A laser controller having an electronic distance measuring instrument and a laser light transmitter creating a vertical laser plane is used with a remote controller and a movable target for point layout tasks. The electronic distance measurer and laser transmitter are mounted on the same vertical pivot axis. Once the system is set-up for a particular jobsite, the laser plane can be aimed at a specific point of interest on the jobsite floor, and a visible laser light line will then appear on the floor, from the laser controller, all the way to that point of interest. The distance measuring instrument is aimed along the same heading as the laser plane, and it gives the distance to the movable target, which is moved along the visible laser light line, until reaching the specified distance, and thereby find the point of interest.
G01C 3/00 - Mesure des distances dans la ligne de visée; Télémètres optiques
G01S 7/48 - DÉTERMINATION DE LA DIRECTION PAR RADIO; RADIO-NAVIGATION; DÉTERMINATION DE LA DISTANCE OU DE LA VITESSE EN UTILISANT DES ONDES RADIO; LOCALISATION OU DÉTECTION DE LA PRÉSENCE EN UTILISANT LA RÉFLEXION OU LA RERADIATION D'ONDES RADIO; DISPOSITIONS ANALOGUES UTILISANT D'AUTRES ONDES - Détails des systèmes correspondant aux groupes , , de systèmes selon le groupe
G01C 3/08 - Utilisation de détecteurs électriques de radiations
G01S 17/74 - Systèmes utilisant la reradiation d'ondes électromagnétiques autres que les ondes radio, p.ex. pour l'identification ami–ennemi
G01S 7/00 - DÉTERMINATION DE LA DIRECTION PAR RADIO; RADIO-NAVIGATION; DÉTERMINATION DE LA DISTANCE OU DE LA VITESSE EN UTILISANT DES ONDES RADIO; LOCALISATION OU DÉTECTION DE LA PRÉSENCE EN UTILISANT LA RÉFLEXION OU LA RERADIATION D'ONDES RADIO; DISPOSITIONS ANALOGUES UTILISANT D'AUTRES ONDES - Détails des systèmes correspondant aux groupes , ,
G01S 17/42 - Mesure simultanée de la distance et d'autres coordonnées
2.
All-in-one integrated sensing device for machine control
An integrated sensing device with a suite of sensors assists construction machine operators in finding the correct level to dig a ditch/trench. The sensing device includes a gravity sensor to determine angles, a laser distance meter (LDM), and a laser receiver for detecting a known jobsite elevation. The sensing device is mounted to the dipper stick of an excavator; the gravity sensor detects the angle of the stick, and the laser receiver detects a laser plane of light that represents a known jobsite elevation. The LDM is aimed at another member of the machine that moves in a predetermined path as the bucket is rotated, and the distance between the LDM and the target member is used to calculate the vertical elevation of the working tool edge. A display graphically shows the operator the proper dig depth and the present position of the working tool edge.
G01B 11/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
G01M 1/12 - Equilibrage statique; Détermination de la position du centre de gravité
3.
Point layout system using single laser transmitter
A laser controller having an electronic distance measuring instrument and a laser light transmitter creating a vertical laser plane is used with a remote controller and a movable target for point layout tasks. The electronic distance measurer and laser transmitter are mounted on the same vertical pivot axis. Once the system is set-up for a particular jobsite, the laser plane can be aimed at a specific point of interest on the jobsite floor, and a visible laser light line will then appear on the floor, from the laser controller, all the way to that point of interest. The distance measuring instrument is aimed along the same heading as the laser plane, and it gives the distance to the movable target, which is moved along the visible laser light line, until reaching the specified distance, and thereby find the point of interest.
G01S 17/74 - Systèmes utilisant la reradiation d'ondes électromagnétiques autres que les ondes radio, p.ex. pour l'identification ami–ennemi
G01S 7/00 - DÉTERMINATION DE LA DIRECTION PAR RADIO; RADIO-NAVIGATION; DÉTERMINATION DE LA DISTANCE OU DE LA VITESSE EN UTILISANT DES ONDES RADIO; LOCALISATION OU DÉTECTION DE LA PRÉSENCE EN UTILISANT LA RÉFLEXION OU LA RERADIATION D'ONDES RADIO; DISPOSITIONS ANALOGUES UTILISANT D'AUTRES ONDES - Détails des systèmes correspondant aux groupes , ,
G01S 17/42 - Mesure simultanée de la distance et d'autres coordonnées
4.
Display screen or portion thereof with a graphical user interface
An apparatus for use with a commercial vehicle comprises a media recorder configured to receive video from one or more cameras. The media recorder comprises a memory configured to store a loop of the video as a circular buffer having a predetermined duration. A transceiver is communicatively coupled to the media recorder and configured to receive a video request command generated at a central office. An event detector is configured to communicate with a vehicle computer and detect predetermined events occurring during vehicle operation. The media recorder is configured to retrieve a portion of the loop of video stored in the memory and the transceiver is configured to transmit the portion of the loop of video to the central office in response to the video request command.
G06F 17/30 - Recherche documentaire; Structures de bases de données à cet effet
H04N 5/77 - Circuits d'interface entre un appareil d'enregistrement et un autre appareil entre un appareil d'enregistrement et une caméra de télévision
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
H04N 5/907 - Enregistrement du signal de télévision utilisant des mémoires, p.ex. des tubes à mémoires ou des mémoires à semi-conducteurs
G07C 5/00 - Enregistrement ou indication du fonctionnement de véhicules
G07C 5/08 - Enregistrement ou indication de données de marche autres que le temps de circulation, de fonctionnement, d'arrêt ou d'attente, avec ou sans enregistrement des temps de circulation, de fonctionnement, d'arrêt ou d'attente
7.
Methods for assigning traceability information to and retrieving traceability information from a store shelf
A shelf code in a machine readable format, such as on a QR code on a printed card, is provided where bulk merchandise displayed in a bin. When the bin is stocked from a case bearing a case code, the case code is associated with the shelf code. Lot-specific and lot-independent information previously associated with the case code is then linked to the shelf code. Consumers scan the shelf code with a mobile device to establish a communication channel to access the linked information. Retailers and producers use the channel to reach the consumer, and to solicit feedback from the consumer at a known time and location. A mobile device can also be used to associate quality assessments of merchandise to the shelf code. Analysis of consumer ratings and quality inspection assessments that are tied to time and location can provide valuable insights to both producers and retailers.
A method of image-based positioning is provided. The method comprises: (A) providing an image-capturing device integrated with an object; (B) providing a pattern-generating device configured to generate a set of patterns; (C) locating the pattern-generating device in a field of view (FOV) of the image-capturing device and capturing an image of the pattern-generating device; (D) generating at least one set of pattern data by using the captured image of the pattern-generating device; and (E) processing each set of generated pattern data by using in order to generate an altitude and/or angular coordinates of the object.
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
G01B 11/25 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer des contours ou des courbes en projetant un motif, p.ex. des franges de moiré, sur l'objet
G01B 11/02 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la longueur, la largeur ou l'épaisseur
A radio frequency identification (RFID) tower crane load locator and sway indicator includes: a plurality of RFID tags at different locations on or around the crane; at least two RFID readers at different locations on the crane; a navigation satellite system (NSS) position receiver; and a load information interface. The RFID readers comprise a range determiner to provide range measurements between each of the RFID readers and each of the RFID tags. The sway determiner is coupled with a hook block of the crane. The NSS position receiver is coupled with the crane and comprises an antenna fixedly coupled with approximately the front of a jib of the crane. The load information interface combines information from range measurements, the sway determiner and the NSS position receiver to generate location and sway information of the load with respect to the crane and provide this information in a user accessible format.
B66C 13/16 - Utilisation de dispositifs indicateurs de positionnement ou de pesée
B66C 13/46 - Indicateurs de position pour charges suspendues ou pour éléments de grues
B66C 23/28 - Installations comportant essentiellement un palonnier, une flèche ou une structure triangulaire agissant comme bras de levier, montées de façon à permettre des mouvements de translation ou d'orientation dans des plans verticaux ou horizontaux, ou bie spécialement adaptées pour être utilisées dans des emplacements particuliers ou à des usages particuliers faites, p.ex. de pièces détachées, pour permettre un assemblage ou démontage rapides, pour travailler à des niveaux de plus en plus élevés, pour être transportées par route ou par rail faites pour travailler à des niveaux de plus en plus élevés
G01S 19/46 - Détermination de position en combinant les mesures des signaux provenant du système de positionnement satellitaire à radiophares avec une mesure supplémentaire la mesure supplémentaire étant du type signal d'onde radioélectrique
10.
Micro climate corrections for radar interferometry measurements
A method for monitoring movement of a surface using ground based radar interferometry measurements includes identifying micro climates on the surface and determining boundaries of the micro climates on the surface. One or more first sensors are arranged at a measurement site for measuring first atmospheric conditions at the measurement site. One or more additional sensors are arranged in each of the micro climates for measuring atmospheric conditions in the micro climates. An atmospheric correction is determined for each of the micro climates. The atmospheric correction for each micro climate is based on the first atmospheric conditions at the measurement site and the atmospheric conditions at the micro climate. The ground based radar interferometry measurements are performed across the surface, and the ground based radar interferometry measurements within the boundary of each micro climate are corrected using the atmospheric correction for the micro climate.
G01S 13/90 - Radar ou systèmes analogues, spécialement adaptés pour des applications spécifiques pour la cartographie ou la représentation utilisant des techniques d'antenne synthétique
11.
Farm vehicle autopilot with automatic calibration, tuning and diagnostics
Automatic calibration, tuning and diagnostics improve precision farming by helping farmers obtain best performance from their autopilot-guided vehicles. Automatic calibration procedures that cannot be accurately performed by human drivers, automatic autopilot tuning, and simplified diagnostics are all parts of an advanced farm vehicle autopilot system.
