|
Résultats pour
marques
1.
|
ACCELERATORKMS
Numéro de série |
79379777 |
Statut |
En instance |
Date de dépôt |
2023-06-15 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 41 - Éducation, divertissements, activités sportives et culturelles
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Computer software for use as a Procedure Lifecycle Management (PLCM) to manage the procedure life-cycle for Standard Operating Procedures (SOP), Maintenance Procedures, Asset Operating Procedures (AOP), Turnaround Procedures, Commissioning Testing Procedures, Emergency Procedures, and Unit Operating Procedures (UOP) to ensure compliance with current standards of practice in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; computer software for use as a Connected Worker Platform (CWP) to deliver all critical operational content for use in the Asset Performance Management (APM) system with operations technology in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; computer software for use as a Learner Experience Platform (LXP); computer software for use as a Component Content Management System (CCMS); computer software for use as a Quality Management System (QMS) in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries Computer training, advanced design services, namely, e-learning training and instructor-led training to assist clients in the development and implementation of electronic course content for implementing digital knowledge management systems via a Learner Experience Platform (LXP); Technical training, namely, training in the maintenance and mentoring of content as well as architecture of digital content of learning content management systems, and training in the use of learning content management systems and their IT integration Architectural consultancy, computer programming consultancy, research services in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; Data migration services; computer network configuration services; Software as a Service (SaaS) services for use as a Procedure Lifecycle Management (PLCM) to manage the procedure life-cycle for Standard Operating Procedures (SOP), Maintenance Procedures, Asset Operating Procedures (AOP), Turnaround Procedures, Commissioning Testing Procedures, Emergency Procedures, and Unit Operating Procedures (UOP) to ensure compliance with current standards of practice in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; Software as a Service (SaaS) services for use as a Connected Worker Platform (CWP) to deliver all critical operational content for use in the Asset Performance Management (APM) system with operations technology in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; software as a Service (SaaS) services for use as a Learner Experience Platform (LXP) featuring as an e-learning content management system and delivery of learning content in the oil, gas and chemical processing industries; software as a Service (SaaS) services for use as a Quality Management System (QMS) in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; software as a Service (SaaS) services for use as a Component Content Management System (CCMS) in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; cloud computing featuring software for data collection and data analysis in the fields of asset optimization, machine diagnostics, and optimization of industrial in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; software as a Service (SaaS) services featuring software for data collection and data analysis in the fields of asset optimization, machine diagnostics, and optimization of industrial processes in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; software as a Service (SaaS) services featuring software for use in collecting, analyzing, and delivering data to optimize performance in the industrial process, equipment and production systems across the exploration and production segments, the processing, storage and transportation pipelines segments, and the refining and retail distribution segments of the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries; software as a Service (SaaS) services featuring software for use in asset performance management, production optimization, process optimization and resource optimization of the industrial process, equipment and production systems in the oil, gas, chemical processing, power generation, civil infrastructure, food processing, forestry, pharmaceuticals, ceramics, base metals, plastics, rubber, textiles, tobacco, wood, paper, automotive, construction, consumer packaging, furniture, cosmetics industries
|
2.
