A motion manager mounted on a vehicle includes a processor. The processor receives, from an application that has determined that another object will collide with the vehicle, a motion request indicating that an additional braking force is needed, when the vehicle is stopped. The processor generates an instruction value for causing a brake device to generate a greater braking force than before the motion request is received, when the motion request indicating that the additional braking force is needed is received.
B60T 8/172 - Détermination des paramètres de commande utilisés pour la régulation, p.ex. par des calculs impliquant des paramètres mesurés ou détectés
B60T 7/22 - Organes d'attaque de la mise en action des freins par déclenchement non soumis à la volonté du conducteur ou du passager déclenchés par le contact du véhicule, p.ex. du pare-chocs, avec un obstacle extérieur, p.ex. un autre véhicule
2.
MOTION MANAGER, CONTROL DEVICE OF BRAKE DEVICE, AND CONTROL METHOD
A motion manager that is mounted on a vehicle includes a processor and a memory. The processor receives a motion request that corresponds to an application from individual applications. The processor arbitrates the received motion request. The processor generates, based on an arbitration result, an instruction value of an operation request to be output to a brake control unit. The memory stores, in advance, type information of an actuator to be controlled by the brake control unit. The processor generates the instruction value of the operation request using the type information.
B60T 8/50 - Dispositions pour adapter la force de freinage sur la roue aux conditions propres au véhicule ou à l'état du sol, p.ex. par limitation ou variation de la force de freinage selon une condition de vitesse, p.ex. accélération ou décélération comportant un régulateur de pression fluidique répondant à une condition de vitesse comportant des moyens pour commander la valeur à laquelle la pression est de nouveau appliquée au frein
B60W 10/18 - Commande conjuguée de sous-ensembles de véhicule, de fonction ou de type différents comprenant la commande des systèmes de freinage
A power transmission device includes: a case including a first oil reservoir configured to store oil, a second oil reservoir configured to store the oil, and a partition wall configured to separate the first oil reservoir and the second oil reservoir from each other; the oil enclosed in the case; a rotating member configured to contact the oil in the first oil reservoir; and an opening and closing member located in the partition wall and configured to supply the oil from the second oil reservoir to the first oil reservoir. The oil level in the first oil reservoir when the opening and closing member is open is higher than the oil level in the first oil reservoir when the opening and closing member is closed, and is high enough for at least a part of the rotating member to be dipped in the oil.
F01M 11/00 - LUBRIFICATION DES "MACHINES" OU MACHINES MOTRICES EN GÉNÉRAL; LUBRIFICATION DES MOTEURS À COMBUSTION INTERNE; VENTILATION DU CARTER - Parties constitutives, détails ou accessoires non couverts par les groupes ou présentant un intérêt autre que celui visé par ces groupes
4.
VEHICLE HEADLIGHT SYSTEM, DISPLAY CONTROL METHOD FOR VEHICLE HEADLIGHT SYSTEM, AND NON-TRANSITORY STORAGE MEDIUM
A vehicle headlight system comprises a headlight that irradiates light in front of a host vehicle, a target detection section that is configured to detect a target present in front of the host vehicle, a display that is provided inside a vehicle cabin of the host vehicle, a first memory, a first processor that is coupled to the first memory, a second memory, and a second processor that is coupled to the second memory. The first processor includes a light irradiation control function that is configured to control light distribution of the headlight, based on a detection result by the target detection section. The second processor is configured to determine whether or not the light irradiation control function is in an active state, to control a display mode of the display so as to show a determination result, and in a case in which the light irradiation control function is in the active state, to control the display mode of the display so as to show, in addition to the determination result, a light distribution control state according to the light irradiation control function.
B60Q 1/08 - Agencement des dispositifs de signalisation optique ou d'éclairage, leur montage, leur support ou les circuits à cet effet les dispositifs étant principalement destinés à éclairer la route en avant du véhicule ou d'autres zones de la route ou des environs les dispositifs étant des phares réglables, p.ex. commandés à distance de l'intérieur du véhicule automatiquement
B60K 35/00 - Agencement ou adaptations des instruments
5.
METHOD FOR INSPECTING A POWER STORAGE DEVICE FOR SHORT CIRCUIT AND METHOD FOR MANUFACTURING A CONNECTED RESTRAINED-DEVICE MODULE
A method for inspecting a power storage device for short circuit includes: adjusting a plurality of power storage devices to a first device voltage; restraining the power storage devices; measuring a pre-leaving device voltage, leaving the power storage devices, and measuring a post-leaving device voltage; obtaining a voltage drop rate; and determining whether or not a restrained device is short-circuited using a voltage drop rate. The method further includes: calculating a largest adjustment timing difference between an oldest adjustment completion time of an oldest adjusted device and a newest adjustment completion time of a newest adjusted device, after adjusting the voltage but before measuring the pre-leaving voltage; obtaining a shortest standby time from the largest adjustment timing difference; and deferring the measuring of the pre-leaving voltage until the shortest standby time elapses.
A notification device, comprising a processor, wherein the processor is configured to receive an abnormality notification from an occupant of a vehicle, and in a case in which the abnormality notification has been received, notify a third party of vehicle information including position information of the vehicle and an image of surroundings of the vehicle, which are stored at the vehicle, and notify the third party that the vehicle is in an abnormal situation.
G08B 25/10 - Systèmes d'alarme dans lesquels l'emplacement du lieu où existe la condition déclenchant l'alarme est signalé à une station centrale, p.ex. systèmes télégraphiques d'incendie ou de police caractérisés par le moyen de transmission utilisant des systèmes de transmission sans fil
A route planner detects a pedestrian from surrounding data representing a situation of surroundings of a vehicle, identifies a position of a pause-by object in the surroundings of the vehicle prompting the pedestrian to pause, creating a travel route over which the vehicle will travel when the pedestrian is detected, assuming the pedestrian will enter a road on which the vehicle will travel when the identified position of the pause-by object is not in the vicinity of the pedestrian, and assuming the pedestrian will not enter the road when the identified position of the pause-by object is in the vicinity of the pedestrian.
B60W 60/00 - Systèmes d’aide à la conduite spécialement adaptés aux véhicules routiers autonomes
G06V 20/58 - Reconnaissance d’objets en mouvement ou d’obstacles, p.ex. véhicules ou piétons; Reconnaissance des objets de la circulation, p.ex. signalisation routière, feux de signalisation ou routes
G06V 40/16 - Visages humains, p.ex. parties du visage, croquis ou expressions
8.
INFORMATION PROCESSING DEVICE, VEHICLE, AND INFORMATION PROCESSING SYSTEM
An information processing device calculates a feature related to driving of a driver. The information processing device includes: a processor that calculates the feature; and a transmission unit that transmits the calculated feature to an outside. The processor identifies whether there is a predetermined situation in which a risk in relation to a preceding vehicle occurs, and calculates, as the feature, information related to a behavior of the driver for reducing the risk when the predetermined situation is identified.
A terminal includes: a receiving unit which receives a discontinuous reception parameter for a radio resource control (RRC) idle state and a discontinuous reception parameter for an RRC inactive state; and a control unit which controls a discontinuous reception operation in the RRC inactive state in accordance with the discontinuous reception parameter for the RRC idle state instead of the discontinuous reception parameter for the RRC inactive state.
A manufacturing method of an electrode sheet comprising: a preparation step of preparing a wet granulated body containing an electrode material and a solvent, a film forming step of passing the wet granulated body through a gap between a first roll and a second roll having a solvent absorbing portion on an outer peripheral surface to form an electrode material layer on an outer peripheral surface of the second roll, and a transfer step of transferring the electrode material layer onto a substrate.
A laser radar mounting structure is for mounting a laser radar to a vehicle. The laser radar has an irradiation unit configured to irradiate an electromagnetic wave for detecting an object around the vehicle. The laser radar mounting structure includes: an installation hole provided near a front pillar on a windshield of the vehicle, near a rear pillar on a rear glass of the vehicle, near the front pillar on a roof of the vehicle, or near the rear pillar on the roof of the vehicle; the laser radar provided in the installation hole; and a cover portion that covers the laser radar and transmits the electromagnetic wave. The laser radar is provided in the installation hole such that the irradiation unit faces the outside of the vehicle through the cover portion.
A power reception device includes: a power reception coil that receives power transmitted from a power transmission coil in a non-contact manner; and a control device that executes a short-circuit mode in which a plurality of switching elements provided between the power reception coil and a load are caused to perform switching operations to short-circuit between output terminals of the power reception coil. Further, when a phase of a current and a phase of a voltage in the power reception device are deviated from each other, the control device sets switching timings of the switching elements to the short-circuit mode in a manner that the phase of the voltage is shifted in a direction in which a power factor of power supplied to the load is deteriorated.
H02J 50/12 - Circuits ou systèmes pour l'alimentation ou la distribution sans fil d'énergie électrique utilisant un couplage inductif du type couplage à résonance
Toyota Motor Engineering & Manufacturing North America, Inc. (USA)
Toyota Jidosha Kabushiki Kaisha (Japon)
Inventeur(s)
Lee, Taehwa
Li, Xiaopeng
Yu, Ziqi
Abrégé
A sound absorbing device includes a panel with an opening, a duct extending from the panel and in fluid communication with the opening, and a plurality of acoustic resonators embedded in the panel and in fluid communication with the duct. The duct can have a rectangular cuboid shape and the plurality of acoustic resonators can include a first subset of quarter-wavelength tubes extending from a first planar side of the duct, a second subset of quarter-wavelength tubes extending from a second planar side of the duct, a third subset of quarter-wavelength tubes extending from a third planar side of the duct, and a fourth subset of quarter-wavelength tubes extending from a fourth planar side of the duct. Also, the second subset of quarter-wavelength tubes and the fourth subset of quarter-wavelength tubes can have mirror symmetry with the first subset of quarter-wavelength tubes and the third subset of quarter-wavelength tubes, respectively.
G10K 11/172 - Procédés ou dispositifs de protection contre le bruit ou les autres ondes acoustiques ou pour amortir ceux-ci, en général utilisant des effets de résonance
G10K 11/16 - Procédés ou dispositifs de protection contre le bruit ou les autres ondes acoustiques ou pour amortir ceux-ci, en général
14.