G05D 1/00 - Commande de la position, du cap, de l'altitude ou de l'attitude des véhicules terrestres, aquatiques, aériens ou spatiaux, p.ex. pilote automatique
A01B 69/00 - Direction des machines ou instruments agricoles; Guidage des machines ou instruments agricoles selon un parcours déterminé
A radio frequency identification (RFID) tag distance measuring system and method is disclosed. One example includes a first replica path that receives a signal that is simultaneously transmitted to an RFID tag. The first replica path includes a plurality of taps at known distances along the first replica path. Each of the plurality of taps has a first tap input coupled with the first replica path. In addition, an RFID signal receiver receives a return signal from the RFID tag and provides the return signal along a measurement input, wherein each of the plurality of taps have a second tap input coupled with the measurement path. A distance determiner detects at least the first of the plurality of taps to have an output and determine a distance measurement to the RFID tag based thereon.
G06K 7/00 - Méthodes ou dispositions pour la lecture de supports d'enregistrement
G01S 5/14 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant les ondes radioélectriques déterminant des distances absolues à partir de plusieurs points espacés d'emplacement connu
G01S 5/30 - Détermination de distances absolues à partir de plusieurs points espacés d'emplacement connu
G01S 13/08 - Systèmes pour mesurer la distance uniquement
G01S 13/78 - Systèmes utilisant la reradiation d'ondes radio, p.ex. du type radar secondaire; Systèmes analogues dans lesquels des signaux de type pulsé sont transmis effectuant la discrimination entre différents types de cibles, p.ex. radar pour l'identification ami–ennemi
G01S 13/74 - Systèmes utilisant la reradiation d'ondes radio, p.ex. du type radar secondaire; Systèmes analogues
G01S 5/02 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant les ondes radioélectriques
G06K 19/077 - Supports d'enregistrement avec des marques conductrices, des circuits imprimés ou des éléments de circuit à semi-conducteurs, p.ex. cartes d'identité ou cartes de crédit avec des puces à circuit intégré - Détails de structure, p.ex. montage de circuits dans le support
Disclosed is a guidance system that helps an earthmoving machine operator to control exactly to what elevation to dig. The system includes an electronic sensing device and a display monitor. In one embodiment, the electronic sensing device includes a distance measuring sensor (LDM), an elevation detecting sensor, an orientation sensor, and a steering mechanism for the LDM. The sensing device is mounted to an earthmoving machine, and sends signals to the display showing the machine operator where to move the digging tool for digging to the desired elevation. The various sensors in the sensing device are calibrated at the factory, so the sensing device can be mounted to an earthmoving machine and then be immediately used by that machine without needing any calibration that involves the machine itself, which is a huge advantage for the equipment operator. The measurements are made via non-contact sensors, thereby preserving the jobsite surface.
Novel tools and techniques for creating and implementing three-dimensional guidance paths for use in conjunction with more or one agricultural vehicles operating in an area of operation.
G01S 5/16 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant des ondes électromagnétiques autres que les ondes radio
A01B 69/04 - Adaptations particulières de la conduite automatique du tracteur, p.ex. systèmes électriques pour labourage selon les courbes de niveau
G05D 1/02 - Commande de la position ou du cap par référence à un système à deux dimensions
A system comprises a transmitter unit configured for mounting at a trailer connected to a tractor. The transmitter unit comprises a video input for receiving video data from one or more trailer cameras, a power input for receiving power from a power line of the trailer, and a wireless communication module for communicating with a mobile communication device. A memory is configured to store trailer information received from the wireless communication module, the trailer information uniquely identifying the trailer. A transmitter is configured to wirelessly transmit the video data. A receiver unit is configured for mounting at the tractor and comprises a receiver for wirelessly receiving the video data transmitted by the transmitter, a power input for receiving power from a power line of the tractor, and an output for outputting the received video data. The receiver unit is further configured to receive the trailer information from the transmitter unit.
B60R 1/00 - Dispositions pour la visibilité optique; Dispositions de visualisation en temps réel pour les conducteurs ou les passagers utilisant des systèmes de capture d’images optiques, p.ex. des caméras ou des systèmes vidéo spécialement adaptés pour être utilisés dans ou sur des véhicules
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
H04N 5/247 - Disposition des caméras de télévision
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
H01R 27/02 - Pièces de couplage adaptées à la coopération avec plusieurs pièces complémentaires dissemblables pour coopération simultanée avec plusieurs pièces complémentaires
17.
All-in-one integrated sensing device for machine control
An integrated sensing device with a suite of sensors assists construction machine operators in finding the correct level to dig a ditch/trench. The sensing device includes a gravity sensor to determine angles, a laser distance meter (LDM), and a laser receiver for detecting a known jobsite elevation. The sensing device is mounted to the dipper stick of an excavator; the gravity sensor detects the angle of the stick, and the laser receiver detects a laser plane of light that represents a known jobsite elevation. The LDM is aimed at another member of the machine that moves in a predetermined path as the bucket is rotated, and the distance between the LDM and the target member is used to calculate the vertical elevation of the working tool edge. A display graphically shows the operator the proper dig depth and the present position of the working tool edge.
G01B 11/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
G01S 19/14 - Récepteurs spécialement adaptés pour des applications spécifiques
G01S 17/02 - Systèmes utilisant la réflexion d'ondes électromagnétiques autres que les ondes radio
G01S 17/88 - Systèmes lidar, spécialement adaptés pour des applications spécifiques
E02F 3/43 - Commande de la position du plongeur ou de l'auge; Commande de la succession des opérations d'entraînement
A system includes a motion sensor system configured for deployment in a cab of a vehicle and to generate substantially in real-time a digital mapping of driver movement during operation of the vehicle. A computer is configured for deployment in the cab and coupled to the motion sensor system. A driver behavior detector is coupled to the computer and configured to detect a driver distraction event using the driver movement mapping. A communication device at the vehicle is configured to communicate an alert message to one or both of a user interface device in the cab and a remote system in response to the detected driver distraction event.
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
B60W 40/08 - Calcul ou estimation des paramètres de fonctionnement pour les systèmes d'aide à la conduite de véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier liés aux conducteurs ou aux passagers
19.
Changing wireless carriers during a mobile gateway session
A first performance measure is determined of an existing data session between a mobile gateway and a cloud gateway via a first wireless carrier. Second performance measures of others of the wireless carriers are determined during the existing data session. Based on the first performance measure and the second performance measures, the existing data session is continued with the cloud gateway via a second of the wireless carriers.
A system for use with a vehicle comprising a tractor and a trailer includes one or more image capture devices. The one or more image capture devices capture images of the interior of a trailer and/or cargo items of the trailer. An image processor estimates available cargo space within the trailer based on the captured images.
A surveying system comprising a station and rover is used to make field measurements of a job site. The station at a first location has one or more cameras and one or more targets. The rover has one or more cameras and one or more targets. The rover is moved to a plurality of locations and images are acquired of the one or more targets of the station and/or the rover. The images are used to determine a spatial relationship between the first location and the plurality of locations.
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
A method for method for simulating a lift plan including: accessing a set of crane capability parameters for a crane at a worksite; accessing data relating to a set of factors, if any, occurring external to the crane, wherein the set of factors affects an operation of the crane at the worksite; based on the set of crane capability parameters, the data relating to the set of factors, if any, occurring external to the crane and affecting the operation of the crane and a movement plan for moving a set of objects at the worksite, generating a lift plan for the set of objects at the worksite; and generating a 3-D simulation of the lift plan.
G06F 19/00 - Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des applications spécifiques (spécialement adaptés à des fonctions spécifiques G06F 17/00;systèmes ou méthodes de traitement de données spécialement adaptés à des fins administratives, commerciales, financières, de gestion, de surveillance ou de prévision G06Q;informatique médicale G16H)
B66C 13/48 - Commande automatique de l'entraînement des grues pour produire un cycle de travail unique ou répété; Commande par programmation
Active imaging systems for plant growth monitoring acquire images in which each pixel represents an absolute NDVI value obtained with active illumination.
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
H04N 5/335 - Transformation d'informations lumineuses ou analogues en informations électriques utilisant des capteurs d'images à l'état solide [capteurs SSIS]
H04N 5/33 - Transformation des rayonnements infrarouges
Efficient towed implement guidance to a desired path is achieved by guiding a towing vehicle toward a path on the opposite side of a desired path, then guiding the vehicle back to the desired path. Efficient forward implement guidance to a desired path is achieved by guiding a pushing vehicle along a tractrix. A vehicle leaves a straight line along a tractrix to keep a rear implement on the line as long as possible.
A method for performing a dynamic load test on a bridge includes providing a vehicle with an imaging device coupled to the vehicle and moving the vehicle across the bridge. While moving the vehicle across the bridge, a series of images is obtained using the imaging device. A position of the vehicle on the bridge is determined as a function of time using the series of images, and a response of the bridge is determined as a function of time as the vehicle crosses the bridge. The position of the vehicle on the bridge is associated with the response of the bridge.
Information is collected by acquiring imaging data of a plurality of objects using an imaging tool; creating a three-dimensional representation of the plurality of objects based on the imaging data; and extracting RFID data stored in an RFID tag using an RFID reader. The RFID tag has a reference to a three-dimensional model. The three-dimensional model is created before acquiring the imaging data of the plurality of objects. And the three-dimensional model is a representation of at least one object of the plurality of objects.
G06F 17/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des fonctions spécifiques
H04N 1/00 - Balayage, transmission ou reproduction de documents ou similaires, p.ex. transmission de fac-similés; Leurs détails
G01C 15/00 - Instruments de géodésie ou accessoires non prévus dans les groupes
H04N 1/32 - Circuits ou dispositions pour la commande ou le contrôle entre l'émetteur et le récepteur
G01C 11/02 - Dispositions de prises de vues spécialement adaptées pour la photogrammétrie ou les levers photographiques, p.ex. pour commander le recouvrement des photos
Novel tools and techniques for performing steering operations for a tracked vehicle with a dragged implement using a control system that uses a combination of differential steering and rudder steering based on one or more operating conditions of the vehicle.
