing alarms
G08B 25/04 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using a single signalling line, e.g. in a closed loop
47.
ADVERTISEMENT OUTPUT DEVICE, ADVERTISEMENT OUTPUT METHOD, AND PROGRAM
This advertisement output device (1) comprises an output unit (10) and a vital information acquisition unit (30). The output unit (10) causes an output device located inside of a vehicle to output an advertisement. The vital information acquisition unit (30) acquires vital information regarding the occupants of the vehicle. The output unit (10) determines the advertisement to be outputted and/or the output mode of the advertisement to be outputted, using the vital information when or after an advertisement was outputted.
An information generation device mountable on a mobile body includes at least one memory configured to store a program, and a central processing unit (CPU) coupled to the memory and configured to execute a program to acquire moving environment information concerning a moving environment the in which the mobile body moves, and generate information for transmission transmitted to another mobile body, the information for transmission including mobile body information of an item prioritized according to the moving environment information among a plurality of items concerning the mobile body.
A light-emitting unit (140) is formed on a substrate (100), and includes a light-transmitting first electrode (110), a light-reflective second electrode (130), and an organic layer (120) located between the first electrode (110) and the second electrode (130). A light-transmitting region is located between a plurality of light-emitting units (140). An insulating film (150) defines an end (142) of the light-emitting unit (140). A sealing member (200) is fixed to the light-emitting unit (140) directly or through an adhesive layer (210). In addition, a thickness of the substrate (100) is d, and a width of a portion of the second electrode (130) that is further on the outer side of the light-emitting unit (140) than the end (142) is W, d/2 W is established.
A controller 13 of this information processing device 1A functions as an acquisition means, a cluster generation means, and a ship orientation estimation means. The acquisition means acquires measurement data that is a collection of data representing a plurality of measured points yielded by measurements performed by a measurement device. The cluster generation means generates one or more clusters of the measured points of a ship on the basis of normal lines of the measured points of the ship. The ship orientation estimation means estimates the orientation of the ship on the basis of a first cluster that is a cluster with the greatest number of measured points of the ship.
B63B 49/00 - Arrangements of nautical instruments or navigational aids
B63B 79/10 - Monitoring properties or operating parameters of vessels in operation using sensors, e.g. pressure sensors, strain gauges or accelerometers
51.
INFORMATION PROCESSING DEVICE, CONTROL METHOD, PROGRAM, AND STORAGE MEDIUM
This information processing device has an acquisition means, a marker position acquisition means, and a search range setting means. The acquisition means acquires measurement data generated by a measurement device provided to a ship. The marker position acquisition means acquires, on the basis of the measurement data, a position of at least one marker provided to a berthing location. The search range setting means sets a search range of a point cloud of an edge part of the berthing location on the basis of the position of the at least one marker.
B63B 79/10 - Monitoring properties or operating parameters of vessels in operation using sensors, e.g. pressure sensors, strain gauges or accelerometers
52.
INFORMATION PROCESSING DEVICE, CONTROL METHOD, PROGRAM, AND STORAGE MEDIUM
This information processing device includes an acquisition means and a display processing means. The acquisition means acquires measurement data generated by a measurement device provided to a ship. On the basis of the measurement data, the display processing means performs a process for displaying, on a display device, information regarding the relative positional relationship between the ship and a berthing area, which is the area where the ship should be positioned when the ship is berthed at a berthing location.
G08G 3/00 - Traffic control systems for marine craft
B63B 79/10 - Monitoring properties or operating parameters of vessels in operation using sensors, e.g. pressure sensors, strain gauges or accelerometers
53.
POSITION ESTIMATION DEVICE, POSITION ESTIMATION METHOD, AND PROGRAM
A position estimation device (10) comprises a first acquisition unit (120), a second acquisition unit (140), a superimposition unit (160), and a first estimation unit (180). The first acquisition unit (120) acquires sets of point cloud data at a plurality of timings, the sets of point cloud data being obtained by a sensor mounted on a mobile object. The second acquisition unit (140) acquires information on movement of the mobile object. The superimposition unit (160) generates superimposed point cloud data that is obtained by superimposing the sets of point cloud data at a plurality of timings on one another on the basis of the movement information. The first estimation unit (180) estimates the position of a target by using the superimposed point cloud data.
This information processing apparatus has an acquisition means, a cluster generation means, and a straight line generation means. The acquisition means acquires measurement data that is a set of data indicating a plurality of measured points of a berthing place been measured by a measurement device provided to a vessel. The cluster generation means generates one or more clusters by dividing, through clustering, the plurality of measured points. The straight line generation means generates, on the basis of the one or more clusters, a straight line along the berthing place to which the vessel is to be berthed.
