Spectris plc

Royaume‑Uni

Retour au propriétaire

1-100 de 328 pour Spectris plc et 15 filiales Trier par
Recheche Texte
Affiner par
Type PI
        Brevet 193
        Marque 135
Juridiction
        International 129
        États-Unis 115
        Canada 59
        Europe 25
Propriétaire / Filiale
Omega Engineering, Inc. 71
Malvern Instruments Limited 60
Hottinger Baldwin Messtechnik GmbH 56
Servomex Group Limited 40
Engineering Seismology Group Canada Inc. 36
Voir plus
Date
2023 5
2022 5
2021 13
2020 5
2019 9
Voir plus
Classe IPC
G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules 19
G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité 15
G01N 15/14 - Recherche par des moyens électro-optiques 14
G01L 1/22 - Mesure des forces ou des contraintes, en général en faisant usage des cellules électrocinétiques, c. à d. des cellules contenant un liquide, dans lesquelles un potentiel électrique est produit ou modifié par l'application d'une contrainte en utilisant des jauges de contrainte à résistance 12
G01B 11/16 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la déformation dans un solide, p.ex. indicateur optique de déformation 10
Voir plus
Classe NICE
09 - Appareils et instruments scientifiques et électriques 109
42 - Services scientifiques, technologiques et industriels, recherche et conception 48
07 - Machines et machines-outils 30
16 - Papier, carton et produits en ces matières 30
11 - Appareils de contrôle de l'environnement 17
Voir plus
Statut
En Instance 16
Enregistré / En vigueur 312
  1     2     3     4        Prochaine page

1.

NON-INVASIVE MEASUREMENT AND CALCULATION SYSTEM

      
Numéro de document 03207941
Statut En instance
Date de dépôt 2022-02-16
Date de disponibilité au public 2023-08-09
Propriétaire OMEGA ENGINEERING, INC. (USA)
Inventeur(s)
  • Leibig, Kenneth
  • Annen, Matthew
  • Zhu, Ye
  • Austin, Jr., David Alan

Abrégé

A non-invasive measuring device calculates a temperature of a medium in a container or conduit. The device includes at least one first sensor disposed on an exterior surface of the container or conduit and measures a temperature (To) of the exterior surface. The measuring device also includes at least one second sensor disposed on the exterior surface and measures a heat flux (q") moving through a wall of the container or conduit. The measuring device further includes a processor operatively coupled to the first sensor and the second sensor. The processor is configured to receive the temperature (To) measurements and the heat flux (q") measurements from the first sensor and the second sensor and to calculate a temperature of the medium in the container or conduit based on input variables about the container or conduit including radius, thickness and thermal conductivity of the material of the container or conduit.

Classes IPC  ?

  • G01K 1/14 - Supports; Dispositifs de fixation; Dispositions pour le montage de thermomètres en des endroits particuliers
  • G01K 1/143 - Supports; Dispositifs de fixation; Dispositions pour le montage de thermomètres en des endroits particuliers pour la mesure de la température de surfaces
  • G01K 7/02 - Mesure de la température basée sur l'utilisation d'éléments électriques ou magnétiques directement sensibles à la chaleur utilisant des éléments thermo-électriques, p.ex. des thermocouples
  • G01K 7/42 - Circuits pour la compensation de l’inertie thermique; Circuits pour prévoir la valeur stationnaire de la température
  • G01K 13/02 - Thermomètres spécialement adaptés à des fins spécifiques pour mesurer la température de fluides en mouvement ou de matériaux granulaires capables de s'écouler
  • G01K 17/06 - Mesure d'une quantité de chaleur transportée par des milieux en écoulement, p.ex. dans les systèmes de chauffage
  • G01N 25/18 - Recherche ou analyse des matériaux par l'utilisation de moyens thermiques en recherchant la conductivité thermique

2.

COOLSHOT

      
Numéro d'application 226852300
Statut En instance
Date de dépôt 2023-07-10
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

(1) Downhole seismic data acquisition systems comprised of seismic detectors, electronic data recorders, and computer hardware and software for detecting and recording seismic activity

3.