A01B 69/00 - Direction des machines ou instruments agricoles; Guidage des machines ou instruments agricoles selon un parcours déterminé
B62D 6/00 - Dispositions pour la commande automatique de la direction en fonction des conditions de conduite, qui sont détectées et pour lesquelles une réaction est appliquée, p.ex. circuits de commande
B62D 11/10 - Direction pour roues non orientables; Direction pour véhicules à chenilles ou à dispositifs similaires par entraînement différencié des éléments en contact avec le sol sur les côtés opposés du véhicule par une seule source d'énergie principale en utilisant des mécanismes de transmission avec sorties de puissance différenciées sur côtés opposés, p.ex. des mécanismes de transmission à différentiel couplé ou épicycloïdaux
B62D 11/14 - Direction pour roues non orientables; Direction pour véhicules à chenilles ou à dispositifs similaires par entraînement différencié des éléments en contact avec le sol sur les côtés opposés du véhicule par une seule source d'énergie principale en utilisant des mécanismes de transmission avec sorties de puissance différenciées sur côtés opposés, p.ex. des mécanismes de transmission à différentiel couplé ou épicycloïdaux les sorties de puissance différenciées étant réalisées par un apport d'énergie supplémentaire d'un côté, p.ex. énergie provenant d'une source secondaire
B62D 11/02 - Direction pour roues non orientables; Direction pour véhicules à chenilles ou à dispositifs similaires par entraînement différencié des éléments en contact avec le sol sur les côtés opposés du véhicule
B62D 7/15 - Timonerie de direction; Fusées ou leur montage pour roues pivotant individuellement, p.ex. sur pivot de fusée les axes de pivotement étant situés dans plus d'un plan perpendiculaire à l'axe longitudinal du véhicule, p.ex. toutes les roues étant directrices caractérisée par des moyens modifiant le rapport entre les angles de direction des roues directrices
29.
Extracting pseudorange information using a cellular device
Pseudorange information is extracted by a cellular device from a Global Navigation Satellite System (GNSS) chipset of the cellular device. The cellular device accesses the GNSS chipset embedded within the cellular device where the GNSS chipset calculates pseudorange information for use by the GNSS chipset. The cellular device extracts the pseudorange information from the GNSS chipset for use elsewhere in the cellular device outside of the GNSS chipset.
H04W 24/00 - Dispositions de supervision, de contrôle ou de test
H04M 11/00 - Systèmes de communication téléphonique spécialement adaptés pour être combinés avec d'autres systèmes électriques
G01S 19/39 - Détermination d'une solution de navigation au moyen des signaux émis par un système de positionnement satellitaire à radiophares le système de positionnement satellitaire à radiophares transmettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système mondial de satellites de navigation] ou GALILEO
G01S 19/07 - Systèmes de positionnement par satellite à radiophares émettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système global de navigation par satellite] ou GALILEO Éléments coopérants; Interaction ou communication entre les différents éléments coopérants ou entre les éléments coopérants et les récepteurs fournissant des données pour corriger les données de positionnement mesurées, p.ex. DGPS [GPS différentiel] ou corrections ionosphériques
H04W 4/02 - Services utilisant des informations de localisation
G01S 19/43 - Détermination de position utilisant l'interférométrie à ligne de base longue ou courte
G01S 19/48 - Détermination de position en combinant ou en commutant entre les solutions de position dérivées du système de positionnement par satellite à radiophares et les solutions de position dérivées d'un autre système
G01S 19/25 - Acquisition ou poursuite des signaux émis par le système faisant intervenir des données d'assistance reçues en provenance d'un élément coopérant, p.ex. un GPS assisté
G01S 5/00 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance
H04M 3/00 - Centraux automatiques ou semi-automatiques
H04W 64/00 - Localisation d'utilisateurs ou de terminaux pour la gestion du réseau, p.ex. gestion de la mobilité
Novel tools and techniques for determining a blended position solution for a vehicle, using data from multiple positioning devices, some of which can be external to the vehicle. Some techniques allow a control system of a vehicle to transition from receiving position data from one positioning device to receiving data from another device without ceasing operation and/or while limiting any resulting discontinuity the position solution (and any resulting work performed by the vehicle) to within acceptable tolerances.
B60W 30/00 - Fonctions des systèmes d'aide à la conduite des véhicules routiers non liées à la commande d'un sous-ensemble particulier, p.ex. de systèmes comportant la commande conjuguée de plusieurs sous-ensembles du véhicule
E02F 3/84 - Entraînement ou dispositifs de commande correspondants
E01C 19/00 - Machines, outillage ou dispositifs auxiliaires pour préparer ou répartir les matériaux de revêtement, pour travailler les matériaux mis en place, ou pour façonner, consolider ou finir le revêtement
G05D 1/02 - Commande de la position ou du cap par référence à un système à deux dimensions
B62D 15/02 - Indicateurs de direction ou aides de direction
A01B 69/04 - Adaptations particulières de la conduite automatique du tracteur, p.ex. systèmes électriques pour labourage selon les courbes de niveau
B62D 6/00 - Dispositions pour la commande automatique de la direction en fonction des conditions de conduite, qui sont détectées et pour lesquelles une réaction est appliquée, p.ex. circuits de commande
Systems and methods for warning of proximity in a worksite are disclosed. A second transceiver is detected at a first transceiver, wherein the first transceiver is a mobile wearable device, and wherein the first transceiver and the second transceiver are located at a worksite. An ad-hoc network is established, at the first transceiver, between the first transceiver and the second transceiver. A distance is calculated, at the first transceiver, in three dimensions between the first transceiver and the second transceiver based on the detecting the second transceiver. A first safety envelope is defined, at the first transceiver, about the first transceiver and a second safety envelope about the second transceiver. An alarm is issued, at the first transceiver, when the first safety envelope comes in contact with the second safety envelope.
G06F 19/00 - Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des applications spécifiques (spécialement adaptés à des fonctions spécifiques G06F 17/00;systèmes ou méthodes de traitement de données spécialement adaptés à des fins administratives, commerciales, financières, de gestion, de surveillance ou de prévision G06Q;informatique médicale G16H)
G08B 1/08 - Systèmes de signalisation caractérisés seulement par la forme de transmission du signal utilisant une transmission électrique
B66C 13/40 - Utilisation de dispositifs pour transmettre des impulsions de commande; Utilisation de dispositifs de commande à distance
B66C 15/04 - Mécanismes de sécurité pour empêcher les collisions, p.ex. entre les grues ou les chariots à treuil travaillant sur la même voie
G01S 17/06 - Systèmes déterminant les données relatives à la position d'une cible
G01S 13/06 - Systèmes déterminant les données relatives à la position d'une cible
G01S 13/93 - Radar ou systèmes analogues, spécialement adaptés pour des applications spécifiques pour prévenir les collisions
G01S 15/06 - Systèmes déterminant les données relatives à la position d'une cible
B66C 13/46 - Indicateurs de position pour charges suspendues ou pour éléments de grues
B66C 15/06 - Aménagement ou utilisation de dispositifs avertisseurs
G01S 19/14 - Récepteurs spécialement adaptés pour des applications spécifiques
G01S 5/02 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant les ondes radioélectriques
A method and system for long-life asset tracking is disclosed. One example utilizes an activation module to provide an activation signal to at least a portion of the long-life asset tracker. A position determiner receives the activation signal and determines a location of the long-life asset tracker with a first level of accuracy or a second level of accuracy, wherein the second level of accuracy is more accurate than the first level of accuracy and wherein a default mode of operation is to utilize a radio locator for position determination instead of a navigation satellite system module to extend the life of a power source of the long-life asset tracker. An information provider module to broadcast the location of the long-life asset tracker is also disclosed.
G01S 19/48 - Détermination de position en combinant ou en commutant entre les solutions de position dérivées du système de positionnement par satellite à radiophares et les solutions de position dérivées d'un autre système
34.
Utilizing information about mobile communication devices with respect to an area of interest
A method for establishing an approximate number of persons in an area of interest comprises providing a request to one or more communications providers that cover an area of interest. The request is for a listing of any mobile communication devices located within the area of interest. The listing of any mobile communication devices located within the area of interest is utilized to establish an approximate number of persons in the area of interest.
G08G 1/0967 - Systèmes impliquant la transmission d'informations pour les grands axes de circulation, p.ex. conditions météorologiques, limites de vitesse
G08G 1/00 - Systèmes de commande du trafic pour véhicules routiers
H04W 4/02 - Services utilisant des informations de localisation
In a method of milling asphalt, a relative elevation of an unmilled asphalt pavement surface adjacent to an area to be milled is sensed with respect to a milling machine body and rotatable milling drum of the milling machine. An elevation of a bottom surface of the rotatable milling drum is determined using a computer processor. Based on a map, stored in a computer memory, of a design surface specifying a design elevation of a milled surface over the area to be milled, the elevation of the milling machine body and the rotatable milling drum are automatically adjusted such that the rotatable milling drum mills the asphalt surface to the design elevation over the area to be milled.