G05D 1/00 - Control of position, course, altitude, or attitude of land, water, air, or space vehicles, e.g. automatic pilot
B63B 49/00 - Arrangements of nautical instruments or navigational aids
B63B 79/40 - Monitoring properties or operating parameters of vessels in operation for controlling the operation of vessels, e.g. monitoring their speed, routing or maintenance schedules
B63H 25/04 - Initiating means for steering automatic, e.g. reacting to compass
G01S 17/93 - Lidar systems, specially adapted for specific applications for anti-collision purposes
G05D 1/08 - Control of attitude, i.e. control of roll, pitch, or yaw
55.
INFORMATION PROCESSING DEVICE, CONTROL METHOD, PROGRAM, AND STORAGE MEDIUM
This information processing device comprises an acquisition means, a nearest neighbor point extraction means, and a reference point setting means. The acquisition means acquires measurement data that is a set of data specified by a combination of an index indicating a horizontal position and an index indicating a vertical position, the indices being generated by a measurement device installed in a ship. The nearest neighbor point extraction means extracts, from pieces of data indicating the measurement points of a berth location, data indicating the nearest neighbor point nearest to a reference point of the ship for each index indicating the horizontal position. The reference point setting means sets a reference point at the next processing time on the basis of the nearest neighbor point.
B63B 79/40 - Monitoring properties or operating parameters of vessels in operation for controlling the operation of vessels, e.g. monitoring their speed, routing or maintenance schedules
B63B 49/00 - Arrangements of nautical instruments or navigational aids
B63B 79/10 - Monitoring properties or operating parameters of vessels in operation using sensors, e.g. pressure sensors, strain gauges or accelerometers
A controller 13 of an information processing device 1 has at least an acquisition means, a straight line calculation means, and a distance calculation means. The acquisition means acquires measurement data, which is a set of data representing a plurality of measured points measured by a measurement device provided in a ship. The straight line calculation means calculates, on the basis of the measurement data, a straight line extending along a berthing location at which the ship is to berth. The distance calculation means calculates an opposite shore distance between the ship and the berthing location on the basis of distances between the straight line and the individual measured points.
G08G 3/00 - Traffic control systems for marine craft
B63B 79/10 - Monitoring properties or operating parameters of vessels in operation using sensors, e.g. pressure sensors, strain gauges or accelerometers
57.
ESTIMATION DEVICE, SYSTEM, ESTIMATION METHOD, AND PROGRAM
An estimation device (10) comprises a first acquisition unit (110), a second acquisition unit (130), a division unit (150), a ratio value calculation unit (170), and an estimation unit (190). The first acquisition unit (110) acquires point cloud data at a plurality of timings, the point cloud data being obtained by a sensor mounted to a moving body. The second acquisition unit (130) acquires map information. The division unit (150) divides each point cloud data acquired by the first acquisition unit (110) into a prescribed plurality of areas. The ratio value calculation unit (170) calculates, with regard to a first area and a second area differing from the first area, a ratio value indicating a correspondence ratio between the map information and each data point in an area. The estimation unit (190) uses a strength of correlation between a ratio value of the first area shifted by time or position and a ratio value of the second area and identifies an estimated change point where the content of map information is estimated to differ from the actual conditions.
A controller 13 of an information processing device 1 functions as an acquiring means, an extracting means, and a straight line calculating means. The acquiring means acquires point cloud data generated by a lidar 3 provided to a target vessel, the point cloud data being a data set specified by pairs of a horizontal number, which serves as an index representing a horizontal position, and a vertical number, which serves as an index representing a vertical position. For each horizontal number, that is, for each vertical line, the extracting means extracts data representing the nearest point closest to the target vessel from among pieces of data representing points to be measured at a docking place. Further, the straight line calculating means calculates a docking side surface straight line Ls conforming to the docking place on the basis of a near point set of data representing the nearest points.
B63H 25/04 - Initiating means for steering automatic, e.g. reacting to compass
B63B 49/00 - Arrangements of nautical instruments or navigational aids
B63B 79/10 - Monitoring properties or operating parameters of vessels in operation using sensors, e.g. pressure sensors, strain gauges or accelerometers
B63B 79/40 - Monitoring properties or operating parameters of vessels in operation for controlling the operation of vessels, e.g. monitoring their speed, routing or maintenance schedules
B63H 25/00 - Steering; Slowing-down otherwise than by use of propulsive elements; Dynamic anchoring, i.e. positioning vessels by means of main or auxiliary propulsive elements
G01S 17/93 - Lidar systems, specially adapted for specific applications for anti-collision purposes
59.