|
NEXUS
Numéro de série |
79350797 |
Statut |
En instance |
Date de dépôt |
2022-07-12 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Computer engineering services; engineering services; rental of computer hardware and software; software as a service (SaaS) featuring software for facilitating communication and collaboration among users, exchanging data, building collaborative workflows across design, engineering, manufacturing, and quality control of mechanical parts, managing products, viewing and accessing metrology information and insights all for use in decision making, visualization and material data management, selection of materials, material properties, mechanical design, and mechanical specifications, simulating mechanical, thermal, or acoustic properties with respect to temperature, stress, wear and tear, and dynamical behavior, for designing and simulating manufacturing processes of mechanical parts, such as molding, milling, additive manufacturing and the like; for creating quality indicators and inspection plans for measuring, evaluating, and ensuring manufacturing quality; Platform as a service (PaaS) featuring software for facilitating communication and collaboration among users, exchanging data, building collaborative workflows across design, engineering, manufacturing, and quality control of mechanical parts, managing products, viewing and accessing metrology information and insights all for use in decision making, visualization and material data management, selection of materials, material properties, mechanical design, and mechanical specifications, simulating mechanical, thermal, or acoustic properties with respect to temperature, stress, wear and tear, and dynamical behavior, for designing and simulating manufacturing processes of mechanical parts, such as molding, milling, additive manufacturing and the like; for creating quality indicators and inspection plans for measuring, evaluating, and ensuring manufacturing quality; Providing temporary use of online non-downloadable software featuring software for facilitating communication and collaboration among users, exchanging data, building collaborative workflows across design, engineering, manufacturing, and quality control of mechanical parts, managing products, viewing and accessing metrology information and insights all for use in decision making, visualization and material data management, selection of materials, material properties, mechanical design, and mechanical specifications, simulating mechanical, thermal, or acoustic properties with respect to temperature, stress, wear and tear, and dynamical behavior, for designing and simulating manufacturing processes of mechanical parts, such as molding, milling, additive manufacturing and the like; for creating quality indicators and inspection plans for measuring, evaluating, and ensuring manufacturing quality; computer software applications featuring software for facilitating communication and collaboration among users, exchanging data, building collaborative workflows across design, engineering, manufacturing, and quality control of mechanical parts, managing products, viewing and accessing metrology information and insights all for use in decision making, visualization and material data management, selection of materials, material properties, mechanical design, and mechanical specifications, simulating mechanical, thermal, or acoustic properties with respect to temperature, stress, wear and tear, and dynamical behavior, for designing and simulating manufacturing processes of mechanical parts, such as molding, milling, additive manufacturing and the like; for creating quality indicators and inspection plans for measuring, evaluating, and ensuring manufacturing quality; computer operating system software for development, design and simulation in the field of engineering services; consultancy and information services relating to information technology; computer software technical support services; all the aforesaid services exclusively in the fields of manufacturing planning, manufacturing execution, manufacturing monitoring, manufacturing control, manufacturing optimization, manufacturing engineering design, manufacturing simulation, manufacturing modelling, construction planning, construction execution, construction monitoring, construction control, construction optimization, construction engineering design, construction simulation, construction modelling, production planning, production execution, production monitoring, production control, production optimization, production engineering design, production simulation and production modelling
|
3.
|
CYBER INTEGRITY
Numéro de série |
90200241 |
Statut |
Enregistrée |
Date de dépôt |
2020-09-22 |
Date d'enregistrement |
2022-02-08 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
41 - Éducation, divertissements, activités sportives et culturelles
|
Produits et services
Providing technical training regarding the design, implementation, and maintenance of computer software for monitoring, displaying, configuring, maintaining and operating automated installations, partially automated installations, equipment and predefined graphics and object libraries for use in control systems in industrial applications
|
4.
|
IPL ASSURANCE
Numéro de série |
90043925 |
Statut |
En instance |
Date de dépôt |
2020-07-09 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 41 - Éducation, divertissements, activités sportives et culturelles
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Recorded and downloadable software for monitoring, displaying, controlling, configuring, maintaining and operating automated installations, partially automated installations and equipment; recorded and downloadable software for diagnosing and monitoring system performance of automated installations, partially automated installations and machines; recorded and downloadable software for determining safety-related characteristics of automated installations, partially automated installations and machines; predefined graphics and object libraries for use in control systems in industrial applications in the nature of downloadable data files and image files featuring graphs, charts and spreadsheets in the field of industrial process data; Recorded and downloadable computer application software for computers used to design and construct industrial manufacturing facilities, namely, software for reducing scheduling risks in order to ensure on-time start-ups, validating configuration data from detailed design through start-up, identification of configuration discrepancies, assigning discrepancies for resolution; recorded and downloadable software for capturing and archiving configuration data from automation and decision support systems, including configuration data graphics, programs, point databases, internal historians, trends, and function charts; recorded and downloadable software for inventory management of proprietary and non-proprietary control system hardware including I/O channels; recorded and downloadable software for assessing and reporting cybersecurity vulnerabilities of automated installations, partially automated installations and machines in the nature of