COMMUNICATION APPARATUS, BASE STATION, AND COMMUNICATION METHOD
A communication apparatus, comprises: a receiver configured to receive a radio resource control (RRC) message including information for configuring a cell group from a base station; a transmitter configured to transmit a scheduling request (SR); and a controller configured to control a condition related to monitoring of a physical downlink control channel (PDCCH) in each serving cell in the cell group based on the transmission of the SR or a trigger of the SR.
H04W 72/1263 - Jumelage du trafic à la planification, p.ex. affectation planifiée ou multiplexage de flux
H04W 72/232 - Canaux de commande ou signalisation pour la gestion des ressources dans le sens descendant de la liaison sans fil, c. à d. en direction du terminal les données de commande provenant de la couche physique, p.ex. signalisation DCI
15.
FASTENING WORK MANAGEMENT SYSTEM AND FASTENING WORK CONTROL METHOD
A fastening work management system according to the present disclosure manages a fastening work of fastening a fastened member in a predefined fastening order to a plurality of fastening positions of a target member by using a fastening tool that is grasped and operated by an operator. The fastening work management system includes an image acquisition unit configured to acquire an inspection image including a position defined as a current fastening position in the fastening order included in the fastening work management information when the fastening work of a predetermined fastened member is completed and a detection unit configured to detect whether or not the fastened member, which has been fastened, is present at the current fastening position included in the inspection image.
B25B 21/00 - Outils portatifs à moteur pour serrer ou desserrer les vis ou les écrous; Accessoires pour appareils à percer ayant les mêmes buts
B25B 23/147 - Agencement pour limiter le couple de blocage ou pour indiquer le couple des clés ou des tournevis spécialement adapté aux clés ou tournevis électriques
The abnormal sound diagnostic system of the present disclosure includes an abnormal sound diagnostic system including a diagnostic device for diagnosing abnormal sound generated in a vehicle based on data of sound emitted from a vehicle and inquiry information about abnormal sound generated in a vehicle, the abnormal sound diagnostic system including an calculation processing unit for acquiring a spectrogram indicating a relationship between time, frequency, and sound pressure from the sound data, a voice recognition unit for extracting a vocal time zone that is a time zone including a human voice from the sound data by speech recognition, a display unit for displaying a spectrogram, and a display control unit for causing the display unit to display a spectrogram so that the vocal time zone extracted by the voice recognition unit is visually distinguished from a time zone that does not include a human voice.
G07C 5/08 - Enregistrement ou indication de données de marche autres que le temps de circulation, de fonctionnement, d'arrêt ou d'attente, avec ou sans enregistrement des temps de circulation, de fonctionnement, d'arrêt ou d'attente
G01M 13/028 - Analyse acoustique ou des vibrations
A method for producing a porous body of the present disclosure includes: preparing a solution including a bi- or higher-functional polymerizable monomer and a solvent compatible with the polymerizable monomer, and not including a polymerization initiator; effecting direct radicalization of the polymerizable monomer included in the solution, polymerizing the polymerizable monomer, and forming, from the solution, a phase separation product including a porous body and the solvent; and vaporizing the solvent included in the phase separation product, the solvent including a predetermined solvent such as diethylene glycol diethyl ether.
C09D 4/00 - Compositions de revêtement, p.ex. peintures, vernis ou vernis-laques, à base de composés non macromoléculaires organiques ayant au moins une liaison non saturée carbone-carbone polymérisable
A user equipment 100 to which a plurality of cell groups are configured by a base station 200, comprises the steps of: receiving a switching instruction for giving an instruction about switching of search space set groups (SSSGs) in serving cells belonging to any cell group of the plurality of cell groups from the base station 200; specifying a target cell group as a switching target of the SSSG from among the plurality of cell groups based on a cell identifier or a cell group identifier included in the switching instruction. The UE 100 is configured to simultaneously switch the SSSGs of all the serving cells in the specified target cell group in response to the reception of the switching instruction.
H04W 48/12 - Distribution d'informations relatives aux restrictions d'accès ou aux accès, p.ex. distribution de données d'exploration utilisant un canal de commande descendant
H04W 72/232 - Canaux de commande ou signalisation pour la gestion des ressources dans le sens descendant de la liaison sans fil, c. à d. en direction du terminal les données de commande provenant de la couche physique, p.ex. signalisation DCI
A rear air-conditioning controller can execute limitation on the volume of air to a rear side of a vehicle cabin when a first condition is satisfied. The first condition is a condition where a grille shutter upper or a grille shutter lower is stuck in an open state and a defroster function is in an on state.
An information processing apparatus comprises a controller configured to execute: obtaining, from a user device, a query requesting name resolution of a first device accessible via a wide area network by DNS protocol; obtaining a first IP address, which is an IP address of the first device, based on the query; generating a second IP address that is a dummy IP address corresponding to the first IP address; replacing the first IP address with the second IP address, and transmitting a response to the query to the user device, with the second IP address as result of the name resolution; when a connection request addressed to the second IP address is received from the user device, transmitting the connection request to the wide area network, after replacing a destination from the second IP address to the first IP address.
H04L 61/2539 - Traduction d'adresses de protocole Internet [IP] en gardant les adresses anonymes
H04L 61/4511 - Répertoires de réseau; Correspondance nom-adresse en utilisant des protocoles normalisés d'accès aux répertoires en utilisant le système de noms de domaine [DNS]
H04L 61/5007 - Adresses de protocole Internet [IP]
21.
INFORMATION PROCESSING APPARATUS, INFORMATION PROCESSING METHOD, AND SYSTEM
A controller is provided that is configured to perform: identifying a first user who is a user using a vehicle that is associated with a plurality of users; and transmitting, to a terminal of the first user, information about a parking position of the vehicle when the vehicle is parked, and not transmitting the information about the parking position of the vehicle to a terminal of a second user, who is a user other than the first user among the plurality of users.
B60R 25/33 - Détection relative au vol ou autres événements relatifs aux systèmes antivol de la géo-localisation, p.ex. en fournissant les coordonnées de géo-localisation (GPS)
B60R 25/24 - Moyens pour enclencher ou arrêter le système antivol par des éléments d’identification électroniques comportant un code non mémorisé par l’utilisateur
G07C 9/00 - Enregistrement de l’entrée ou de la sortie d'une entité isolée
A drive unit may be configured to drive a pair of left and right wheels of a vehicle. The drive unit may include: a motor; a planetary gear mechanism including a sun gear; a parallel gear coaxially fixed to a carrier; a first and bearing rotatably supporting the carrier and the parallel gear; and a differential mechanism meshing with the parallel gear and configured to distribute power from the parallel gear to the pair of left and right wheels. The sun gear may be connected to the motor and power may be input to the planetary gear mechanism from the motor. The power may be input to the parallel gear from the carrier. The first bearing may be disposed on one side relative to the carrier and the parallel gear and the second bearing may be disposed on other side of the carrier and the parallel gear.
F16H 57/037 - Boîtes de vitesses pour l'adaptation des transmissions différentielles
B60K 1/00 - Agencement ou montage des ensembles de propulsion électriques
B60K 17/16 - Agencement ou montage des transmissions sur les véhicules caractérisées par la disposition, l'emplacement ou le type de mécanisme de transmission du différentiel
B60L 15/00 - Procédés, circuits ou dispositifs pour commander la propulsion des véhicules à traction électrique, p.ex. commande de la vitesse des moteurs de traction en vue de réaliser des performances désirées; Adaptation sur les véhicules à traction électrique de l'installation de commande à distance à partir d'un endroit fixe, de différents endroits du véhicule ou de différents véhicules d'un même train
F16H 37/08 - Combinaisons de transmissions mécaniques non prévues dans les groupes comportant essentiellement et uniquement des transmissions à engrenages ou à friction avec dispositions pour répartir le couple entre plusieurs arbres intermédiaires avec transmission différentielle
A delivery support apparatus according to the present disclosure includes a controller configured to acquire information about a vehicle used for delivery of a package, the information having been acquired on the vehicle, determine, based on the information about the vehicle, a loading/unloading location at which the package was loaded or unloaded, and generate, based on the loading/unloading location, information about a location at which packages can be loaded/unloaded.
A recycling support system for a production facility performing a plurality of types of recycling processing using marine plants includes a measurement unit configured to measure an amount of remaining energy used to operate the production facility, and a control unit configured to control a proportion of each of the plurality of types of recycling processing carried out in the production facility according to the amount of remaining energy used to operate the production facility measured by the measurement unit.
A mobile terminal includes: one or more memories; and one or more processors configured to receive, from a vehicle, pre-update software of a single-bank computer mounted on the vehicle; and transmit, to the vehicle, update software acquired from a server after the received pre-update software is stored in the one or more memories.
A method for controlling a mobile shop includes: determining a selling situation of a plurality of items using information about an inventory status of the plurality of items and information about a well-selling time of the plurality of items; setting a charging schedule for a battery (secondary battery) based on the selling situation; and causing the mobile shop to move to EVSE (charging facility) according to the charging schedule.
G05D 1/02 - Commande de la position ou du cap par référence à un système à deux dimensions
B60L 58/12 - Procédés ou agencements de circuits pour surveiller ou commander des batteries ou des piles à combustible, spécialement adaptés pour des véhicules électriques pour la surveillance et la commande des batteries en fonction de l'état de charge [SoC]
A power storage system performing charging and discharging with an external system includes first and second battery units connected in parallel and each including a plurality of battery packs connected in parallel to a power converter. The power storage system includes a controller controlling operation of each power converter. The first and second battery units include a first battery pack and a second battery pack higher in internal resistance than the first battery pack, as the plurality of battery packs. The controller selects two second battery packs from a plurality of second battery packs included in the power storage system. In a standby state where charging and discharging are not performed with the external system, the controller performs, at different timings, control to discharge one of the selected two second battery packs and thereby charge the other, and control to discharge the other and thereby charge the one.
