A system, method and apparatus for configuring a person detection sensor. The person detection sensor may limit its transmissions in accordance with a pre-configured dwell time. The person detection sensor may receive a new dwell time from a personal communication device. When the new dwell time is received, it is stored in memory and is then used to regulate the number of transmissions of the person detection sensor in accordance with the new dwell time.
G06F 1/3231 - Surveillance de la présence, de l’absence ou du mouvement des utilisateurs
G06F 1/3228 - Surveillance d’exécution de tâches, p.ex. par utilisation de temporisations d’attente, de commandes d’arrêt ou de commandes d’attente
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
A system, method and apparatus for monitoring a barrier. The barrier sensor refrains from transmitting an alarm signal to a receiver when the barrier sensor determines that the barrier has been placed into an open position and that a human being is inside the premises in proximity to the human detection device. Further, the barrier sensor transmits an alarm signal to a receiver when the barrier sensor determines that the barrier has been moved from the open position and that a human being is not inside the premises in proximity to the barrier.
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
3.
SYSTEMS, METHODS AND APPARATUS FOR INTERACTING WITH A SECURITY SYSTEM USING A TELEVISION REMOTE CONTROL
A method and apparatus is described for interacting with a security system using a television remote control. Commands sent by the remote control are received by an auxiliary interface device, which then provides the commands to a security system controller either directly, via a local-area network, or via a wide-area network and server. Status and acknowledgement messages are transmitted from the security system controller to the auxiliary device, whereupon they are provided to and displayed by a television in the form of a security dashboard.
G06V 20/52 - Activités de surveillance ou de suivi, p.ex. pour la reconnaissance d’objets suspects
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/14 - Dispositions centrales pour la réception ou l'indication d'une alarme
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04N 21/238 - Interfaçage de la voie descendante du réseau de transmission, p.ex. adaptation du débit de transmission d'un flux vidéo à la bande passante du réseau; Traitement de flux multiplexés
H04N 21/41 - Structure de client; Structure de périphérique de client
H04N 21/431 - Génération d'interfaces visuelles; Rendu de contenu ou données additionnelles
H04N 21/436 - Interfaçage d'un réseau de distribution local, p.ex. communication avec un autre STB ou à l'intérieur de la maison
H04N 21/45 - Opérations de gestion réalisées par le client pour faciliter la réception de contenu ou l'interaction avec le contenu, ou pour l'administration des données liées à l'utilisateur final ou au dispositif client lui-même, p.ex. apprentissage des préféren
H04N 21/478 - Services additionnels, p.ex. affichage de l'identification d'un appelant téléphonique ou application d'achat
4.
METHOD AND APPARATUS FOR CONTROLLING A MOVABLE BARRIER SYSTEM
In one embodiment, a method conducted by a movable barrier gateway device is disclosed for controlling a movable barrier, comprising receiving, by a communication interface, a remote command from a remote control device to move the movable barrier, the remote command sent over a network, delaying transmission of a signal to a movable barrier controller to move the movable barrier, by a processor, for a predetermined time period after the remote command is received, detecting movement of the movable barrier within the predetermined time period by a barrier movement detector, and ignoring the remote command by the processor in response to detecting movement of the movable barrier within the predetermined time period.
Aspects of the present invention are directed towards identifying users in a room by an intelligent personal assistant for automatic control of certain devices controlled by the assistant. The assistant may have a retractable, reflector that is used to identify persons in the vicinity of the assistant when the retractable, reflector is in an extended position. The retractable, reflector may additionally be stowed inside the assistant to stop processing visual information in the vicinity of the assistant.
Systems, methods and apparatus are described to selectively monitor a portion of a premises by a security system. A security system may contain a central security monitoring device in communication with a plurality of security sensors, and central security monitoring device may receive a command to actively monitor a first portion of a premises monitored by the security system, and in response to receiving the command, cause one or more security alerts to occur when an alarm signal is received from a security sensor located in the first portion of the premises, while ignoring alarm signals received from security sensors located in other portions of the premises.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
Systems, methods and apparatus are described for propagating a primary alert from a premises monitoring system or device by a home entertainment device. A premises monitoring system or device, such as a security system, smoke detector, fire detector, carbon monoxide detector, baby monitor, smart speaker, etc., emit a primary alert when a predetermined event or condition occurs associated with a monitored premises. An indication of the primary alert is received by one or more home entertainment devices, and at least one of the home entertainment devices causes a secondary alert to occur, for example, an audio notification and/or a visual notification from the at least one home entertainment device.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
G08B 21/02 - Alarmes pour assurer la sécurité des personnes
G08B 29/12 - Vérification intermittente des systèmes de signalisation ou d'alarme
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
The present disclosure relates to a software application used on mobile devices that enables professional monitoring services to DIY monitoring systems that lack an ability to communicate with remote monitoring facilities. In one embodiment, alert messages are transmitted by a monitoring system gateway and received by a personal communication device. The alert messages indicate occurrences of events at a monitored premises. When the software application determines that an incoming communication is an alert message, an indication is provided to a user of the mobile device that an event has occurred at the premises, and giving the user a predetermined time period in which to respond to the indication. If the user fails to respond to the indication within a predetermined time period, a message is transmitted to a remote monitoring facility, alerting the remote monitoring facility of the event.
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
G08B 25/01 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/08 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant les lignes de communication
10.
ADJUSTABLE DWELL TIME FOR MOTION DETECTOR BASED ON ACTIVITY
A motion detector that can automatically adjust a dwell time used by the motion detector to prevent unnecessary transmissions as an activity level of an area increases or decreases. The motion detector determines the activity level in the area and if the activity level is increasing, the dwell time is reduced and vice-versa.
G01J 5/00 - Pyrométrie des radiations, p.ex. thermométrie infrarouge ou optique
G01J 5/02 - Pyrométrie des radiations, p.ex. thermométrie infrarouge ou optique - Détails structurels
G08B 13/19 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes détecteurs de radiations infrarouges
11.
METHOD AND APPARATUS FOR LOCATION-BASED, AUTOMATED CONTROL OF ELECTRONIC DEVICES
Systems, methods and apparatus are described for automatically performing home or business-based actions. A predefined geographic boundary may be defined around a home or a business. When a personal communication device inside a vehicle crosses a boundary of the predefined geographic boundary, the personal communication device sends a short range message to a point-to-point transceiver in the vehicle, and the point-to-point transceiver sends a signal directly to a controller in the home or business to automatically perform the one or more home or business-based actions.
H04W 4/021 - Services concernant des domaines particuliers, p.ex. services de points d’intérêt, services sur place ou géorepères
H04W 4/02 - Services utilisant des informations de localisation
H04W 4/80 - Services utilisant la communication de courte portée, p.ex. la communication en champ proche, l'identification par radiofréquence ou la communication à faible consommation d’énergie
H04W 84/12 - Réseaux locaux sans fil [WLAN Wireless Local Area Network]
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
Described is a security sensor comprising two or more sub-sensors for use in a variety of installations where different magnetic fields may be experienced by the security sensor as a result of the variety of installations. One of the sub-sensors may have a low magnetic sensitivity while the other sub-sensor may have a much higher sensitivity to magnetic fields. In operation, one or both sub-sensors are used to determine if a door or a window has been opened.
G08B 13/24 - Déclenchement électrique par une interférence avec la distribution d'un champ électromagnétique
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G01R 33/07 - Mesure de la direction ou de l'intensité de champs magnétiques ou de flux magnétiques en utilisant des dispositifs galvano-magnétiques des dispositifs à effet Hall
G01B 7/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques électriques ou magnétiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
G01R 33/00 - Dispositions ou appareils pour la mesure des grandeurs magnétiques
G01R 33/02 - Mesure de la direction ou de l'intensité de champs magnétiques ou de flux magnétiques
G08B 21/22 - Alarmes de situation réagissant à la présence ou à l'absence de personnes
A method and apparatus for monitoring a door or a window is disclosed. In one embodiment, a method is described, comprising receiving, by a processor, an electronic signal from a motion sensor in response to movement of the door or window, determining a direction of movement of the door or window from the electronic signal by the processor, comparing the direction of movement to a predetermined direction by the processor, detecting, by the processor, an alarm condition of the door or window if the electronic signal indicates that the door or window is being opened, and transmitting, by a transmitter coupled to the processor, an alarm signal when the alarm condition has been detected.