proprietary and nonproprietary control system hardware and I/O channels, applications, operating systems and auxiliary devices by means of near real-time visibility into the health and availability of the safety instrumented systems (SIS), alarm management systems, allowing rapid identification of potential plant operation risks, analytics, alerts, and visualization features of safety instrumented function (SlF) performance management, Testing and maintenance management, demand on safety system rate tracking, safety related alarm status, safety system bypass management, safety and operational risk dashboards for improvement of plant safety and operational awareness of safety system performance, reduction of operational risk and process downtime due to shutdowns or turnarounds, and optimization of process plant resources; recorded and downloadable software for organizing configuration information by asset in a tree hierarchy; recorded and downloadable reference management software for identifying internal and external communications within automation systems; recorded and downloadable data relationship management software for visually mapping object interconnections and internal/external references; recorded and downloadable spare capacity management software for managing, reserving, and allocating spare system capacity; recorded and downloadable change tracking software for detecting changes to inventory, asset configuration, logical and graphical files; recorded and downloadable integrated workflow software having pre-defined workflows for security operations, namely, patch assessment, change testing, change implementation, configuration policy definition, asset disposal, and review/approval processes, and for initiating workflows based on configuration parameters to reduce personnel requirements for managing the configuration process; recorded and downloadable reporting software for generating configurable reports, namely, inventory, configuration detail, change history, and workflow; recorded and downloadable computer application software for computers in industrial manufacturing facilities, namely, software for use in documenting the databases of proprietary, as well as open architecture, industrial distributed control systems in a personal computer and a network-based server which provides searches and queries that enable process plant engineers, managers, and control room and security operations center operators to quickly and accurately locate manufacturing and process plant control systems related information, identify data integrity issues, map manufacturing and process plant equipment, access control system inventory, identify and allocate system capacity, discover unknown system modifications, track and manage process changes, support compliance with relevant regulations, and identifies changes between various versions of the same database; all of the above software for use in the fields of chemical production and processing, metals and mining handling, mineral processing, de-watering, smelting, refining and shipping, oil and gas production and operation, power generation, pulp and paper production and processing, excluding computer software for assessing the vulnerability of computer software and preventing intrusion into computer networks, web sites, and other computer systems and related computer hardware and for security, configuration auditing, and vulnerability scanning of computer networks Providing technical training regarding the design, implementation, and maintenance of computer software for monitoring, displaying, controlling, configuring, maintaining and operating automated installations, partially automated installations, equipment and predefined graphics and object libraries for use in control systems in industrial applications Consultation services, namely, providing technical advice regarding the design, implementation, and maintenance of computer software for monitoring, displaying, controlling, configuring, maintaining and operating automated installations, partially automated installations, equipment and predefined graphics and object libraries for use in control systems in industrial applications
|
5.
|
PAS ENSURING OT INTEGRITY
Numéro de série |
90044143 |
Statut |
Enregistrée |
Date de dépôt |
2020-07-09 |
Date d'enregistrement |
2021-09-28 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 41 - Éducation, divertissements, activités sportives et culturelles
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Downloadable and recorded computer application software for computers in industrial manufacturing facilities, namely, software for monitoring against cyber security threats; downloadable and recorded computer software for addressing cyber security plans, namely, asset inventory, configuration baseline, and change control management and monitoring of industrial control systems and automation systems; downloadable and recorded computer software for inventorying control system assets including customizable metadata fields for grouping assets by system, criticality, location, business unit, and company; downloadable and recorded computer software for documenting the operational and security configuration of assets including historical versioning for compliance or disaster recovery, and for configuring and applying configuration policies to maintain security or operational standards to minimize risk and maximize reliability of industrial control systems and automation systems; downloadable and recorded computer software for the detection of changes to inventory, asset configuration, logical and graphical files; downloadable and recorded computer software for determining configuration item risk and for triggering appropriate workflows for operations, compliance, alerting and incident response in industrial control systems and automation systems; downloadable and recorded computer software for pre-defined workflows for security operations, namely, patch assessment, change testing, change implementation, configuration policy definition, asset disposal, and review and approval processes; downloadable and recorded computer software for automatically initiating workflows based on configuration parameters to reduce personnel requirements for managing configuration processes; downloadable and recorded computer software for generating configurable security and compliance reports including inventory, configuration details, change history, and workflow documentation Training services in the field of design, implementation, and maintenance of computer software for monitoring, displaying, controlling, configuring, maintaining and operating automated installations, partially automated installations, equipment and predefined graphics and object libraries for use in control systems in industrial applications Consultation services, namely, providing technical advice regarding the design, implementation, and maintenance of computer software for monitoring, displaying, controlling, configuring, maintaining and operating automated installations, partially automated installations, equipment and predefined graphics and object libraries for use in control systems in industrial applications
|
6.