INFORMATION PROCESSING DEVICE, CONTROL METHOD, PROGRAM, AND STORAGE MEDIUM
In this information processing device 1, a controller 13 primarily functions as an acquisition means, a surface detection means, an orientation estimation means, and an overall area estimation means. The acquisition means acquires measurement data output by a measurement device. The surface detection means detects at least one surface of an object from the measurement data. The orientation estimation means estimates the orientation of the object on the basis of the detected surface. The overall area estimation means estimates the overall area of the object on the basis of the estimated orientation and the measurement data.
In the present invention, a point group data processing block 73 acquires point group data generated by an optical measuring device that is directed at a liquid surface and measures distance by receiving the reflected light of the emitted light. The point group data processing block 73 extracts, from the point group data, reflective member measurement data obtained by measuring a reflective member 200 provided at a position where the light reflected by the liquid surface is projected. The point group data processing block 73 then calculates the distance to the liquid surface on the basis of the reflective member measurement data.
41 - Education, entertainment, sporting and cultural services
Goods & Services
Education and training services, namely, providing classes and instruction relating to DJ skills; education and training services, namely, providing online classes and instruction relating to DJ skills; providing information on education relating to DJ schools; rental of audio equipment; rental of lighting equipment for theatrical sets or television studios; rental of DJ equipment, namely, rental of audio equipment; audio studio services; DJ studio services, namely, disc jockey services; providing information relating to audio or video studio services, namely, providing information in the field of audio and video production; providing information via internet relating to audio or video studio services, namely, providing information in the field of audio and video production; education and training services, namely, providing live classes and instruction relating to DJ skills; providing a DJ to perform at various events; organization and operation of group for training of DJs, namely, training services in the field of disc jockey services; arranging, conducting and organization of live show events featuring DJs and DJ equipment, namely, live disc jockey services; arranging and conducting of club entertainment events featuring DJ services; providing information in the field of entertainment relating to the club entertainment events featuring DJ services; entertainment services in the nature of live musical performances by DJ; planning, arranging and conducting DJ contests; education services, namely, providing classes and instruction in the fields of arts, crafts, and sports; arranging, conducting and organization of seminars; providing online non-downloadable electronic publications in the nature of magazines in the field of music; publication of books; planning arrangement of showing of movies, shows, plays or musical performances; presentation of live show performances; presentation of musical performances; video tape film production in the field of education, culture, entertainment and sports, not for movies or television programs and not for advertising or publicity; operation of video and audio equipment for production of radio and television programs; entertainment services in the nature of organizing social entertainment events excluding movies, shows, plays, musical performances, sports, horse races, bicycle races, boat races and auto races; providing audio or video studio services; providing amusement facilities; providing facilities for movies, shows, plays, music or educational training; rental of musical instruments; rental of records or sound-recorded magnetic tapes; rental of image-recorded magnetic tapes
Provided is a speaker device by which the occurrence of unusual sounds due to a coupler vibration plate coming into contact with a drive vibration plate can be suppressed, and sound quality can be improved. This speaker device (1) comprises: a frame (2); a magnetic circuit (3); a voice coil (42); a voice coil bobbin (41); a drive vibration plate (5) to which the voice coil bobbin (41) is attached; a first edge (6) that connects the outer peripheral side of the drive vibration plate (5) to the frame (2); a coupler vibration plate (7A) that is arranged coaxially with the drive vibration plate (5); and a second edge (8A) that connects the outer peripheral side of the coupler vibration plate (7A) to the frame (2). Seen from the direction of the central axis of the drive vibration plate (5), the coupler vibration plate (7A) has a smaller size than the drive vibration plate (5), and the projection area of the second edge (8A) is formed to be greater than the projection area of the first edge (6).
A controller 13 of an information processing device 1 mainly functions as a first acquisition means, a second acquisition means, and an object detection means. The first acquisition means acquires point cloud data that is a set of data for each point measured by a measurement device. The second acquisition means acquires movement area information relating to the movement area of an object on a horizontal plane within the measurement range of the measurement device. The object detection means detects a data cluster for each object from the point cloud data on the basis of the movement area information.