Embodiments of a central security monitoring device for reducing incidences of false alarms in a security system is disclosed. In one embodiment, a method is described, comprising receiving an alarm signal from an occupancy sensor via a receiver, receiving a second alarm signal from a barrier alarm device after receiving the alarm signal, determining, by a processor, an elapsed time from when the alarm signal from the occupancy sensor was received to when the second alarm signal from the barrier alarm device was received, transmitting, by the processor via a network interface, a message to a personal communication device indicating that a false alarm has occurred when the elapsed time is less than the predetermined time.
G08B 29/18 - Prévention ou correction d'erreurs de fonctionnement
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
G08B 3/10 - Systèmes de signalisation audible; Systèmes d'appel sonore de personnes utilisant une transmission électromagnétique
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
A method and apparatus for detecting remote network devices. In one embodiment, the method comprises detecting an event and a) transmitting a message requesting a response from one or more remote network devices, the message comprising a first network identification code, and b) determining whether a response to the message has been received, the response transmitted by a remote network device after receiving the message and determining that the first network identification code matches a second network identification code stored within the remote network device, the response comprising identification information of the remote network device. If c) a response has not been received, terminating the method for detecting remote network devices if a pre-determined time period has elapsed since transmitting the message. If d) a response has been received, storing identification information associated with the responding remote network device and repeating steps a-d until no further responses are received.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
16.
METHOD AND APPARATUS FOR REDUCING POWER CONSUMPTION IN A HARDWARE TOKEN READER
A method and apparatus for reducing power consumption of a battery-powered, hardware token reader. A secure access module within the battery-powered hardware token reader is disabled by a main processor while the battery-powered hardware token reader is in a low-power mode of operation. The main processor also enables communications directly with a tag transceiver and then places itself into a sleep state. When a hardware token is placed within the range of the tag transceiver, the tag transceiver wakes the main processor, and the main processor, in turn, powers the secure access module on and initializes it so that the main processor can read information stored on the hardware token via the secure access module.
G06F 1/3287 - Gestion de l’alimentation, c. à d. passage en mode d’économie d’énergie amorcé par événements Économie d’énergie caractérisée par l'action entreprise par la mise hors tension d’une unité fonctionnelle individuelle dans un ordinateur
G06K 7/10 - Méthodes ou dispositions pour la lecture de supports d'enregistrement par radiation corpusculaire
An electronic barrier alarm sensor having a flexible sensing device. The sensor may be mounted to a door, door frame, window, window frame, object or wall to detect when a door or window has been opened, that an object has been moved or to detect the presence of an animal. The flexible sensing device comprises one or more attributes that change as the flexible sensing device is bent, or unbent, by operation of a door, window, removal of an object, or the presence of an animal. Based on the changes, the electronic barrier alarm sensor may transmit an alarm signal when one or more measured values of the one or more attributes changes by more than one or more predetermined amounts.
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G01D 5/16 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens électriques ou magnétiques influençant la valeur d'un courant ou d'une tension en faisant varier la résistance
G01D 5/20 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens électriques ou magnétiques influençant la valeur d'un courant ou d'une tension en faisant varier l'inductance, p.ex. une armature mobile
G01D 5/24 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens électriques ou magnétiques influençant la valeur d'un courant ou d'une tension en faisant varier la capacité
18.
Method and apparatus for performing timed functions in a wireless electronic device
Methods and apparatus for performing timed functions in battery-powered, wireless electronic devices, such as sensors or control modules. Such electronic devices comprise a main processor and a co-processor. When the main processor enters a quiescent state in order to preserve battery life, one or more timed functions are transferred from the main processor to the co-processor just before the main processor enters the quiescent state. When the co-processor determines that it is time to perform the timed function, the co-processor wakes the main processor in order for the main processor to perform the timed function.
G06F 1/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES - Détails non couverts par les groupes et
G06F 1/3293 - Gestion de l’alimentation, c. à d. passage en mode d’économie d’énergie amorcé par événements Économie d’énergie caractérisée par l'action entreprise par transfert vers un processeur plus économe en énergie, p.ex. vers un sous-processeur
Described is a security sensor comprising two or more sub-sensors for use in a variety of installations where different magnetic fields may be experienced by the security sensor as a result of the variety of installations. One of the sub-sensors may have a low magnetic sensitivity while the other sub-sensor may have a much higher sensitivity to magnetic fields. In operation, one or both sub-sensors are used to determine if a door or a window has been opened.
G08B 13/24 - Déclenchement électrique par une interférence avec la distribution d'un champ électromagnétique
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G01R 33/07 - Mesure de la direction ou de l'intensité de champs magnétiques ou de flux magnétiques en utilisant des dispositifs galvano-magnétiques des dispositifs à effet Hall
G01B 7/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques électriques ou magnétiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
G01R 33/00 - Dispositions ou appareils pour la mesure des grandeurs magnétiques
G01R 33/02 - Mesure de la direction ou de l'intensité de champs magnétiques ou de flux magnétiques
G08B 21/22 - Alarmes de situation réagissant à la présence ou à l'absence de personnes
G08B 29/20 - Etalonnage, y compris les dispositions d'auto-étalonnage
20.
User-configurable person detection system, method and apparatus
A system, method and apparatus for configuring a person detection sensor. The person detection sensor may limit its transmissions in accordance with a pre-configured dwell time. The person detection sensor may receive a new dwell time from a personal communication device. When the new dwell time is received, it is stored in memory and is then used to regulate the number of transmissions of the person detection sensor in accordance with the new dwell time.
G06F 1/32 - Moyens destinés à économiser de l'énergie
G06F 1/3231 - Surveillance de la présence, de l’absence ou du mouvement des utilisateurs
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
G06F 1/3228 - Surveillance d’exécution de tâches, p.ex. par utilisation de temporisations d’attente, de commandes d’arrêt ou de commandes d’attente
21.
Adjustable dwell time for motion detector based on activity
A motion detector that can automatically adjust a dwell time used by the motion detector to prevent unnecessary transmissions as an activity level of an area increases or decreases. The motion detector determines the activity level in the area and if the activity level is increasing, the dwell time is reduced and vice-versa.
G01J 5/00 - Pyrométrie des radiations, p.ex. thermométrie infrarouge ou optique
G01J 5/02 - Pyrométrie des radiations, p.ex. thermométrie infrarouge ou optique - Détails structurels
G08B 13/19 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes détecteurs de radiations infrarouges
A system, method and apparatus for monitoring a barrier. The barrier sensor refrains from transmitting an alarm signal to a receiver when the barrier sensor determines that the barrier has been placed into an open position and that a human being is inside the premises in proximity to the human detection device. Further, the barrier sensor transmits an alarm signal to a receiver when the barrier sensor determines that the barrier has been moved from the open position and that a human being is not inside the premises in proximity to the barrier.
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
A method, apparatus and system is disclosed for automatically opening and closing a garage door without user intervention. A vehicle-mounted mobile transmitter autonomously and continuously transmits a repeating signal pattern when power is applied to the transmitter as a vehicle is started by a user. A movable barrier gateway device receives the signals from the mobile transmitter and compares an identification code contained in each of the signals to an identification code stored in memory. When a match is found, the movable barrier gateway device sends a signal to a movable barrier controller to open the garage door, and keep the door open as long as the movable barrier gateway continues to receive the signals from the mobile transmitter.
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
E05F 15/668 - Mécanismes pour battants mus par une force motrice utilisant des actionneurs électriques utilisant des électromoteurs rotatifs pour battants à coulissement vertical pour battants s’ouvrant de haut en bas
E05F 15/77 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique utilisant une commande sans fil
E05F 15/76 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique sensible au déplacement ou à la présence de personnes ou d’objets sensible à des dispositifs portés par des personnes ou des objets, p.ex. aimants ou miroirs
24.
Method, system and apparatus for electronic device enrollment
A system, method and apparatus for automatically enrolling wireless end devices with a base station and/or other device or system. A wireless end device is scanned using a smart phone's native capabilities, without the use of a downloadable, third party app. Information from the scan indicates the name of the base station to which enrollment is desired. The base station name is used in an mDNS request in order to determine a local IP address of the base station. When the IP address is returned to the local, wireless communication device, the wireless communication device sends an HTTP GET message comprising attributes of the end device. The base station receives the HTTP GET message and enrolls the wireless end device with the base station. The base station my further alert another base station, system, server or other entity of the enrollment. The base station may then send the local, wireless communication device a web page indicating that the wireless end device was successfully enrolled with the base station and/or other base station, system, server or entity.