|
THE RIGHT CHOICE
Numéro de série |
88088843 |
Statut |
Enregistrée |
Date de dépôt |
2018-08-22 |
Date d'enregistrement |
2019-03-05 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
7.
|
DOC3000
Numéro de série |
88070919 |
Statut |
Enregistrée |
Date de dépôt |
2018-08-08 |
Date d'enregistrement |
2019-05-21 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer software, namely, software for documenting the databases of proprietary industrial distributed control systems, including searching and query functionality to locate control system related information, and to identify changes between various versions of the same database; computer software for industrial manufacturing and processing facilities, namely, software for monitoring and alarming industrial control systems and automation systems
|
8.
|
A ESPRIT
Numéro de série |
87582061 |
Statut |
Enregistrée |
Date de dépôt |
2017-08-24 |
Date d'enregistrement |
2020-04-21 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
9.
|
PROFITTURNING
Numéro de série |
87582105 |
Statut |
Enregistrée |
Date de dépôt |
2017-08-24 |
Date d'enregistrement |
2019-04-23 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
10.
|
DOC4000
Numéro de série |
87042361 |
Statut |
Enregistrée |
Date de dépôt |
2016-05-18 |
Date d'enregistrement |
2017-01-03 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer application software for industrial manufacturing and processing facilities, namely, software for monitoring and alarming industrial control systems and automation systems, all the aforementioned excluding software for directly controlling automated or partially automated machines or installations
|
11.
|
ECOSYS
Numéro de série |
86594760 |
Statut |
Enregistrée |
Date de dépôt |
2015-04-12 |
Date d'enregistrement |
2016-12-27 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Computer application software for enterprising planning and controls, namely, software for project cost controls; downloadable mobile applications for enterprise planning and controls, not for use in the management of direct costs and for profitability analysis in the field of health care [ Provision of web-based non-downloadable software for project management, project and operation budgeting and accounting; cloud computing featuring software for use in enterprise planning and controls; software as a service provider featuring software for use by industries that have any type of warehouse including food, pharmaceutical, storage and construction that lets them manage the business accounting and operation of such warehouses; cloud computing featuring software for use by industries in managing any type of warehouse, human resources, time and attendance and personnel evaluation tools; computer services, namely, acting as a software as a service provider in the field of enterprise project controls to host computer application software for the purpose of cost accounting, reporting, document repository, billing, timekeeping, human resources; design of computer software for enterprise planning and controls; technical support services, namely, troubleshooting of project cost control computer software problems ]
|
12.
|
VIDARA
Numéro de série |
79165453 |
Statut |
Enregistrée |
Date de dépôt |
2015-01-29 |
Date d'enregistrement |
2016-04-12 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 38 - Services de télécommunications
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Software for quality control in industrial production; computer programs for quality assurance in industrial production; computer operating programs, computers, interfaces for computers, memories for data processing equipment, blank optical data carriers, software for reliability and regression analysis, and software for statistical design of experiments, all of the foregoing for use in quality control and quality assurance in industrial production Computer aided transmission of messages and images; providing user access to computer programs in data networks; providing access to databases computer programming; consultancy in the field of computers, namely, computer consultation; preparation in the nature of development of data processing programs by order of third parties, namely, computer software development for others, developing customized software for others; computer programming for others in the fields of reliability and regression analysis; computer programming for others in the field of statistical design of experiments; installation and maintenance of software; updating of computer software for others; configuration in the nature of development of computer programs; recovery of computer data; leasing of computer software; technical advice relating to operation of computers; providing quality assurance services in the field of computer operations; quality control for others; quality management services, namely, technical planning relating to quality assurance in the field of computer operations
|
13.
|
PAS
Numéro de série |
86494104 |
Statut |
Enregistrée |
Date de dépôt |
2015-01-02 |
Date d'enregistrement |
2016-08-23 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Software for system integrity, alarm optimization, and control performance for the process industries; software for automating industrial control system asset inventory, configuration change detection, workflow management, and regulatory requirement compliance; software for aggregating, organizing, and presenting visualization of complex automation configurations, asset inventory management, management of change, configuration management, defect detection, integrated workflow process management, project Integrity and database reconciliation; software for data visualization, aggregating and contextualizing configuration databases, programs and user interfaces and simplifying the visualization and the management of information for an automated system in an industrial facility; software for managing the operating environment on process control LANs, monitoring changes and configuration consistency in hardware, firmware, and software, and analysis of software inventory; software for inventorying control system assets having customizable metadata fields that can be used to group assets; software for alarm optimization, high performance human machine interfaces, control loop performance, and boundary management; software for generating predefined graphics and object libraries for use in control systems in industrial applications to improve plant safety and reliability; all the aforementioned excluding software for directly controlling automated or partially automated machines or installations
|
14.