E01C 23/07 - Appareils combinant la mesure de la configuration superficielle du revêtement avec l'application de matériau proportionnellement aux irrégularités mesurées
E01C 23/08 - Dispositifs ou aménagements pour travailler la surface terminée; Dispositifs pour réparer la surface des revêtements endommagés pour égaliser en supprimant les parties saillantes ou pour retirer des matériaux liaisonnés sur la surface, p.ex. des marques
G06F 7/70 - Méthodes ou dispositions pour effectuer des calculs en utilisant une représentation numérique non codée, c. à d. une représentation de nombres sans base; Dispositifs de calcul utilisant une combinaison de représentations de nombres codées et non codées utilisant des trains d'impulsions stochastiques, c. à d. des impulsions apparaissant au hasard et dont la moyenne des taux d'impulsion représente des nombres
E21C 25/00 - Machines à inciser, c. à d. pratiquant des saignées approximativement parallèles ou perpendiculaires à la veine
E01C 23/085 - Dispositifs ou aménagements pour travailler la surface terminée; Dispositifs pour réparer la surface des revêtements endommagés pour égaliser en supprimant les parties saillantes ou pour retirer des matériaux liaisonnés sur la surface, p.ex. des marques utilisant des outils propulsés, p.ex. des outils vibrants
Systems and methods are directed to monitoring and assessing driver behavior. A system comprises an interface configured to receive vehicle data acquired by a computer system of a vehicle, a wireless transceiver configured to effect communications with a central office via one or more networks, a display, memory configured to store scoring algorithms, and a processor. The processor is configured to receive at least some of the vehicle data, and generate, in substantially real-time and independently from the central office, a plurality of scores for a plurality of scoring parameters using the stored scoring algorithms and the received vehicle data. The processor is also configured to update, in substantially real-time and independently from the central office, the plurality of scores during a predetermined period of time, and cooperate with the display to present the plurality of scores on the display during the predetermined period of time.
G07C 5/08 - Enregistrement ou indication de données de marche autres que le temps de circulation, de fonctionnement, d'arrêt ou d'attente, avec ou sans enregistrement des temps de circulation, de fonctionnement, d'arrêt ou d'attente
G06Q 10/06 - Ressources, gestion de tâches, des ressources humaines ou de projets; Planification d’entreprise ou d’organisation; Modélisation d’entreprise ou d’organisation
B60W 50/14 - Moyens d'information du conducteur, pour l'avertir ou provoquer son intervention
B60K 35/00 - Agencement ou adaptations des instruments
B60W 30/04 - Commande de la stabilité dynamique du véhicule destinée à la prévention du basculement
B60W 30/12 - Maintien de la trajectoire dans une voie de circulation
B60W 30/16 - Contrôle de la distance entre les véhicules, p.ex. pour maintenir la distance avec le véhicule qui précède
B60W 50/00 - COMMANDE CONJUGUÉE DE PLUSIEURS SOUS-ENSEMBLES D'UN VÉHICULE, DE FONCTION OU DE TYPE DIFFÉRENTS; SYSTÈMES DE COMMANDE SPÉCIALEMENT ADAPTÉS AUX VÉHICULES HYBRIDES; SYSTÈMES D'AIDE À LA CONDUITE DE VÉHICULES ROUTIERS, NON LIÉS À LA COMMANDE D'UN SOUS-ENSEMBLE PARTICULIER - Détails des systèmes d'aide à la conduite des véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier
B60W 50/04 - COMMANDE CONJUGUÉE DE PLUSIEURS SOUS-ENSEMBLES D'UN VÉHICULE, DE FONCTION OU DE TYPE DIFFÉRENTS; SYSTÈMES DE COMMANDE SPÉCIALEMENT ADAPTÉS AUX VÉHICULES HYBRIDES; SYSTÈMES D'AIDE À LA CONDUITE DE VÉHICULES ROUTIERS, NON LIÉS À LA COMMANDE D'UN SOUS-ENSEMBLE PARTICULIER - Détails des systèmes d'aide à la conduite des véhicules routiers qui ne sont pas liés à la commande d'un sous-ensemble particulier pour surveiller le fonctionnement du système d'aide à la conduite
37.
Method and system for 3D modeling using feature detection
A method includes providing a processor, obtaining an image of a scene including one or more objects, and presenting, using the processor, the image of the scene to a user. The method also includes receiving a geometry type associated with one of the one or more objects, receiving a set of inputs from the user related to the one of the one or more objects, and determining, using the processor, a centerline of the one of the one or more objects. The method further includes measuring, using the processor and inputs from the user, two or more coordinate positions along the centerline, receiving a dimension associated with the one of the one or more objects, and creating, using the processor, a 3D solid model using the geometry type, the dimension, the set of inputs, and the two or more coordinate positions.
A video alignment system is described in which the location of a modulated spot in a video scene is estimated with correlation techniques including tracking multiple camera phase shift candidates and normalizing correlation sums with a voting system.
G06K 9/46 - Extraction d'éléments ou de caractéristiques de l'image
G01B 11/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
H04N 7/18 - Systèmes de télévision en circuit fermé [CCTV], c. à d. systèmes dans lesquels le signal vidéo n'est pas diffusé
In a method of establishing the location of a pair construction points for a stud in a building, the points are defined by x and y coordinates. A beam of laser light is used to determine a z coordinate of each of the pair of construction points on surfaces of the building. The construction points are established by directing a beam of laser light toward defined x and y coordinate locations and establishing the z coordinate location of the construction points on building surfaces that have the defined x and y coordinates.
G01G 19/12 - Appareils ou méthodes de pesée adaptés à des fins particulières non prévues dans les groupes pour incorporation dans des véhicules ayant des dispositifs électriques sensibles au poids
G01G 19/03 - Appareils ou méthodes de pesée adaptés à des fins particulières non prévues dans les groupes pour peser des objets à roues ou roulants, p.ex. des véhicules pour peser pendant le mouvement
G01G 9/00 - Méthodes ou appareils pour la détermination du poids, non prévus dans les groupes
G01L 1/22 - Mesure des forces ou des contraintes, en général en faisant usage des cellules électrocinétiques, c. à d. des cellules contenant un liquide, dans lesquelles un potentiel électrique est produit ou modifié par l'application d'une contrainte en utilisant des jauges de contrainte à résistance
G01L 5/00 - Appareils ou procédés pour la mesure des forces, du travail, de la puissance mécanique ou du couple, spécialement adaptés à des fins spécifiques
G01G 23/37 - Dispositifs indicateurs, p.ex. pour indication à distance; Dispositifs enregistreurs; Echelles, p.ex. graduées indiquant le poids par des moyens électriques, p.ex. par utilisation de cellules photo-électriques impliquant un comptage numérique
G01L 5/16 - Appareils ou procédés pour la mesure des forces, du travail, de la puissance mécanique ou du couple, spécialement adaptés à des fins spécifiques pour la mesure de plusieurs composantes de la force
G07C 5/08 - Enregistrement ou indication de données de marche autres que le temps de circulation, de fonctionnement, d'arrêt ou d'attente, avec ou sans enregistrement des temps de circulation, de fonctionnement, d'arrêt ou d'attente
41.
External electronic distance measurement accessory for a mobile data collection platform
A known fixed relationship is maintained between an external electronic distance measurement accessory and a mobile data collection platform that are physically coupled together. A light beam axis of the external electronic distance measurement accessory is parallel with an optical axis of an entrance pupil of the mobile data collection platform. The external electronic distance measurement accessory integrates with the mobile data collection platform. The external electronic distance measurement accessory receives control instructions from the mobile data collection platform.
G01B 11/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
H04M 1/215 - Combinaisons avec un équipement auxiliaire, p.ex. avec pendule ou bloc-notes par des moyens de couplage non intrusifs, p.ex. coupleurs acoustiques
G01S 17/02 - Systèmes utilisant la réflexion d'ondes électromagnétiques autres que les ondes radio
G01S 17/10 - Systèmes déterminant les données relatives à la position d'une cible pour mesurer la distance uniquement utilisant la transmission d'ondes à modulation d'impulsion interrompues
G01S 7/481 - Caractéristiques de structure, p.ex. agencements d'éléments optiques
G01S 19/09 - Systèmes de positionnement par satellite à radiophares émettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système global de navigation par satellite] ou GALILEO Éléments coopérants; Interaction ou communication entre les différents éléments coopérants ou entre les éléments coopérants et les récepteurs fournissant une capacité de traitement mise en œuvre normalement par le récepteur
A method for estimating position and orientation of an image-capturing device is proposed. The method comprises the step of obtaining a preceding set of frames by using the image-capturing device. Each frame includes a set of image data. The method of the present technology further comprises the step of estimating a previous position and orientation of the image-capturing device by using the set of image data included in at least one preceding frame, and the step of estimating a current position and orientation of the image-capturing device by replacing a set of image data included in at least one preceding frame by a set of image data included in at least one subsequent frame. At least one subsequent frame is obtained by using the image-capturing device.
Novel tools and techniques for defining a search range for conjugate points in a set of images. In one technique, an intra-overlap area in two images can be used to define a search range in which a conjugate point can be found; in an aspect, this search range might be expressed as a distance range from a station at which one or both of the two images were captured. That distance range can be used to narrow the search range in an image captured from another station, substantially reducing both the computation time to identify a conjugate match and the likelihood of identifying an incorrect match.
An apparatus for providing navigational information associated with locations of objects includes an imaging device configured to acquire image data, a visual display coupled to the imaging device and configured to display the image data, a position measuring device configured to determine position information associated with the imaging device, and an orientation device configured to determine orientation information associated with the imaging device. The apparatus may also include a rendering system coupled to the visual display, the position measuring device, and the orientation device. The rendering system may be configured to determine image coordinates associated with a location of an object and provide a navigational graphic on the visual display oriented relative to the image coordinates.
G06F 3/00 - Dispositions d'entrée pour le transfert de données destinées à être traitées sous une forme maniable par le calculateur; Dispositions de sortie pour le transfert de données de l'unité de traitement à l'unité de sortie, p.ex. dispositions d'interface
A63F 13/06 - utilisant des moyens actionnés par le joueur pour commander la position d'une zone spécifique sur l'affichage
G01C 21/20 - Instruments pour effectuer des calculs de navigation
G01C 15/00 - Instruments de géodésie ou accessoires non prévus dans les groupes
A radio frequency identification (RFID) tag distance measuring system and method is disclosed. One example includes a first replica path that receives a signal that is simultaneously transmitted to an RFID tag. The first replica path includes a plurality of taps at known distances along the first replica path. Each of the plurality of taps has a first tap input coupled with the first replica path. In addition, an RFID signal receiver receives a return signal from the RFID tag and provides the return signal along a measurement input, wherein each of the plurality of taps have a second tap input coupled with the measurement path. A distance determiner detects at least the first of the plurality of taps to have an output and determine a distance measurement to the RFID tag based thereon.