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
H04L 61/4511 - Répertoires de réseau; Correspondance nom-adresse en utilisant des protocoles normalisés d'accès aux répertoires en utilisant le système de noms de domaine [DNS]
H04L 67/02 - Protocoles basés sur la technologie du Web, p.ex. protocole de transfert hypertexte [HTTP]
H04W 8/22 - Traitement ou transfert des données du terminal, p.ex. statut ou capacités physiques
H04W 60/00 - Rattachement à un réseau, p.ex. enregistrement; Suppression du rattachement à un réseau, p.ex. annulation de l'enregistrement
H04W 84/12 - Réseaux locaux sans fil [WLAN Wireless Local Area Network]
H04W 84/18 - Réseaux auto-organisés, p.ex. réseaux ad hoc ou réseaux de détection
A smart thermostat for controlling the ambient air temperature in a first area when the smart thermostat is located in a second area. One or more desired setpoint temperatures are changed automatically by the smart thermostat based on one or more setpoint modification factors, such as the time of day, current season, location, orientation and present and future weather conditions.
G05B 19/042 - Commande à programme autre que la commande numérique, c.à d. dans des automatismes à séquence ou dans des automates à logique utilisant des processeurs numériques
A method and apparatus for monitoring a door or a window is disclosed. In one embodiment, a method is described, comprising receiving, by a processor, an electronic signal from a motion sensor in response to movement of the door or window, determining a direction of movement of the door or window from the electronic signal by the processor, comparing the direction of movement to a predetermined direction by the processor, detecting, by the processor, an alarm condition of the door or window if the electronic signal indicates that the door or window is being opened, and transmitting, by a transmitter coupled to the processor, an alarm signal when the alarm condition has been detected.
Systems, methods and apparatus are described to selectively monitor a portion of a premises by a security system. A security system may contain a central security monitoring device in communication with a plurality of security sensors, and central security monitoring device may receive a command to actively monitor a first portion of a premises monitored by the security system, and in response to receiving the command, cause one or more security alerts to occur when an alarm signal is received from a security sensor located in the first portion of the premises, while ignoring alarm signals received from security sensors located in other portions of the premises.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
Aspects of the present invention are directed towards a more natural way to interact with an intelligent personal assistant. An intelligent personal assistant comprises a camera that provides images of an area surrounding the assistant. The assistant monitors images provided by the camera to determine when a user is addressing the assistant. When voice input is received after determining that a user is addressing the assistant, the assistant understands that the voice input is intended for the assistant, and acts on the voice input to respond to the user.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
G06N 5/02 - Représentation de la connaissance; Représentation symbolique
G02B 17/06 - Systèmes catoptriques, p.ex. systèmes redressant et renversant une image utilisant uniquement des miroirs
G06N 3/008 - Vie artificielle, c. à d. agencements informatiques simulant la vie fondés sur des entités physiques commandées par une intelligence simulée de manière à reproduire des formes de vie intelligentes, p.ex. fondés sur des robots reproduisant les animaux ou les humains dans leur apparence ou leur comportement
The present disclosure relates to a software application used on mobile devices that enables professional monitoring services to DIY monitoring systems that lack an ability to communicate with remote monitoring facilities. In one embodiment, alert messages are transmitted by a monitoring system gateway and received by a personal communication device. The alert messages indicate occurrences of events at a monitored premises. When the software application determines that an incoming communication is an alert message, an indication is provided to a user of the mobile device that an event has occurred at the premises, and giving the user a predetermined time period in which to respond to the indication. If the user fails to respond to the indication within a predetermined time period, a message is transmitted to a remote monitoring facility, alerting the remote monitoring facility of the event.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
G08B 25/01 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission
G08B 25/08 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant les lignes de communication
30.
METHOD AND APPARATUS FOR DISARMING A SECURITY SYSTEM
Methods and apparatus are described for automatically disarming a security system. For example, a method for automatically disarming a security system is described, comprising determining, by a personal communication device, when a person is in proximity to the person's home or business and, in response to determining that the person is in proximity to the person's home or business, transmitting a disarm command by the personal communication device to a security controller for the security controller to disarm the security system.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/08 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant les lignes de communication
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
31.
Smart thermostat for controlling adjacent room temperatures
A smart thermostat for controlling the ambient air temperature in a first area when the smart thermostat is located in a second area. One or more desired setpoint temperatures are changed automatically by the smart thermostat based on one or more setpoint modification factors, such as the time of day, current season, location, orientation and present and future weather conditions.
F24F 11/00 - Aménagements de commande ou de sécurité
G05B 19/042 - Commande à programme autre que la commande numérique, c.à d. dans des automatismes à séquence ou dans des automates à logique utilisant des processeurs numériques
A remote-controlled switch cover assembly is described for converting an existing rocker switch into a remote-controlled switch. The remote-controlled switch cover assembly receives a wireless signal to actuate the existing rocker switch and, in response, activates an electric motor that causes a gear train to turn in a first direction. This causes a wiper to engage an under-surface of a tilt plate located above the existing rocker switch and, in response, an opposing end of the tit plate depresses the existing rocker switch.
H01H 23/24 - Interrupteurs à bascule ou à berceau, c. à d. interrupteurs caractérisés en ce qu'ils sont actionnés par basculement d'un organe de l'interrupteur en forme de bouton à bascule à deux positions de travail
A person-detection device that automatically configures itself as a motion sensor or an occupancy sensor upon receiving a command from a home security panel or home automation hub.
Systems, methods and apparatus are described for reducing the occurrence of false alarms by determining the identify of people, typically via their mobile devices, in or near a monitored premises. A security system employing the embodiments described herein monitors a home or business to determine the presence of mobile devices in or near the premises, and determines whether such mobile devices are authorized, or not, to enter the premises after the security system has been armed. When an intrusion is detected, the security system determines whether any unauthorized mobile devices are present in or near the premises. If so, one or more escalated alarm responses are initiated by the security system. If no unauthorized mobile devices are in or near the premises when intrusion is detected, the security system ignores the intrusion and refrains from performing the escalated alarm responses.
G08B 29/16 - Systèmes de signalisation ou d'alarme de sécurité, p.ex. systèmes redondants
G08B 26/00 - Systèmes d'alarme dans lesquels des sous-stations sont interrogées successivement par une station centrale
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 3/10 - Systèmes de signalisation audible; Systèmes d'appel sonore de personnes utilisant une transmission électromagnétique
H04W 4/80 - Services utilisant la communication de courte portée, p.ex. la communication en champ proche, l'identification par radiofréquence ou la communication à faible consommation d’énergie
Systems, methods and apparatus are described to selectively monitor a portion of a premises by a security system. A security system may contain a central security monitoring device in communication with a plurality of security sensors, and central security monitoring device may receive a command to actively monitor a first portion of a premises monitored by the security system, and in response to receiving the command, cause one or more security alerts to occur when an alarm signal is received from a security sensor located in the first portion of the premises, while ignoring alarm signals received from security sensors located in other portions of the premises.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
Methods and apparatus for performing timed functions in battery-powered, wireless electronic devices, such as sensors or control modules. Such electronic devices comprise a main processor and a co-processor. When the main processor enters a quiescent state in order to preserve battery life, one or more timed functions are transferred from the main processor to the co-processor just before the main processor enters the quiescent state. When the co-processor determines that it is time to perform the timed function, the co-processor wakes the main processor in order for the main processor to perform the timed function.
G06F 1/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES - Détails non couverts par les groupes et
G06F 1/3293 - Gestion de l’alimentation, c. à d. passage en mode d’économie d’énergie amorcé par événements Économie d’énergie caractérisée par l'action entreprise par transfert vers un processeur plus économe en énergie, p.ex. vers un sous-processeur
An electronic barrier alarm sensor having a flexible sensing device. The sensor may be mounted to a door, door frame, window, window frame, object or wall to detect when a door or window has been opened, that an object has been moved or to detect the presence of an animal. The flexible sensing device comprises one or more attributes that change as the flexible sensing device is bent, or unbent, by operation of a door, window, removal of an object, or the presence of an animal. Based on the changes, the electronic barrier alarm sensor may transmit an alarm signal when one or more measured values of the one or more attributes changes by more than one or more predetermined amounts.