The power converter includes a first connection unit to which a DC power source is connected, a second connection unit to which an AC power source or a power consuming device is connected, a conversion unit that performs power conversion between the first connection unit and the second connection unit, and a control unit that controls an operation of the conversion unit. The control unit performs both AC control for controlling the operation of the conversion unit so that the input or output of AC power is performed in the second connection unit, and DC control for controlling the operation of the conversion unit so that the output of DC power is performed in the second connection unit.
H02M 7/217 - Transformation d'une puissance d'entrée en courant alternatif en une puissance de sortie en courant continu sans possibilité de réversibilité par convertisseurs statiques utilisant des tubes à décharge avec électrode de commande ou des dispositifs à semi-conducteurs avec électrode de commande utilisant des dispositifs du type triode ou transistor exigeant l'application continue d'un signal de commande utilisant uniquement des dispositifs à semi-conducteurs
H02M 1/00 - APPAREILS POUR LA TRANSFORMATION DE COURANT ALTERNATIF EN COURANT ALTERNATIF, DE COURANT ALTERNATIF EN COURANT CONTINU OU VICE VERSA OU DE COURANT CONTINU EN COURANT CONTINU ET EMPLOYÉS AVEC LES RÉSEAUX DE DISTRIBUTION D'ÉNERGIE OU DES SYSTÈMES D'ALI; TRANSFORMATION D'UNE PUISSANCE D'ENTRÉE EN COURANT CONTINU OU COURANT ALTERNATIF EN UNE PUISSANCE DE SORTIE DE CHOC; LEUR COMMANDE OU RÉGULATION - Détails d'appareils pour transformation
A proposal device is provided, the proposal device including: a memory; and a processor coupled to the memory, the processor being configured to: acquire, from a vehicle, status information related to a state of the vehicle and a state of an onboard device, perform diagnosis of a trend in operation of the onboard device by a driver of the vehicle, based on the acquired status information, and propose, to the driver, introduction of an application that provides notification of a forgotten operation, in a case in which results of the diagnosis indicate a tendency by the driver to forget to operate the onboard device.
G07C 5/08 - Enregistrement ou indication de données de marche autres que le temps de circulation, de fonctionnement, d'arrêt ou d'attente, avec ou sans enregistrement des temps de circulation, de fonctionnement, d'arrêt ou d'attente
A driving assistance system includes: a first control unit configured to output an output amount related to a required amount; and a second control unit configured to calculate a difference amount between the output amount output and an actually measured amount of an actuator, and control the actuator based on the difference amount and a torque map, in which in assist control (second driving assistance control), the first control unit calculates a difference amount between a second required amount and the actually measured amount, acquires a division amount by dividing the difference amount by a predetermined value, and outputs a total amount of the division amount and the actually measured amount as the output amount, and the second control unit calculates a difference amount between the total amount and the actually measured amount, and controls the actuator based on the difference amount and a second torque map.
Toyota Motor Engineering & Manufacturing North America, Inc. (USA)
Toyota Jidosha Kabushiki Kaisha (Japon)
Inventeur(s)
Mohtadi, Rana
Tutusaus, Oscar
Abrégé
An electrolyte includes a composite salt mixture with a halogenated boron cluster salt. The halogenated boron cluster salt includes a cation selected from Li+, Na+, Mg2+, Ca2+, Zn2+ and Al3+, and a halogenated boron cluster anion. The halogenated boron cluster anion has a structure of [CB(y−1)H(y−z−i)RzXi]−, [C2B(y−2)H(y−t−j−1)RtXj]−, [C2B(y−3)H(y−t−j)RtXj]−, [C2B(y−3)H(y−t−j−1)RtXj]2−, or [C2B(y−4)H(y−t−j−1)RtXj]2−, [CB(y−1)H(y−z)Rz]−, [C2B(y−2)H(y−t−1)Rt]−, [C2B(y−3)H(y−t)Rt]−, [C2B(y−3)H(y−t−1)Rt]2−, and/or ByH(y−z−i)RzXi]2−, where y is an integer within a range of 6 to 12, (z+i) is an integer within a range of 0 to y, (t+j) is an integer within a range of 0 to (y−1), and X is F, Cl, Br, or I. Also, the composite salt mixture can be at least 90 mol % halogenated, for example, at least 90 mol % mono-halogenated or less than 10 mol % mono-halogenated.
A communication apparatus comprises a transmitter configured to transmit a scheduling request (SR), and a controller configured to control a state related to monitoring of a physical downlink control channel (PDCCH) based on the transmission of the SR or a trigger of the SR.
A method for multi-view dataset formation from fleet data is described. The method includes detecting at least a pair of vehicles within a vicinity of one another, and having overlapping viewing frustums of a scene. The method also includes triggering a capture of sensor data from the pair of vehicles. The method further includes synchronizing the sensor data captured by the pair of vehicles. The method also includes registering the sensor data captured by the pair of vehicles within a shared coordinate system to form a multi-view dataset of the scene.
G06V 10/774 - Dispositions pour la reconnaissance ou la compréhension d’images ou de vidéos utilisant la reconnaissance de formes ou l’apprentissage automatique utilisant l’intégration et la réduction de données, p.ex. analyse en composantes principales [PCA] ou analyse en composantes indépendantes [ ICA] ou cartes auto-organisatrices [SOM]; Séparation aveugle de source méthodes de Bootstrap, p.ex. "bagging” ou “boosting”
G06V 20/58 - Reconnaissance d’objets en mouvement ou d’obstacles, p.ex. véhicules ou piétons; Reconnaissance des objets de la circulation, p.ex. signalisation routière, feux de signalisation ou routes
H04W 4/021 - Services concernant des domaines particuliers, p.ex. services de points d’intérêt, services sur place ou géorepères
H04W 4/46 - Services spécialement adaptés à des environnements, à des situations ou à des fins spécifiques pour les véhicules, p.ex. communication véhicule-piétons pour la communication de véhicule à véhicule
34.
PRODUCTION DEVICE OF ELECTRODE MEMBER AND PRODUCTION METHOD OF ELECTRODE MEMBER
A production device of an electrode member to be used for a battery, the production device including: a backup roll configured to support a current collector to be carried; a first die configured to form a first coating layer by coating the current collector on the backup roll with a first slurry; and a second die configured to form a second coating layer by coating the first coating layer on the backup roll with a second slurry, wherein each of the first die and the second die are independent; and when horizontal direction is regarded as a reference 0°, perpendicular downward is regarded as +90°, and perpendicular upward is regarded as −90°, a discharge angle of the second slurry in the second die is −90° or more and +60° or less.
A processing device for time-series data for reducing a data amount of time-series data, comprising: a compression processing unit that performs predetermined compression processing on original data of quantized time-series data, reduces the data amount, and converts the data into data for storage in a form that can be stored in a storage unit, wherein the compression processing unit calculates a first statistical index related to the original data, excludes data corresponding to an exclusion condition from the original data as a missing value, performs compression processing on the original data excluding a missing value, generates compressed data in which the data amount is reduced, and stores the compressed data and the first statistical index in the storage unit as data for storage.
A vehicle includes: a battery; an electricity supply unit configured to be capable of supplying electric power from the battery to an external load; a charge port unit including a charge inlet that a charge connector is attached to and detached from, the charge connector being used for charging the battery with an external electricity source; and a control unit configured to control operation of a movable portion that is included in the charge port unit. When an external electricity supply process of supplying electric power from the electricity supply unit to the external load is executed, the control unit controls the movable portion of the charge port unit, to physically prohibit the charge connector from being connected to the charge inlet.
With reference to a message table associating a plurality of messages to be notified to a driver of a vehicle with a first condition, a second condition, last notification time of the message, and renotification requirement, a notification device selects messages associated with an identified first condition corresponding to a situation of surroundings of a vehicle or a state of a driver, selects, from among the messages associated with the identified first condition, messages associated with an identified second condition corresponding to a state of the driver, specifies, from among the messages associated with the identified second condition, a message without a record of last notification time or a message with a record of last notification time and with a renotification requirement requiring a renotification, and notifies the specified message to the driver through an output device.
B60W 50/14 - Moyens d'information du conducteur, pour l'avertir ou provoquer son intervention
B60W 40/08 - Calcul ou estimation des paramètres de fonctionnement pour les systèmes d'aide à la conduite de véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier liés aux conducteurs ou aux passagers
38.
METHOD FOR INSPECTING A POWER STORAGE DEVICE FOR SHORT CIRCUIT, METHOD FOR MANUFACTURING THE POWER STORATE DEVICE, AND METHOD FOR MANUFACTURING A CONNECTED RESTRAINED-DEVICE MODULE
A method for inspecting a battery for short circuit includes: adjusting batteries, which have been subjected to initial charging and subsequent charging and discharging, to a first device voltage; measuring a pre-leaving voltage; leaving the batteries for a leaving period with terminals in an open state; measuring a post-leaving device voltage; actually measuring an actual measured voltage drop rate; determining whether or not each voltage is short-circuited; and, prior to the determining, estimating an estimating voltage drop rate according to an elapsed time and a leaving period. In the determining, it is determined whether or not each battery is short-circuited using the actual voltage drop rate and the estimated voltage drop rate.
H01M 10/48 - Accumulateurs combinés à des dispositions pour mesurer, tester ou indiquer l'état des éléments, p.ex. le niveau ou la densité de l'électrolyte
A travel planner identifies, for a connection point where a travel lane in which a vehicle is traveling connects ahead of the vehicle with another lane different from the travel lane, an entry time range representing a time range during which entry of the vehicle from the travel lane to the connection point is recommended, and creates a travel plan including a transition of travel speed of the vehicle from a current position of the vehicle to the connection point so as to arrive at the connection point within the entry time range.
B60W 40/08 - Calcul ou estimation des paramètres de fonctionnement pour les systèmes d'aide à la conduite de véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier liés aux conducteurs ou aux passagers
B60W 60/00 - Systèmes d’aide à la conduite spécialement adaptés aux véhicules routiers autonomes
40.
METHOD FOR MANUFACTURING NEGATIVE ELECTRODE PLATE, NEGATIVE ELECTRODE PLATE, AND RECHARGEABLE BATTERY
A method for manufacturing a negative electrode plate of a rechargeable battery is provided. The method includes kneading a negative electrode active material and a negative electrode additive to form a negative electrode mixture paste; applying the negative electrode mixture paste to a negative electrode current collector; and drying the negative electrode mixture paste. The blackness of a material prepared by kneading the negative electrode active material and the negative electrode additive is set in a range of 4 to 16. The viscosity of a negative electrode thickener contained in the negative electrode additive is set in a range of 13000 mPa·s to 21000 mPa·s when a shear rate is 0.01 s−1.