H04Q 5/22 - Dispositifs de sélection dans lesquels plusieurs postes d’abonnés sont connectés par la même ligne au central avec connexion indirecte, c. à d. à travers un centre de commutation subordonné le centre subordonné ne permettant pas une interconnexion d'abonnés reliés à ce centre
G08B 13/14 - Déclenchement mécanique par l'enlèvement ou les essais de déplacement d'articles portatifs
G01S 13/08 - Systèmes pour mesurer la distance uniquement
G01S 3/02 - Radiogoniomètres pour déterminer la direction d'où proviennent des ondes infrasonores, sonores, ultrasonores ou électromagnétiques ou des émissions de particules sans caractéristiques de direction utilisant des ondes radio
G01P 11/00 - Mesure de la valeur moyenne de la vitesse
G01R 25/00 - Dispositions pour procéder aux mesures de l'angle de phase entre une tension et un courant ou entre des tensions ou des courants
G01R 29/02 - Mesure des caractéristiques d'impulsions individuelles, p.ex. de la pente de l'impulsion, du temps de montée ou de la durée
G01S 13/74 - Systèmes utilisant la reradiation d'ondes radio, p.ex. du type radar secondaire; Systèmes analogues
G06K 7/00 - Méthodes ou dispositions pour la lecture de supports d'enregistrement
G01S 5/14 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant les ondes radioélectriques déterminant des distances absolues à partir de plusieurs points espacés d'emplacement connu
G01S 5/30 - Détermination de distances absolues à partir de plusieurs points espacés d'emplacement connu
G01S 13/78 - Systèmes utilisant la reradiation d'ondes radio, p.ex. du type radar secondaire; Systèmes analogues dans lesquels des signaux de type pulsé sont transmis effectuant la discrimination entre différents types de cibles, p.ex. radar pour l'identification ami–ennemi
Layout equipment for locating a plurality of positions at a construction site is provided. The layout equipment includes a laser target rod, a self-leveling laser transmitter, and a remote control device. The rod has an elongated rod body including retroreflective material extending substantially the entire length of the body. The laser transmitter projects a beam of laser light, and receives laser light reflected from the rod. The laser transmitter includes a first wireless communication unit, and a transmitter control. The transmitter control is responsive to the first wireless communication unit. The remote control device includes a second wireless communication unit that communicates wirelessly with to the laser transmitter to cause the laser transmitter to project the beam of laser light toward a position at the construction site, and signals the user of the layout equipment when the rod has been placed at the position.
G01C 5/02 - Mesure des hauteurs; Mesure des distances transversales par rapport à la ligne de visée; Nivellement entre des points séparés; Niveaux à lunette impliquant une stabilisation automatique de la ligne de visée
A method of milling asphalt is disclosed. The result of a survey of the unmilled asphalt pavement surface adjacent to the area to be milled is received. The result of the survey is stored in a computer memory. A map of the design surface specifying the design elevation of the milled surface over the area to be milled is stored in the computer memory. The relative elevation of the unmilled asphalt pavement surface adjacent to the area to be milled with respect to the machine body and rotatable milling drum of an asphalt milling machine is sensed. The elevation of the bottom surface of the rotatable milling drum is determined using a computer processor. The elevation of the milling machine body and the rotatable milling drum is automatically adjusted such that the milling drum mills the asphalt surface to the design elevation over the area to be milled.
E01C 23/07 - Appareils combinant la mesure de la configuration superficielle du revêtement avec l'application de matériau proportionnellement aux irrégularités mesurées
E01C 23/08 - Dispositifs ou aménagements pour travailler la surface terminée; Dispositifs pour réparer la surface des revêtements endommagés pour égaliser en supprimant les parties saillantes ou pour retirer des matériaux liaisonnés sur la surface, p.ex. des marques
G06F 7/70 - Méthodes ou dispositions pour effectuer des calculs en utilisant une représentation numérique non codée, c. à d. une représentation de nombres sans base; Dispositifs de calcul utilisant une combinaison de représentations de nombres codées et non codées utilisant des trains d'impulsions stochastiques, c. à d. des impulsions apparaissant au hasard et dont la moyenne des taux d'impulsion représente des nombres
E21C 25/00 - Machines à inciser, c. à d. pratiquant des saignées approximativement parallèles ou perpendiculaires à la veine
E01C 23/085 - Dispositifs ou aménagements pour travailler la surface terminée; Dispositifs pour réparer la surface des revêtements endommagés pour égaliser en supprimant les parties saillantes ou pour retirer des matériaux liaisonnés sur la surface, p.ex. des marques utilisant des outils propulsés, p.ex. des outils vibrants
49.
Method of determining the orientation of a machine
A method of determining the orientation of a robotic machine at a worksite contemplates providing a target on the machine, moving the target to a first position on said machine, determining the location of the first position in the worksite, moving the target to a second position on said machine, and determining location of the second position in the worksite. The first and second positions are known with respect to the machine. Finally, a vector between the first and second locations defines the orientation of the machine with respect to the worksite. The target may be moved to additional positions on the machine.
G01S 5/00 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance
B25H 7/00 - Marquage ou traçage des pièces à travailler
G01C 15/00 - Instruments de géodésie ou accessoires non prévus dans les groupes
G01S 5/16 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant des ondes électromagnétiques autres que les ondes radio
G05D 1/02 - Commande de la position ou du cap par référence à un système à deux dimensions
A method of projecting an image onto a viewing surface uses scanning projector, such as a laser-beam-steering pico projector, which scans a laser beam across the viewing surface. Each pixel area on the viewing surface which is included within images defined by a high intensity display digital video data, and each pixel area on the viewing surface which is included within images defined by a low intensity display digital video data are scanned. The projector beam illuminates each pixel area on the viewing surface which is included within images defined by the high intensity display digital video data for a greater period of time than is spent illuminating each pixel area on the viewing surface which is included within images defined by other digital video data.
A system for projecting an image, including layout information, on a surface in a building under construction has a projector mounted on a moveable support for supporting a worker at a work position in the building. The projector projects an image on a surface above the moveable support in response to an image signal defining the image to be projected. The image indicates the location of connectors, anchors, and holes to be affixed to, or cut through, the surface. A system determines the two dimensional position of the projector in the building, and a distance measuring system for determines the distance from the projector to said surface. A processor, responsive to a memory having stored building plan images, provides an image signal to the projector adjusted for the two dimensional location of the projector and for the distance from the projector to the surface.
G03B 21/14 - Projecteurs ou visionneuses du type par projection; Leurs accessoires - Détails
G01B 11/14 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la distance ou la marge entre des objets ou des ouvertures espacés
B25H 7/00 - Marquage ou traçage des pièces à travailler
G01C 15/02 - Moyens pour marquer les points de mesure
G03B 21/00 - Projecteurs ou visionneuses du type par projection; Leurs accessoires
G01S 17/87 - Combinaisons de systèmes utilisant des ondes électromagnétiques autres que les ondes radio
G01S 5/16 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant des ondes électromagnétiques autres que les ondes radio
G03B 17/54 - APPAREILS OU DISPOSITIONS POUR PRENDRE DES PHOTOGRAPHIES, POUR LES PROJETER OU LES VISIONNER; APPAREILS OU DISPOSITIONS UTILISANT DES TECHNIQUES ANALOGUES UTILISANT D'AUTRES ONDES QUE DES ONDES OPTIQUES; LEURS ACCESSOIRES - Parties constitutives des appareils ou corps d'appareils; Leurs accessoires prévus pour être combinés à d'autres appareils photographiques ou optiques avec projecteur
G03B 21/53 - Systèmes de mise au point automatique, p.ex. pour compenser les effets thermiques
Methods and systems are disclosed for calibrating a crane for crane geometry. A Global Navigation Satellite System (GNSS) receiver antenna is disposed on a point along a boom assembly of the crane, the crane configured to pivot about a pivot point. A working arm of the crane is rotated about the pivot point to at least three different positions. Three locations are determined in a geo-referenced coordinate system of the at least three different positions. A location of the pivot point is determined based on the three locations.
G06F 19/00 - Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des applications spécifiques (spécialement adaptés à des fonctions spécifiques G06F 17/00;systèmes ou méthodes de traitement de données spécialement adaptés à des fins administratives, commerciales, financières, de gestion, de surveillance ou de prévision G06Q;informatique médicale G16H)
A method of establishing the location of a pair construction points for a stud in a building interior at a construction site and for determining the length of the stud needed to extend between the pair of construction points uses a robotic total station. The points are defined by x and y coordinates and anticipated z coordinates on upper and lower surfaces. The robotic total station establishes the points by directing a beam of laser light toward anticipated points and, through an iterative process, determining the actual location of the points on upper and lower surfaces that have the same x and y coordinates.
Novel tools and techniques are described for identifying objects and/or persons. In one aspect, a method might comprise obtaining a digital image of an object(s) with a digital image recording device. The digital image may be transmitted to a remote computer system, and compared to multiple preexisting digital images using an image comparison software application running thereon. A set of preexisting digital images matching the digital image of the object(s) may be identified, and a (best match) keyphrase associated with the preexisting digital images may be determined. The keyphrase may be returned to a user computer for user confirmation or rejection. In some embodiments, a point cloud may be generated for each object in the image, and fitted with available 3D models, so as to confirm the keyphrase. In some embodiments, the confirmed keyphrase may be sent to a user computer for implementation in a cadastral survey application.
