Produits et services

Software which allows users to diagnose, troubleshoot, repair, calibrate, and update a vehicle's system; and diagnostic software program and diagnostic hardware with electric cables to connect, which allows users to diagnose, troubleshoot, repair and calibrate a vehicle's system

Produits et services

Golf Club Grips

Produits et services

Golf Club Grips

Produits et services

(1) Software which allows users to diagnose, troubleshoot, repair, calibrate, and update a vehicle's system; Diagnostic kit for vehicles comprised by a diagnostic software program, diagnostic hardware, electric cables to connect the hardware, all of which allows users to diagnose, troubleshoot, repair and calibrate a vehicle's system

Produits et services

(1) Electrical power distribution assemblies for multiple outlets; KVM switches; auxiliary power supplies; Electronic components in the nature of line filters; uninterruptible electrical power supplies; voltage surge suppressors; electronic products, namely, power inverters; battery chargers; battery cases; battery cartridges; isolation transformers; USB hubs; USB hardware; frames, mounting racks and enclosures specially adapted for storing, organizing, and protecting computer hardware and telecommunication equipment; cables, namely, audio cables, audio/video cables, computer cables, computer networking cables, power cables, USB cables and video cables; signal splitters for electronic apparatus; switches for electronic apparatus, namely, computer network switches; cooling devices specially adapted for cooling computers and computer hardware, namely, a heat exchanger, pump and fan that circulate a liquid coolant; fans specially adapted for cooling computer hardware in rack enclosures; notebook computer cooling pads; network management products, namely, SNMP (simple network management protocol) cards; computer hardware for remote monitoring and control of environmental conditions, such as temperature and humidity in network environments; computer hardware for controlling and monitoring UPS (uninterruptible power supply) systems; downloadable computer software for controlling and monitoring UPS (uninterruptible power supply) systems and computer network systems; computer peripherals; remote controls for presentation devices in the nature of computers and projectors; computer carrying cases and bags; audio speakers; mounts and mounting brackets adapted for televisions, video displays and monitors; charging stations in the nature of charging carts with USB charging ports for tablet computers; battery chargers for mobile telephones or tablet computers. (2) Cooling devices other than parts for machines, namely a heat exchanger, pump and fan that circulate a liquid coolant for electronic equipment; electric fans for cooling computer hardware in rack enclosures.

Produits et services

Electronic device for monitoring, retrieving, managing, and sharing operational data from electrical equipment

Produits et services

(1) Electronic device for monitoring, retrieving, managing, and sharing operational data from electrical equipment.

Produits et services

Golf club grips.

Produits et services

Downloadable software and firmware for automatic transfer switches (ATS) used for providing operational data and diagnostics

Produits et services

(1) Golf club grips

Produits et services

Golf club grips

Produits et services

Golf club grips.

Produits et services

Golf club grips.

Produits et services

(1) Golf club grips

Produits et services

Golf club grips

Produits et services

(1) Limited slip torque biasing differentials for rear axles, front axles, inter-axles and transfer case drives

Produits et services

power monitoring equipment, namely power quality analyzers and power meters to monitor electricity network characteristics, electricity usage, and power quality at consumer sites

Produits et services

golf club grips

Abrégé

A valve assembly includes a valve housing, a cap coupled to the valve housing and defining a cap inlet, a float movably disposed inside the valve housing such that the float is movable relative to the valve housing, a ribbon coupled between the float and the cap such that the ribbon is movable relative to the valve housing upon movement of the float. The float includes a main float body and a retaining feature coupled to the main float body, and the retaining feature secures the ribbon attached to the float.

Classes IPC  ?

• B60K 15/035 - Réservoirs de carburant caractérisés par de moyens d'aération

Produits et services

Golf Club Grips

Produits et services

(1) Golf Club Grips

Produits et services

(1) Circuit breakers; trip units; software for monitoring power and energy, software for monitoring power distribution, software for monitoring select equipment in a system, managing alarms within the system, providing the ability for a comprehensive visual representation of the electrical equipment and devices within the system, allowing the owner to view energy data, and generating detailed reports on energy usage, alarm history, and power quality

Produits et services

Circuit breakers; trip units for circuit breakers; downloadable software for monitoring power and energy; downloadable software for monitoring power distribution; downloadable software for monitoring select equipment in a system, managing alarms within the system, providing the ability for a comprehensive visual representation of the electrical equipment and devices within the system, allowing the owner to view energy data, and generating detailed reports on energy usage, alarm history, and power quality Providing temporary use of online, non-downloadable software for monitoring power and energy; Providing temporary use of online, non-downloadable software for monitoring power distribution; Providing temporary use of online, non-downloadable software for monitoring select equipment in a system, managing alarms within the system, providing the ability for a comprehensive visual representation of the electrical equipment and devices within the system, allowing the owner to view energy data, and generating detailed reports on energy usage, alarm history, and power quality

Produits et services

(1) Electrical power housing for use in supplying electrical power and telecommunication ports in campgrounds and marinas.

Produits et services

(1) Electrical distribution systems consisting of power distribution panels, electrical switches, and electrical power connectors for marinas, private docks, pools, and deck areas.

Produits et services

(1) Arc fault circuit interrupters; conventional electricity meters; electrical disconnect switches; electrical disconnects for stopping the flow of electricity in an electrical circuit; electrical distribution substation; electrical ground fault detectors; electrical outlets; electrical transformers; ground fault circuit interrupters; photocells; service disconnect switches; video and telecommunication ports, namely, graphics ports, VGA port, high definition digital interface, USB-C, DVI, serial ports and parallel ports;

Produits et services

(1) Electrical distribution systems for recreational vehicles consisting of power distribution panels, electrical switches, telecommunications cables, and electrical power connectors

Produits et services

Electric power outlet connector or connector assembly for use in supplying electrical power and telecommunication ports in campgrounds and marinas

Produits et services

(1) Electrical power housing for use in supplying electrical power and telecommunication ports in campground parks and marinas.

Produits et services

(1) Electrical power housing for use in supplying electrical power and telecommunication ports in campgrounds and marinas.

Produits et services

(1) Electrical distribution systems consisting of power distribution panels, electrical switches, and electrical power connectors for marinas, private docks, pools, and deck areas

Produits et services

Medium voltage electrical power switchgear for primary, secondary and ring main unit applications in electrical distribution networks.

Produits et services

(1) Cables; adapters; power cords; surge suppressors; surge protectors; charging carts; power supplies; uninterruptible power supplies; video monitors; video displays; battery chargers; USB hardware; computer peripheral devices

Produits et services

(1) Power overload isolation system sold as an integral component of power distribution units

Produits et services

Power overload isolation system sold as an integral component of power distribution units.

Produits et services

(1) Vacuum sectionalizer electric current switches used for a three phase system that operates independently or electronically linked to an electric current control device.

Produits et services

(1) Vacuum loadbreak electric current switches used for a three phase electrical system that operates independently or is electronically linked to an electric current control device.