H01M 4/13 - PROCÉDÉS OU MOYENS POUR LA CONVERSION DIRECTE DE L'ÉNERGIE CHIMIQUE EN ÉNERGIE ÉLECTRIQUE, p.ex. BATTERIES Électrodes Électrodes composées d'un ou comprenant un matériau actif Électrodes pour accumulateurs à électrolyte non aqueux, p.ex. pour accumulateurs au lithium; Leurs procédés de fabrication
An example operation includes one or more of obtaining, by a server, a certificate from an IoT device associated with a vehicle, determining, by the server, the certificate is not a revoked certificate, assigning, by the server, a temporary certificate to the IoT device, and validating, by the server, the temporary certificate.
H04L 9/32 - Dispositions pour les communications secrètes ou protégées; Protocoles réseaux de sécurité comprenant des moyens pour vérifier l'identité ou l'autorisation d'un utilisateur du système
A negative electrode active material layer and a solid-state battery, which can exhibit the inherent performance of porous silicon particles, are provided. The negative electrode active material layer of the present disclosure contains porous silicon particles, graphite particles, and inorganic solid electrolyte particles, and the ratio of the mass of the graphite particles to the total mass of the porous silicon particles and the graphite particles is 10 mass % to 25 mass %. In addition, the solid-state battery of the present disclosure comprises the negative electrode active material layer of the present disclosure, the solid electrolyte layers, and the positive electrode active material layer in this order.
H01M 4/134 - PROCÉDÉS OU MOYENS POUR LA CONVERSION DIRECTE DE L'ÉNERGIE CHIMIQUE EN ÉNERGIE ÉLECTRIQUE, p.ex. BATTERIES Électrodes Électrodes composées d'un ou comprenant un matériau actif Électrodes pour accumulateurs à électrolyte non aqueux, p.ex. pour accumulateurs au lithium; Leurs procédés de fabrication Électrodes à base de métaux, de Si ou d'alliages
H01M 4/133 - PROCÉDÉS OU MOYENS POUR LA CONVERSION DIRECTE DE L'ÉNERGIE CHIMIQUE EN ÉNERGIE ÉLECTRIQUE, p.ex. BATTERIES Électrodes Électrodes composées d'un ou comprenant un matériau actif Électrodes pour accumulateurs à électrolyte non aqueux, p.ex. pour accumulateurs au lithium; Leurs procédés de fabrication Électrodes à base de matériau carboné, p.ex. composés d'intercalation du graphite ou CFx
H01M 4/1393 - Procédés de fabrication d’électrodes à base de matériau carboné, p.ex. composés au graphite d'intercalation ou CFx
H01M 4/1395 - Procédés de fabrication d’électrodes à base de métaux, de Si ou d'alliages
H01M 4/38 - Emploi de substances spécifiées comme matériaux actifs, masses actives, liquides actifs d'éléments simples ou d'alliages
H01M 4/587 - Matériau carboné, p.ex. composés au graphite d'intercalation ou CFx pour insérer ou intercaler des métaux légers
H01M 4/62 - Emploi de substances spécifiées inactives comme ingrédients pour les masses actives, p.ex. liants, charges
H01M 10/0525 - Batteries du type "rocking chair" ou "fauteuil à bascule", p.ex. batteries à insertion ou intercalation de lithium dans les deux électrodes; Batteries à l'ion lithium
Toyota Motor Engineering & Manufacturing North America, Inc. (USA)
Toyota Jidosha Kabushiki Kaisha (Japon)
University of Newcastle Upon Tyne (Royaume‑Uni)
Inventeur(s)
Hoxha, Bardh
Yamaguchi, Tomoya
Hekal, Abdelrahman
Bogomolov, Sergiy
Abrégé
System, methods, and other embodiments described herein relate to estimating reachable states for a vehicle using a neural model. In one embodiment, a method includes generating an unverified command by a first controller and a safety command by a second controller for a projected path by an automated driving system (ADS) associated with a vehicle. The method also includes estimating reachable states by a neural network (NN) model that uses the unverified command and an initial condition for the vehicle, the reachable states representing positions and orientations for the vehicle within a bounded time and a state space associated with the initial condition and the projected path. The method also includes, upon determining that the reachable states satisfy collision criteria, executing by the vehicle a maneuver with the safety command for the projected path and generating subsequent commands using vehicle data from the first controller and the second controller.
B60W 60/00 - Systèmes d’aide à la conduite spécialement adaptés aux véhicules routiers autonomes
B60W 50/00 - COMMANDE CONJUGUÉE DE PLUSIEURS SOUS-ENSEMBLES D'UN VÉHICULE, DE FONCTION OU DE TYPE DIFFÉRENTS; SYSTÈMES DE COMMANDE SPÉCIALEMENT ADAPTÉS AUX VÉHICULES HYBRIDES; SYSTÈMES D'AIDE À LA CONDUITE DE VÉHICULES ROUTIERS, NON LIÉS À LA COMMANDE D'UN SOUS-ENSEMBLE PARTICULIER - Détails des systèmes d'aide à la conduite des véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier
A method of self-discharge test for a battery including an electrode body provided with a positive electrode plate including a positive active material layer and a negative electrode plate including a negative active material layer. The method includes a process of voltage adjusting to adjust a battery voltage to a first battery voltage and a process of self-discharge testing to keep the battery in a terminal open state for a predetermined term and to inspect a state of self-discharge of the battery from variations in the battery voltage occurred during the predetermined term. The voltage adjusting is to adjust the battery voltage to the first battery voltage having magnitude, for which a variation settled time of settling a variation amount of the battery voltage varied by Li diffusion to lessen a concentration gap of an opposing-portion concentration and a non-opposing portion concentration, is set as 17 hours or less.
G01R 31/3835 - Dispositions pour la surveillance de variables des batteries ou des accumulateurs, p.ex. état de charge ne faisant intervenir que des mesures de tension
H01M 10/48 - Accumulateurs combinés à des dispositions pour mesurer, tester ou indiquer l'état des éléments, p.ex. le niveau ou la densité de l'électrolyte
Toyota Motor Engineering & Manufacturing North America, Inc. (USA)
Toyota Jidosha Kabushiki Kaisha (Japon)
Georgia Tech Research Corporation (USA)
Inventeur(s)
Song, Yuyang
Tanaka, Masato
Yue, Liang
Qi, Hang
Abrégé
A resin for adhesive bonding to fabrics includes between about 80 wt. % and about 90 wt. % of a monomer, between about 10 wt. % and about 20 wt. % of a cross-linking agent with two or more acrylic acid groups separated by a flexible linker, between about 0.5 wt. % and about 1.5 wt. % of a photoinitiator, and between about 10 wt. % and about 15 wt. % of a thickening agent. The monomer as a melting point less than 25° C. and the flexible linker has subunits such as methylene glycol, ethylene glycol, propylene glycol, butylene glycol, and combinations thereof. Also, the resin forms a bond with polyurethane coated nylon fabric and the bond exhibits an adhesion strength greater than a tensile strength of the polyurethane coated nylon fabric.
A method for inspecting a battery in which an electrode body is accommodated in a case so that the electrode body is insulated from the case by an insulation film includes: adjusting the battery to a first voltage; measuring a first potential difference which is a potential difference between the case and a negative terminal that is exposed outside the case and electrically connected to a negative electrode plate to have a negative-electrode potential; measuring a second potential difference which is a potential difference between the case and the negative electrode plate after a lapse of a standby period of 24 hours or more; and determining whether or not a short circuit exists between the case and the negative electrode plate based on magnitude of the first and second potential differences and a change between the first potential difference and the second potential difference.
G01R 31/52 - Test pour déceler la présence de courts-circuits, de fuites de courant ou de défauts à la terre
G01R 31/3835 - Dispositions pour la surveillance de variables des batteries ou des accumulateurs, p.ex. état de charge ne faisant intervenir que des mesures de tension
The power processing system includes a communication device and a processing device. The communication device is configured to communicate with both the facility and the management device. The processing device determines first power consumption, which is power consumption consumed in the facility during the aggregation period, among the power generation amounts of the renewable energy generated by the renewable energy power generation device during the predetermined aggregation period, and determines second power consumption, which is power consumption consumed in the facility, using normal power different from the renewable energy power. When the communication device receives the allocation request, the processing device executes the certificate issuance process.
A power storage system includes: a power conversion device to which power is supplied from an external system; and a controller that controls an operation of the power conversion device. First and second battery packs different from each other in type are connected to the power conversion device in parallel. The controller stores a first charge profile for the first battery pack and a second charge profile for the second battery pack. The controller charges the first battery pack by operating the power conversion device based on the first charge profile. The controller charges the second battery pack by operating the power conversion device based on the second charge profile.
H02J 7/00 - Circuits pour la charge ou la dépolarisation des batteries ou pour alimenter des charges par des batteries
G06F 1/26 - Alimentation en énergie électrique, p.ex. régulation à cet effet
H01M 10/0525 - Batteries du type "rocking chair" ou "fauteuil à bascule", p.ex. batteries à insertion ou intercalation de lithium dans les deux électrodes; Batteries à l'ion lithium
H01M 10/46 - Accumulateurs combinés par structure avec un appareil de charge
When a PCU (inverter) of an electrically powered vehicle fails, a first map where a temperature and a current of a battery are defined as parameters or a second map where a temperature and a rate of change in voltage of the battery are defined as parameters is used to determine whether or not rapid deterioration of the battery has occurred. When it is determined that the rapid deterioration of the battery has occurred, a battery replacement indicator is turned on.