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
G06K 9/62 - Méthodes ou dispositions pour la reconnaissance utilisant des moyens électroniques
A method is disclosed for controlling operational parameters of a wireless reader device and/or one or more other devices based on proximity of the wireless reader device to a wireless electronic circuit. At a first location, the wireless reader device and/or the one or more other devices are controlled based on a first operational parameter. At a second location, interrogation signals are transmitted from the wireless reader device, and response signals are received at the wireless reader device. The response signals are transmitted from the wireless electronic circuit in response to receiving the interrogation signals from the wireless reader device. The response signals convey a control parameter to the wireless reader device that is associated with a second operational parameter. Thereafter, the wireless reader device and/or the one or more other devices are controlled based on the second operational parameter.
H04Q 5/22 - Dispositifs de sélection dans lesquels plusieurs postes d’abonnés sont connectés par la même ligne au central avec connexion indirecte, c. à d. à travers un centre de commutation subordonné le centre subordonné ne permettant pas une interconnexion d'abonnés reliés à ce centre
G08B 13/14 - Déclenchement mécanique par l'enlèvement ou les essais de déplacement d'articles portatifs
G08C 19/12 - Systèmes de transmission de signaux électriques dans lesquels le signal transmis est la fréquence ou la phase d'un courant alternatif
G08B 5/22 - Systèmes de signalisation optique, p.ex. systèmes d'appel de personnes, indication à distance de l'occupation de sièges utilisant une transmission électromécanique
A moisture sensing water system comprising at least one moisture sensor coupled with at least one wheel coupled with a water conveyance system, the at least one moisture sensor pierces the ground during each rotation of the at least one wheel and performs a moisture sensing. A moisture information converter receives the moisture sensing information and converts the moisture sensing information into a signal indicative of the moisture content of the ground. A moisture content provider provides the signal indicative of the moisture content of the ground in a user accessible format to automatically control the amount of water disseminated by the moisture sensing watering system.
H04W 24/00 - Dispositions de supervision, de contrôle ou de test
G01S 5/02 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant les ondes radioélectriques
G01S 1/68 - Marqueur, balise d'extrémité, indicatif d'appel ou toutes balises analogues transmettant des signaux ne portant pas d'information directionnelle
A radio frequency identification (RFID) tower crane load locator is disclosed. One example includes at least four RFID components to provide RFID range measurements between the at least four RFID components. In addition, a load position determiner utilizes the RFID range measurements to determine a location of the load. A load information generator provides the location of the load information suitable for subsequent access by a user.
G06F 7/00 - Procédés ou dispositions pour le traitement de données en agissant sur l'ordre ou le contenu des données maniées
B66C 13/16 - Utilisation de dispositifs indicateurs de positionnement ou de pesée
B66C 13/46 - Indicateurs de position pour charges suspendues ou pour éléments de grues
B66C 23/28 - Installations comportant essentiellement un palonnier, une flèche ou une structure triangulaire agissant comme bras de levier, montées de façon à permettre des mouvements de translation ou d'orientation dans des plans verticaux ou horizontaux, ou bie spécialement adaptées pour être utilisées dans des emplacements particuliers ou à des usages particuliers faites, p.ex. de pièces détachées, pour permettre un assemblage ou démontage rapides, pour travailler à des niveaux de plus en plus élevés, pour être transportées par route ou par rail faites pour travailler à des niveaux de plus en plus élevés
G01S 19/46 - Détermination de position en combinant les mesures des signaux provenant du système de positionnement satellitaire à radiophares avec une mesure supplémentaire la mesure supplémentaire étant du type signal d'onde radioélectrique
A radio frequency identification (RFID) tower crane load locator and sway indicator is disclosed and includes: a plurality of RFID tags at different locations on or around the tower crane; at least two RFID readers at different locations on the tower crane; a navigation satellite system (NSS) position receiver; and a load information interface. The RFID readers comprising a range determiner to provide range measurements between each of the RFID readers and each of the plurality of RFID tags. The sway determiner is coupled with a hook block of the tower crane. The NSS position receiver is coupled with the tower crane. The load information interface to combine information from range measurements, the sway determiner and the NSS position receiver to generate location and sway information of the load with respect to the tower crane and provide the location and sway information in a user accessible format.
B66C 13/16 - Utilisation de dispositifs indicateurs de positionnement ou de pesée
B66C 13/46 - Indicateurs de position pour charges suspendues ou pour éléments de grues
B66C 23/28 - Installations comportant essentiellement un palonnier, une flèche ou une structure triangulaire agissant comme bras de levier, montées de façon à permettre des mouvements de translation ou d'orientation dans des plans verticaux ou horizontaux, ou bie spécialement adaptées pour être utilisées dans des emplacements particuliers ou à des usages particuliers faites, p.ex. de pièces détachées, pour permettre un assemblage ou démontage rapides, pour travailler à des niveaux de plus en plus élevés, pour être transportées par route ou par rail faites pour travailler à des niveaux de plus en plus élevés
G01S 19/46 - Détermination de position en combinant les mesures des signaux provenant du système de positionnement satellitaire à radiophares avec une mesure supplémentaire la mesure supplémentaire étant du type signal d'onde radioélectrique
A01D 45/10 - Récolte d’espèces sur pied de la canne à sucre
G01F 1/30 - Mesure du débit volumétrique ou du débit massique d'un fluide ou d'un matériau solide fluent, dans laquelle le fluide passe à travers un compteur par un écoulement continu en utilisant des effets mécaniques par détection des effets dynamiques de l’écoulement par débitmètre à force d'entraînement, p.ex. du type à palette ou à poussée pour matériau solide fluent
A system for managing kinematic assets is disclosed. In one embodiment, the system comprises an electronic identification device associated with an asset. The system further comprises a container comprising a reader disposed within the container for receiving a unique identification of the identification device. The container further comprises a reader node for maintaining an inventory record comprising the asset and for generating a report when the asset is not detected by said reader. The report further comprises a location of the container when said report is generated. The system further comprises a kinematic asset management platform comprising an asset registry for storing data conveyed by the report and a reports engine for generating a second report conveying the location of said container when the report is generated.
A low noise amplifier (LNA) assembly comprising a filter circuit for receiving signals from a Mobile Satellite Service (MSS) band and a Radio Navigation Satellite Service (RNSS) band; and an alternative filter circuit configured to filter out a jammer signal.
G01S 19/36 - Récepteurs - Détails de construction ou détails de matériel ou de logiciel de la chaîne de traitement des signaux concernant l'étage d'entrée du récepteur
H04B 1/18 - Circuits d'entrée, p.ex. pour le couplage à une antenne ou à une ligne de transmission
H04B 1/10 - Dispositifs associés au récepteur pour limiter ou supprimer le bruit et les interférences
65.
Method and apparatus for detecting interference in design environment
The disclosure provides a solution for clash detection in three-dimensional design by allowing multiple members to work on a centrally-located version of the model. The disclosure also provides massively-parallel processing of the design file which enables rapid processing and version control. The model can be maintained at one or more remote servers with significantly higher processing capability. Implementing clash detection on the remote server allows the system to take advantage of parallel processing. Complex 3D models can be identified and divided across multiple computational units to significantly increase processing speed.
A method of determining a tilt angle and a tilt direction of a survey instrument. The survey instrument has an imaging device that captures first images at a first location. The first images include features from an environment around the survey instrument. The imaging device also captures second images at a second location. The second images include a portion of the features. A pose of the imaging device is determined at the second location using observed changes in location of a common portion of the features between the first images and the second images. The tilt angle and the tilt direction of the survey instrument at the second location are determined using the pose of the imaging device.
G01S 19/48 - Détermination de position en combinant ou en commutant entre les solutions de position dérivées du système de positionnement par satellite à radiophares et les solutions de position dérivées d'un autre système
G01S 1/72 - Radiophares ou systèmes de balisage émettant des signaux ayant une ou des caractéristiques pouvant être détectées par des récepteurs non directionnels et définissant des directions, situations ou lignes de position déterminées par rapport aux émetteu; Récepteurs travaillant avec ces systèmes utilisant des ondes ultrasonores, sonores ou infrasonores
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
A method includes acquiring imaging data of a scene using an imaging tool. The method also includes processing the imaging data to create a three-dimensional representation of the scene and extracting radio frequency identification (RFID) data stored in an RFID tag. The method further includes using the RFID data for placing an object in the scene that is not yet part of the scene.
G06F 17/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des fonctions spécifiques
G06F 17/30 - Recherche documentaire; Structures de bases de données à cet effet
G01C 15/00 - Instruments de géodésie ou accessoires non prévus dans les groupes
H04N 1/00 - Balayage, transmission ou reproduction de documents ou similaires, p.ex. transmission de fac-similés; Leurs détails
H04N 1/32 - Circuits ou dispositions pour la commande ou le contrôle entre l'émetteur et le récepteur
G01C 11/02 - Dispositions de prises de vues spécialement adaptées pour la photogrammétrie ou les levers photographiques, p.ex. pour commander le recouvrement des photos
In a method for asset management, a transmission of information is received from a first reporting source about an asset and a transmission of information from is received from a second reporting source about the asset. The second reporting source uses a different means of transmission than the first reporting source. A database is populated with the information from the first reporting source and the information from the second reporting source such that information from the first reporting source and information from the second reporting source can be collected from the database. A computer system, accessing the database, generates an asset information report comprising at least a portion of information from the first reporting source and at least a portion of information from the second reporting source.
A mobile construction device sensor unit comprises a point-to-point radio ranging system and a position determining component. The point-to-point radio ranging system is configured to couple with a mobile construction device. The position determining component is coupled with the point-to-point radio ranging system and is configured for determining a position of the sensor unit in at least two dimensions based on communications between the point-to-point radio ranging system and a plurality of tags respectively located at a plurality of knowable locations within an operating environment of the mobile construction device.