Produits et services

Vacuum loadbreak switches used in the transmission and distribution of electrical power for a three phase system that operates independently or electronically linked to a control system

Produits et services

Vacuum sectionalizer switches used in the transmission and distribution of electrical power for a three phase system that operates independently or electronically linked to a control system

Produits et services

Digital technology platform, software development components and software solutions; software to enable users to optimize the functionality of internal combustion engines and hybrid and electric battery vehicle power management; software to manage energy and electrical power use in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery, electric vehicles and electrified aircraft; electric sensors; software to manage energy and electrical power for improving energy efficiency and reliability and to manage the availability, reliability and optimization of electrical power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery, electric vehicles and electrified aircraft; Systems primarily comprised of electric sensors, electrical controlling devices, electric switches and actuators, electric relays, electric converters, electric control panels, electric display interfaces, switchgear, electric switches, circuit interrupters, circuit breakers, fuses, communication and network gateways, power supplies for generating, conveying, distributing, transforming, storing, regulating and controlling electric current; electrical integrated control systems for use in the field of electrical power quality, electrical power management, and usage; internet servers to provide data, downloadable software, and visualization for electrical power management, facility, and process management. Systems primarily comprised of transmissions, differentials, engine air management, electric vehicle batteries, electronics, converters and power distribution and circuit protection for passenger car, commercial and off-highway vehicles, namely, electronic land vehicle operational systems provided as an integral component of passenger cars, commercial and off-highway vehicles for use in enabling more efficient energy usage. Design of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of automation, power distribution, power efficiency, power quality, and power management; product development of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of power distribution, automation, power quality, and power management; technological analysis of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of analyzing and evaluating power requirements to determine conformity with certification standards; consultancy services regarding the design of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for power automation, power quality, efficiency, and management; automation, facility and process management, control, measurement and monitoring services, namely, remote monitoring services to manage the availability, reliability and optimization of power for quality control purposes where such power is provided in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft; computer project management services for maintenance, repair and overhaul of electrical and industrial equipment being power distribution and monitoring equipment, power quality equipment, power maintenance equipment, and telecommunication equipment used in construction projects.

Produits et services

(1) Digital technology platform, software development components and software solutions, namely, recorded and downloadable software that enables users to optimize the functionality of internal combustion engines and hybrid and electric battery vehicle power management, and to manage energy and electrical power use in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery, electric vehicles and electrified aircraft; electric sensors and software, namely, recorded and downloadable software that enables users to manage energy and electrical power for improving energy efficiency and reliability and to manage the availability, reliability and optimization of electrical power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery, electric vehicles and electrified aircraft; Systems primarily comprised of electric sensors, electrical controlling devices, electric switches and actuators, electric relays, electric converters, electric control panels, electric display interfaces, switchgear being electric switches, circuit protection in the nature of circuit breakers and fuses, communications and network gateways, and power supplies for generating, conveying, distributing, transforming, storing, regulating and controlling electric current, namely, electrical integrated control systems for use in the field of electrical power quality, electrical power management, and usage; Internet servers that incidentally provide data, downloadable software and visualization for electrical power management, facility and process management (2) Systems primarily comprised of transmissions, differentials, engine air management, electric vehicle batteries, electronics, converters and power distribution and circuit protection for passenger car, commercial and off-highway vehicles, namely, electronic land vehicle operational systems provided as an integral component of passenger cars, commercial and off-highway vehicles for use in enabling more efficient energy usage (1) Design of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of automation, power distribution, power efficiency, power quality, and power management; product development of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of power distribution, automation, power quality, and power management; analysis of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of analyzing and evaluating power requirements to determine conformity with certification standards; consultancy services regarding the design of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for power automation, power quality, efficiency, and management; automation, facility and process management, control, measurement and monitoring services, namely, remote monitoring services to manage the availability, reliability and optimization of power for quality control purposes where such power is provided in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft; computer project management services for maintenance, repair and overhaul of electrical and industrial equipment being power distribution and monitoring equipment, power quality equipment, power maintenance equipment, and telecommunication equipment used in construction projects

Produits et services

Downloadable computer software for remotely monitoring and controlling fluid hydraulic pumps and pumping systems, and irrigation systems for use in agricultural, industrial, mining, and commercial applications

Produits et services

Proximity sensors

Produits et services

Cables; adapters; power cords; surge suppressors; surge protectors; charging carts; power supplies; uninterruptible power supplies; video monitors; video displays; battery chargers; USB hardware; computer peripheral devices.

Produits et services

cables, namely, computer cables, computer networking cables, USB cables, audio/video cables; adapters, namely, power adapters, electrical adapters; electrical power cords; surge suppressors; surge protectors; charging carts specially adapted for use with tablets, laptops, computers; power supplies; uninterruptible power supplies; video monitors; video displays that may be attached to workstations; battery chargers; USB hardware; computer peripheral devices

Produits et services

Power overload isolation system comprised of power monitoring sensors, electric switches, and breakers sold as an integral component of electrical power distribution units

Produits et services

Golf Club Grips.

Produits et services

Electrical power distribution assemblies for multiple outlets; KVM switches; auxiliary power supplies; Electronic components in the nature of line filters; uninterruptible electrical power supplies; voltage surge suppressors; electronic products, namely, power inverters; battery chargers; battery cases; battery cartridges; isolation transformers; USB hubs; USB hardware; frames, mounting racks and enclosures specially adapted for storing, organizing, and protecting computer hardware and telecommunication equipment; cables, namely, audio cables, audio/video cables, computer cables, computer networking cables, power cables, USB cables and video cables; signal splitters for electronic apparatus; switches for electronic apparatus, namely, computer network switches; cooling devices specially adapted for cooling computers and computer hardware, namely, a heat exchanger, pump and fan that circulate a liquid coolant; fans specially adapted for cooling computer hardware in rack enclosures; notebook computer cooling pads; network management products, namely, SNMP (simple network management protocol) cards; computer hardware for remote monitoring and control of environmental conditions, such as temperature and humidity in network environments; computer hardware for controlling and monitoring UPS (uninterruptible power supply) systems; downloadable computer software for controlling and monitoring UPS (uninterruptible power supply) systems and computer network systems; computer peripherals; remote controls for presentation devices in the nature of computers and projectors; computer carrying cases and bags; audio speakers; mounts and mounting brackets adapted for televisions, video displays and monitors; charging stations in the nature of charging carts with USB charging ports for tablet computers; battery chargers for mobile telephones or tablet computers. Cooling devices other than parts for machines, namely a heat exchanger, pump and fan that circulate a liquid coolant for electronic equipment; electric fans for cooling computer hardware in rack enclosures.

Produits et services

Digital technology platform, software development components and software solutions, namely, recorded and downloadable software that enables users to manage energy and electrical power use in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery, electric vehicles and electrified aircraft; software, namely, recorded and downloadable software that enables users to manage energy and electrical power for improving energy efficiency and reliability and to manage the availability, reliability and optimization of electrical power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery, electric vehicles and electrified aircraft; Internet servers that incidentally provide data, downloadable software and visualization for electrical power management, facility and process management

Produits et services

Provision of an online marketplace for buyers and sellers of online non-downloadable software and downloadable software and integrated hardware for electrical equipment and machinery, industrial equipment and machinery, facilities and buildings, aircraft and engine equipment, and vehicle equipment

Produits et services

Design of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of automation, power distribution, power efficiency, power quality, and power management; product development of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of power distribution, automation, power quality, and power management; analysis of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for use in the field of analyzing and evaluating power requirements to determine conformity with certification standards; consultancy services regarding the design of systems useful in management, availability, reliability and optimization of power in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft, namely, integrated monitoring and control systems for power automation, power quality, efficiency, and management; automation, facility and process management, control, measurement and monitoring services, namely, remote monitoring services to manage the availability, reliability and optimization of power for quality control purposes where such power is provided in industrial facilities and processes, commercial and residential buildings, in infrastructure, utilities, data centers, machinery applications, vehicles and aircraft; computer project management services for maintenance, repair and overhaul of electrical and industrial equipment being power distribution and monitoring equipment, power quality equipment, power maintenance equipment, and telecommunication equipment used in construction projects

Produits et services

(1) Clothing, shirts, jackets, caps, gloves, shoes, socks, rainwear, towels, head covers, belts (2) Golf club grips, golf bags, golf club head covers, golf accessories

Produits et services

clothing, shirts, jackets, caps, gloves, shoes, socks, rainwear, head covers, belts. golf club grips, golf bags, golf club head covers, golf accessories.