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G01D 5/16 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens électriques ou magnétiques influençant la valeur d'un courant ou d'une tension en faisant varier la résistance
G01D 5/20 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens électriques ou magnétiques influençant la valeur d'un courant ou d'une tension en faisant varier l'inductance, p.ex. une armature mobile
G01D 5/24 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens électriques ou magnétiques influençant la valeur d'un courant ou d'une tension en faisant varier la capacité
A system, method and apparatus for detecting the presence of a person in an area monitored by an electronic person detector that may operate both as a security motion sensor and a home automation occupancy sensor.
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
39.
METHOD AND APPARATUS OF POWERING AN ELECTRONIC DEVICE USING A REMOVABLE POWER SUPPLY
An electronic device lacking an internal power supply comprises electronic circuitry, an external power adapter having an input connector for receiving AC power from a conventional AC power outlet and for providing a low-voltage output signal to an output connector, and a first port electronically coupled to the electronic circuitry for receiving the low-voltage output signal from the output connector of the power adapter and for providing the low-voltage output signal to the electronic circuitry.
A light switch cover for converting a standard toggle switch into a remote-controlled toggle switch. In one embodiment, the light switch cover comprises a switch toggle member for acting upon a toggle light switch member to place the toggle light switch member into either an on position or an off position, a gear train coupled to the switch toggle member that causes the switch toggle member to act upon the toggle light switch member, an electric motor, coupled to the gear train, for driving the gear train in a first direction to cause the switch toggle member to place the toggle light switch member into the on position, and for driving the gear train in a second direction to cause the switch toggle member to place the toggle light switch member into the off position, motor driving circuitry coupled to the electric motor, a receiver for receiving signals that cause actuation of the standard toggle switch, and processing circuitry coupled to the receiver and the motor driving circuitry that causes the light switch cover to receive a signal to turn the toggle switch into the on position and, in response, causing the electric motor to rotate in a direction to cause the switch toggle member to place the toggle light switch member into the on position.
A method and apparatus is described for interacting with a security system using a television remote control. Commands sent by the remote control are received by an auxiliary interface device, which then provides the commands to a security system controller either directly, via a local-area network, or via a wide-area network and server. Status and acknowledgement messages are transmitted from the security system controller to the auxiliary device, whereupon they are provided to and displayed by a television in the form of a security dashboard.
H04N 21/422 - Périphériques d'entrée uniquement, p.ex. système de positionnement global [GPS]
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/14 - Dispositions centrales pour la réception ou l'indication d'une alarme
H04N 21/41 - Structure de client; Structure de périphérique de client
H04N 21/478 - Services additionnels, p.ex. affichage de l'identification d'un appelant téléphonique ou application d'achat
G06V 20/52 - Activités de surveillance ou de suivi, p.ex. pour la reconnaissance d’objets suspects
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04N 21/238 - Interfaçage de la voie descendante du réseau de transmission, p.ex. adaptation du débit de transmission d'un flux vidéo à la bande passante du réseau; Traitement de flux multiplexés
H04N 21/431 - Génération d'interfaces visuelles; Rendu de contenu ou données additionnelles
H04N 21/436 - Interfaçage d'un réseau de distribution local, p.ex. communication avec un autre STB ou à l'intérieur de la maison
H04N 21/45 - Opérations de gestion réalisées par le client pour faciliter la réception de contenu ou l'interaction avec le contenu, ou pour l'administration des données liées à l'utilisateur final ou au dispositif client lui-même, p.ex. apprentissage des préféren
42.
Method and apparatus for performing timed functions in a wireless electronic device
Methods and apparatus for performing timed functions in battery-powered, wireless electronic devices, such as sensors or control modules. Such electronic devices comprise a main processor and a co-processor. When the main processor enters a quiescent state in order to preserve battery life, one or more timed functions are transferred from the main processor to the co-processor just before the main processor enters the quiescent state. When the co-processor determines that it is time to perform the timed function, the co-processor wakes the main processor in order for the main processor to perform the timed function.
G06F 1/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES - Détails non couverts par les groupes et
G06F 1/3293 - Gestion de l’alimentation, c. à d. passage en mode d’économie d’énergie amorcé par événements Économie d’énergie caractérisée par l'action entreprise par transfert vers un processeur plus économe en énergie, p.ex. vers un sous-processeur
A system, method and apparatus for configuring a person detection sensor. The person detection sensor may limit its transmissions in accordance with a pre-configured dwell time. The person detection sensor may receive a new dwell time from a personal communication device. When the new dwell time is received, it is stored in memory and is then used to regulate the number of transmissions of the person detection sensor in accordance with the new dwell time.
G06F 1/32 - Moyens destinés à économiser de l'énergie
G06F 1/3231 - Surveillance de la présence, de l’absence ou du mouvement des utilisateurs
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
G06F 1/3228 - Surveillance d’exécution de tâches, p.ex. par utilisation de temporisations d’attente, de commandes d’arrêt ou de commandes d’attente
A system, method and apparatus for detecting the presence of a person in an area monitored by an electronic person detector that may operate both as a security motion sensor and a home automation occupancy sensor.
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
45.
Method, system and apparatus for electronic device enrollment
A system, method and apparatus for automatically enrolling wireless end devices with a base station and/or other device or system. A wireless end device is scanned using a smart phone's native capabilities, without the use of a downloadable, third party app. Information from the scan indicates the name of the base station to which enrollment is desired. The base station name is used in an mDNS request in order to determine a local IP address of the base station. When the IP address is returned to the local, wireless communication device, the wireless communication device sends an HTTP GET message comprising attributes of the end device. The base station receives the HTTP GET message and enrolls the wireless end device with the base station. The base station my further alert another base station, system, server or other entity of the enrollment. The base station may then send the local, wireless communication device a web page indicating that the wireless end device was successfully enrolled with the base station and/or other base station, system, server or entity.
H04L 61/4511 - Répertoires de réseau; Correspondance nom-adresse en utilisant des protocoles normalisés d'accès aux répertoires en utilisant le système de noms de domaine [DNS]
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
H04L 61/4541 - Répertoires pour la découverte de services
H04W 60/00 - Rattachement à un réseau, p.ex. enregistrement; Suppression du rattachement à un réseau, p.ex. annulation de l'enregistrement
H04L 67/02 - Protocoles basés sur la technologie du Web, p.ex. protocole de transfert hypertexte [HTTP]
H04W 8/22 - Traitement ou transfert des données du terminal, p.ex. statut ou capacités physiques
H04W 84/18 - Réseaux auto-organisés, p.ex. réseaux ad hoc ou réseaux de détection
The present disclosure provides an illumination feature for an electronic device. A light cone is used to direct light from a light emitter to an interior surface of a housing of an electronic device in one of a variety of geometric, alphabetic, or numerical designs.
F21V 3/02 - Globes; Vasques; Verres de protection caractérisés par leur forme
F21V 23/04 - Agencement des éléments du circuit électrique dans ou sur les dispositifs d’éclairage les éléments étant des interrupteurs
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
F21V 33/00 - Combinaisons structurales de dispositifs d'éclairage avec d'autres objets, non prévues ailleurs
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
A method, system, and apparatus for temporarily disarming a barrier alarm in a security system. In one embodiment, a method is described, performed by a barrier alarm in communication with a central controller, where the barrier alarm receives a first signal from a user interface on the barrier alarm to disarm the barrier alarm, disables the barrier alarm in response to receiving the indication, and re-arming the barrier alarm upon receipt of a second signal from a sensor that forms part of the barrier alarm.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
Aspects of the present invention are directed towards identifying users in a room by an intelligent personal assistant for automatic control of certain devices controlled by the assistant. The assistant may have a retractable, reflector that is used to identify persons in the vicinity of the assistant when the retractable, reflector is in an extended position. The retractable, reflector may additionally be stowed inside the assistant to stop processing visual information in the vicinity of the assistant.