G01C 21/00 - Navigation; Instruments de navigation non prévus dans les groupes
G01S 13/02 - Systèmes utilisant la réflexion d'ondes radio, p.ex. systèmes du type radar primaire; Systèmes analogues
B66C 13/16 - Utilisation de dispositifs indicateurs de positionnement ou de pesée
G06F 19/00 - Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des applications spécifiques (spécialement adaptés à des fonctions spécifiques G06F 17/00;systèmes ou méthodes de traitement de données spécialement adaptés à des fins administratives, commerciales, financières, de gestion, de surveillance ou de prévision G06Q;informatique médicale G16H)
B66C 15/04 - Mécanismes de sécurité pour empêcher les collisions, p.ex. entre les grues ou les chariots à treuil travaillant sur la même voie
B66C 13/40 - Utilisation de dispositifs pour transmettre des impulsions de commande; Utilisation de dispositifs de commande à distance
An improved method for asset management is described. The method includes receiving information from a remote reporting device in close proximity to an asset, the information including a first unique identifier associated with the asset and a second unique identifier associated with a user of the asset. The method further includes associating the asset with the user based on the information. Additionally, the method includes monitoring use of the asset and maintaining a record of the use by the user based on the information.
G07C 5/00 - Enregistrement ou indication du fonctionnement de véhicules
G06F 17/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des fonctions spécifiques
G08G 1/00 - Systèmes de commande du trafic pour véhicules routiers
H04W 4/02 - Services utilisant des informations de localisation
H04W 4/04 - dans un environnement spécialisé, p.ex. des immeubles ou des véhicules
H04L 29/08 - Procédure de commande de la transmission, p.ex. procédure de commande du niveau de la liaison
G07C 5/08 - Enregistrement ou indication de données de marche autres que le temps de circulation, de fonctionnement, d'arrêt ou d'attente, avec ou sans enregistrement des temps de circulation, de fonctionnement, d'arrêt ou d'attente
G07C 5/02 - Enregistrement ou indication du temps de circulation, de fonctionnement, d'arrêt ou d'attente uniquement
A method of measuring an angle includes orienting a measurement device at a reference position characterized by a reference angle. A first panoramic image defined by a predetermined range of elevation angles is acquired where the first panoramic image includes an object. A first bearing of the object in relation to the reference angle is determined and the measurement device is rotated to a measurement position characterized by a measurement angle. A second panoramic image defined by the predetermined range of elevation angles is acquired where the second panoramic image includes the object. A second bearing of the object in relation to the reference angle is determined. The measurement angle is computed as a function of the first bearing and the second bearing.
Ground-based measurements of agricultural metrics such as NDVI are used to calibrate wide-area aerial measurements of the same metrics. Calibrated wide-area data may then be used as an input to a field prescription processor.
In some embodiments, a crop feeler system automatically executes a navigational task based on a proximity of a vehicle to an obstacle. The crop feeler system includes a hub attached to the vehicle. Inside the hub are two oscillating circuits each having an oscillating frequency. A member is coupled to the hub. Two inductive elements are positioned within the member so that, when the obstacle comes into contact with the member, at least one of the inductive elements moves closer to at least one of the oscillating circuits and alters the oscillating frequency of that oscillating circuit. A navigation sensor measures the oscillating frequency of the oscillating circuit, identifies a navigational task using the oscillating frequency of the oscillating circuit, and executes the navigational task.
G05D 1/02 - Commande de la position ou du cap par référence à un système à deux dimensions
A01B 69/04 - Adaptations particulières de la conduite automatique du tracteur, p.ex. systèmes électriques pour labourage selon les courbes de niveau
A01D 41/127 - Dispositions pour la commande ou la mesure spécialement adaptées aux moissonneuses-batteuses
B62D 6/00 - Dispositions pour la commande automatique de la direction en fonction des conditions de conduite, qui sont détectées et pour lesquelles une réaction est appliquée, p.ex. circuits de commande
G01S 13/91 - Radar ou systèmes analogues, spécialement adaptés pour des applications spécifiques pour la commande du trafic
G01S 13/93 - Radar ou systèmes analogues, spécialement adaptés pour des applications spécifiques pour prévenir les collisions
An example method for providing a user with service technical data is provided. A server stores original service technical data and annotated data in a server where the annotated data is associated with the original service technical data. The server determines an access level of the user such where the access level of the user determines what service technical data may be sent. A portion of the service technical data is sent from the server to a device associated with the user, based at least in part on the access level of the user. The server also receives additional annotated data generated by the user where the additional annotated data is associated with the original service technical data.
G06F 15/16 - Associations de plusieurs calculateurs numériques comportant chacun au moins une unité arithmétique, une unité programme et un registre, p.ex. pour le traitement simultané de plusieurs programmes
A method of lifting device collision avoidance is disclosed. In one embodiment, the method comprises determining a three dimensional position of a collision avoidance sensor unit coupled with a load line of a first lifting device, the determining performed by a first global navigation satellite system (GNSS) receiver coupled with a housing of the collision avoidance sensor unit, generating a geofence for the first lifting device based at least in part on the collision avoidance sensor unit position, monitoring for a collision related hazard indicated by encroachment between the first geofence and a second geofence associated with a second lifting device and initiating at least one collision hazard avoidance action in response to a monitored occurrence of the collision related hazard.
A method of lifting device load hazard avoidance is disclosed. In one embodiment, the method comprises determining a three dimensional position of a load hazard avoidance sensor unit coupled with a load line of a lifting device, the determining performed by a first global navigation satellite system (GNSS) receiver coupled with a housing of the load hazard avoidance sensor unit, monitoring for a load related hazard in a vicinity of a load coupled with the load line, the monitoring performed by a load monitor coupled with the housing and initiating at least one load related hazard avoidance action in response to a monitored occurrence of the load related hazard.
A hook block sensor assembly is disclosed. In one embodiment, the hook block sensor comprises a housing configured to removably couple about a lifting hook of a lifting device, a first global navigation satellite system (GNSS) receiver coupled with the housing and configured for determining a hook block sensor assembly position in three dimensions, a load monitor coupled with the housing and configured for monitoring a load coupled with the lifting hook, including monitoring a load position and a load orientation of the load and a wireless transceiver coupled with the housing and configured for wirelessly providing information including the load position, the load orientation, and the hook block sensor assembly position, to a display unit located apart from the hook block sensor assembly.
A lifting device sensor unit comprises a housing, a first global navigation satellite system (GNSS) receiver, and a wireless transceiver. The housing is configured to removably couple about a load line of a lifting device. The first GNSS receiver is coupled with the housing and configured for determining a sensor unit position in three dimensions. The wireless transceiver is coupled with the housing and configured for wirelessly providing information including the sensor unit position to a display unit located apart from the sensor unit.
A lifting device sensor unit comprising a housing, a load monitor, and a wireless transceiver. The housing is configured to removably couple about a load line of a lifting device. The load monitor is coupled with the housing and configured for monitoring a load coupled with the load line, including monitoring a load position and a load orientation of the load. The wireless is transceiver coupled with the housing and configured for wirelessly providing information including the load position and the load orientation to a display unit located apart from the sensor unit.
In embodiments, an application vehicle includes an application system for applying a product during an agricultural application. The application system (used in conjunction with the application vehicle) includes a priming module that determines a priming location. When the application vehicle is in proximity to the priming location, the priming module primes aspects of the application system so that it is ready to apply the product when the application vehicle reaches a region in which the product is to be applied.
B05B 17/04 - Appareils de pulvérisation ou d'atomisation de liquides ou d'autres matériaux fluides, non couverts par les autres groupes de la présente sous-classe opérant suivant des procédés particuliers
A01M 7/00 - Adaptations ou aménagements particuliers des appareils de pulvérisation de liquides aux fins couvertes dans la présente sous-classe
A01C 23/00 - Dispositifs distributeurs spécialement adaptés pour répandre le purin ou d'autres engrais liquides, y compris l'ammoniaque, p.ex. réservoirs de transport ou voitures arroseuses
A boom is attached to an application vehicle for applying a product during an agricultural application. The boom includes one or more sections that can be dynamically adjusted to satisfy one or more adjustment criteria. A boom controller communicates actuation commands to a boom adjustment system to dynamically adjust the shape of the boom.
A method of communicating corrections for information related to satellite signals among global navigation satellite system (GNSS) receivers is described. The method includes at a first GNSS device determining a component of position of a satellite. The component is then divided by a first value to thereby obtain an integer value and a remainder value, and the only the remainder value is transmitted from the first GNSS device to the second GNSS device. Knowing the first value, the second GNSS device calculates the component of position.
G01S 19/04 - Systèmes de positionnement par satellite à radiophares émettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système global de navigation par satellite] ou GALILEO Éléments coopérants; Interaction ou communication entre les différents éléments coopérants ou entre les éléments coopérants et les récepteurs fournissant des données relatives à la phase de la porteuse
G01S 19/03 - Systèmes de positionnement par satellite à radiophares émettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système global de navigation par satellite] ou GALILEO Éléments coopérants; Interaction ou communication entre les différents éléments coopérants ou entre les éléments coopérants et les récepteurs
G01S 19/05 - Systèmes de positionnement par satellite à radiophares émettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système global de navigation par satellite] ou GALILEO Éléments coopérants; Interaction ou communication entre les différents éléments coopérants ou entre les éléments coopérants et les récepteurs fournissant des données d'assistance
G01S 19/07 - Systèmes de positionnement par satellite à radiophares émettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système global de navigation par satellite] ou GALILEO Éléments coopérants; Interaction ou communication entre les différents éléments coopérants ou entre les éléments coopérants et les récepteurs fournissant des données pour corriger les données de positionnement mesurées, p.ex. DGPS [GPS différentiel] ou corrections ionosphériques
Provided herein are systems and methods (i.e., utilities) that allow for synthesizing antenna patterns for wireless access points that provide coverage in a wireless network. The utilities utilize various mathematical models to identify antenna settings that enhance coverage of a coverage area.