Produits et services

Online and downloadable software, services and gateways configured to connect with IT networks for providing data storage and visualization in various styles and formats accessible from a browser.

Produits et services

Remote monitoring of equipment for fluid hydraulic pumps and pumping systems, and irrigation systems for use in agricultural, industrial, mining, and commercial applications, for quality control purposes

Produits et services

(1) Power management products, software and services, and electrical interconnected products and software for homes, buildings, data centers, utilities, commercial establishments, and industrial environments that enable customers to safely and optimally integrate distributed energy resources such as renewables, energy storage and EV infrastructure to reduce carbon footprint. Product development and engineering services in the fields of power management and power quality products and services for the industrial, electrical, fluid power, hydraulics, filtration, aerospace, automotive, truck, and vehicle industries

Produits et services

Power management products, software and services, and electrical interconnected products and software for homes, buildings, data centers, utilities, commercial establishments, and industrial environments that enable customers to safely and optimally integrate distributed energy resources such as renewables, energy storage and EV infrastructure to reduce carbon footprint; Product development and engineering services in the fields of power management and power quality products and services for the industrial, electrical, fluid power, hydraulics, filtration, aerospace, automotive, truck, and vehicle industries.

Produits et services

Product development and engineering services in the fields of power management and power quality products and services for the industrial, electrical, fluid power, hydraulics, filtration, aerospace, automotive, truck, and vehicle industries

Produits et services

Electrical power and control system for managing and controlling electricity usage, selecting, and accessing sources of renewable electrical power comprising electrical power distribution units, wireless and wired controllers connected to the electrical power grid for distributing electrical power from batteries, solar panels, and sources of renewable electrical power; Home and office electrical power automation systems comprising wireless and wired controllers, controlled devices, and downloadable and recorded software for appliances, lighting, HVAC, security and other home and office electrical power monitoring and control applications

Produits et services

(1) Golf Club Grips

Produits et services

Golf Club Grips.

Produits et services

Golf club grips

Produits et services

Vacuum capacitor switches used in the transmission and distribution of electrical power for a three phase system that operates independently or electronically linked to a control system

Produits et services

(1) Three phase vacuum capacitor switches;

Produits et services

Integrated computer hardware and software, namely, a network connectivity card featuring software for real-time monitoring and managing of uninterruptible electrical power supply systems and batteries, and the electrical power infrastructure. Real-time monitoring and managing of uninterruptible electrical power supply systems and batteries for quality control and to ensure proper functioning, namely, to identify problems before they arise, to increase electrical power reliability and reduce down time; providing electrical power infrastructure monitoring for quality control purposes.

Produits et services

Integrated computer hardware and recorded computer software stored on a network connectivity card for real-time monitoring and managing of uninterruptible electrical power supply systems and batteries, and the electrical power infrastructure Real-time monitoring and quality management services, namely, quality evaluation and control in the field of uninterruptible electrical power supply systems and batteries to ensure proper functioning, to identify problems before they arise, and to increase electrical power reliability and reduce down time; providing electrical power infrastructure monitoring services for quality control purposes

Produits et services

(1) Golf Club Grips

Produits et services

Golf Club Grips.

Produits et services

Micro data centers, namely, information technology infrastructure equipment comprising mounting racks for computer hardware, computer hardware, and electronics equipment for power distribution and management, network management, and environmental management in the nature of electrical power distribution units, computers for network management and electronic-based instruments for measuring environmental parameters including temperature, humidity and air quality

Abrégé

A deactivating rocker arm can include an outer arm extending between a first end and a second end. The outer arm can have a first outer side arm and a second outer side arm. The first and second outer side arms can define outer pivot axle apertures and axle slots. The inner arm can be disposed between the first and second outer side arms. The inner arm can have a first inner side arm and a second inner side arm. The first and second inner side arms can define bearing apertures. A bearing can be mounted in the bearing apertures of the inner arm and the axle slots of the outer arm. The axle slots can be configured to permit lost motion movement of the bearing. A first biasing member can be disposed on the second end of the outer arm and in biasing contact with the bearing.

Classes IPC  ?

• F01L 1/18 - Bras basculants ou leviers
• F01L 13/00 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée
• F01L 1/46 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage - Parties constitutives, détails ou accessoires, non couverts par un des sous-groupes précédents

Abrégé

An exhaust valve rocker arm assembly selectively opening first and second exhaust valves. The assembly includes an exhaust rocker arm and a valve bridge operably associated with the rocker arm and including a main body and a lever rotatably coupled to the main body. The main body is configured to engage the first exhaust valve, and the lever is configured to engage the second exhaust valve.

Classes IPC  ?

• F01L 1/18 - Bras basculants ou leviers
• F01L 13/06 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée pour le freinage
• F01L 1/26 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage particuliers aux "machines" ou machines motrices ayant plus de deux soupapes de levage par cylindre
• F01L 1/24 - Réglage ou compensation des jeux automatique au moyen d'un fluide, p.ex. hydrauliquement
• F01L 13/00 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée

Abrégé

A rocker arm assembly includes an outer arm having first and second low lift lobe contacting surfaces, an inner arm, and a latch assembly. The inner arm includes first and second opposed sidewalls extending between a first end and a second end, and a high lift lobe contacting surface disposed between the first and second opposed sidewalls. The first end is pivotably secured to the outer arm and operably associated with an engine valve, and the second end is operably associated with a lash adjuster and defining a latch bore. The latch assembly is movable between a first configuration and a second configuration. In the first configuration, the latch assembly engages the outer arm such that the outer arm rotates with the inner arm, and in the second configuration, the latch assembly disengages the outer arm such that the outer arm rotates independently from the inner arm.

Classes IPC  ?

• F01L 1/00 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage
• F01L 1/18 - Bras basculants ou leviers
• F01L 13/00 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée
• F02M 26/01 - Recirculation des gaz d’échappement internes, c. à d. où les gaz d’échappement résiduels sont piégés dans le cylindre ou repoussés du collecteur d’admission ou d’échappement vers la chambre de combustion sans l’utilisation de passages additionnels
• F01L 1/047 - Arbres à cames
• F01L 1/46 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage - Parties constitutives, détails ou accessoires, non couverts par un des sous-groupes précédents
• F02D 13/02 - Réglage de la puissance du moteur par variation des caractéristiques de fonctionnement de la soupape d'admission ou de la soupape d'échappement, p.ex. réglage de la durée d'admission ou d'échappement pendant la marche du moteur
• F01L 1/24 - Réglage ou compensation des jeux automatique au moyen d'un fluide, p.ex. hydrauliquement
• F01L 1/08 - Forme des cames
• F01L 1/20 - Réglage ou compensation des jeux

Abrégé

A vapor impermeable solenoid includes an outer housing fabricated from a vapor impermeable material configured to prevent fuel vapor molecules from passing therethrough; windings configured to generate a magnetic flux when energized, a flux collector configured to direct the magnetic flux, a pole piece, and a magnetic armature disposed within the housing and coupled to a seal configured to selectively seal a passage that allows fuel vapor to pass to a purge canister. The magnetic armature is configured to move from a first position to a second position when an electric current is applied to the windings.

Classes IPC  ?