When designating a section from within the movement trajectory of an object displayed on a map, the present invention, while enabling fine adjustment of the section, reduces the time and effort for this adjustment and improves usability. Items representing the position of an object at each instance of a first time interval are displayed on a map as the trajectory of the object, and one of the items is set as a first selection point. A plurality of items representing the position of the object at each time that is separated, in units of a second time interval longer than the first time interval, from the time pertaining to the set first selection point are extracted and displayed as candidates for a second selection point. After having set the first selection point, a first selection point setting unit accepts, in units of the first time interval, a correction of the first selection point to other items. A second selection point candidate display unit re-extracts, as candidates for a second selection point, a plurality of items representing the position at each time that is separated in units of the second time interval from the time pertaining to a new first selection point.
Information pertaining to a moving body is distributed while privacy is protected. A terminal device associated with a user is permitted to receive the delivery of moving body information including information pertaining to the moving body from a first time point related to the time when the user boarded the moving body until a second time point related to the time when the user exited the moving body.
This information processing device acquires driving data related to the driving of a vehicle and estimates the emission amount of a greenhouse effect gas on the basis of the driving data. The information processing device then outputs a plan for offsetting the emission of the greenhouse effect gas on the basis of the emission amount.
This terminal device acquires a user's questioning-voice asking about a terrestrial object, and acquires an image relating to that terrestrial object on the basis of the questioning-voice. The terminal device then generates, and transmits to a server device, question data including position information of a mobile object, at the time of acquiring the questioning-voice, and the acquired image. In this manner, the terminal device transmits the user's question about the terrestrial object to the server device and requests a response to the question therefrom.
A content output device has a detection unit, a content acquisition unit, and an output unit. The detection unit detects the occurrence of a predetermined situation in a vehicle. The content acquisition unit acquires a content group including a plurality of pieces of content for audio guidance in order to notify occupants in the vehicle of the occurrence of a predetermined situation. The output unit outputs, among the content included in the content group, content corresponding to the number of occurrences of the predetermined situation in a vehicle.
This content evaluation device comprises a content acquisition unit, an output unit, a speech recognition unit, and an evaluation unit. The content acquisition unit acquires speech content to be output to a passenger of a vehicle. The output unit outputs the speech content. The speech recognition unit performs a speech recognition process for recognizing predetermined words included in a passenger's utterance after the speech content is output. The evaluation unit evaluates the effectiveness of the speech content output to the passenger, on the basis of the result of the speech recognition process.
B60R 16/02 - Electric or fluid circuits specially adapted for vehicles and not otherwise provided for; Arrangement of elements of electric or fluid circuits specially adapted for vehicles and not otherwise provided for electric
G06Q 30/015 - Providing customer assistance, e.g. assisting a customer within a business location or via helpdesk
71.
CONTENT OUTPUT DEVICE, CONTENT OUTPUT METHOD, PROGRAM, AND STORAGE MEDIUM
This content output device comprises a content acquisition unit, an output unit, a storage unit, and an adjustment unit. The content acquisition unit acquires content relating to a feature corresponding to the current location of a vehicle. The output unit outputs the content to the vehicle. The storage unit stores therein management information for managing the output state of the content in the vehicle. The adjustment unit adjusts the output frequency of the content on the basis of the management information.
This content output device acquires feature information related to feature on the basis of a host vehicle position and generates audio content related to the feature on the basis of the feature information. Additionally, the content output device generates, on the basis of the feature information and prescribed words included in the audio content, display content that indicates the details of the audio content.
The present invention distributes information relating to a mobile object while protecting privacy. The present invention includes an acquisition processing step for mobile object position information acquired by a mobile object patrolling a plurality of destinations, and a step for distributing distribution information that includes information relating to a current position of the mobile object to a terminal device associated with the destinations, wherein the distribution information includes first information and second information differing from the first information, the first information is distributed to a terminal device associated with a destination to be visited next by the mobile object, and the second information is distributed to a terminal device associated with a destination other than the destination to be visited next by the mobile object.
A detection target is set according to various imaging circumstances, and the fact that the detection target has been successfully imaged is confirmed in real time. An information processing device according to the present invention collects, in an information collection unit, basic information including travel information of a mobile body and peripheral information of the mobile body. An imaging unit continuously performs imaging. Either a case in which the basic information satisfies a prescribed condition in an evaluation target image setting unit or a case in which an instruction operation is received serves as a trigger, and images from during a prescribed period of time from among the images imaged by the imaging unit are set as evaluation target images. A detection target setting unit sets the detection target on the basis of the basic information and the trigger related to the evaluation target images. The output unit issues a notification that the detection target set from among the evaluation target images exists.