|
CYBER INTEGRITY
Numéro de série |
86468412 |
Statut |
Enregistrée |
Date de dépôt |
2014-12-02 |
Date d'enregistrement |
2017-05-02 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer application software for computers in industrial manufacturing facilities, namely, software for monitoring against cyber security threats; software for addressing cyber security plans, namely, asset inventory, configuration baseline, and change control management and monitoring of industrial control systems and automation systems; software for inventorying control system assets namely customizable metadata fields for grouping assets by system, criticality, location, business unit, and company; software for documenting the operational and security configuration of assets namely historical versioning for compliance or disaster recovery, and for configuring and applying configuration policies to maintain security or operational standards to minimize risk and maximize reliability of industrial control systems and automation systems; software for the detection of changes to inventory, asset configuration, logical and graphical files; software for determining configuration item risk and for triggering appropriate workflows for operations, compliance, alerting and incident response in industrial control systems and automation systems; software for pre-defined workflows for security operations, namely, patch assessment, change testing, change implementation, configuration policy definition, asset disposal, and review/approval processes; software for automatically initiating workflows based on configuration parameters to reduce personnel requirements for managing configuration processes; software for generating configurable security and compliance reports consisting of inventory, configuration details, change history, and workflow documentation
|
15.
|
SOLARA.MP
Numéro de série |
79153416 |
Statut |
Enregistrée |
Date de dépôt |
2014-05-23 |
Date d'enregistrement |
2015-02-17 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 38 - Services de télécommunications
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
[ Computer software to monitor and control factory manufacturing processes; industrial process control software; ] computer programs for quality assurance in industrial production, * except computer operating programs * [; computer operating programs; computers; interfaces for computers; memories for data processing equipment; electronic image scanning apparatus; blank optical data carriers ] Computer aided transmission of messages and images; providing user access to computer programs in data networks; providing access to databases; * all aforementioned services only related to computer application software for quality assurance in industrial production * and not related to operating system software * Computer programming; consultancy in the field of computers; preparation in the nature of development of data processing programs by order of third parties; installation and maintenance of software; updating of software; configuration in the nature of development of computer programs; recovery of computer data; leasing of computer software; technical advice relating to operation of computers, also in the field of quality assurance; quality control for others; quality management, namely, technical planning relating to quality assurance; * all aforementioned services only related to computer application software for quality assurance in industrial production * and not related to operating system software *
|
16.
|
M-QIS
Numéro de série |
79143995 |
Statut |
Enregistrée |
Date de dépôt |
2014-01-13 |
Date d'enregistrement |
2015-02-24 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 38 - Services de télécommunications
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Software for quality control in industrial production; computer programs for quality assurance in industrial production; computer operating programs; computers; interfaces for computers; memories for data processing equipment; electronic image scanning apparatus; blank optical data carriers Computer aided transmission of messages and images; providing user access to computer programs in data networks; providing access to databases Computer programming; consultancy in the field of computers; preparation in the nature of development of data processing programs by order of third parties; installation and maintenance of software; updating of software; configuration in the nature of development of computer programs; recovery of computer data; leasing of computer software; technical advice relating to operation of computers, also in the field of quality assurance; quality control for others; quality management, namely, technical planning relating to quality assurance
|
17.
|
O-QIS
Numéro de série |
79144401 |
Statut |
Enregistrée |
Date de dépôt |
2014-01-13 |
Date d'enregistrement |
2015-02-24 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 38 - Services de télécommunications
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Software for quality control in industrial production; computer programs for quality assurance in industrial production; computer operating programs; computers; interfaces for computers; memories for data processing equipment; electronic image scanning apparatus; blank optical data carriers Computer aided transmission of messages and images; providing user access to computer programs in data networks; providing access to databases Computer programming; consultancy in the field of computers; preparation in the nature of development of data processing programs by order of third parties; installation and maintenance of software; updating of software; configuration in the nature of development of computer programs; recovery of computer data; leasing of computer software; technical advice relating to operation of computers, also in the field of quality assurance; quality control for others; quality management, namely, technical planning relating to quality assurance
|
18.