• F02M 25/08 - Appareils spécifiques conjugués aux moteurs pour ajouter des substances non combustibles ou de petites quantités de combustible secondaire, à l’air comburant, au combustible principal ou au mélange air-combustible ajoutant des vapeurs combustibles aspirées des réservoirs de combustible du moteur
• B60K 15/03 - Réservoirs de carburant
• B60K 15/035 - Réservoirs de carburant caractérisés par de moyens d'aération
• F16K 31/02 - Moyens de fonctionnement; Dispositifs de retour à la position de repos magnétiques
• H01F 7/08 - Electro-aimants; Actionneurs comportant des électro-aimants avec armatures
• H01F 7/129 - Encapsulation, mise sous enveloppe ou scellement d'armatures
• H01F 7/16 - Armatures à mouvement rectiligne
• H01F 27/29 - Bornes; Aménagements de prises
• H01F 27/32 - Isolation des bobines, des enroulements, ou de leurs éléments

Abrégé

A valve train assembly includes a first exhaust valve, a second exhaust valve, and a valve bridge including a main body and a lever rotatably coupled to the main body, the main body configured to engage the first exhaust valve, and the lever configured to engage the second exhaust valve. An exhaust valve rocker arm assembly is configured to selectively open the first and second exhaust valves, the exhaust valve rocker arm assembly including an exhaust valve rocker arm with a hydraulic lash adjuster (HLA) assembly coupled thereto, the HLA assembly in contact with the valve bridge main body. An engine brake rocker arm assembly is configured to selectively open the second exhaust valve and including an engine brake rocker arm with a combined HLA and added motion capsule coupled thereto. The combined HLA and added motion capsule is configured to selectively engage and rotate the lever.

Classes IPC  ?

• F01L 13/06 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée pour le freinage
• F01L 1/18 - Bras basculants ou leviers
• F01L 1/24 - Réglage ou compensation des jeux automatique au moyen d'un fluide, p.ex. hydrauliquement
• F01L 1/26 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage particuliers aux "machines" ou machines motrices ayant plus de deux soupapes de levage par cylindre
• F01L 1/46 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage - Parties constitutives, détails ou accessoires, non couverts par un des sous-groupes précédents

Produits et services

Golf Club Grips.

Produits et services

Golf Club Grips

Produits et services

(1) Golf Club Grips

Abrégé

A transmission system selectively coupled to an engine crankshaft of an internal combustion engine arranged on a vehicle includes a waste heat recovery (WHR) system, a brake assembly and a phase-change thermal heat storage system. The WHR system selectively circulates a WHR fluid in the transmission system. The brake assembly selectively couples a transmission output shaft to a drive axle. The brake assembly is configured to operate in a braking mode that retards relative rotation between the transmission output shaft and the drive axle while generating heat. The heat storage system includes a housing defining at least one cavity and a fluid transfer manifold. A phase-change material is disposed in the cavity that is configured to change phase during the braking mode. The WHR system circulates the WHR fluid through the fluid transfer manifold collecting braking heat to be used at a later time in the form of driveline power.

Classes IPC  ?

• B60K 6/12 - Les moteurs primaires comportant des moteurs à combustion et des moyens d'accumulation d'énergie mécanique ou fluide au moyen d'un accumulateur à fluide rechargeable
• F01K 23/02 - Ensembles fonctionnels caractérisés par plus d'une machine motrice fournissant de l'énergie à l'extérieur de l'ensemble, ces machines motrices étant entraînées par des fluides différents les cycles de ces machines motrices étant couplés thermiquement
• B60L 7/28 - Freinage par courants de Foucault
• B60T 1/06 - Aménagements des éléments de freinage, c. à d. des parties de ceux-ci dans lesquelles se produit l'effet de freinage en agissant par retardement des roues par action autre que sur la bande de roulement, p.ex. par action sur une jante, un tambour, un disque ou sur la transmission
• F01K 23/14 - Ensembles fonctionnels caractérisés par plus d'une machine motrice fournissant de l'énergie à l'extérieur de l'ensemble, ces machines motrices étant entraînées par des fluides différents les machines motrices étant couplées mécaniquement comprenant au moins un moteur à combustion
• F01K 25/08 - Ensembles fonctionnels ou machines motrices caractérisés par l'emploi de fluides énergétiques particuliers non prévus ailleurs; Ensembles fonctionnant selon un cycle fermé, non prévus ailleurs utilisant des vapeurs particulières
• F01K 23/06 - Ensembles fonctionnels caractérisés par plus d'une machine motrice fournissant de l'énergie à l'extérieur de l'ensemble, ces machines motrices étant entraînées par des fluides différents les cycles de ces machines motrices étant couplés thermiquement la chaleur de combustion provenant de l'un des cycles chauffant le fluide dans un autre cycle
• F01K 23/10 - Ensembles fonctionnels caractérisés par plus d'une machine motrice fournissant de l'énergie à l'extérieur de l'ensemble, ces machines motrices étant entraînées par des fluides différents les cycles de ces machines motrices étant couplés thermiquement la chaleur de combustion provenant de l'un des cycles chauffant le fluide dans un autre cycle le fluide à la sortie de l'un des cycles chauffant le fluide dans un autre cycle

Abrégé

A combined exhaust and engine brake rocker arm assembly configured to selectively open first and second exhaust valves, includes a rocker arm body, an exhaust rocker arm assembly formed in the rocker arm body, and an engine brake rocker arm assembly formed in the rocker arm body and configured to operate in a collapse mode and a rigid mode. The exhaust rocker arm assembly is configured to selectively engage a valve bridge to open the first and second exhaust valves, and the engine brake rocker arm assembly is configured to selectively engage the valve bridge to open only the first exhaust valve.

Classes IPC  ?

• F01L 1/18 - Bras basculants ou leviers
• F01L 1/24 - Réglage ou compensation des jeux automatique au moyen d'un fluide, p.ex. hydrauliquement
• F01L 1/26 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage particuliers aux "machines" ou machines motrices ayant plus de deux soupapes de levage par cylindre
• F01L 13/06 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée pour le freinage
• F16K 15/04 - Soupapes, clapets ou valves de retenue à corps de soupapes rigides guidés en forme de sphère
• F16K 15/18 - Soupapes, clapets ou valves de retenue à mécanisme de commande; Soupape de retenue et soupape à mécanisme de commande combinées
• F01L 1/053 - Arbres à cames du type en tête

Abrégé

A hydraulic control unit that delivers hydraulic fluid to a limited slip differential includes a hydraulic control unit housing, a vent hole and first and second passageways. The hydraulic control unit housing has an accumulator housing portion that houses a biasing assembly and a piston. The accumulator housing portion forms an accumulator chamber with the piston. The vent hole is defined in the hydraulic control unit housing. The first passageway is defined in the hydraulic control unit housing. The second passageway is defined in the hydraulic control unit housing that intersects the vent hole and is oriented at a different angle than the first passageway. The vent hole is dual purpose permitting hydraulic fluid entry into the accumulator chamber through the second passageway while air is permitted to escape the hydraulic control unit housing through the vent hole.

Classes IPC  ?

• F15B 1/22 - Structure des orifices de passage de liquide
• B60K 17/16 - Agencement ou montage des transmissions sur les véhicules caractérisées par la disposition, l'emplacement ou le type de mécanisme de transmission du différentiel
• F15B 1/24 - Accumulateurs utilisant un coussin de gaz; Dispositifs de remplissage de gaz; Indicateurs ou flotteurs à cet effet avec des moyens de séparation rigides, p.ex. pistons
• F16H 48/32 - Dispositions pour supprimer ou modifier l'action différentielle, p.ex. dispositifs de verrouillage utilisant des moyens actionnés de l'extérieur utilisant des actionneurs à pression de fluide
• F16H 48/22 - Dispositions pour supprimer ou modifier l'action différentielle, p.ex. dispositifs de verrouillage utilisant des embrayages ou des freins à friction

Abrégé

An apparatus includes an anvil having a first end and second end, and a press head reciprocally mounted relative to the anvil. The apparatus further includes an induction heater having a workpiece discharge end mounted adjacent the first end of the anvil, and a plurality of first station dies secured to the anvil. The first station dies each form at least a portion of a first contour. A plurality of second station dies are also secured to the anvil, the second station dies each defining at least a portion of a second contour.