SPECTRIS

      
Numéro d'application 018886040
Statut Enregistrée
Date de dépôt 2023-06-09
Date d'enregistrement 2023-10-04
Propriétaire Spectris Plc. (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 35 - Publicité; Affaires commerciales
  • 37 - Services de construction; extraction minière; installation et réparation
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Software platform for use in asset optimisation and business optimisation; measuring, detecting and monitoring instruments, indicators and controllers; electronic control systems; checking (supervision) apparatus and instruments; computer software platform for use in the monitoring, control or process and workflow optimisation of industrial and manufacturing processes, industrial automation, machine diagnostics and optimisation and the operational management of industrial and manufacturing processes; electronic display interfaces for process management; information technology and audio-visual, multimedia and photographic devices; data storage devices; data or information processing apparatus; electric control panels and consoles; control installations (electric) for remote monitoring, control or optimisation of industrial processes; electrical and electronic installations for the (remote) control of automated industrial processes including electronic displays, audible and optical alarm devices, control panels, consoles, cables; simulation software; simulators for simulating the operation of vehicles for locomotion by land, air, water or rail; integrated driver assistance systems for land vehicles; simulators for driving or control of vehicles; accelerometers; computer software for collecting and distributing data within computer networks, including the internet, and enabling data communication among application programs and industrial devices; computer software for information management, data collection and data analysis; electro-dynamic devices for remote control of signals; semiconductors; converters; electronic control instruments for creating, finding, recording, amplifying, repeating, transmitting and displaying images and signal sets; telecommunication devices; position related signalling devices; downloadable cloud computer software for information technologies; interactive touch screen terminals; human machine interface for the purpose of industrial process monitoring; computer software platforms, recorded or downloadable; electrical appliances, apparatus, sensors, instruments and programmes and parts thereof and fittings therefor including micro-electronic components for said appliances, apparatus and instruments; all for use in measuring, regulating, weighing, control, monitoring and signalling technology; software; laboratory instruments [other than for medical use]; data collection apparatus; monitoring, weighing, test and measurement software; gas analysers; gasometers [measuring instruments]; air analysis apparatus; aerometers; scanners and decoders; testing and quality control devices; process controlling software; process control apparatus; process control instruments; material testing instruments and machines; material testing apparatus; rheometers; viscometers; diffractometers; imaging apparatus; particle sensors; particle counters; particle detecting apparatus; particle classifying apparatus; spectrometers; spectrometry apparatus; X-ray apparatus for industrial purposes; X-ray analysers [other than for medical use]; apparatus and installations for the production of X-rays, not for medical purposes; spectroscopes; X-ray spectroscopy apparatus [other than for medical use]; X-ray tubes not for medical purposes; vibration detectors; vibration sensors; instruments for measuring vibration; vibration exciters; transducers; transducer apparatus; testing apparatus for electronic equipment; portable test apparatus; load cells; gauges; strain gauges; X-ray gauges; ultrasonic thickness gauges; ultrasonic sensors; ultrasonic measuring apparatus; signal conditioners; amplifiers; weight measuring instruments; weighing apparatus and instruments; electronic weighing scales; calibration devices; graduation checkers [calibration checkers]; seismic detectors; safety monitoring apparatus [electric]; transmitters; telecommunication transmitters, apparatus and equipment; telecommunication networks; real-time data processing apparatus; lasers; laser measuring systems; lasers for industrial use; apparatus for analysing gases; bar code scanners; bar code readers; bar code decoders; thermocouples; temperature measuring instruments; temperature controllers; instruments for temperature control; temperature controlling apparatus; resistance temperature detectors; thermistors; humidity measuring apparatus; humidity meters; humidity sensors; infrared detectors; infrared detection apparatus; infrared thermometers; infrared scanners; infrared sensors; electric control devices for heating management; pressure sensors; force sensors; instruments for measuring pressure; torque measuring apparatus; flow measuring apparatus; level measuring instruments and apparatus; water quality measuring instruments and apparatus; data loggers and recorders; USB [universal serial bus] operating software; programmable logic controllers; man-machine interfaces; motion and motor controls; sensor switches; data switches; switches, electric; switching apparatus (Electric -); panel meters; digital panel meters; light emitting diode (led) displays and liquid crystal displays (lcd) for the purposes of industrial process monitoring; computer software relating to the aforesaid; downloadable publications relating to the aforesaid; parts and fittings for all the aforesaid; none of the foregoing for use in collecting, analysing or managing client/customer records or for use in relation to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events. Business consultancy; market analysis; business data analysis; business strategy advice and consultancy; collection of data; data processing; data processing services; computerised data processing; data management services; head office services; office functions services; business office services; company office secretarial services; office administration services [for others]; office management services [for others]; none of the foregoing services relating to the collection, analysis or management of client customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events. Installation of data processing equipment; installation, maintenance and repair of machines and machine tools for use with scientific, industrial, laboratory, optical, weighing and measuring apparatus and instruments, machines and machine tools for the treatment of materials, machines and machine tools for sample preparation, moving and handling equipment. Platform as a service (PAAS); software as a service (SaaS); monitoring of network systems; computer system monitoring services; services for monitoring industrial processes; process monitoring for quality assurance; industrial and technological engineering analysis; creating programmes for data processing; engineering services; engineering services for the analysis of structures; testing, authentication and quality control; quality testing; quality control; quality control testing; quality control services; quality audits; quality assurance consultancy; providing quality assurance services; assessing chemical information in relation to risks; environmental monitoring services; design of computer software; software development in the framework of software publishing; analysis of materials; materials testing and analysing; chemical analysis; chemical analysis services; sound and vibration measurement; testing of apparatus; testing of computing equipment; calibration services; measurement services; laboratory testing services; technical testing services; creation, maintenance and adaptation and repair of software; rental of software and data processing equipment; installation of software; engineering consultancy; engineering consultancy relating to manufacture; technological services relating to manufacture; development of computer software application solutions; development of software solutions for internet users; computerisation services, computer programming, as well as consultancy in the field of computerisation, computer programming and automatic data; updating and adapting of computer programs; gas analysing services; engineering project management services; environmental consultancy services; environmental testing of vibration; consultancy, information and advice related to the aforesaid; scientific, technical and industrial research; certification [quality control]; monitoring services; sampling for contamination; creation, maintenance, adaptation and repair of software; rental and installation of software; compilation of environmental information; development of computer programs for simulating the operation of vehicles for locomotion by land, air, water or rail, engineering services for the development and simulation of mechanical systems in the automotive, motorsport, motorcycle, aircraft, and rail industries; programming and design of electronic control systems; research, design, maintenance, development and updating of simulation software; none of the foregoing services relating to the collection, analysis or management of client customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events.