G01R 31/392 - Détermination du vieillissement ou de la dégradation de la batterie, p.ex. état de santé
B60L 58/16 - Procédés ou agencements de circuits pour surveiller ou commander des batteries ou des piles à combustible, spécialement adaptés pour des véhicules électriques pour la surveillance et la commande des batteries en fonction du vieillissement de la batterie, p.ex. du nombre de cycles de charge ou de l'état de santé [SoH]
G01R 31/367 - Logiciels à cet effet, p.ex. pour le test des batteries en utilisant une modélisation ou des tables de correspondance
G01R 31/396 - Acquisition ou traitement de données pour le test ou la surveillance d’éléments particuliers ou de groupes particuliers d’éléments dans une batterie
50.
SYSTEMS AND METHODS FOR FEDERATED LEARNING WITH HETEROGENEOUS CLIENTS VIA DATA-FREE KNOWLEDGE DISTILLATION
Toyota Motor Engineering & Manufacturing North America, Inc. (USA)
Toyota Jidosha Kabushiki Kaisha (Japon)
Inventeur(s)
Wang, Chianing
Chen, Huancheng
Abrégé
A system for training a model using federated learning is provided. The system includes a server, and a plurality of vehicles. Each of the vehicles includes a controller programmed to: transmit first knowledge data including information about a plurality of feature vectors and information about a plurality of predictions, receive first aggregated knowledge from the server, and train a local model based on the first aggregated knowledge. The server averages the first knowledge data received from the plurality of vehicles to generate the aggregated knowledge.
An all-solid-state battery includes an electrode layer. The electrode layer includes an active material and a sulfide solid electrolyte. In the electrode layer, the sulfide solid electrolyte satisfies a relationship represented by the following formula (1): “C1/(C1+C2+C3)>0.5”. C1, C2, and C3 each represent an abundance ratio of a skeleton structure unit included in the sulfide solid electrolyte. C1 represents an abundance ratio of a PS43− unit. C2 represents an abundance ratio of a P2Sx unit. C3 represents an abundance ratio of a POx unit.
A vehicle controller includes: an execution unit configured to execute a control program for controlling a vehicle; a storage unit having a first program storage area to store the control program and a second program storage area to store an update program that is an updated version of the control program and created based on update data acquired from a device located outside the vehicle through a network; and an update unit that stores the update program in the second program storage area based on the update data, regardless of whether the execution unit is executing the control program.
B60R 16/023 - Circuits électriques ou circuits de fluides spécialement adaptés aux véhicules et non prévus ailleurs; Agencement des éléments des circuits électriques ou des circuits de fluides spécialement adapté aux véhicules et non prévu ailleurs électriques pour la transmission de signaux entre des parties ou des sous-systèmes du véhicule
H04L 67/00 - Dispositions ou protocoles de réseau pour la prise en charge de services ou d'applications réseau
H04W 4/40 - Services spécialement adaptés à des environnements, à des situations ou à des fins spécifiques pour les véhicules, p.ex. communication véhicule-piétons
53.
COMMUNICATION SYSTEM, CONTROL APPARATUS, AND COMMUNICATION METHOD
A communication system includes a first communication station, a second communication station, a relay station to relay a communication between the first communication station and the second communication station without changing a timeslot of the communication based on Time Division Multiplexing and a control apparatus. The control apparatus permits the relay station to perform a further communication in response to a communication request occurring in the relay station while relaying the communication, the further communication being directed to a third communication station when the communication to be relayed fulfill a first condition and when the further communication in response to the communication request fulfill a second condition.
A fusion sheet includes: a base material layer including a first surface and a second surface; a fusion base part partially stacked to the first surface of the base material layer and fusible to a wire-like transmission member; and an adhesive base part partially stacked to the second surface of the base material layer and having larger adhesive strength with an adhesive member than the base material layer. A first section and a second section are provided along an extension direction of the base material layer. The first section is a section where the adhesive base part is stacked to the base material layer other than a laminated section where the adhesive base part is stacked. The second section is a section where the adhesive base part is stacked to the base material layer other than a laminated section where the fusion base part is stacked.
A wire harness is arranged between a vehicle body and a sliding door in a vehicle, in which: a protector is mounted on a bent region of the wire harness having a shape in which a middle of the wire harness in a longitudinal direction is bent in a crank shape; the protector includes a groove having a shape corresponding to the bent shape of the wire harness and has a larger width than a radial size of the wire harness; a bottom surface of the groove has a hole into which a pin is detachably inserted, the pin constraining the wire harness in a state where the wire harness has looseness so as not to contact an inner angle portion at a bent site of the groove; and one side of the bent region of the wire harness is fixed to the protector using a fastening member.
B60R 16/02 - Circuits électriques ou circuits de fluides spécialement adaptés aux véhicules et non prévus ailleurs; Agencement des éléments des circuits électriques ou des circuits de fluides spécialement adapté aux véhicules et non prévu ailleurs électriques
H02G 11/00 - Installations de câbles ou de lignes électriques entre deux pièces en mouvement relatif
56.
MANAGEMENT SYSTEM, MANAGEMENT DEVICE, AND POWER BALANCING METHOD
A management system includes a plurality of resources configured to be electrically connected to an external power supply, and a management device configured to manage the resources. The management device includes a planning unit and a management unit. The planning unit is configured to determine a power balancing plan of each of the resources by using first information on a use schedule of each of the resources and second information indicating a magnitude of an environmental load in a process of generating electric power to be supplied by the external power supply. The management unit is configured to manage the resources to cause each of the resources to operate according to the power balancing plan or a modified power balancing plan in power balancing of the external power supply.
A vehicle may include a battery pack located below the floor panel; an energy absorber extending along a side surface of the battery pack in the front-rear direction and facing the side sill from below; and a cover plate covering a lower surface of the battery pack from below. The energy absorber may include an inner part facing the side surface of the battery pack and an outer part located outside in a left-right direction of the vehicle with respect to the inner part. An end of the cover plate in the left-right direction may be fixed to a lower surface of the inner part of the energy absorber with a plurality of fasteners. A lower surface of the outer part may protrude downward relative to the lower surface of the inner part and is located lower than lower ends of the plurality of fasteners.
B62D 21/15 - Châssis, c. à d. armature sur laquelle une carrosserie peut être montée comportant des moyens amortisseurs de chocs, p.ex. châssis conçus pour changer de forme ou de dimensions d'une façon définitive ou temporaire à la suite d'une collision avec un autre corps
A server performs a process, including: if there is a code authentication request (YES in S200), a step of performing a code authentication process (S202) and a step of transmitting a result of authentication (S204); and if battery information is received (YES in S206), a step of storing the battery information (S208), a step of calculating a degradation estimate (S210), a step of setting degradation information in accordance with a code (S212), and a step of transmitting the degradation information (S214).
To suppress unnecessary operation of PCS control, provided is a vehicle control device comprising a detection unit for detecting an object located in diagonally forward of an own vehicle as a diagonally forward object; and an ECU including at least one processor. The ECU programmed to execute a collision avoidance control for avoiding a collision between own vehicle and one moving object detected as the diagonally forward object by the detection unit or reducing damage to the collision when the one moving object detected as the diagonally forward object satisfies a predetermined collision condition. The ECU programmed to suppress the collision avoidance control based on the one moving object when the other moving object or a stationary object is detected within a predetermined area in the vicinity of the one moving object by the detecting unit.
B60W 30/09 - Entreprenant une action automatiquement pour éviter la collision, p.ex. en freinant ou tournant
B60W 40/02 - Calcul ou estimation des paramètres de fonctionnement pour les systèmes d'aide à la conduite de véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier liés aux conditions ambiantes
A non-aqueous rechargeable battery includes an electrode body in which a positive plate and a negative electrode plate are stacked in a stacking direction with a separator arranged in between. The positive electrode plate includes a positive electrode substrate, and a positive electrode mixture layer and an insulating layer arranged on each of two opposite surfaces of the positive electrode substrate. The positive electrode substrate includes a positive electrode uncoated portion. The electrode body includes a positive electrode current collector portion in which layers of the positive electrode uncoated portion are stacked in the stacking direction. A first insulating layer on a first surface of the positive electrode substrate, facing a center of the positive electrode current collector portion in the stacking direction, has a thickness that is greater than that of a second insulating layer on a second surface of the positive electrode substrate opposite to the first surface.
H01M 10/0585 - Structure ou fabrication d'accumulateurs ayant uniquement des éléments de structure plats, c. à d. des électrodes positives plates, des électrodes négatives plates et des séparateurs plats
H01M 10/0525 - Batteries du type "rocking chair" ou "fauteuil à bascule", p.ex. batteries à insertion ou intercalation de lithium dans les deux électrodes; Batteries à l'ion lithium
61.
SYSTEMS AND METHODS FOR CONTROLLING A TRAILER VEHICLE
Toyota Motor Engineering & Manufacturing North America, Inc. (USA)
Toyota Jidosha Kabushiki Kaisha (Japon)
Inventeur(s)
Williams, Paxton S.
Abrégé
Systems, methods, and other embodiments described herein relate to controlling an untethered trailer vehicle. In one embodiment, a method includes receiving sensor data about at least one vehicle between a tow vehicle and at least one trailer vehicle and outputting, using an output system, information related to the at least one vehicle and the at least one trailer vehicle based on the sensor data. The method includes receiving from a user, using an input system, a new position for at least one trailer vehicle relative to the at least one vehicle and transmitting the new position to the at least one trailer vehicle.
G05D 1/00 - Commande de la position, du cap, de l'altitude ou de l'attitude des véhicules terrestres, aquatiques, aériens ou spatiaux, p.ex. pilote automatique
A motion prediction device detecting, from surrounding data representing a situation in a predetermined range of surroundings of a vehicle, a traffic participant existing in the predetermined range, determining whether there is a blind area not represented in the surrounding data in the predetermined range, when it is determined that there is a blind area presuming that there is a virtual traffic participant in the blind area, and predicting motion of the traffic participant caused by the presence of the virtual traffic participant.