A storage unit 6 stores an elapsed time for each piece of identification information that identifies a communication contract. A communication unit 4 performs communication using the identification information. A measurement unit 15, when a power source of a communication control terminal 1 is turned to an ON state, reads from the storage unit 6 the elapsed time corresponding to the identification information used for communication by the communication unit 4, and continues to measure the elapsed time from the read elapsed time. A communication control unit 17 allows the communication by the communication unit 4 if the elapsed time measured by the measurement unit 15 is within a predetermined allowable time, and restricts the use of communication by the communication unit 4 if the elapsed time exceeds the allowable time.
This content output device comprises: a geographical feature information acquisition unit that acquires geographical feature information about a geographical feature on the basis of an own vehicle position; a fixed phrase acquisition unit that acquires a fixed phrase prepared in advance for respective types of geographical features; and a content generation unit that inserts a word included in the acquired geographical feature information into the fixed phrase and generates content.
Provided is an information processing device which controls sound volume so that a user can reliably discern speech such as speech guidance without incompatibility in terms of the sense of hearing. The information processing device comprises: a noise detection unit 20 which detects the noise level of a sound in a vehicle cabin, the sound being picked up in a sound pickup unit 10; a command speaking detection unit 30 which detects whether a command speaking period is in effect, which is a period after a wakeup word from spoken speech of the user is detected to when command speaking from the user is detected; and a sound volume control unit 50 which, when the noise level is not detected in the command speaking period, sets, on the basis of the noise level, the volume of a speech output to the user, and, when the noise level is detected in the command speaking period, does not set the volume of speech based on the noise level.
Provided is an information processing device that performs volume control in which a volume change does not occur during output of a voice of for voice guidance or the like, such that a user can reliably hear said voice. The information processing device comprises: a noise detection unit 20 that detects the noise level of sound in a vehicle; a voice detection unit 30 that detects whether or not a voice is being output to a user; and a volume control unit 50 that sets the volume of the voice in accordance with the noise level when receiving from the voice detection unit 30 a detection result which indicates that voice is not being output to the user, and that does not change the volume of the voice when receiving from the voice detection unit 30 a detection result which indicates that a voice is being output to the user.
A speaker device includes: a diaphragm that radiates sound; an edge arranged in an outer periphery of the diaphragm; an attachment part facing an outer peripheral region of the edge; and a connecting member held between the outer peripheral region of the edge and the attachment part, wherein the edge has a curved portion convexly curved on a sound radiation side.
A control unit 7 of a lidar functionally has an acquiring means, an obstacle detecting means, a ground surface detecting means, a curb assessing means, and a travelable region determining means. The acquiring means acquires point group data. The obstacle detecting means detects, from the point group data, obstacle points that are data representing points to be measured of an obstacle. The ground surface detecting means detects, from the point group data, ground surface points that are data representing points to be measured on the ground surface. The curb assessing means assesses that ground surface points corresponding to a curb are obstacle points on the basis of a travelable region of a vehicle assessed at a processing time immediately before the current processing time. The travelable region determining means determines the travelable region at the current processing time on the basis of the obstacle points and the ground surface points.
This information processing device functionally comprises an acquisition means, a detection means, and a processing means. The acquisition means acquires point group information, which is an aggregate of data representing points measured by a measuring device per each measuring direction. The detection means detects a fluctuation, of a specified degree or more, of the measuring device. On the basis of the presence or absence of a detection of the fluctuation, the processing means determines a searching range in which to search for a point from point group information obtained at a prior processing time corresponding to each point from point group information obtained at a current processing time.
An information processing device (100) for outputting a speech guidance in accordance with the current position of a vehicle is characterized by comprising: an acquisition unit (132) that acquires current position information indicating the current position of the vehicle and traveling history information indicating traveling history of the vehicle; and an estimation unit (135) that estimates duration time of a period in which outputting of the speech guidance is unnecessary, on the basis of the current position information and the traveling history information.
An information processing device (100, 200) is characterized by including: an acquiring unit (232) for acquiring route information indicating a travel route of a vehicle to a destination, map information corresponding to the travel route, and current position information indicating a current position of the vehicle; an estimating unit (234) for estimating a call recommendation time period for recommending a call to a driver of the vehicle, from within a driving period during which the vehicle is being driven along the travel route, on the basis of the route information, the map information, and the current position information; and a providing unit (134) for providing schedule information indicating the call recommendation time period to an external device (300).