G06F 3/00 - Dispositions d'entrée pour le transfert de données destinées à être traitées sous une forme maniable par le calculateur; Dispositions de sortie pour le transfert de données de l'unité de traitement à l'unité de sortie, p.ex. dispositions d'interface
A method and apparatus for monitoring a door or a window is disclosed. In one embodiment, a method is described, comprising receiving, by a processor, an electronic signal from a motion sensor in response to movement of the door or window, determining a direction of movement of the door or window from the electronic signal by the processor, comparing the direction of movement to a predetermined direction by the processor, detecting, by the processor, an alarm condition of the door or window if the electronic signal indicates that the door or window is being opened, and transmitting, by a transmitter coupled to the processor, an alarm signal when the alarm condition has been detected.
A method and apparatus is described for providing energy system status information. A status indication device may be mounted near an entry door for determining when an individual is about to leave an area. When the status indication device determines that an individual is about to leave an area, it displays an energy status to the individual, so that the individual can decide whether to place energy-consuming devices in a conservation mode of operation.
H02J 13/00 - Circuits pour pourvoir à l'indication à distance des conditions d'un réseau, p.ex. un enregistrement instantané des conditions d'ouverture ou de fermeture de chaque sectionneur du réseau; Circuits pour pourvoir à la commande à distance des moyens de commutation dans un réseau de distribution d'énergie, p.ex. mise en ou hors circuit de consommateurs de courant par l'utilisation de signaux d'impulsion codés transmis par le réseau
G05B 15/02 - Systèmes commandés par un calculateur électriques
Embodiments of a central security monitoring device for reducing incidences of false alarms in a security system is disclosed. In one embodiment, a method is described, comprising receiving an alarm signal from an occupancy sensor via a receiver, receiving a second alarm signal from a barrier alarm device after receiving the alarm signal, determining, by a processor, an elapsed time from when the alarm signal from the occupancy sensor was received to when the second alarm signal from the barrier alarm device was received, transmitting, by the processor via a network interface, a message to a personal communication device indicating that a false alarm has occurred when the elapsed time is less than the predetermined time.
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 29/18 - Prévention ou correction d'erreurs de fonctionnement
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
G08B 3/10 - Systèmes de signalisation audible; Systèmes d'appel sonore de personnes utilisant une transmission électromagnétique
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
A method, system, and apparatus for programming a sensor at a customer location is disclosed. A defective sensor at a customer location is replaced by a new sensor that is programmed at the customer location using a programming device or a transducer coupled to a computing device. The new sensor is programming using the sensor's detector normally used to sense a change in a magnetic field, an RF signal, infra-red light, or some other emission or property.
The present disclosure relates to a software application used on mobile devices that enables professional monitoring services to DIY monitoring systems that lack an ability to communicate with remote monitoring facilities. In one embodiment, alert messages are transmitted by a monitoring system gateway and received by a personal communication device. The alert messages indicate occurrences of events at a monitored premises. When the software application determines that an incoming communication is an alert message, an indication is provided to a user of the mobile device that an event has occurred at the premises, and giving the user a predetermined time period in which to respond to the indication. If the user fails to respond to the indication within a predetermined time period, a message is transmitted to a remote monitoring facility, alerting the remote monitoring facility of the event.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
G08B 25/01 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission
G08B 25/08 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant les lignes de communication
54.
Method and apparatus for disarming a security system
Methods and apparatus are described for automatically disarming a security system. For example, a method for automatically disarming a security system is described, comprising determining, by a personal communication device, when a person is in proximity to the person's home or business and, in response to determining that the person is in proximity to the person's home or business, transmitting a disarm command by the personal communication device to a security controller for the security controller to disarm the security system.
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/08 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant les lignes de communication
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
A sensor is disabled when it receives a signal from a control unit that the control unit has been placed into one or more particular operating modes. In response to receiving the signal, the sensor becomes disabled, thereby preventing detection and/or transmission of certain signals to the security panel. When the control unit is placed into another mode of operation, the control unit sends a signal to the sensor and, in response, the sensor is re-enabled, allowing the sensor to function normally.
G06F 1/3234 - Gestion de l’alimentation, c. à d. passage en mode d’économie d’énergie amorcé par événements Économie d’énergie caractérisée par l'action entreprise
G06F 9/30 - Dispositions pour exécuter des instructions machines, p.ex. décodage d'instructions
H02J 7/02 - Circuits pour la charge ou la dépolarisation des batteries ou pour alimenter des charges par des batteries pour la charge des batteries par réseaux à courant alternatif au moyen de convertisseurs
A barrier alarm device for reducing the number of false alarms that may occur in a home or business security system. In one embodiment, a barrier alarm device, such as a door or window sensor, determines whether a barrier, such as a door or a window, has been opened, and determines whether a human being is inside a premises in proximity to the door or window. If a human being is inside the monitored premises when the door or window is opened, it indicates that the human being is authorized to be inside the monitored premises, and the barrier alarm device transmits a timed alarm signal to a central security panel, causing a security response to be generated by the central security panel if a predetermined time period elapses without a user canceling the security response.
B60R 25/34 - Détection relative au vol ou autres événements relatifs aux systèmes antivol de l’état des composants du véhicule, p.ex. des fenêtres, des serrures des portes ou des appareils de sélection de changement de vitesse
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 21/04 - Alarmes pour assurer la sécurité des personnes réagissant à la non-activité, p.ex. de personnes âgées
G08B 13/16 - Déclenchement par intervention de vibrations mécaniques dans l'air ou un autre fluide
G08B 29/18 - Prévention ou correction d'erreurs de fonctionnement
G08B 25/14 - Dispositions centrales pour la réception ou l'indication d'une alarme
G08B 21/22 - Alarmes de situation réagissant à la présence ou à l'absence de personnes
A person-detection device that automatically configures itself as a motion sensor or an occupancy sensor upon receiving a command from a home security panel or home automation hub.
G05B 15/02 - Systèmes commandés par un calculateur électriques
G05B 19/18 - Commande numérique (CN), c.à d. machines fonctionnant automatiquement, en particulier machines-outils, p.ex. dans un milieu de fabrication industriel, afin d'effectuer un positionnement, un mouvement ou des actions coordonnées au moyen de données d'u
G08B 21/04 - Alarmes pour assurer la sécurité des personnes réagissant à la non-activité, p.ex. de personnes âgées
G01P 13/00 - Indication ou enregistrement de l'existence ou de l'absence d'un mouvement; Indication ou enregistrement de la direction d'un mouvement
A method, apparatus and system is disclosed for automatically opening and closing a garage door without user intervention. A vehicle-mounted mobile transmitter autonomously and continuously transmits a repeating signal pattern when power is applied to the transmitter as a vehicle is started by a user. A movable barrier gateway device receives the signals from the mobile transmitter and compares an identification code contained in each of the signals to an identification code stored in memory. When a match is found, the movable barrier gateway device sends a signal to a movable barrier controller to open the garage door, and keep the door open as long as the movable barrier gateway continues to receive the signals from the mobile transmitter.
E05F 15/20 - commandés par des moyens d'action automatique, p.ex. par des cellules photo-électriques, par des ondes électriques, par des thermostats, par la pluie, par le feu
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
E05F 15/668 - Mécanismes pour battants mus par une force motrice utilisant des actionneurs électriques utilisant des électromoteurs rotatifs pour battants à coulissement vertical pour battants s’ouvrant de haut en bas
E05F 15/77 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique utilisant une commande sans fil
E05F 15/76 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique sensible au déplacement ou à la présence de personnes ou d’objets sensible à des dispositifs portés par des personnes ou des objets, p.ex. aimants ou miroirs
A system, method and apparatus for configuring a person detection sensor. The person detection sensor may limit its transmissions in accordance with a pre-configured dwell time. The person detection sensor may receive a new dwell time from a remote device. When the new dwell time is received, it is stored in memory and is then used to regulate the number of transmissions of the person detection sensor in accordance with the new dwell time.