Classes IPC  ?

• B21J 5/02 - Matriçage; Ebarbage par utilisation de matrices particulières
• B21J 9/08 - Presses à estamper; Presses à refouler équipées de dispositifs de chauffage de la pièce
• B21J 13/06 - Chabottes; Enclumes; Blocs d'enclume
• B21K 27/02 - Dispositifs d'alimentation pour barres, fils ou bandes
• B21J 1/06 - Méthodes ou dispositifs de chauffage ou de refroidissement spécialement adaptés aux opérations de forgeage ou de pressage
• B21J 9/02 - Réalisations ou structures particulières

Abrégé

A pump assembly for a liquid trap of a vehicle fuel tank assembly includes a pump configured to couple to the liquid trap and selectively drain liquid therefrom, a sensor configured to monitor an inductive signature of the pump, and a controller programmed to operate the pump and monitor the inductive signature to determine if liquid is present in the liquid trap based on the monitored inductive signature.

Classes IPC  ?

• F02M 37/10 - Alimentation au moyen de pompes entraînées entraînées par moyen électrique immergées dans le combustible, p.ex. dans le réservoir
• F02D 41/30 - Commande de l'injection de combustible
• F02D 41/00 - Commande électrique de l'alimentation en mélange combustible ou en ses constituants
• F02M 25/08 - Appareils spécifiques conjugués aux moteurs pour ajouter des substances non combustibles ou de petites quantités de combustible secondaire, à l’air comburant, au combustible principal ou au mélange air-combustible ajoutant des vapeurs combustibles aspirées des réservoirs de combustible du moteur
• B60K 15/077 - Réservoirs de carburant avec des moyens pour modifier ou commander la distribution ou les mouvements du carburant, p.ex. pour empêcher le bruit, les oscillations, l'éclaboussement ou le manque de carburant
• B60K 15/035 - Réservoirs de carburant caractérisés par de moyens d'aération
• B60K 15/03 - Réservoirs de carburant

Abrégé

A method of providing a rocker arm set for a valvetrain includes providing a first rocker arm configured as a switching rocker arm for a first intake valve, and providing a second rocker arm configured as a fixed rocker arm for a second intake valve, the second rocker arm operating in a normal Otto cycle mode. The first rocker arm operates in a late intake valve closing (LIVC) mode where the first rocker arm is configured to close the first intake valve later than the second intake valve.

Classes IPC  ?

• F01L 13/00 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée
• F01L 1/08 - Forme des cames
• F01L 1/18 - Bras basculants ou leviers
• F01L 1/24 - Réglage ou compensation des jeux automatique au moyen d'un fluide, p.ex. hydrauliquement
• F01L 1/46 - Systèmes de distribution à soupapes, p.ex. à soupapes de levage - Parties constitutives, détails ou accessoires, non couverts par un des sous-groupes précédents
• F01L 13/06 - Modifications du système de distribution pour permettre l'inversion du sens de marche, le freinage, le démarrage, le changement de taux de compression ou autre opération déterminée pour le freinage
• F01L 1/14 - Poussoirs; Tiges-poussoirs

Abrégé

A sensor adapter assembly configured to couple a vapor pressure sensor to a fuel tank includes a base housing configured to couple to the fuel tank, and an insert adapter coupled to the base housing. The insert adapter defines a sensor insertion aperture configured to provide fluid communication to a space inside the fuel tank. The insert adapter is configured to couple to the vapor pressure sensor such that at least a portion of the vapor pressure sensor extends through the sensor insertion aperture into the space inside the fuel tank.

Classes IPC  ?

• B60K 15/035 - Réservoirs de carburant caractérisés par de moyens d'aération
• B60K 15/03 - Réservoirs de carburant

Abrégé

A method of determining clutch torque for a limited slip differential gear mechanism on a vehicle includes obtaining an estimated driveline torque. A desired bias torque is established. A necessary clutch torque required to achieve the desired bias torque is determined. The necessary clutch torque is commanded based on the estimated driveline torque to achieve the desired bias torque.

Classes IPC  ?

• F16H 48/22 - Dispositions pour supprimer ou modifier l'action différentielle, p.ex. dispositifs de verrouillage utilisant des embrayages ou des freins à friction
• F16H 59/56 - Entrées de commande vers des transmissions transmettant un mouvement rotatif pour changements de vitesse ou pour mécanismes d'inversion  les entrées étant fonction de l'état de la machine, p.ex. de la position des portes ou des ceintures de sécurité fonction des signaux venant de l'embrayage principal
• B60K 17/16 - Agencement ou montage des transmissions sur les véhicules caractérisées par la disposition, l'emplacement ou le type de mécanisme de transmission du différentiel

Produits et services

(1) Electric circuit breakers, residual current circuit breakers, circuit breakers, namely, electric circuit interrupters, fuses, electric switches, namely, power switches, electric relays, over-current electrical protectors, namely, surge protectors, fuses, circuit breakers, surge protectors, power quality conditioners, namely, power line conditioners, electrical power distribution units, electrical components in the nature of electric contactors, electrical junctions, namely, electric junction boxes, battery management system comprising computer hardware and software for the control of the charge and discharge of batteries, circuit overload protector devices, namely, voltage surge protectors, electrical switches, namely, voltage interrupters, electrical disconnect switches, emergency power switch, circuit breakers, battery overload protectors, namely, fuses, electronic power conversion devices, namely, battery equalizer, automotive battery charger, electric meters, namely, electric load indicator and electric power indicator, temperature protection system comprising internal or external temperature sensors, solar panel protector comprising electrical overcurrent, short circuit, and emergency power shut-off switches, electrical switches, namely, fuel cell protector switches, all of the foregoing for use in vehicles (2) Variable frequency driving motors for land vehicles

Produits et services

Electric motor starters, variable frequency drives for motors, other than for land vehicles, for use in stationary applications. Electric circuit breakers; residual current circuit breakers; circuit breakers, namely, electric circuit interrupters; fuses; electric switches; electric relays; over-current electrical protectors, namely, surge protectors; circuit breakers; surge protectors; power quality conditioners, namely, power line conditioners; electrical power distribution units; electrical components in the nature of electric contactors; electrical junctions, namely, electric junction boxes; battery management system comprising computer hardware and software for the control of the charge and discharge of batteries; circuit overload protector devices; electrical switches, namely, voltage interrupters; electrical disconnect switches; emergency power switch; battery overload protectors, namely, fuses; electronic power conversion devices, namely, battery equalizer; battery charger; electric meters, namely, electric load indicator and electric power indicator; temperature protection system comprising internal or external temperature sensors; electrical switches; solar panel protector comprising electrical overcurrent; short circuit, and emergency power shut-off switches; electrical switches, namely, fuel cell protector switches; all of the foregoing for use in vehicles or stationary applications. Variable frequency driving motors for land vehicles.