42 - Scientific, technological and industrial services, research and design
Goods & Services
(1) Scientific and technological services and research and design relating thereto; industrial analysis, industrial research and industrial design services; quality control and authentication services; provision of information relating to weather forecasts, climate, news, and news analysis, through the Internet and other computer and communication networks; computer software design, computer programming, or maintenance of computer software; rental of computers; technological advice relating to computers, automobiles and industrial machines; remote monitoring of computers and computer programs using data communication networks; provision of non-downloadable computer software; provision of information on results of big data collection, analysis, and storage; online provision of application software (SaaS), provision of information relating thereto, and consulting therefor; provision of computer software platforms (PaaS); cloud computing; provision of information relating to cloud computing; provision of computer software for cloud computing; cloud computing for database management; provision of non-downloadable cloud computing software for use in the field of electronic data storage; cloud storage services for electronic data; conversion of data using computers; provision of computer software converting voice data to text; online provision of voice recognition application software; online provision of computer application software for voice recognition and for conversion of voice data to text, and computer application software that can be operated by voice; computer conversion of text, image, and voice data to text, image, and voice signals, and processing of these signals into recording media; online provision of application software for voice commands and voice recognition (SaaS); online provision of computer application software for voice commands and voice recognition, computer software for voice-text conversion, and computer application software that can be operated by computer software and voice (SaaS); design and development of computer hardware and software; online provision of application software for accessing, monitoring, tracking, searching, storing, and sharing data on general topics (SaaS); providing non-downloadable computer software for the management of personal information; online provision of application software for connecting, browsing, and searching online databases, audio and multimedia content, games, software applications, software application marketplaces, program listings and guides, and video on-demand sites (SaaS); online provision of applications software allowing computer or portable consumer use electronic devices to download and connect to audio files and multimedia files (SaaS); online provision of application software for searching data, addresses, and applications stored in portable data terminals (SaaS); online provision of application software for creation of indices for data, websites, and other data resources (SaaS); online provision of application software for control of speakers (SaaS); online provision of application software used in connection with periodic video content purchase services providing search platforms for users' searching, ordering, and reception of digital media content and application software (SaaS); online provision of application software for production, authoring, distribution, download, transmission, reception, reproduction, edition, extraction, extraction, encryption, decryption, display ,store and management audio and multimedia content (SaaS); online provision of application software for management personal information and for connection, browse and search online database, audio, video and multimedia content, game, application software, application software market place, program listing, guide and video on demand (SaaS); provision of non-downloadable computer software for connection by streaming method audio and video file, game, social network and text and multimedia file (SaaS); provision of non-downloadable computer software used in voice recognition and voice-enabled software application by application service provider; provision of non-downloadable computer software for engaging users to transmit music, video, and audio recordings over communication networks; hosting online databases via the Internet containing a wide variety of information of general interest; provision of computer program for data transfer processing; website hosting; data storage for servers; data storage for e-mail on server; data storage for e-mail; provision of non-downloadable computer program for social networking; user authentication services for computer network; user authentication services for e-commerce transaction; provision of non-downloadable computer software for e-commerce, online payments, website design, data storage, and measurement of shared computer capacity; data encryption services; backup processing of data in computer systems; design, development and maintenance of computer software in the fields of natural language, speech, speaker, language, speech recognition and voiceprint recognition; provision of non-downloadable computer software for recording personal appointments, synchronizing and sharing calendar appointments with others, providing automatic reminders, and creating event schedules; rental of web servers; hosting websites of third party contents, photos, videos, texts, data, images, websites; provision of information on environmental conservation via the Internet and the other networks; electronic data storage; website hosting for others; operating system and computer application hosting via the Internet; provision of virtual computing environment accessible via the Internet; provision of non-downloadable computer software for management computer application accessible via the Internet; provision of non-downloadable computer software by application service providers; provision of non-downloadable computer software for management multimedia application; provision of non-downloadable computer software for presentation, management, survey, data and equipment management, and outsourcing; provision of non-downloadable computer software for analysis individual preferences and recommendation goods or services on the analysis results; provision of non-downloadable computer software for internet browsers; provision of non-downloadable computer software for mobile communication devices to enhance mobile access to the Internet via computers, mobile computers, and mobile communication devices; provision of computer programs for search platforms that enable users to request and receive photos, videos, text, data, images, and digital art works; provision of computer programs for social networking services that allow users to participate in discussions, obtain feedback, and form virtual communities; providing computer programs on data networks; provision of computer programs for search platforms that enable users to request or receive content, text, visual works, auditory works, audiovisual works, literary works, data, files, documents, electronic works; providing temporary use of non-downloadable online computer software that generates customized suggestions for computer software applications based on the user's choices and preferences; online database hosting; provision of operating system and computer application hosted via the Internet; provision of non-downloadable computer software for management computer application via global computer network; provision of temporary use of online non-downloadable computer software development tools for design and development of electronic games; provision of non-downloadable computer software for access audio and video file, game, social network and text and multimedia file provided by streaming; provision of non-downloadable computer software; provision of non-downloadable computer software for telecommunication; provision of non-downloadable computer software for facial recognition; provision of non-downloadable computer software for gesture recognition; provision of non-downloadable computer software for grasping driver situations; provision of non-downloadable computer software for road and traffic information; provision of non-downloadable computer software for road hazard information; provision of non-downloadable computer software for information on traffic congestion prediction; provision of computer programs with artificial intelligence functions.