A method for determining a location of a target includes, at a first location, determining first location coordinates of a measuring device using one or more GNSS signals, determining a first gravitational direction, and capturing a first image using the camera. The method also includes, at a second location, determining second location coordinates of the measuring device, and capturing a second image. The method further includes determining a plurality of correspondence points between the first and second images, determining a first plurality of image coordinates for the plurality of correspondence points in the first image, determining a second plurality of image coordinates for the plurality of correspondence points in the second image, and determining the location of the target using at least the first plurality of image coordinates, the second plurality of image coordinates, and the first gravitational direction.
G06K 9/00 - Méthodes ou dispositions pour la lecture ou la reconnaissance de caractères imprimés ou écrits ou pour la reconnaissance de formes, p.ex. d'empreintes digitales
A method for tracking an entity is disclosed. In one embodiment, a plurality of messages conveying an identification of an entity are received using a wireless identification component. A geographic location of the wireless identification component is determined by a position determining component wherein the geographic location describes a respective geographic location of the wireless identification component when each of the plurality of messages is received. A geographic position of the entity is determined based upon a known spatial relationship between the position determining component and the wireless identification component.
G08B 13/14 - Déclenchement mécanique par l'enlèvement ou les essais de déplacement d'articles portatifs
G06K 7/10 - Méthodes ou dispositions pour la lecture de supports d'enregistrement par radiation corpusculaire
G01S 5/02 - Localisation par coordination de plusieurs déterminations de direction ou de ligne de position; Localisation par coordination de plusieurs déterminations de distance utilisant les ondes radioélectriques
H04W 64/00 - Localisation d'utilisateurs ou de terminaux pour la gestion du réseau, p.ex. gestion de la mobilité
87.
Portable global navigation satellite system smart antenna
A method for reducing multipath when determining a location of a stationary or near stationary position, includes receiving a signal from an antenna moving continuously with respect to the stationary or near stationary position, the signal including a multipath component, processing the received signal including the multipath component, wherein multipath error in the received signal is reduced during the processing and determining a location of the stationary or near stationary position based on the processed received signal with the multipath error reduced.
An overvoltage protection circuit is based on replacing the bias resistor in a conventional overvoltage protection circuit with a self-biased latch. The new circuit automatically survives both overvoltage and overcurrent events.
A system and method is provided for performing an automated a site survey process for adjusting radiation patterns of access point antennas in a wireless network. The system and method utilize wireless mobile devices in their normal process of carrying about ordinary traffic to measure network performance. Further, such information is utilizes to configure the radiation patterns of the access point antennas to tailor coverage areas of the antennas to current network conditions.
A method for detecting a lane change by a moving vehicle is disclosed. In one embodiment, it is detected that a first heading of a moving vehicle has met a parameter defining a stable heading. It is then detected that a second heading of the moving vehicle has subsequently met a parameter defining an unstable heading. It is then detected that a third heading of the moving vehicle has subsequently met a parameter defining a stable heading within a pre-determined time parameter and that the third heading equals the first heading within a pre-defined margin. An indication is then generated that the moving vehicle has performed a lane change.
G05D 1/00 - Commande de la position, du cap, de l'altitude ou de l'attitude des véhicules terrestres, aquatiques, aériens ou spatiaux, p.ex. pilote automatique
G05D 3/00 - Commande de la position ou de la direction
G06F 7/00 - Procédés ou dispositions pour le traitement de données en agissant sur l'ordre ou le contenu des données maniées
G06F 17/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des fonctions spécifiques
G07C 5/00 - Enregistrement ou indication du fonctionnement de véhicules
94.
Refining a position estimate of a low earth orbiting satellite
In a method for refining a position estimate of a low earth orbiting (LEO) satellite a first position estimate of a LEO satellite is generated with a GNSS receiver on-board the LEO satellite. Corrections are received at the LEO satellite. The corrections are processed on-board the LEO satellite such that a corrected LEO satellite position estimate of the LEO satellite is generated for the first position estimate.
G01S 1/00 - Radiophares ou systèmes de balisage émettant des signaux ayant une ou des caractéristiques pouvant être détectées par des récepteurs non directionnels et définissant des directions, situations ou lignes de position déterminées par rapport aux émetteu; Récepteurs travaillant avec ces systèmes
G01S 19/07 - Systèmes de positionnement par satellite à radiophares émettant des messages horodatés, p.ex. GPS [Système de positionnement global], GLONASS [Système global de navigation par satellite] ou GALILEO Éléments coopérants; Interaction ou communication entre les différents éléments coopérants ou entre les éléments coopérants et les récepteurs fournissant des données pour corriger les données de positionnement mesurées, p.ex. DGPS [GPS différentiel] ou corrections ionosphériques
G01S 19/40 - Correction de position, de vitesse ou d'attitude
G01C 21/00 - Navigation; Instruments de navigation non prévus dans les groupes
In a method of detecting an underground object which is at least partially under a surface of ground, a first view of the object determined by transmitting a first radar signal from a first known geolocation. A second view of the object is determined by transmitting a second radar signal from a second known geolocation. The respective first and second trajectories of the first and second radar signals are oblique with respect to the surface of the ground and the respective first and second trajectories are at a first angle with respect to each other. A position of the object is estimated by maximizing a correlation between the first view and the second view by adjusting an estimated dielectric constant associated with medium between the object and the surface of the ground.
G01S 13/04 - Systèmes déterminant la présence d'une cible
G01S 13/06 - Systèmes déterminant les données relatives à la position d'une cible
G01S 13/88 - Radar ou systèmes analogues, spécialement adaptés pour des applications spécifiques
G01V 3/12 - Prospection ou détection électrique ou magnétique; Mesure des caractéristiques du champ magnétique de la terre, p.ex. de la déclinaison ou de la déviation fonctionnant par ondes électromagnétiques
96.
Fleet management system and method employing mobile device monitoring and research
Systems, apparatuses and methods for monitoring wireless communication performance. A fleet of moving vehicles equipped with communication devices communicate data call records, including a geographic location of the vehicle when the communication was attempted, to a central office. Indications of successful and unsuccessful call record communications attempts are aggregated by geographic area using the geographic location data from the vehicles. Call success rate levels for the geographic areas are determined based on the aggregated indications of successful and unsuccessful call record communication attempts. These levels may be presented on geographical maps or otherwise, and/or used for network analysis purposes.
A method of surveying may include determining a location of a surveying tool, determining a location of a position of interest, detecting an RFID tag associated with the position of interest, and decoding information stored in the RFID tag. The information stored in the RFID tag may include a reference to information stored remote from the RFID tag.
G06F 17/00 - TRAITEMENT ÉLECTRIQUE DE DONNÉES NUMÉRIQUES Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des fonctions spécifiques
A multi-modal entity tracking and display system is disclosed. In one embodiment, a tracking infrastructure comprising at least one data receiver is configured to detect a tracked entity comprising a first asset class using a first sensing technology and a second sensing technology. The at least one tracking data receiver is further configured to generate a tracking data report conveying a location of the tracked entity. A multi-modal entity tracker is configured to receive and store the tracking data report. The multi-modal entity tracker is further configured to receive and store a second tracking data report of a second tracked entity comprising a second asset class which is conveyed via the tracking infrastructure.
G08B 13/24 - Déclenchement électrique par une interférence avec la distribution d'un champ électromagnétique
G06K 7/10 - Méthodes ou dispositions pour la lecture de supports d'enregistrement par radiation corpusculaire
G06K 19/077 - Supports d'enregistrement avec des marques conductrices, des circuits imprimés ou des éléments de circuit à semi-conducteurs, p.ex. cartes d'identité ou cartes de crédit avec des puces à circuit intégré - Détails de structure, p.ex. montage de circuits dans le support
H01Q 1/22 - Supports; Moyens de montage par association structurale avec d'autres équipements ou objets
G06Q 10/06 - Ressources, gestion de tâches, des ressources humaines ou de projets; Planification d’entreprise ou d’organisation; Modélisation d’entreprise ou d’organisation
G06K 17/00 - Méthodes ou dispositions pour faire travailler en coopération des équipements couverts par plusieurs des groupes principaux , p.ex. fichiers automatiques de cartes incluant les opérations de transport et de lecture
G06Q 10/08 - Logistique, p.ex. entreposage, chargement ou distribution; Gestion d’inventaires ou de stocks
G06F 7/70 - Méthodes ou dispositions pour effectuer des calculs en utilisant une représentation numérique non codée, c. à d. une représentation de nombres sans base; Dispositifs de calcul utilisant une combinaison de représentations de nombres codées et non codées utilisant des trains d'impulsions stochastiques, c. à d. des impulsions apparaissant au hasard et dont la moyenne des taux d'impulsion représente des nombres
G06F 19/00 - Équipement ou méthodes de traitement de données ou de calcul numérique, spécialement adaptés à des applications spécifiques (spécialement adaptés à des fonctions spécifiques G06F 17/00;systèmes ou méthodes de traitement de données spécialement adaptés à des fins administratives, commerciales, financières, de gestion, de surveillance ou de prévision G06Q;informatique médicale G16H)
G06G 7/00 - Dispositifs dans lesquels l'opération de calcul est effectuée en faisant varier des grandeurs électriques ou magnétiques
G01F 17/00 - Procédés ou appareils pour la détermination de la capacité des récipients ou des cavités, ou du volume des corps solides
G01F 25/00 - Test ou étalonnage des appareils pour la mesure du volume, du débit volumétrique ou du niveau des liquides, ou des appareils pour compter par volume
100.
Object recognition and localization service using RFID
A method of creating and managing a database of meta_data sets for a plurality of objects is provided. The meta-data set is configured to characterize an object. The meta_data set for a “j”-object is selected from the group consisting of: a first item; a second item; an “i”-th item; and ID-j tag; wherein “i” and “j” being integers. The method comprises: (A) identifying a meta_data set for at least one object; (B) collecting a meta_data set for at least one object; (C) creating the database of meta_data sets for the plurality of objects; (D) storing the database of meta_data sets for the plurality of objects; and (E) accessing the database of meta_data sets for the plurality of objects.