|
Q-ARC
Numéro de série |
79144402 |
Statut |
Enregistrée |
Date de dépôt |
2014-01-13 |
Date d'enregistrement |
2015-02-24 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 38 - Services de télécommunications
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Software for quality control in industrial production; computer programs for quality assurance in industrial production; computer operating programs; computers; interfaces for computers; memories for data processing equipment; electronic image scanning apparatus; blank optical data carriers Computer aided transmission of messages and images; providing user access to computer programs in data networks; providing access to databases Computer programming; consultancy in the field of computers; preparation in the nature of development of data processing programs by order of third parties; installation and maintenance of software; updating of software; configuration in the nature of development of computer programs; recovery of computer data; leasing of computer software; technical advice relating to operation of computers, also in the field of quality assurance; quality control for others; quality management, namely, technical planning relating to quality assurance
|
19.
|
INTERGRAPH SMART
Numéro de série |
86049941 |
Statut |
Enregistrée |
Date de dépôt |
2013-08-28 |
Date d'enregistrement |
2015-01-06 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Computer software for the extraction, analysis, enhancement, reporting, management and visual representation of complex information; computer graphics software; computer software for integration and information management; computer software for infrastructure, workforce, assets and facilities management; computer software for the design, engineering, construction, production, operation, maintenance and lifecycle management of manufacturing, power and process plants, ships, offshore platforms and other marine structures; computer software for the management of images and geospatial data; computer software for geospatial mapping, earth imaging and developing and deploying spatial data infrastructure; computer software for geospatial intelligence exploitation and product generation; computer software for incident and response management; computer hardware; ruggedized computer hardware; computer peripherals; computer software for jail and records management, video enhancement and analysis, alarm display and common operational picture display; computer software for extracting, analyzing and reporting business intelligence data; computer software for the management of land information, outages and mobile workforces; instruction manuals sold as a unit with all foregoing software Computer software consultation, design, development, installation, configuration, integration, maintenance, upgrading, testing, repair, leasing for others; computer programming for others; computer system and software analysis of software performance, suitability and efficiency; computer systems consultation; computer system integration; computer network analysis, consultation, design, configuration, integration for others; web development services, namely, designing and implementing web applications for others; Consultation services and software development to create simulations and models, simulate business processes and visualize objects to enhance situational understanding; computer project management services; computer services, namely, data conversion of electronic information, data migration and data integration services; computer-aided design services for others; technical support services, namely, providing and supporting help desk services for others; computer hardware consultation, design, configuration, leasing for others; computer services, namely, network application software monitoring and testing of optimal software performance; network security services, namely, consultation, design, assessment, evaluation, selection, implementation, monitoring and management of network security hardware and software for others; maintenance of computer software for network security; computer system security monitoring services for others for technical purposes, namely, for evaluation of computer systems performance; computer services in the field of geospatial information systems, namely, geospatial data production services
|
20.
|
INTEGRITY
Numéro de série |
86047331 |
Statut |
Enregistrée |
Date de dépôt |
2013-08-25 |
Date d'enregistrement |
2014-11-11 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer application software for computers in industrial manufacturing facilities, namely, software for use in documenting the databases of proprietary industrial distributed control systems in a personal computer; it provides searches and queries that enable a process plant engineer to quickly and accurately locate control systems related information, identify data integrity issues, map process equipment, identify and allocate system capacity, discover unknown system modifications, track and manage process changes, and support OSHA 1910;119 and FDA CFR part 11 regulations; it also identifies changes between various versions of the same database
|
21.
|
PLANTSTATE SUITE
Numéro de série |
86047308 |
Statut |
Enregistrée |
Date de dépôt |
2013-08-25 |
Date d'enregistrement |
2014-04-01 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer application software for use in industrial manufacturing facilities, namely, software for data collection and manipulation, performance visualization and oAs to PlantState Suite; PlantState Suiteptimization, alarm system analysis and documentation, control loop performance, and multivariable process control design and optimization
|
22.