G08B 13/196 - Déclenchement influencé par la chaleur, la lumière, ou les radiations de longueur d'onde plus courte; Déclenchement par introduction de sources de chaleur, de lumière, ou de radiations de longueur d'onde plus courte utilisant des systèmes détecteurs de radiations passifs utilisant des systèmes de balayage et de comparaison d'image utilisant des caméras de télévision
G06F 1/3231 - Surveillance de la présence, de l’absence ou du mouvement des utilisateurs
G06F 1/3228 - Surveillance d’exécution de tâches, p.ex. par utilisation de temporisations d’attente, de commandes d’arrêt ou de commandes d’attente
A light switch cover for converting a standard toggle switch into a remote-controlled toggle switch. In one embodiment, the light switch cover comprises a switch toggle member for acting upon a toggle light switch member to place the toggle light switch member into either an on position or an off position, a gear train coupled to the switch toggle member that causes the switch toggle member to act upon the toggle light switch member, an electric motor, coupled to the gear train, for driving the gear train in a first direction to cause the switch toggle member to place the toggle light switch member into the on position, and for driving the gear train in a second direction to cause the switch toggle member to place the toggle light switch member into the off position, motor driving circuitry coupled to the electric motor, a receiver for receiving signals that cause actuation of the standard toggle switch, and processing circuitry coupled to the receiver and the motor driving circuitry that causes the light switch cover to receive a signal to turn the toggle switch into the on position and, in response, causing the electric motor to rotate in a direction to cause the switch toggle member to place the toggle light switch member into the on position.
H01H 43/10 - Interrupteurs horaires ou à programme horaire présentant un choix d'intervalles de temps pour exécuter une ou plusieurs opérations de commutation et mettre automatiquement un terme à leur fonctionnement une fois que le programme a été exécuté comportant un réglage des temps d'actionnement des contacts par un organe tournant à une vitesse pratiquement constante
Described is a security sensor comprising two or more sub-sensors for use in a variety of installations where different magnetic fields may be experienced by the security sensor as a result of the variety of installations. One of the sub-sensors may have a low magnetic sensitivity while the other sub-sensor may have a much higher sensitivity to magnetic fields. In operation, one or both sub-sensors are used to determine if a door or a window has been opened.
G08B 13/24 - Déclenchement électrique par une interférence avec la distribution d'un champ électromagnétique
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G01R 33/07 - Mesure de la direction ou de l'intensité de champs magnétiques ou de flux magnétiques en utilisant des dispositifs galvano-magnétiques des dispositifs à effet Hall
G01B 7/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques électriques ou magnétiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
G01R 33/00 - Dispositions ou appareils pour la mesure des grandeurs magnétiques
G01R 33/02 - Mesure de la direction ou de l'intensité de champs magnétiques ou de flux magnétiques
G08B 21/22 - Alarmes de situation réagissant à la présence ou à l'absence de personnes
G08B 29/20 - Etalonnage, y compris les dispositions d'auto-étalonnage
A method and apparatus for monitoring a door or a window is disclosed. In one embodiment, a method is described, comprising receiving, by a processor, an electronic signal from a motion sensor in response to movement of the door or window, determining a direction of movement of the door or window from the electronic signal by the processor, comparing the direction of movement to a predetermined direction by the processor, detecting, by the processor, an alarm condition of the door or window if the electronic signal indicates that the door or window is being opened, and transmitting, by a transmitter coupled to the processor, an alarm signal when the alarm condition has been detected.
G08B 29/12 - Vérification intermittente des systèmes de signalisation ou d'alarme
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
A method, system, and apparatus for temporarily disarming a barrier alarm in a security system. In one embodiment, a method is described, performed by a barrier alarm in communication with a central controller, where the barrier alarm receives a first signal from a user interface on the barrier alarm to disarm the barrier alarm, disables the barrier alarm in response to receiving the indication, and re-arming the barrier alarm upon receipt of a second signal from a sensor that forms part of the barrier alarm.
G08B 23/00 - Alarmes réagissant à des conditions indésirables ou anormales, non spécifiées
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
An electronic device lacking an internal power supply comprises electronic circuitry, an external power adapter having an input connector for receiving AC power from a conventional AC power outlet and for providing a low-voltage output signal to an output connector, and a first port electronically coupled to the electronic circuitry for receiving the low-voltage output signal from the output connector of the power adapter and for providing the low-voltage output signal to the electronic circuitry.
A base station used in a home security or home automation/control system is described. The base station is configured to automatically accept new sensors or control modules by placing such new sensors or control modules in proximity to the base station.
H04W 76/14 - Gestion de la connexion Établissement de la connexion Établissement de la connexion en mode direct
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
H04W 4/80 - Services utilisant la communication de courte portée, p.ex. la communication en champ proche, l'identification par radiofréquence ou la communication à faible consommation d’énergie
H04W 4/70 - Services pour la communication de machine à machine ou la communication de type machine
H04W 60/04 - Rattachement à un réseau, p.ex. enregistrement; Suppression du rattachement à un réseau, p.ex. annulation de l'enregistrement utilisant des événements déclenchés
70.
Method and apparatus for detecting a hazard detector signal in the presence of interference
The present disclosure describes methods and apparatus for detecting a pattern warning signal from a hazard detector in the presence of a second pattern warning signal from a second hazard detector. In one embodiment, hazard detector monitoring device converts a pattern warning signal and a second pattern warning signal into a composite electronic signal, each of the first and second pattern warning signals comprising an on-time period followed by an off-time period. Next, the composite electronic signal is converted into a digital signal and then an on-time duration of the digital signal is determined as a time that the digital signal exceeded a first voltage threshold. Finally, an alarm signal is transmitted to a receiver when the pattern warning signal has been determined to be present, based on the on-time duration.
A remote-controlled switch cover assembly is described for converting an existing rocker switch into a remote-controlled switch. The remote-controlled switch cover assembly receives a wireless signal to actuate the existing rocker switch and, in response, activates an electric motor that causes a gear train to turn in a first direction. This causes a wiper to engage an under-surface of a tilt plate located above the existing rocker switch and, in response, an opposing end of the tit plate depresses the existing rocker switch.
H01H 23/24 - Interrupteurs à bascule ou à berceau, c. à d. interrupteurs caractérisés en ce qu'ils sont actionnés par basculement d'un organe de l'interrupteur en forme de bouton à bascule à deux positions de travail
A method, system, and apparatus for programming a sensor at a customer location is disclosed. A defective sensor at a customer location is replaced by a new sensor that is programmed at the customer location using a programming device or a transducer coupled to a computing device. The new sensor is programming using the sensor's detector normally used to sense a change in a magnetic field, an RF signal, infra-red light, or some other emission or property.
A method and apparatus is described for providing energy system status information. A status indication device may be mounted near an entry door for determining when an individual is about to leave an area. When the status indication device determines that an individual is about to leave an area, it displays an energy status to the individual, so that the individual can decide whether to place energy-consuming devices in a conservation mode of operation.
H02J 13/00 - Circuits pour pourvoir à l'indication à distance des conditions d'un réseau, p.ex. un enregistrement instantané des conditions d'ouverture ou de fermeture de chaque sectionneur du réseau; Circuits pour pourvoir à la commande à distance des moyens de commutation dans un réseau de distribution d'énergie, p.ex. mise en ou hors circuit de consommateurs de courant par l'utilisation de signaux d'impulsion codés transmis par le réseau
A method and apparatus is described for interacting with a security system using a television remote control. Commands sent by the remote control are received by an auxiliary interface device, which then provides the commands to a security system controller either directly, via a local-area network, or via a wide-area network and server. Status and acknowledgement messages are transmitted from the security system controller to the auxiliary device, whereupon they are provided to and displayed by a television in the form of a security dashboard.
H04N 21/422 - Périphériques d'entrée uniquement, p.ex. système de positionnement global [GPS]
H04L 12/28 - Réseaux de données à commutation caractérisés par la configuration des liaisons, p.ex. réseaux locaux [LAN Local Area Networks] ou réseaux étendus [WAN Wide Area Networks]
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/14 - Dispositions centrales pour la réception ou l'indication d'une alarme
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
H04N 21/41 - Structure de client; Structure de périphérique de client
H04N 21/478 - Services additionnels, p.ex. affichage de l'identification d'un appelant téléphonique ou application d'achat
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H04N 21/238 - Interfaçage de la voie descendante du réseau de transmission, p.ex. adaptation du débit de transmission d'un flux vidéo à la bande passante du réseau; Traitement de flux multiplexés
H04N 21/431 - Génération d'interfaces visuelles; Rendu de contenu ou données additionnelles
H04N 21/436 - Interfaçage d'un réseau de distribution local, p.ex. communication avec un autre STB ou à l'intérieur de la maison
H04N 21/45 - Opérations de gestion réalisées par le client pour faciliter la réception de contenu ou l'interaction avec le contenu, ou pour l'administration des données liées à l'utilisateur final ou au dispositif client lui-même, p.ex. apprentissage des préféren
The present disclosure provides an illumination feature for an electronic device. A light cone is used to direct light from a light emitter to an interior surface of a housing of an electronic device in one of a variety of geometric, alphabetic, or numerical designs.