Abrégé

An engine roller lifter for use in a valve train of an internal combustion engine according to one example of the present disclosure includes a body and a groove formed in the body. The body has an outer peripheral surface configured for sliding movement in a bore provided in the engine. The bore is supplied by an oil passage communicating therewith. The body defines an axial pocket that receives a plunger therein. The groove is inset from the outer peripheral surface and formed about only a portion of a circumference of the body. The groove defines a first end and a second end. Only a portion of the first and second ends overlap with the oil passage to regulate the amount of oil supplied to the groove from the oil passage.

Classes IPC  ?

• F01M 9/10 - Lubrification des systèmes de soupapes ou des auxiliaires
• F01L 1/14 - Poussoirs; Tiges-poussoirs
• B23C 3/30 - Fraisage de rainures droites, p.ex. de rainures de clavette
• F01L 1/245 - Poussoirs hydrauliques

Abrégé

A method of providing limited slip in a differential assembly includes interconnecting an axle and a differential assembly through a first slippable linkage. The axle is driven in rotation with a first housing of the differential assembly operable to be driven in rotation by a ring gear. A plurality of pinion gears of the differential assembly are positioned in the first housing and are driven in rotation by the first housing. A side gear is fixed to the axle and is meshed with at least some of the pinion gears. The axle is operable to slip relative to the first housing. The first housing, the plurality of pinion gears and the side gear are enclosed within a second housing. The axle extends from a first end positioned within both of the first housing and the second housing to a second end positioned outside of both of the first housing and the second housing.

Classes IPC  ?

• F16H 48/22 - Dispositions pour supprimer ou modifier l'action différentielle, p.ex. dispositifs de verrouillage utilisant des embrayages ou des freins à friction
• B60K 17/16 - Agencement ou montage des transmissions sur les véhicules caractérisées par la disposition, l'emplacement ou le type de mécanisme de transmission du différentiel
• F16H 48/38 - Transmissions différentielles - Détails de structure
• F16H 48/08 - Transmissions différentielles avec des engrenages à mouvement orbital  avec des engrenages orbitaux coniques
• F16H 48/32 - Dispositions pour supprimer ou modifier l'action différentielle, p.ex. dispositifs de verrouillage utilisant des moyens actionnés de l'extérieur utilisant des actionneurs à pression de fluide

Produits et services

GOLF CLUB GRIP.

Abrégé

A transmission system constructed in accordance to one example of the present disclosure includes an aftertreatment system and a controller. The transmission system is selectively coupled to an engine crankshaft of an internal combustion engine arranged on a vehicle. The aftertreatment system reduces emissions in an exhaust of the internal combustion engine. The controller operates in an aftertreatment heat-up mode such that the aftertreatment system is heated up to an elevated temperature and emissions are thereby reduced based on the elevated temperature. The controller operates in the aftertreatment heat-up mode when the internal combustion engine is operating at or below a brake mean effective pressure between three and four bar. The aftertreatment heat-up mode comprises increasing load on the internal combustion engine.

Classes IPC  ?

• B60K 6/48 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par l'architecture du véhicule électrique hybride du type parallèle
• B60K 6/24 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par des appareils, des organes ou des moyens spécialement adaptés aux VEH caractérisés par les moteurs à combustion
• B60K 6/36 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par des appareils, des organes ou des moyens spécialement adaptés aux VEH caractérisés par les transmissions à engrenages
• B60K 6/26 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par des appareils, des organes ou des moyens spécialement adaptés aux VEH caractérisés par les moteurs ou les générateurs
• B60K 6/28 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par des appareils, des organes ou des moyens spécialement adaptés aux VEH caractérisés par les moyens d'accumulation d'énergie électrique, p.ex. les batteries ou les condensateurs
• B60K 11/06 - Dispositions des ensembles de propulsion relatives au refroidissement avec refroidissement par air
• F02D 41/02 - Dispositions de circuits pour produire des signaux de commande
• F02D 17/02 - Mise hors circuit
• F02D 41/00 - Commande électrique de l'alimentation en mélange combustible ou en ses constituants

Abrégé

An electronically locking differential assembly constructed in accordance to the present disclosure includes a differential casing, a first and second side gear, a lock actuation assembly and a lock detect mechanism. The first gear defines a first shaft opening configured to provide a first torque transmitting connection with a first output shaft received within the first output shaft opening. The second side gear defines a second output shaft opening configured to provide a second torque transmitting connection with a second output shaft received within the second output shaft opening. The lock actuation mechanism selectively moves between a locked state where the side gears are fixed for concurrent rotation and an unlocked state where the side gears rotate relative to each other. The lock detect mechanism detects whether the lock actuation mechanism is in the locked or unlocked state.

Classes IPC  ?

• F16H 48/34 - Dispositions pour supprimer ou modifier l'action différentielle, p.ex. dispositifs de verrouillage utilisant des moyens actionnés de l'extérieur utilisant des actionneurs électromagnétiques ou électriques
• F16H 48/40 - Transmissions différentielles - Détails de structure caractérisés par des particularités des carters rotatifs

Abrégé

A transmission system selectively coupled to an engine crankshaft of an internal combustion engine arranged on a vehicle includes a transmission, a motor generator, a master clutch and a controller. The transmission includes an input shaft, a mainshaft, an output shaft and a countershaft offset from the input shaft. The countershaft is drivably connected to the first input shaft and the mainshaft. The motor generator is selectively coupled to the countershaft. The master clutch includes a driving portion connected to the engine crankshaft and a driven portion coupled to the transmission input shaft and adapted to frictionally engage the driving portion between open and closed positions. The controller selectively operates the transmission system in a first operating mode that includes defueling the engine while the vehicle is moving based on vehicle operating conditions and routes rotational energy from the output shaft, through the countershaft and into the motor generator.

Classes IPC  ?

• B60K 6/48 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par l'architecture du véhicule électrique hybride du type parallèle
• F16H 3/093 - Transmissions à engrenages pour transmettre un mouvement rotatif à rapport de vitesse variable ou pour inverser le mouvement rotatif sans engrenages à mouvement orbital exclusivement ou principalement à engrenages constamment en prise, pouvant être libérés de leurs arbres caractérisés par l'agencement des engrenages avec plusieurs arbres de renvoi
• B60K 6/365 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par des appareils, des organes ou des moyens spécialement adaptés aux VEH caractérisés par les transmissions à engrenages les pignons étant animés d'un mouvement orbital
• B60W 30/18 - Propulsion du véhicule
• B60K 6/547 - Transmission pour rapport variable la transmission étant un changement de vitesse à variation discontinue
• B60K 6/387 - Embrayages actionnés, c.-à-d. embrayages mis en prise ou désaccouplés par des moyens d'actionnement électriques, hydrauliques ou mécaniques
• B60W 30/19 - Amélioration du changement de vitesse, p.ex. en synchronisant ou en adoucissant le changement de rapport
• B60K 6/26 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par des appareils, des organes ou des moyens spécialement adaptés aux VEH caractérisés par les moteurs ou les générateurs

Produits et services

(1) GOLF CLUB GRIPS

Abrégé

Terminal assemblies for power receptacles or switches or other electrical devices include a first terminal holding a first terminal screw and a second terminal adjacent the first terminal and holding a second terminal screw. The terminal assembly also includes a thermal protection plate having longitudinally opposed first and second end portions, the first end portion affixed to the first terminal and the second end portion attached to the second terminal. The thermal protection plate has an electrical conductive contact residing between the first and second end portions, closer to the second end portion than the first end portion. The thermal protection plate has a first material with a first thermal coefficient of expansion overlying or underlying a second material with a second thermal coefficient of expansion with the second thermal coefficient of expansion greater than the first thermal coefficient of expansion.

Classes IPC  ?