|
PROFITMILLING
Numéro de série |
85757889 |
Statut |
Enregistrée |
Date de dépôt |
2012-10-18 |
Date d'enregistrement |
2013-09-03 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
23.
|
PAS
Numéro de série |
85711643 |
Statut |
Enregistrée |
Date de dépôt |
2012-08-23 |
Date d'enregistrement |
2016-09-13 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Computer software development and configuration services and engineering services for the process control industry
|
24.
|
DATAPAGE+
Numéro de série |
85611553 |
Statut |
Enregistrée |
Date de dépôt |
2012-04-30 |
Date d'enregistrement |
2012-12-18 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Software for a coordinate measuring machine for measuring and inspecting geometric shapes of manufactured parts
|
25.
|
INBOUND
Numéro de série |
85502248 |
Statut |
Enregistrée |
Date de dépôt |
2011-12-22 |
Date d'enregistrement |
2013-10-22 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Automated process control system, namely, micro-processor based hardware and software used to monitor the status of industrial processes, namely, power generation, electrical distribution and oil and gas processing
|
26.
|
SPATIALANALYZER
Numéro de série |
77749656 |
Statut |
Enregistrée |
Date de dépôt |
2009-06-02 |
Date d'enregistrement |
2010-02-23 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer software for real time acquisition, analysis, and graphical representation of metrology system data
|
27.
|
NEW RIVER KINEMATICS
Numéro de série |
77748639 |
Statut |
Enregistrée |
Date de dépôt |
2009-06-01 |
Date d'enregistrement |
2010-02-23 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Computer software development and engineering consulting
|
28.
|
PROCELLA
Numéro de série |
79064785 |
Statut |
Enregistrée |
Date de dépôt |
2008-12-10 |
Date d'enregistrement |
2009-07-07 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs for monitoring and signaling of process conditions in industrial production
|
29.
|
DESTRA
Numéro de série |
79067401 |
Statut |
Enregistrée |
Date de dépôt |
2008-12-10 |
Date d'enregistrement |
2010-04-06 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer software to control quality in industrial production
|
30.
|
QS-STAT
Numéro de série |
79067588 |
Statut |
Enregistrée |
Date de dépôt |
2008-12-10 |
Date d'enregistrement |
2010-03-23 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 41 - Éducation, divertissements, activités sportives et culturelles
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Software in the field of quality control in industrial production Education and organization of seminars in the field of quality control of industrial production Technical consultancy services in the field of computers and software [ ; technical consultancy services in the field of quality assurance in industrial production ]
|
31.
|
Q-DAS
Numéro de série |
79067586 |
Statut |
Enregistrée |
Date de dépôt |
2008-12-10 |
Date d'enregistrement |
2010-03-23 |
Propriétaire |
Hexagon Technology Center GmbH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 41 - Éducation, divertissements, activités sportives et culturelles
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Software in the field of control and quality of industrial production Education and organization of seminars in the field of quality control of industrial production [ Management consulting, namely, quality control for others of industrial production ]
|
32.
|
EDGEFRONTIER
Numéro de série |
77254654 |
Statut |
Enregistrée |
Date de dépôt |
2007-08-14 |
Date d'enregistrement |
2008-10-21 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
- 09 - Appareils et instruments scientifiques et électriques
- 42 - Services scientifiques, technologiques et industriels, recherche et conception
|
Produits et services
Computer software for data aggregation and consolidation for use in the fields of computer monitoring, intelligence, defense, aviation, energy, environmental research, communications, software development, application development, engineering, information processing, and information technology; computer software for data aggregation, compilation, and display that incorporate sensors or sensor networks, access sensor or sensor network data, process sensor or sensor network data, filter sensor or sensor network data, align sensor or sensor network data, and transmit sensor or sensor network data in the fields of monitoring, intelligence, security, defense, energy, environmental, communications, software development, application development engineering, information processing, and information technology Computer systems and software consultation, research, design and development in the fields of intelligence and security, information processing, information technology and specialized technology applications; basic and applied research in computing and software products that incorporate sensors or sensor networks, process sensor or sensor network data, filter sensor or sensor network data, align sensor or sensor network data and transmit sensor or sensor network data; technical engineering and technology consultation services in the fields of intelligence and security, software development, application development, information processing and information technology
|
33.