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
F21V 33/00 - Combinaisons structurales de dispositifs d'éclairage avec d'autres objets, non prévues ailleurs
G08B 29/12 - Vérification intermittente des systèmes de signalisation ou d'alarme
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
An electronic device lacking an internal power supply comprises electronic circuitry, an external power adapter having an input connector for receiving AC power from a conventional AC power outlet and for providing a low-voltage output signal to an output connector, and a first port electronically coupled to the electronic circuitry for receiving the low-voltage output signal from the output connector of the power adapter and for providing the low-voltage output signal to the electronic circuitry.
Aspects of the present invention are directed towards identifying users in a room by an intelligent personal assistant for automatic control of certain devices controlled by the assistant. The assistant may have a retractable, reflector that is used to identify persons in the vicinity of the assistant when the retractable, reflector is in an extended position. The retractable, reflector may additionally be stowed inside the assistant to stop processing visual information in the vicinity of the assistant.
G01S 7/00 - DÉTERMINATION DE LA DIRECTION PAR RADIO; RADIO-NAVIGATION; DÉTERMINATION DE LA DISTANCE OU DE LA VITESSE EN UTILISANT DES ONDES RADIO; LOCALISATION OU DÉTECTION DE LA PRÉSENCE EN UTILISANT LA RÉFLEXION OU LA RERADIATION D'ONDES RADIO; DISPOSITIONS ANALOGUES UTILISANT D'AUTRES ONDES - Détails des systèmes correspondant aux groupes , ,
G01S 7/481 - Caractéristiques de structure, p.ex. agencements d'éléments optiques
G06F 3/01 - Dispositions d'entrée ou dispositions d'entrée et de sortie combinées pour l'interaction entre l'utilisateur et le calculateur
A method and apparatus for monitoring a door or a window is disclosed. In one embodiment, a method is described, comprising receiving, by a processor, an electronic signal from a motion sensor in response to movement of the door or window, determining a direction of movement of the door or window from the electronic signal by the processor, comparing the direction of movement to a predetermined direction by the processor, detecting, by the processor, an alarm condition of the door or window if the electronic signal indicates that the door or window is being opened, and transmitting, by a transmitter coupled to the processor, an alarm signal when the alarm condition has been detected.
The present disclosure provides an illumination feature for an electronic device. A light cone is used to direct light from a light emitter to an interior surface of a housing of an electronic device in one of a variety of geometric, alphabetic, or numerical designs.
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
Embodiments of a central security monitoring device for reducing incidences of false alarms in a security system is disclosed. In one embodiment, a method is described, comprising receiving an alarm signal from an occupancy sensor via a receiver, receiving a second alarm signal from a barrier alarm device after receiving the alarm signal, determining, by a processor, an elapsed time from when the alarm signal from the occupancy sensor was received to when the second alarm signal from the barrier alarm device was received, transmitting, by the processor via a network interface, a message to a personal communication device indicating that a false alarm has occurred when the elapsed time is less than the predetermined time.
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 29/18 - Prévention ou correction d'erreurs de fonctionnement
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
G08B 3/10 - Systèmes de signalisation audible; Systèmes d'appel sonore de personnes utilisant une transmission électromagnétique
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
82.
EVENT NOTIFICATION USING AN INTELLIGENT DIGITAL ASSISTANT
A system for providing user-defined event notifications is describe. The system typically comprises an intelligent digital assistant coupled to a local area network for receiving an audible event definition from a user, an electronic system coupled to the local area network for determining whether a first user-defined event has occurred, and an event detection and notification server, coupled to the intelligent digital assistant and the first electronic system via a wide-area network. The event detection and notification system receives an audible event definition from the intelligent digital assistant, interpret the audible event definition to determine that the first user-defined event is present, identify the first electronic system as a system that determines whether the event occurs, determine that the first user-defined event occurred communications with the first electronic system, and provide a notification to the user that the first user-defined event has occurred.
G08B 3/10 - Systèmes de signalisation audible; Systèmes d'appel sonore de personnes utilisant une transmission électromagnétique
G08B 19/00 - Alarmes réagissant à plusieurs conditions différentes, indésirables ou anormales, p.ex. cambriolage et incendie, température anormale et débit d'écoulement anormal
A light switch cover for converting a standard toggle switch into a remote-controlled toggle switch. In one embodiment, the light switch cover comprises a switch toggle member for acting upon a toggle light switch member to place the toggle light switch member into either an on position or an off position, a gear train coupled to the switch toggle member that causes the switch toggle member to act upon the toggle light switch member, an electric motor, coupled to the gear train, for driving the gear train in a first direction to cause the switch toggle member to place the toggle light switch member into the on position, and for driving the gear train in a second direction to cause the switch toggle member to place the toggle light switch member into the off position, motor driving circuitry coupled to the electric motor, a receiver for receiving signals that cause actuation of the standard toggle switch, and processing circuitry coupled to the receiver and the motor driving circuitry that causes the light switch cover to receive a signal to turn the toggle switch into the on position and, in response, causing the electric motor to rotate in a direction to cause the switch toggle member to place the toggle light switch member into the on position.
H01H 43/10 - Interrupteurs horaires ou à programme horaire présentant un choix d'intervalles de temps pour exécuter une ou plusieurs opérations de commutation et mettre automatiquement un terme à leur fonctionnement une fois que le programme a été exécuté comportant un réglage des temps d'actionnement des contacts par un organe tournant à une vitesse pratiquement constante
A method, system, and apparatus for temporarily disarming a barrier alarm in a security system. In one embodiment, a method is described, performed by a barrier alarm in communication with a central controller, where the barrier alarm receives a first signal from a user interface on the barrier alarm to disarm the barrier alarm, disables the barrier alarm in response to receiving the indication, and re-arming the barrier alarm upon receipt of a second signal from a sensor that forms part of the barrier alarm.
G08B 23/00 - Alarmes réagissant à des conditions indésirables ou anormales, non spécifiées
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
A barrier alarm device for reducing the number of false alarms that may occur in a home or business security system. In one embodiment, a barrier alarm device, such as a door or window sensor, determines whether a barrier, such as a door or a window, has been opened, and determines whether a human being is inside a premises in proximity to the door or window. If a human being is inside the monitored premises when the door or window is opened, it indicates that the human being is authorized to be inside the monitored premises, and the barrier alarm device transmits a timed alarm signal to a central security panel, causing a security response to be generated by the central security panel if a predetermined time period elapses without a user canceling the security response.
B60R 25/34 - Détection relative au vol ou autres événements relatifs aux systèmes antivol de l’état des composants du véhicule, p.ex. des fenêtres, des serrures des portes ou des appareils de sélection de changement de vitesse
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 21/04 - Alarmes pour assurer la sécurité des personnes réagissant à la non-activité, p.ex. de personnes âgées
G08B 13/16 - Déclenchement par intervention de vibrations mécaniques dans l'air ou un autre fluide
G08B 29/18 - Prévention ou correction d'erreurs de fonctionnement
G08B 25/14 - Dispositions centrales pour la réception ou l'indication d'une alarme
G08B 21/22 - Alarmes de situation réagissant à la présence ou à l'absence de personnes
A security method and apparatus is disclosed. In one embodiment, a method for providing an alarm for a window by a security apparatus comprises calculating a first distance between a detector mounted within a movable portion of the window and a window frame edge and calculating a second distance between the detector and the window frame edge. The method further comprises determining whether the movable portion of the window has remained stationary for more than a predetermined time period based on the first distance and the second distance and, if the movable portion has remained stationary for more than the predetermined time period, storing the second distance in a memory, placing the security apparatus into an active alarm state, calculating a third distance observed by the detector, determining a change between the third distance and the second distance, determining whether the change exceeds a predetermined distance, and generating an alarm signal if the change exceeds the predetermined distance.