B60W 60/00 - Systèmes d’aide à la conduite spécialement adaptés aux véhicules routiers autonomes
B60W 50/00 - COMMANDE CONJUGUÉE DE PLUSIEURS SOUS-ENSEMBLES D'UN VÉHICULE, DE FONCTION OU DE TYPE DIFFÉRENTS; SYSTÈMES DE COMMANDE SPÉCIALEMENT ADAPTÉS AUX VÉHICULES HYBRIDES; SYSTÈMES D'AIDE À LA CONDUITE DE VÉHICULES ROUTIERS, NON LIÉS À LA COMMANDE D'UN SOUS-ENSEMBLE PARTICULIER - Détails des systèmes d'aide à la conduite des véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier
A water electrolysis system including: a water electrolysis cell; a water supply device that supplies water to an oxygen electrode of the water electrolysis cell; a water supply channel that connects the water electrolysis cell and the water supply device and through which the water supplied from the water supply device to the oxygen electrode flows; a gas-liquid separator that separates the water and a gaseous component discharged from the oxygen electrode; a water discharge channel that connects the water electrolysis cell and the gas-liquid separator and through which the water and a gaseous component discharged from the oxygen electrode flow; and a recombiner disposed between the water electrolysis cell and the gas-liquid separator in the water discharge channel. The recombiner includes a recombination catalyst that reacts hydrogen and oxygen, and the water electrolysis cell and the recombiner are electrically insulated from each other.
The battery management system includes a plurality of battery units connected in parallel to each other, and a control device that executes temperature control for each battery of the plurality of battery units. The plurality of battery units includes a first battery unit having a LFP cell and a second battery unit having a ternary battery. When the temperature of the battery management system 1 is equal to or lower than the reference temperature, the control device executes the first temperature control so that the temperature of LFP cell is higher than the temperature of the ternary cell.
H01M 10/0525 - Batteries du type "rocking chair" ou "fauteuil à bascule", p.ex. batteries à insertion ou intercalation de lithium dans les deux électrodes; Batteries à l'ion lithium
H01M 10/48 - Accumulateurs combinés à des dispositions pour mesurer, tester ou indiquer l'état des éléments, p.ex. le niveau ou la densité de l'électrolyte
A remote assistance system according to the present disclosure comprises a memory storing a database and one or more processors. The database manages, for each of a plurality of operators, feature values of a plurality of feature items regarding a last assistance scene. The one or more processors are configured to execute the following first to third processes. The first process is, when a new assistance request is received from s vehicle, specifying one or more index items from the plurality of feature items. The second process is specifying, from the plurality of operators, one or more candidate operators whose the last assistance scene is similar to a current assistance scene based on the feature values of the one or more index items. The third process is selecting an operator to process the new assistance request from the one or more candidate operators.
G05D 1/00 - Commande de la position, du cap, de l'altitude ou de l'attitude des véhicules terrestres, aquatiques, aériens ou spatiaux, p.ex. pilote automatique
G06V 10/74 - Appariement de motifs d’image ou de vidéo; Mesures de proximité dans les espaces de caractéristiques
G06V 20/56 - Contexte ou environnement de l’image à l’extérieur d’un véhicule à partir de capteurs embarqués
66.
INFORMATION PROCESSING APPARATUS AND INFORMATION PROCESSING METHOD
An information processing apparatus to be mounted on a first vehicle, the information processing apparatus comprises a controller configured to: determine whether there is a record of consent, expressed in the past, from a driver of the first vehicle for acquisition, by an external apparatus, of first data acquired by the first vehicle during traveling, and issue an inquiry to the driver, in a case where there does not exist the record of the driver giving the consent for acquisition of the first data by the external apparatus, as to whether the driver gives the consent for acquisition of the first data by the external apparatus or not.
B60W 40/08 - Calcul ou estimation des paramètres de fonctionnement pour les systèmes d'aide à la conduite de véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier liés aux conducteurs ou aux passagers
B60W 50/14 - Moyens d'information du conducteur, pour l'avertir ou provoquer son intervention
A noncontact power supply apparatus includes a coil unit having a coil for transmitting electric power to a power supply target by noncontact and an electromagnetic shield for reducing a leakage magnetic field of the coil. The electromagnetic shield is the laminate body in which the metal plates are laminated. A lubricant having a predetermined viscosity is applied to a contacting surface between the metal plates.
H02J 50/70 - Circuits ou systèmes pour l'alimentation ou la distribution sans fil d'énergie électrique mettant en œuvre la réduction des champs de fuite électriques, magnétiques ou électromagnétiques
H02J 50/10 - Circuits ou systèmes pour l'alimentation ou la distribution sans fil d'énergie électrique utilisant un couplage inductif
H02J 50/40 - Circuits ou systèmes pour l'alimentation ou la distribution sans fil d'énergie électrique utilisant plusieurs dispositifs de transmission ou de réception
A communication system comprising: a first base station having a first controller and a second base station having a second controller, wherein the first controller transmits a handover request to the second base station when a handover to the second base station is required for a user terminal, the second controller transmits a handover response including congestion state information at the second base station to the first base station in response to receiving the handover request, and the first controller transmits a handover command including the congestion state information or a data transmission control command according to the congestion state information to the user terminal in response to receiving the handover response.
A tank includes a liner and a reinforcement layer. The liner has a body portion with a cylindrical shape, and a pair of dome-shaped portions respectively provided at both ends of the body portion in an axial direction of the body portion. The reinforcement layer covers the liner and is made of a fiber reinforced resin that is a resin-impregnated fiber bundle. The reinforcement layer includes a part reinforcement layer disposed from an apex side of each of the dome-shaped portions across a boundary between the dome-shaped portion and the body portion to part of the body portion, and an outer hoop layer disposed outside the part reinforcement layer and provided so as to press an end, adjacent to the body portion, of the part reinforcement layer.
Provided is a battery module that enables a large current to be taken out thereof, that can suppress permeation of gas and moisture with a simple structure, and that can be easily produced. The battery module includes: an electricity storage module; and a housing, wherein the housing has a pair of sheet-shaped structures, the sheet-shaped structures each include a metal sheet that is disposed over an end face of the electricity storage module in the thickness direction, and a laminated sheet that is disposed so as to surround the periphery of the metal sheet, the metal sheet is electrically connected to the electricity storage module, an inner side surface of the laminated sheet is joined to a side surface of the metal sheet, and in a pair of the sheet-shaped structures, outer circumferential parts of the laminated sheets are directly or indirectly joined to each other.
H01M 10/0585 - Structure ou fabrication d'accumulateurs ayant uniquement des éléments de structure plats, c. à d. des électrodes positives plates, des électrodes négatives plates et des séparateurs plats
H01M 50/103 - Boîtiers, fourreaux ou enveloppes primaires d’une seule cellule ou d’une seule batterie caractérisés par leur forme ou leur structure physique prismatique ou rectangulaire
H01M 50/124 - Boîtiers, fourreaux ou enveloppes primaires d’une seule cellule ou d’une seule batterie caractérisés par le matériau ayant une structure en couches
The control unit generates a 3D view in which the vehicle and its surroundings are viewed from the set viewpoint from the captured images acquired from the imaging unit that captures an image of the surroundings of the vehicle and the polygon model indicating the vehicle, and displays the generated 3D view on the display. Here, when the obstacle detecting unit detects the obstacle 52 existing in the traveling direction of the vehicle, the viewpoint of 3D view displayed on the display can be switched to the viewpoint where the traveling direction of the vehicle 50 can be confirmed and the obstacle 52 is displayed on the display.
B60R 1/23 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision prédéterminé
G06V 20/58 - Reconnaissance d’objets en mouvement ou d’obstacles, p.ex. véhicules ou piétons; Reconnaissance des objets de la circulation, p.ex. signalisation routière, feux de signalisation ou routes
H04N 5/268 - Distribution ou commutation du signal
A flat wire distortion removal apparatus capable of contributing to preventing flat wires from being defectively processed is provided. A flat wire distortion removal apparatus according to an aspect of the present disclosure is a flat wire distortion removal apparatus, including a roller leveler configured to obtain parallelism between two side surfaces of the flat wire in a width direction by making the flat wire pass between a pair of rollers. The roller leveler includes a holding part configured to prevent the flat wire from rotating around an axis extending in a length direction of the flat wire.
Toyota Motor Engineering & Manufacturing North America, Inc. (USA)
Toyota Jidosha Kabushiki Kaisha (Japon)
Inventeur(s)
Rosander, Kyle E.
Khouphongsy, Phouvadol P.
Mule, Tejaswi
Stauffer, Robert J.
Pawson, Zachary T.
Brady, Louis J.
Abrégé
A test fixture for a testing a vehicle seat mounting includes a first portion and a second portion separate from the first portion and having a fulcrum supported thereon. An energy absorbing member is attached to the test fixture first portion and extends around a portion of the fulcrum. The energy absorbing member is formed so as to have a first shape when the test fixture first portion and second portion are spaced apart less than a predetermined distance. The test fixture is structured so that movement of the second portion in a direction away from the first portion causes the fulcrum to slide along the energy absorbing member. Sliding of the fulcrum along the energy absorbing member plastically deforms the energy absorbing member into a second shape different from the first shape.
TOYOTA MOTOR ENGINEERING & MANUFACTURING NORTH AMERICA, INC. (USA)
TOYOTA JIDOSHA KABUSHIKI KAISHA (Japon)
Inventeur(s)
Ucar, Seyhan
Higuchi, Takamasa
Altintas, Onur
Oguchi, Kentaro
Abrégé
Systems and methods are provided for forming remote vehicular micro clouds at one or more remote locations. According to some embodiments, the methods and systems comprise responsive to receiving a request to form a vehicular micro cloud from a client device, communicating with a plurality of vehicles within an area of a geographic location to collectively form a vehicular micro cloud at the geographic location, where client device is remote from the area of the geographic location. The methods and systems further include receiving resource data from the plurality of vehicles, the resource data comprising detection results of an environment surrounding the geographic location based on sensor sets of the plurality of vehicles, and transmitting the resource data to the client device.
The battery includes a negative electrode composite material, a separator layer, a positive electrode composite material, a conductive layer, and a positive electrode current collector. A honeycomb structure of the negative electrode includes a first end surface, a second end surface, and a side wall. The side wall connects the first end surface and the second end surface. A plurality of through holes extending from the first end surface to the second end surface is formed. The separator layer covers at least a part of the inner wall of the through hole, and separates the positive electrode composite material from the negative electrode composite material. The positive electrode composite material is disposed inside the through hole. The conductive layer including a conductive material has a composition different from that of the positive electrode composite material, and connects the positive electrode composite material and the positive electrode current collector.