• H01R 13/713 - Association structurelle avec des composants électriques incorporés avec interrupteur incorporé l'interrupteur étant un interrupteur de sécurité
• H01H 37/52 - Interrupteurs actionnés thermiquement - Détails Éléments thermosensibles actionnés par la déviation d'un bilame

Abrégé

A tappet, which may be a fuel pump actuator, includes a body that is a contiguous piece of case-hardened ferrous metal. The body has a cylinder-conforming bore-running surface and an anti-rotation guide feature that has been made by stamping to project outwardly from the bore-running surface. A cam follower is mounted to the body. The body has been case hardened by ferritic nitrocarburizing, but has not been distorted by heat treatment and has a malleable interior. A transverse web for the tappet may be fully hardened. Axle holes for the cam follower may be formed by stamping. The tappet is durable and provides superior alignment of the roller to a cam, which reduces friction and noise.

Classes IPC  ?

• F01L 1/14 - Poussoirs; Tiges-poussoirs
• B21D 22/02 - Estampage utilisant des dispositifs ou outils rigides
• B21D 22/20 - Emboutissage

Produits et services

Explosion proof metal boxes; metal conduit boxes, metal conduits, metal pipe fittings, metal conduit fittings, metal bolts and nuts, metal elbows for pipes and conduits, metal clamps for general use, metal pipe and conduit connectors, structural joint connectors of metal, metal sealing caps; metal boxes sold empty for use as electronics enclosures; metal hardware, namely, metal bolts and nuts for general use; metal stabilizers for metal structural joint connectors; metal supports for pipes and structural joint connectors; metal mounting brackets for general use; metal pipe hangers; metal cable clamps; metal pipe clips, metal cable clips; metal framing adapted for assembly into racks, scaffolds, supports and hangers; high pressure underwater non-electric metal cables and metal clips and supports therefor; strut systems and bolted framing strut systems, namely, bolted metal struts for pipe and conduit support, cable management, datacomm equipment support, and HVAC duct support, and metal fasteners and fittings therefor; cable tray systems, namely, metal cable trays used in building construction; metal pipe supports; metal safety gratings for stairs and walkways; seismic bracings, namely, metal construction braces and metal braces for handling loads; T-bar supports and T-bar fasteners, namely, metal hangers for hanging items installed in a suspended ceiling, and metal fasteners therefor; Z purlin hangers, namely, metal hangers for purlins; construction elements in the nature of metal retainer levelers in the form of wall-opening braces; metal pulleys, other than for machines; metal rollers for cables; construction elements, namely, metal sway braces and metal studwire insulation protectors; universal beam clamps of metal; metal splice plates for railway tracks; adjustable metal splice plates for railway tracks Visual and audible signaling and warning devices and navigation aids, namely, emergency lighting in the nature of warning lights and alarms, and illuminated exit signs; floodlights, incandescent lights, LED luminaires, induction lighting, and strobe lights for use as emergency warning lights; electrical enclosures, namely, electrical terminal boxes and electric outlet covers; explosion proof electrical load centers for managing and optimizing energy loads within a building; explosion proof panel boards, namely, circuit breaker panel boards; explosion proof clocks, namely, central processing unit clocks; explosion proof telephones; fuses for electric current; fuse holders being fuse clips and panel-mounted fuse holders for use with electronic glass and ceramic fuses; electrical fuses and fuse holders in the nature of fuse clips and panel mounted fuse holders for holding transformer fuses; faulted circuit indicators; advanced metering infrastructure software and devices, namely, water meters, gas meters, and electric meters, for tracking, monitoring, controlling, or reporting energy, gas, and water usage; transformers; transformer switches being electric switches, and structural components therefor; electronic and hydraulically operated reclosers for reclosing interrupted electrical circuits; electrical power distribution sectionalizers in the nature of electrical switches for isolation of faulted sections of electrical circuits; surge arrestors; surge suppressors; power capacitors; distribution automation software and devices, namely, electrical equipment being electrical controlling devices, electricity router for managing and optimizing energy loads within a building, and software for use in monitoring, controlling or automatically rerouting the transmission of electricity in the nature of software for controlling the output of electrical generators, software for distributing electricity in a building or an electrical circuit; volt / VAR optimization software and devices, namely, software used to monitor or control the status of electrical distribution; software used to monitor or control power generation, power consumption, or electrical distribution in the nature of software for controlling output of electrical generators, software for distributing electricity in a building or electrical circuit; fuse wire, and voltage surge protectors for electric circuits with fuse links and thermal cut-outs and that respond to heavy overloads or short circuits to open the circuit; lighting control apparatus, lighting control panels, lighting panel control boards; occupancy sensors for detecting presence of occupants with responsive controllers; electric warning lights; aircraft ground electrical power supplies; electric aviation connectors, namely, electric connectors for use in aircraft; wireless communication devices for voice, data, or image transmission; computer software for wireless content delivery; software for connecting electrical devices, namely, software for connecting a mobile phone to home electric appliances and devices and for controlling home electric appliances and devices; software for communicating with wireless mobile devices, namely, communication software for providing access to the internet; control panels for emergency communication systems; control systems for use in lighting, heating, air, energy, and utilities for residential, commercial, and industrial buildings, namely, lighting control apparatus, electric control devices for heating and energy management, water heater controls, remote control for air-conditioning apparatus; software for use in text-based emergency communication systems for first responders, governments, and agencies; wireless controllers to monitor and control the functioning of LED (light emitting diode) lighting fixtures; computer software for monitoring, control, and predictive maintenance of power substations, radio frequency switches, radio remote control transmitters, namely, software for monitoring the performance of power substations and identifying areas that require maintenance; wireless controllers, namely, lighting control apparatus to monitor and control the functioning of LED (light emitting diode) lighting fixtures, organic light emitting diodes (OLEDs), lighting apparatus for lighting runways, street lights, traffic lights, rail lights, life safety notification lights, lighting poles, electrical hand lamps, multi-lamp lighting, motion activated security lights, architectural lighting fixtures, lighting apparatus for vehicles, explosion proof luminaires, emergency and safety lights, compressed-air luminaires, and strobe lights; junction boxes of metal Electric lighting fixtures, namely, recessed lighting fixtures, track lighting fixtures, pendant lighting fixtures, lighting tracks, lighting tubes, security lighting fixtures, indoor and outdoor lighting fixtures, ceiling lighting fixtures, area lighting fixtures, surface mounted lighting fixtures, wall lighting fixtures, decorative lighting fixtures, landscape lighting fixtures, electric sconces, lighting canopies in the nature of lighting canopies being outdoor lighting fixtures and Light Emitting Diodes (LED) lighting fixtures, lighting fixtures all for sports, entertainment, residential, commercial, industrial, architectural, lighting fixtures for LED illumination and also for way marking lighting applications; Electric lighting components, namely, light bulbs, sockets, light socket extenders, lamp holders in the nature of sconce lighting fixtures, lamp tracks, hanging bars in the nature of hanging lamps, beam concentrators, namely, light reflectors, housings, namely, hanging lamps, trims, namely, recessed light fixtures, modules, namely, LED modules being parts of lighting systems, filters and lenses, namely, optical lens covers that improve light output and uniformity and protect the LED, sold as a feature of an LED lighting system, all for use with electric lighting fixtures; Mechanical and electro-mechanical devices, namely, louvers in the nature of recessed lighting fixtures, shutters in the nature of recessed lighting fixtures, and lamp reflectors for shielding, directing and controlling light, all for use with electric lighting fixtures; architectural suspended solid state lighting products, namely, electrical lighting fixtures, lighting fixtures with motion detection; Recessed lighting fixtures; lighting fixtures; and finishing sections, namely, fittings and parts of electric lighting fixtures, namely, trim and baffles in the nature of recessed lighting fixtures; airport light bases, namely, lighting fixtures for use in airports; airport navigational lights, namely, lighting fixtures for use in airports; floodlights, guidance lights, namely, lighting fixtures; LED (light emitting diode) lighting fixtures for use in sports, entertainment, commercial and industrial lighting applications; floodlights, incandescent light bulbs, and LED luminaires; induction lighting; strobe lights being flashing strobe light apparatus