An optical device includes a light receiving unit that receives reflected light reflected from an object by emitted light emitted from a light emitting unit, an optical element that guides incident light including the reflected light and ambient light from a region including the object to a position on the light receiving unit according to a component included in the incident light, and a detection device that detects the reflected light based on a distribution of received light intensity on the light receiving unit. A light receiving element of the light receiving unit is arranged in a second direction intersecting a first direction in which the incident light is dispersed by the optical element.
The present invention reduces the amount of unnecessary reports. A notification regarding the occurrence of a shock in an information processing device is issued, the cause of the shock is assessed, and, if it is assessed that the cause of the shock is falling of the information processing device, no report relating to the shock is made.
G08B 21/02 - Alarms for ensuring the safety of persons
G08B 25/00 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems
G08B 25/10 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using wireless transmission systems
90.
INFORMATION PROCESSING DEVICE, INFORMATION PROCESSING METHOD, AND INFORMATION PROCESSING PROGRAM
An information processing device (100) according to the present application has: an acquisition unit (132) for acquiring history information of parking positions at which a user parked a vehicle; a calculation unit (133) for, on the basis of a predetermined parameter in a first extraction region extracted in accordance with the distribution situation of the parking positions, calculating a degree of regional prosperity that is the degree of prosperity in the first extraction region; and a specification unit (135) for specifying, on the basis of the first extraction region and the degree of regional prosperity, a second extraction region that is a living area of the user.
A controller 13 of an information processing device 1 acquires integrated point group data that is three-dimensional data regarding an object to be measured that is generated on the basis of point group data generated by a plurality of lidars 3 that measure a space in which the object to be measured is disposed. The controller 13 detects a grid to be interpolated that is lacking in the integrated point group data. The controller 13 determines a candidate height for interpolation of a grid to be interpolated for each of a plurality of directions on the basis of the angle of inclination of the object to be measured with respect to each of the plurality of directions at a location to be interpolated. The controller 13 generates interpolation data for the grid to be interpolated on the basis of the candidate heights.
Disclosed is a vehicle lighting device intended to improve convenience and safety. A vehicle lighting device includes a light disposed in a vehicle interior, a controller controlling the light, and a detecting unit detecting position or motion of a detecting object by detecting a detection object at a plurality of positions, and the controller controls the light when the position or motion of the detection object is detected by the detecting unit.
G06F 3/04847 - Interaction techniques to control parameter settings, e.g. interaction with sliders or dials
G06F 3/0488 - Interaction techniques based on graphical user interfaces [GUI] using specific features provided by the input device, e.g. functions controlled by the rotation of a mouse with dual sensing arrangements, or of the nature of the input device, e.g. tap gestures based on pressure sensed by a digitiser using a touch-screen or digitiser, e.g. input of commands through traced gestures
H05B 47/115 - Controlling the light source in response to determined parameters by determining the presence or movement of objects or living beings
G06F 3/04883 - Interaction techniques based on graphical user interfaces [GUI] using specific features provided by the input device, e.g. functions controlled by the rotation of a mouse with dual sensing arrangements, or of the nature of the input device, e.g. tap gestures based on pressure sensed by a digitiser using a touch-screen or digitiser, e.g. input of commands through traced gestures for inputting data by handwriting, e.g. gesture or text
An information processing device (10) according to the present application comprises: an acquisition unit (13a) that acquires, from an information presentation device (100) which moves with a mobile body and reproduces and outputs content when a prescribed condition has been satisfied, outputted content which has been reproduced and outputted, with position information indicating the position where the content was reproduced and outputted being added to the content; and a display control unit (13d) that displays first image information in which a reproduction position on a map image that is determined on the basis of the position information is associated with content information indicating the outputted content that was reproduced and outputted at the reproduction position.
The present invention provides an information provision device and the like capable of reliably providing necessary guidance information while reducing the amount of audio information that is necessary for processing.