A point cloud data is connected with a related data. Multiple sets of point cloud data are prepared. Each point cloud data includes information of a point cloud connected to three-dimensional position information, and each point cloud data is connected to acquisition time. At least one group is generated by classifying the point cloud, and the group is assigned to a position label and a moving body label. A moving route of the group with a moving body on-flag is predicted based on the position label of the group. The group is replaced with a position at acquisition time of the related data according to the moving route, and the acquisition time of the related data is connected to the group.
A method performed by a terminal apparatus configured to communicate with a server, the method includes displaying, on a screen, a plurality of objects including first objects indicating faces of other users who are interlocutors of a user of the terminal apparatus, detecting an object on the screen at which the user is gazing, as the user's gaze object, transmitting information indicating the user's gaze object to the server, receiving information indicating each interlocutor's gaze object from the server, and controlling orientation of each of the first objects and arrangement of the plurality of objects so as to satisfy, on the screen, a first condition that each interlocutor's line of sight is directed to the interlocutor's gaze object, and a second condition that there are no objects, in each interlocutor's the line of sight, other than the interlocutor's gaze object.
An internal combustion engine control device includes: a temperature acquisition unit configured to acquire the temperature of an internal combustion engine at the time when it is requested to start the internal combustion engine; a motoring execution unit configured to execute motoring of the internal combustion engine using the motor when it is requested to start the internal combustion engine; and an in-cylinder pressure control unit configured to control the in-cylinder pressure of the internal combustion engine during the motoring based on the temperature of the internal combustion engine. The in-cylinder pressure control unit is configured to execute in-cylinder pressure increase control, in which the in-cylinder pressure is increased when the temperature of the internal combustion engine is equal to or less than a predetermined threshold temperature compared to when the temperature of the internal combustion engine is higher than the threshold temperature, since the motoring is started.
F02D 13/02 - Réglage de la puissance du moteur par variation des caractéristiques de fonctionnement de la soupape d'admission ou de la soupape d'échappement, p.ex. réglage de la durée d'admission ou d'échappement pendant la marche du moteur
F02N 11/08 - Circuits spécialement adaptés pour le démarrage des moteurs
A lithium-ion rechargeable battery includes a negative electrode plate including a negative electrode substrate and a negative electrode mixture layer applied to the substrate, a positive electrode plate including a positive electrode substrate and a positive electrode mixture layer applied to the substrate, a separator arranged between the negative electrode plate and the positive electrode plate, and a non-aqueous electrolyte. The negative electrode substrate includes a negative electrode connection portion that projects from the negative electrode mixture layer in a first width direction. The positive electrode substrate includes a positive electrode connection portion that projects from the positive electrode mixture layer in a second width direction. The negative electrode plate has a thickness that increases in the first width direction. The positive electrode plate has a thickness that increases in the second width direction. The separator has a porosity that increases in the second width direction.
H01M 10/0587 - Structure ou fabrication d'accumulateurs ayant uniquement des éléments de structure enroulés, c. à d. des électrodes positives enroulées, des électrodes négatives enroulées et des séparateurs enroulés
H01M 4/13 - PROCÉDÉS OU MOYENS POUR LA CONVERSION DIRECTE DE L'ÉNERGIE CHIMIQUE EN ÉNERGIE ÉLECTRIQUE, p.ex. BATTERIES Électrodes Électrodes composées d'un ou comprenant un matériau actif Électrodes pour accumulateurs à électrolyte non aqueux, p.ex. pour accumulateurs au lithium; Leurs procédés de fabrication
H01M 10/0525 - Batteries du type "rocking chair" ou "fauteuil à bascule", p.ex. batteries à insertion ou intercalation de lithium dans les deux électrodes; Batteries à l'ion lithium
A vehicle control device mounted on a vehicle includes a first traveling mode being driven by the torque output from a first rotary electric machine, and a second traveling mode being driven by the engine torque output from an engine and the torque output from the first rotary electric machine, wherein a section 1 for cranking the engine by the output of the second rotary electric machine and a section 2 for assisting the driving force of the engine by the output of the first rotary electric machine are provided during a period from the first traveling mode to the engagement of the clutch at the time of starting the engine to the second traveling mode, and the torque increase of the first rotary electric machine is limited in the section 1.
B60W 20/19 - Stratégies de commande spécialement adaptées à la réalisation d’un effet particulier pour réaliser une accélération accrue
B60K 6/442 - Agencement ou montage de plusieurs moteurs primaires différents pour une propulsion réciproque ou commune, p.ex. systèmes de propulsion hybrides comportant des moteurs électriques et des moteurs à combustion interne les moteurs primaires étant constitués de moteurs électriques et de moteurs à combustion interne, p.ex. des VEH caractérisés par l'architecture du véhicule électrique hybride du type série-parallèle du type à commutation série-parallèle
B60W 10/06 - Commande conjuguée de sous-ensembles de véhicule, de fonction ou de type différents comprenant la commande des ensembles de propulsion comprenant la commande des moteurs à combustion
B60W 10/08 - Commande conjuguée de sous-ensembles de véhicule, de fonction ou de type différents comprenant la commande des ensembles de propulsion comprenant la commande des unités de traction électrique, p.ex. des moteurs ou des générateurs
B60W 10/26 - Commande conjuguée de sous-ensembles de véhicule, de fonction ou de type différents comprenant la commande des moyens de stockage d'énergie pour l'énergie électrique, p.ex. des batteries ou des condensateurs
B60W 30/182 - Sélection entre plusieurs modes opératoires, p.ex. confort ou sportif
A power transmission coil unit provided with a board having at its back surface a component mounting part to which electronic components are mounted and a coil forming part at which a coil comprised of a conductor pattern is formed, a core arranged so as to abut against a back surface of the board and formed with a hole for housing the electronic components at a position facing the electronic components, and a protective member provided at a further front surface side of the power transmission coil unit than the component mounting part of the board and receiving a load applied to the power transmission coil unit. A space is formed on a back surface side of the facing portion of the protective member positioned at the location facing the component mounting part.
A noise generation cause identifying method and a noise generation cause identifying device are provided. A response correcting process corrects a sound signal obtained through a sound signal obtaining process based on obtained model information so that a frequency response of the obtained sound signal approaches a frequency response of a learning sound signal. A variable obtaining process obtains a variable output from a map by inputting the corrected sound signal to the map. A cause identifying process identifies a generation cause of a sound picked up by a microphone using the variable obtained through the variable obtaining process.
G07C 5/08 - Enregistrement ou indication de données de marche autres que le temps de circulation, de fonctionnement, d'arrêt ou d'attente, avec ou sans enregistrement des temps de circulation, de fonctionnement, d'arrêt ou d'attente
H04R 3/04 - Circuits pour transducteurs pour corriger la fréquence de réponse
83.
SEMICONDUCTOR PARTICLES USED IN WATER DECOMPOSITION PHOTOCATALYST, PHOTOCATALYST USING THE SAME, AND METHODS OF SYNTHESIZING THEM
In a photocatalyst which is obtained by adding a co-catalyst to semiconductor particles containing strontium titanate and which causes a water decomposition reaction in which water molecules are decomposed into oxygen molecules and hydrogen molecules according to light emission, the semiconductor particles are doped with barium or additionally with scandium. A method of synthesizing a semiconductor for the photocatalyst includes a process of synthesizing semiconductor particles containing strontium titanate doped with barium by mixing barium titanate or additionally with scandium oxide into strontium chloride or mixing strontium titanate or additionally scandium oxide into strontium chloride and barium chloride and performing firing.
B01J 35/00 - Catalyseurs caractérisés par leur forme ou leurs propriétés physiques, en général
B01J 23/02 - Catalyseurs contenant des métaux, oxydes ou hydroxydes métalliques non prévus dans le groupe des métaux alcalins ou alcalino-terreux ou du béryllium
A nonaqueous electrolyte for use in a lithium-ion secondary battery, capable of reducing gas generation due to degradation of nonaqueous electrolyte, is provided. The nonaqueous electrolyte disclosed herein is for use in a lithium-ion secondary battery wherein a negative electrode active material in a negative electrode includes at least one of a Si-based negative electrode active material including Si as a component and capable of reversibly absorbing and releasing lithium ions or a graphite-based carbon negative electrode active material. The nonaqueous electrolyte contains a nonaqueous solvent and an electrolyte dissolved in the nonaqueous solvent, and further contains a cyclic carbonate and a high-molecular-weight organic compound having a weight-average molecular weight of 1000 or higher.