Produits et services

Explosion proof metal boxes; metal conduit boxes, metal conduits, metal pipe fittings, metal conduit fittings, metal bolts and nuts, metal elbows for pipes and conduits, metal clamps for general use, metal pipe and conduit connectors, structural joint connectors of metal, metal sealing caps; metal boxes sold empty for use as electronics enclosures; metal hardware, namely, metal bolts and nuts for general use; metal stabilizers for metal structural joint connectors; metal supports for pipes and structural joint connectors; metal mounting brackets for general use; metal pipe hangers; metal cable clamps; metal pipe clips, metal cable clips; metal framing adapted for assembly into racks, scaffolds, supports and hangers; high pressure underwater non-electric metal cables and metal clips and supports therefor; strut systems and bolted framing strut systems, namely, bolted metal struts for pipe and conduit support, cable management, datacomm equipment support, and HVAC duct support, and metal fasteners and fittings therefor; cable tray systems, namely, metal cable trays used in building construction; metal pipe supports; metal safety gratings for stairs and walkways; seismic bracings, namely, metal construction braces and metal braces for handling loads; T-bar supports and T-bar fasteners, namely, metal hangers for hanging items installed in a suspended ceiling, and metal fasteners therefor; Z purlin hangers, namely, metal hangers for purlins; construction elements in the nature of metal retainer levelers in the form of wall-opening braces; metal pulleys, other than for machines; metal rollers for cables; construction elements, namely, metal sway braces and metal studwire insulation protectors; universal beam clamps of metal; metal splice plates for railway tracks; adjustable metal splice plates for railway tracks Visual and audible signaling and warning devices and navigation aids, namely, emergency lighting in the nature of warning lights and alarms, and illuminated exit signs; floodlights, incandescent lights, LED luminaires, induction lighting, and strobe lights for use as emergency warning lights; electrical enclosures, namely, electrical terminal boxes and electric outlet covers; explosion proof electrical load centers for managing and optimizing energy loads within a building; explosion proof panel boards, namely, circuit breaker panel boards; explosion proof clocks, namely, central processing unit clocks; explosion proof telephones; fuses for electric current; fuse holders being fuse clips and panel-mounted fuse holders for use with electronic glass and ceramic fuses; electrical fuses and fuse holders in the nature of fuse clips and panel mounted fuse holders for holding transformer fuses; faulted circuit indicators; advanced metering infrastructure software and devices, namely, water meters, gas meters, and electric meters, for tracking, monitoring, controlling, or reporting energy, gas, and water usage; transformers; transformer switches being electric switches, and structural components therefor; electronic and hydraulically operated reclosers for reclosing interrupted electrical circuits; electrical power distribution sectionalizers in the nature of electrical switches for isolation of faulted sections of electrical circuits; surge arrestors; surge suppressors; power capacitors; distribution automation software and devices, namely, electrical equipment being electrical controlling devices, electricity router for managing and optimizing energy loads within a building, and software for use in monitoring, controlling or automatically rerouting the transmission of electricity in the nature of software for controlling the output of electrical generators, software for distributing electricity in a building or an electrical circuit; volt / VAR optimization software and devices, namely, software used to monitor or control the status of electrical distribution; software used to monitor or control power generation, power consumption, or electrical distribution in the nature of software for controlling output of electrical generators, software for distributing electricity in a building or electrical circuit; fuse wire, and voltage surge protectors for electric circuits with fuse links and thermal cut-outs and that respond to heavy overloads or short circuits to open the circuit; lighting control apparatus, lighting control panels, lighting panel control boards; occupancy sensors for detecting presence of occupants with responsive controllers; electric warning lights; aircraft ground electrical power supplies; electric aviation connectors, namely, electric connectors for use in aircraft; wireless communication devices for voice, data, or image transmission; computer software for wireless content delivery; software for connecting electrical devices, namely, software for connecting a mobile phone to home electric appliances and devices and for controlling home electric appliances and devices; software for communicating with wireless mobile devices, namely, communication software for providing access to the internet; control panels for emergency communication systems; control systems for use in lighting, heating, air, energy, and utilities for residential, commercial, and industrial buildings, namely, lighting control apparatus, electric control devices for heating and energy management, water heater controls, remote control for air-conditioning apparatus; software for use in text-based emergency communication systems for first responders, governments, and agencies; wireless controllers to monitor and control the functioning of LED (light emitting diode) lighting fixtures; computer software for monitoring, control, and predictive maintenance of power substations, radio frequency switches, radio remote control transmitters, namely, software for monitoring the performance of power substations and identifying areas that require maintenance; wireless controllers, namely, lighting control apparatus to monitor and control the functioning of LED (light emitting diode) lighting fixtures, organic light emitting diodes (OLEDs), lighting apparatus for lighting runways, street lights, traffic lights, rail lights, life safety notification lights, lighting poles, electrical hand lamps, multi-lamp lighting, motion activated security lights, architectural lighting fixtures, lighting apparatus for vehicles, explosion proof luminaires, emergency and safety lights, compressed-air luminaires, and strobe lights; junction boxes of metal Electric lighting fixtures, namely, recessed lighting fixtures, track lighting fixtures, pendant lighting fixtures, lighting tracks, lighting tubes, security lighting fixtures, indoor and outdoor lighting fixtures, ceiling lighting fixtures, area lighting fixtures, surface mounted lighting fixtures, wall lighting fixtures, decorative lighting fixtures, landscape lighting fixtures, electric sconces, lighting canopies in the nature of lighting canopies being outdoor lighting fixtures and Light Emitting Diodes (LED) lighting fixtures, lighting fixtures all for sports, entertainment, residential, commercial, industrial, architectural, lighting fixtures for LED illumination and also for way marking lighting applications; Electric lighting components, namely, light bulbs, sockets, light socket extenders, lamp holders in the nature of sconce lighting fixtures, lamp tracks, hanging bars in the nature of hanging lamps, beam concentrators, namely, light reflectors, housings, namely, hanging lamps, trims, namely, recessed light fixtures, modules, namely, LED modules being parts of lighting systems, filters and lenses, namely, optical lens covers that improve light output and uniformity and protect the LED, sold as a feature of an LED lighting system, all for use with electric lighting fixtures; Mechanical and electro-mechanical devices, namely, louvers in the nature of recessed lighting fixtures, shutters in the nature of recessed lighting fixtures, and lamp reflectors for shielding, directing and controlling light, all for use with electric lighting fixtures; architectural suspended solid state lighting products, namely, electrical lighting fixtures, lighting fixtures with motion detection; Recessed lighting fixtures; lighting fixtures; and finishing sections, namely, fittings and parts of electric lighting fixtures, namely, trim and baffles in the nature of recessed lighting fixtures; airport light bases, namely, lighting fixtures for use in airports; airport navigational lights, namely, lighting fixtures for use in airports; floodlights, guidance lights, namely, lighting fixtures; LED (light emitting diode) lighting fixtures for use in sports, entertainment, commercial and industrial lighting applications; floodlights, incandescent light bulbs, and LED luminaires; induction lighting; strobe lights being flashing strobe light apparatus