The present invention provides an information provision device and the like capable of reliably providing necessary guidance information while reducing the amount of audio information that is necessary for processing.
The information provision device is provided with: a guidance voice output control unit 1 and a speaker 10 which output a guidance voice; a microphone 11 and a collected sound transmission unit 2 which collect sounds that are made after the guidance voice starts to be output, wherein the guidance voice output control unit 1 and the speaker 10 output re-guidance voice corresponding to the guidance voice, on the basis of the result of determination of whether the collected sounds include a specific sound.
This information processing device is characterized by comprising: an acquisition unit that acquires the current position of a mobile body; and a display control unit that displays an image having been posted by being associated with position information in a map of a prescribed range including the current position, on the basis of priority based on the current position and ease of access from the current position.
A light emitting element includes a flexible plate-like portion, and a fixation member fixing the flexible plate-like portion. The flexible plate-like portion includes a light extraction film, a sealing layer, an organic functional layer including a light emitting layer, a glass substrate, and a resin layer having a thickness greater than that of the glass substrate. The fixation member fixes the flexible plate-like portion such that the flexible plate-like portion includes a concave surface and a convex surface opposite to the concave surface, and such that the glass substrate is positioned on a side of the concave surface relative to the resin layer. A center of a thickness direction of the glass substrate is closer to the concave surface than a center of a thickness direction of the flexible plate-like portion is.
H01L 51/00 - Solid state devices using organic materials as the active part, or using a combination of organic materials with other materials as the active part; Processes or apparatus specially adapted for the manufacture or treatment of such devices, or of parts thereof
The length of a moving body made of a material that hardly reflects laser light is measured with high accuracy.
The length of a moving body made of a material that hardly reflects laser light is measured with high accuracy.
First point cloud information based on three-dimensional point cloud information of a first region A1 of a moving body path RW in which a movement direction is set, second point cloud information based on three-dimensional point cloud information of a second region A2, and third point cloud information based on three-dimensional point cloud information of a third region A3 downstream of the second region A2 are acquired in a time series. A velocity VAM of a moving body AM is calculated based on a temporal change of the first point cloud information A1. A front end position FE of the moving body AM at a first time T1 is calculated based on the second point cloud information A2. A rear end position RE of the moving body AM at a second time T2 is calculated based on the third point cloud information A3. A length LAM of the moving body is calculated based on the velocity VAM of the moving body, the front end position FE of the moving body AM at the first time T1, and the rear end position RE of the moving body AM at the second time T2.
An information recording device acquires outside image information corresponding to an outside image obtained by photographing the outside of a moving body from the moving body; acquires autonomous driving information indicating a state of autonomous driving control of the moving body; acquires display information for simultaneously displaying at least a part of the outside image and an autonomous driving state image indicating the state of the autonomous driving control at a time of photographing the outside image, based on the outside image information and the autonomous driving information; and records the display information in a recording medium. The autonomous driving state image includes brake information indicating whether braking of the moving body is under the autonomous driving control.
B60W 50/14 - Means for informing the driver, warning the driver or prompting a driver intervention
B60K 35/00 - Arrangement or adaptations of instruments
G07C 5/08 - Registering or indicating performance data other than driving, working, idle, or waiting time, with or without registering driving, working, idle, or waiting time
99.
COMMUNICATION SYSTEM, COMMUNICATION DEVICE, SERVER DEVICE, COMMUNICATION METHOD, COMMUNICATION PROGRAM, AND STORAGE MEDIUM
The present invention pertains to a communication system which performs voice and video communication of transmitting video and voice in a movable body that have been acquired by a first device, which moves together with the movable body, to a second device. The communication system includes: a video acquisition unit for successively acquiring videos captured at the movable body; a steering operation information acquisition unit for successively acquiring steering operation information indicating the steering operation for the movable body by a person who steers the movable body; and a display control unit for performing display control for displaying, in the second device, both the video and a display that is based on the steering operation information.
[Problem] To provide an information processing device with which a user outside a vehicle such as an automobile can enjoy a virtual drive together with the occupants in the vehicle. [Solution] An information processing device according to the present invention is characterized by comprising: an acquisition unit that acquires current position information of a moving body and an external image of the moving body captured during movement of the moving body by an image capture unit disposed on the moving body; a transmission unit that performs a transmission process for transmitting, to a terminal device, a travel image in which information based on the current position information is superimposed on the external image acquired by the acquisition unit; and a voice call unit that, concurrently with the transmission process, performs a voice call process for an occupant of the moving body and the user of the terminal device to engage in a voice call with each other.