H01M 10/0569 - Matériaux liquides caracterisés par les solvants
H01M 10/0525 - Batteries du type "rocking chair" ou "fauteuil à bascule", p.ex. batteries à insertion ou intercalation de lithium dans les deux électrodes; Batteries à l'ion lithium
09 - Appareils et instruments scientifiques et électriques
35 - Publicité; Affaires commerciales
36 - Services financiers, assurances et affaires immobilières
42 - Services scientifiques, technologiques et industriels, recherche et conception
45 - Services juridiques; services de sécurité; services personnels pour individus
Produits et services
Computer software; computer software for databases; Construction, management, and editing of information in computer databases using blockchain technology; management of data in computer databases using blockchain technology, and provision of information related thereto; Provision of information, guidance, and advice on finance; electronic fund transfers provided via blockchain technology; electronic settlement of payments using blockchain technology-based authentication technology; settlement of payments in virtual currency using blockchain technology; User authentication using blockchain technology; issuance of electronic certificates using blockchain technology; inspection, certification, and authentication as to whether the contents of electronic information on legal documents have been falsified using blockchain technology; design, creation, or maintenance of computer programs; lending of computers; provision of programs for computers; Preparation of documents to be submitted to public offices and other documents related to proof of rights and obligations or facts; proof of the value of intellectual property rights such as copyrights and proof of the time of invention, devising, and creation etc. using blockchain technology; management and storage of wills using blockchain technology; management and storage of intellectual property rights such as copyright using blockchain technology;
09 - Appareils et instruments scientifiques et électriques
35 - Publicité; Affaires commerciales
36 - Services financiers, assurances et affaires immobilières
42 - Services scientifiques, technologiques et industriels, recherche et conception
45 - Services juridiques; services de sécurité; services personnels pour individus
Produits et services
Computer software; computer software for databases; Construction, management, and editing of information in computer databases using blockchain technology; management of data in computer databases using blockchain technology, and provision of information related thereto; Provision of information, guidance, and advice on finance; electronic fund transfers provided via blockchain technology; electronic settlement of payments using blockchain technology-based authentication technology; settlement of payments in virtual currency using blockchain technology; User authentication using blockchain technology; issuance of electronic certificates using blockchain technology; inspection, certification, and authentication as to whether the contents of electronic information on legal documents have been falsified using blockchain technology; design, creation, or maintenance of computer programs; lending of computers; provision of programs for computers; Preparation of documents to be submitted to public offices and other documents related to proof of rights and obligations or facts; proof of the value of intellectual property rights such as copyrights and proof of the time of invention, devising, and creation etc. using blockchain technology; management and storage of wills using blockchain technology; management and storage of intellectual property rights such as copyright using blockchain technology;
A surrounding image display apparatus that comprises an imaging device that captures an image of a surrounding of a vehicle, a display device that displays a surrounding image captured by the imaging device, and an electronic control unit that controls the display device, the electronic control unit being configured to start displaying the surrounding image when it is determined that a driver intends to make a lane departure, and end the displaying of the surrounding image when it is determined that the driver has performed a steering operation without visually confirming a situation of a blind spot on the side of the lane departure.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
B60R 1/27 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision prédéterminé fournissant une vision panoramique, p.ex. en utilisant des caméras omnidirectionnelles
88.
NON-AQUEOUS RECHARGEABLE BATTERY AND METHOD FOR MANUFACTURING NON-AQUEOUS RECHARGEABLE BATTERY
A non-aqueous rechargeable battery includes an electrode body formed by rolling a stack of a positive electrode plate and a negative electrode plate with a separator arranged in between. At least one of the positive electrode plate and the negative electrode plate includes a substrate, a first mixture layer located on an outer side of the substrate, and a second mixture layer located on an inner side of the substrate. The second mixture layer includes an active material having a BET specific surface area that is greater than that of an active material included in the first mixture layer.
H01M 10/0587 - Structure ou fabrication d'accumulateurs ayant uniquement des éléments de structure enroulés, c. à d. des électrodes positives enroulées, des électrodes négatives enroulées et des séparateurs enroulés
A system, method and apparatus for mobile communications including is provided. A user equipment (UE) receives measurement configuration parameters including one or more first measurement configuration parameters for handover decisions associated with one or more first services, the one or more first services associated with a first type of service and one or more second measurement configuration parameters for handover decisions associated with one or more second services. The first services are associated with a first type of service and the second services are associated with a second type of service. The UE transmits one or more measurement reports that include the two types of measurement information. The UE then receives a radio resource control (RRC) reconfiguration message indicating a handover to the target cell and establishes a connection with the target cell based on the received the RRC reconfiguration message.
An object is to confirm that information transmitted to an onboard apparatus mounted on a vehicle has been transmitted to the onboard apparatus. A communication apparatus is mounted on a vehicle and performs specific communication according to an MQTT protocol. A controller of the communication apparatus receives first information transmitted to an onboard apparatus mounted on the vehicle from an external apparatus, which is a transmission source of the first information, by the specific communication, and transmits the received first information to the onboard apparatus. The controller of the communication apparatus receives second information showing that the onboard apparatus has completed reception of the first information, from the onboard apparatus. Then, when receiving the second information, the controller of the communication apparatus transmits third information notifying that the onboard apparatus has completed reception of the first information, to the external apparatus by the specific communication.
H04L 67/12 - Protocoles spécialement adaptés aux environnements propriétaires ou de mise en réseau pour un usage spécial, p.ex. les réseaux médicaux, les réseaux de capteurs, les réseaux dans les véhicules ou les réseaux de mesure à distance
H04L 61/4588 - Répertoires de réseau; Correspondance nom-adresse contenant des informations d'abonné mobile, p.ex. serveur d’abonnés locaux [HSS]
The laminated film of the present disclosure is a laminated film having a metallic foil, a sealant forming layer laminated to the metallic foil, and an optional glassy protective layer, wherein the sealant forming layer comprises a binder resin joining the glass frit and the glass frit to each other, and wherein the 5% weight loss temperature of the binder resin is lower than the glass transition point of the glass constituting the glass frit.
H01M 50/126 - Boîtiers, fourreaux ou enveloppes primaires d’une seule cellule ou d’une seule batterie caractérisés par le matériau ayant une structure en couches comprenant au moins trois couches
A server comprising a processor. Further, the processor acquires credit card information and a one-time password from a vehicle connected to a charging device through a secure first communication path; acquires the one-time password from the vehicle through the charging device and a non-secure second communication path which is different from the first communication path; and charges an amount of money corresponding to an amount of power supplied by the charging device to the vehicle based on the credit card information when the one-time password acquired through the first communication path matches the one-time password acquired through the second communication path.
A server includes a control unit. The control unit determines whether a parked vehicle is used as a shelter based on a first image which is included in an image captured by a camera and which is obtained by imaging the vehicle and surroundings of the vehicle.
An information processing apparatus supports dialogue using dialogue apparatuses used by a plurality of users located remotely from each other. The information processing apparatus includes a controller configured to estimate, during execution of a remote dialogue, a parameter of each interlocutor with respect to a topic of the remote dialogue based on a video of each interlocutor, display an alert, on a first dialogue apparatus of a first user, indicating each interlocutor whose estimated parameter is less than a threshold, and when the first user gazes at and speaks to an interlocutor displayed with the alert among a plurality of interlocutors as second users displayed on a screen of the first dialogue apparatus, transmit first audio data with a high volume to a second dialogue apparatus of the interlocutor and transmit second audio data with a low volume to second dialogue apparatus of interlocutors other than the interlocutor.
G06F 3/01 - Dispositions d'entrée ou dispositions d'entrée et de sortie combinées pour l'interaction entre l'utilisateur et le calculateur
G09B 5/14 - Matériel à but éducatif à commande électrique avec présentation individuelle d'une information à une pluralité de postes d'élèves permettant une communication individuelle entre le professeur et l'élève
H04L 12/18 - Dispositions pour la fourniture de services particuliers aux abonnés pour la diffusion ou les conférences
H04L 65/1089 - Procédures en session en supprimant des médias
It has at least one fixing plate arranged on the seat back and at least one support member arranged on the fixing plate, and the support member can be arranged at an arbitrary angle at an arbitrary position on the front surface of the fixing plate. Therefore, the position of the support member can be adjusted not only in the vertical direction but also in the horizontal direction with respect to the seat back, but also in the angle. Therefore, it is possible to increase the degree of freedom in the position and the angle of the support member as compared with the related art.
The display control ECU causes the display to display a view in a direction selected through the input unit among a plurality of views having mutually different directions obtained from the captured images acquired from the imaging unit that captures an image of the periphery of the vehicle. In addition, the display control ECU is configured such that the traveling state detecting unit that detects the traveling state and the traveling direction of the vehicle detects that the traveling of the vehicle is started, and when the view displayed on the display differs from the traveling direction of the vehicle, the view displayed on the display is switched to the view in the traveling direction of the vehicle.
B60R 1/28 - Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d'images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules pour visualiser une zone extérieure au véhicule, p.ex. l’extérieur du véhicule avec un champ de vision réglable
A lithium-ion rechargeable battery includes a negative electrode plate including a negative electrode substrate and a negative electrode mixture layer applied to the substrate, a positive electrode plate including a positive electrode substrate and a positive electrode mixture layer applied to the substrate, a separator arranged between the negative electrode plate and the positive electrode plate, and a non-aqueous electrolyte. The negative electrode substrate includes a negative electrode connection portion that projects from the negative electrode mixture layer in a first width direction. The positive electrode substrate includes a positive electrode connection portion that projects from the positive electrode mixture layer in a second width direction. The separator has a gas permeability that is greater at a portion facing an end of the positive electrode mixture layer in the second width direction than a portion facing an end of the positive electrode mixture layer in the first width direction.
H01M 10/0525 - Batteries du type "rocking chair" ou "fauteuil à bascule", p.ex. batteries à insertion ou intercalation de lithium dans les deux électrodes; Batteries à l'ion lithium
H01M 10/0585 - Structure ou fabrication d'accumulateurs ayant uniquement des éléments de structure plats, c. à d. des électrodes positives plates, des électrodes négatives plates et des séparateurs plats
A coolant composition includes a mineral oil or a synthetic oil and a surfactant, in which a conductivity of the coolant composition is lower than 0.1 μS/cm, and the surfactant is a nonionic surfactant that is a fatty acid ester having a freezing point of lower than −15° C. and having a cyclic structure.
C09K 5/06 - Substances qui subissent un changement d'état physique lors de leur utilisation le changement d'état se faisant par passage de l'état liquide à l'état solide, ou vice versa
99.
COMMUNICATION SYSTEM, BASE STATION, AND COMMUNICATION METHOD
A communication system comprising a first base station that includes a first controller and a second base station that includes a second controller, wherein the first controller is configured to transmit a handover request to the second base station in a case where handover of a user terminal to the second base station is required, the second controller is configured to transmit a handover response to the first base station in response to reception of the handover request, the handover response including a renewable energy use rate of the second base station, and the first controller is configured to transmit a handover command to the user terminal in response to reception of the handover response, the handover command including the renewable energy use rate or a data transmission control command according to the renewable energy use rate.
A control device includes: a monitoring unit that monitors a storage amount and a temperature of a battery that supplies electric power for executing a software update process; a determination unit that determines whether or not the storage amount of the battery is equal to or greater than the first storage amount and whether or not the temperature of the battery is equal to or greater than the first temperature; and a control unit that, when the temperature of the battery at the time of starting the vehicle is less than the second temperature that is lower than the first temperature, performs control for executing the update process when the determination unit determines that the storage amount of the battery is equal to or greater than the first storage amount and the temperature of the battery is equal to or greater than the first temperature after the vehicle finishes traveling.