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 29/22 - Dispositions pour faciliter l'étalonnage manuel, p.ex. dispositions d'entrée ou de sortie pour les tests; Maintien de valeurs intermittentes permettant la mesure
G08B 29/18 - Prévention ou correction d'erreurs de fonctionnement
87.
Method and apparatus for detecting a hazard detector signal in the presence of interference
The present disclosure describes methods and apparatus for detecting a pattern warning signal from a hazard detector in the presence of a second pattern warning signal from a second hazard detector. In one embodiment, hazard detector monitoring device converts a pattern warning signal and a second pattern warning signal into a composite electronic signal, each of the first and second pattern warning signals comprising an on-time period followed by an off-time period. Next, the composite electronic signal is converted into a digital signal and then an on-time duration of the digital signal is determined as a time that the digital signal exceeded a first voltage threshold. Finally, an alarm signal is transmitted to a receiver when the pattern warning signal has been determined to be present, based on the on-time duration.
Described is a security sensor comprising two or more sub-sensors for use in a variety of installations where different magnetic fields may be experienced by the security sensor as a result of the variety of installations. One of the sub-sensors may have a low magnetic sensitivity while the other sub-sensor may have a much higher sensitivity to magnetic fields. In operation, one or both sub-sensors are used to determine if a door or a window has been opened.
G08B 13/24 - Déclenchement électrique par une interférence avec la distribution d'un champ électromagnétique
G01B 7/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques électriques ou magnétiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
G01R 33/00 - Dispositions ou appareils pour la mesure des grandeurs magnétiques
G01R 33/02 - Mesure de la direction ou de l'intensité de champs magnétiques ou de flux magnétiques
G08B 21/22 - Alarmes de situation réagissant à la présence ou à l'absence de personnes
The present disclosure provides an illumination feature for an electronic device. A light cone is used to direct light from a light emitter to an interior surface of a housing of an electronic device in one of a variety of geometric, alphabetic, or numerical designs.
G08B 5/36 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique utilisant des sources de lumière visible
A method, system, and apparatus for programming a sensor at a customer location is disclosed. A defective sensor at a customer location is replaced by a new sensor that is programmed at the customer location using a programming device or a transducer coupled to a computing device. The new sensor is programming using the sensor's detector normally used to sense a change in a magnetic field, an RF signal, infra-red light, or some other emission or property.
A method and apparatus is described for providing energy system status information. A status indication device may be mounted near an entry door for determining when an individual is about to leave an area. When the status indication device determines that an individual is about to leave an area, it displays an energy status to the individual, so that the individual can decide whether to place energy-consuming devices in a conservation mode of operation.
G05B 15/02 - Systèmes commandés par un calculateur électriques
H02J 13/00 - Circuits pour pourvoir à l'indication à distance des conditions d'un réseau, p.ex. un enregistrement instantané des conditions d'ouverture ou de fermeture de chaque sectionneur du réseau; Circuits pour pourvoir à la commande à distance des moyens de commutation dans un réseau de distribution d'énergie, p.ex. mise en ou hors circuit de consommateurs de courant par l'utilisation de signaux d'impulsion codés transmis par le réseau
A self-configuring sensor and method of operation of the sensor is described. In one embodiment, the self-configuring sensor comprises a first sub-sensor for determining a first status of a door or window, a second sub-sensor for determining a second status of the door or window, a wireless transmitter, a memory for storing processor-executable instructions, and a processor coupled to the first sub-sensor, the second sub-sensor, the wireless transmitter and the memory for executing the processor-executable instructions that cause the sensor to monitor the first and second sub-sensors for detecting changes in a first sub-sensor state and a second sub-sensor state, respectively, and determine an installation configuration based on the changes in the first sub-sensor state and the second sub-sensor state, the installation configuration comprising a type of hardware where the self-configuring sensor has been installed.
Aspects of the present invention are directed towards a more natural way to interact with an intelligent personal assistant. An intelligent personal assistant comprises a camera that provides images of an area surrounding the assistant. The assistant monitors images provided by the camera to determine when a user is addressing the assistant. When voice input is received after determining that a user is addressing the assistant, the assistant understands that the voice input is intended for the assistant, and acts on the voice input to respond to the user.
Methods and apparatus are described for automatically disarming a security system. For example, a method for automatically disarming a security system is described, comprising determining, by a personal communication device, when a person is in proximity to the person's home or business and, in response to determining that the person is in proximity to the person's home or business, transmitting a disarm command by the personal communication device to a security controller for the security controller to disarm the security system.
G08B 23/00 - Alarmes réagissant à des conditions indésirables ou anormales, non spécifiées
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
G08B 25/08 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant les lignes de communication
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
G08B 29/12 - Vérification intermittente des systèmes de signalisation ou d'alarme
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
A method, apparatus and system is disclosed for automatically opening and closing a garage door without user intervention. A vehicle-mounted mobile transmitter autonomously and continuously transmits a repeating signal pattern when power is applied to the transmitter as a vehicle is started by a user. A movable barrier gateway device receives the signals from the mobile transmitter and compares an identification code contained in each of the signals to an identification code stored in memory. When a match is found, the movable barrier gateway device sends a signal to a movable barrier controller to open the garage door, and keep the door open as long as the movable barrier gateway continues to receive the signals from the mobile transmitter.
E06B 3/00 - Châssis mobiles de fenêtres, battants de portes ou éléments analogues pour fermer les ouvertures; Pose des fermetures fixes ou mobiles, p.ex. des fenêtres; Caractéristiques des châssis extérieurs fixes relatives au montage des châssis des battants
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
E05F 15/668 - Mécanismes pour battants mus par une force motrice utilisant des actionneurs électriques utilisant des électromoteurs rotatifs pour battants à coulissement vertical pour battants s’ouvrant de haut en bas
E05F 15/77 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique utilisant une commande sans fil
E05F 15/76 - Mécanismes pour battants mus par une force motrice avec déclenchement automatique sensible au déplacement ou à la présence de personnes ou d’objets sensible à des dispositifs portés par des personnes ou des objets, p.ex. aimants ou miroirs
A barrier alarm device for reducing the number of false alarms that may occur in a home security system. In one embodiment, a barrier alarm device, such as a door or window sensor, determines whether a barrier, such as a door or a window, has been opened, determines whether a human being is in proximity to the door or window inside a monitored premises. If a human being is inside the monitored premises when the door or window is opened, it indicates that the human being is authorized to be inside the monitored premises, and an alarm signal is not transmitted to a central security panel, thus reducing false alarms.
G08B 21/00 - Alarmes réagissant à une seule condition particulière, indésirable ou anormale, et non prévues ailleurs
G08B 13/08 - Déclenchement mécanique par ouverture, p.ex. de portes, de fenêtres, de tiroirs, de contrevents, de rideaux ou de stores
G08B 13/16 - Déclenchement par intervention de vibrations mécaniques dans l'air ou un autre fluide
G08B 21/04 - Alarmes pour assurer la sécurité des personnes réagissant à la non-activité, p.ex. de personnes âgées
G08B 25/00 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police
A remote-controlled switch cover assembly is described for converting an existing rocker switch into a remote-controlled switch. The remote-controlled switch cover assembly receives a wireless signal to actuate the standard rocker switch and, in response, activates an electric motor that causes a gear train to turn in a first direction. This causes a wiper to engage an under-surface of a tilt plate located above the standard rocker switch and, in response, an opposing end of the tit plate depresses the standard rocker switch.
H01H 23/00 - Interrupteurs à bascule ou à berceau, c. à d. interrupteurs caractérisés en ce qu'ils sont actionnés par basculement d'un organe de l'interrupteur en forme de bouton à bascule
H01H 23/24 - Interrupteurs à bascule ou à berceau, c. à d. interrupteurs caractérisés en ce qu'ils sont actionnés par basculement d'un organe de l'interrupteur en forme de bouton à bascule à deux positions de travail
A method, system, and apparatus for programming a sensor at a customer location is disclosed. A defective sensor at a customer location is replaced by a new sensor that is programmed at the customer location using a programming device or a transducer coupled to a computing device. The new sensor is programming using the sensor's detector normally used to sense a change in a magnetic field, an RF signal, infra-red light, or some other emission or property.