|
ESPRIT
Numéro de série |
77050987 |
Statut |
Enregistrée |
Date de dépôt |
2006-11-27 |
Date d'enregistrement |
2010-04-20 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
34.
|
SOLIDMILL
Numéro de série |
77025249 |
Statut |
Enregistrée |
Date de dépôt |
2006-10-19 |
Date d'enregistrement |
2007-08-14 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
35.
|
SOLIDMILLTURN
Numéro de série |
77025306 |
Statut |
Enregistrée |
Date de dépôt |
2006-10-19 |
Date d'enregistrement |
2007-08-14 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
36.
|
E ESPRIT
Numéro de série |
77024985 |
Statut |
Enregistrée |
Date de dépôt |
2006-10-19 |
Date d'enregistrement |
2008-01-15 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
37.
|
SOLIDTURN
Numéro de série |
77025269 |
Statut |
Enregistrée |
Date de dépôt |
2006-10-19 |
Date d'enregistrement |
2007-08-14 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
38.
|
SOLIDWIRE
Numéro de série |
77025280 |
Statut |
Enregistrée |
Date de dépôt |
2006-10-19 |
Date d'enregistrement |
2008-04-08 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer programs recorded on data media (software) designed for use in construction and automated manufacturing (cad/cam)
|
39.
|
SMARTSKETCH
Numéro de série |
78036360 |
Statut |
Enregistrée |
Date de dépôt |
2000-11-22 |
Date d'enregistrement |
2002-06-11 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
COMPUTER GRAPHICS SOFTWARE AND SOFTWARE USER MANUALS SOLD AS A UNIT THEREWITH; COMPUTER SOFTWARE USED FOR COMPUTER-AIDED DESIGN IN THE FIELDS OF DRAFTING AND EDUCATION AND SOFTWARE USER MANUALS SOLD AS A UNIT THEREWITH; AND DOWNLOADABLE COMPUTER SOFTWARE USED FOR COMPUTER-AIDED DESIGN IN THE FIELDS OF DRAFTING AND EDUCATION AND SOFTWARE USER MANUALS SOLD AS A UNIT THEREWITH
|
40.
|
PC-DMIS
Numéro de série |
76160947 |
Statut |
Enregistrée |
Date de dépôt |
2000-11-07 |
Date d'enregistrement |
2002-03-26 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
computer software for a coordinate measuring machine for measuring and inspecting geometric shapes of manufactured parts
|
41.
|
DIRECT CAD
Numéro de série |
76146625 |
Statut |
Enregistrée |
Date de dépôt |
2000-10-13 |
Date d'enregistrement |
2004-05-11 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
Computer aided design software used for accessing specifications and tolerances of manufactured parts being inspected in the field of manufacturing
|
42.
|
XACTMEASURE
Numéro de série |
75552015 |
Statut |
Enregistrée |
Date de dépôt |
1998-09-10 |
Date d'enregistrement |
2000-10-31 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
COMPUTER SOFTWARE FOR MEASURING SYSTEMS, NAMELY, SOFTWARE FOR DETERMINING WHETHER PARTS HAVE BEEN MANUFACTURED ACCORDING TO SPECIFICATIONS
|
43.
|
THE NEXT GENERATION CAM
Numéro de série |
75513173 |
Statut |
Enregistrée |
Date de dépôt |
1998-07-06 |
Date d'enregistrement |
1999-10-26 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
COMPUTER SOFTWARE, NAMELY, COMPUTER-AIDED MANUFACTURING ("CAM") SOFTWARE FOR USE WITH MACHINING EQUIPMENT
|
44.
|
SMARTPLANT
Numéro de série |
75072375 |
Statut |
Enregistrée |
Date de dépôt |
1996-03-12 |
Date d'enregistrement |
1998-09-01 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
computer graphics software used in the plant design, process and building industries
|
45.
|
SMARTSKETCH
Numéro de série |
74594709 |
Statut |
Enregistrée |
Date de dépôt |
1994-11-03 |
Date d'enregistrement |
1995-10-10 |
Propriétaire |
HEXAGON TECHNOLOGY CENTER GMBH (Suisse)
|
Classes de Nice ? |
09 - Appareils et instruments scientifiques et électriques
|
Produits et services
computer graphics software that infers the user's intent based on the location of the cursor on the screen and instruction manuals sold therewith
|
|