4.

ELECTROMAGNETIC CONTROL OF ABSORPTION AND SUPPRESSION OF SPECTRAL ARTIFACTS

      
Numéro d'application 17934300
Statut En instance
Date de dépôt 2022-09-22
Date de la première publication 2023-03-30
Propriétaire Servomex Group Limited (Royaume‑Uni)
Inventeur(s)
  • Lawson, Michael
  • Lopez, Martin
  • Alizadeh, Bahram

Abrégé

A method and system for the suppression and/or modulation of absorption spectrum artifacts for the purpose of gas detection and concentration measurements using at least one magnetic, electric or electromagnetic field. A field applied selectively to at least one section of the system modulates absorption by influencing quantum energy state transitions of gas species.

Classes IPC  ?

  • G01N 21/25 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes
  • G01N 21/31 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique
  • G01N 21/3504 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique en utilisant la lumière infrarouge pour l'analyse des gaz, p.ex. analyse de mélanges de gaz

5.

COOLSHOT

      
Numéro de série 97806753
Statut En instance
Date de dépôt 2023-02-22
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

Downhole seismic data acquisition systems comprised of seismic detectors, electronic data recorders, computer hardware and recorded software for detecting and recording seismic activity

6.

FUSION ARRAY

      
Numéro d'application 222058700
Statut En instance
Date de dépôt 2022-11-07
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Custom design of geophysical instrumentation and related software; collection and recording of passive seismic data; collection and recording of microseismic activity and strain data associated with subsurface operations; geophysical analysis and interpretation of seismic data

7.

SPECTRIS DYNAMICS

      
Numéro d'application 018778522
Statut Enregistrée
Date de dépôt 2022-10-18
Date d'enregistrement 2023-03-07
Propriétaire Spectris Plc. (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 35 - Publicité; Affaires commerciales
  • 37 - Services de construction; extraction minière; installation et réparation
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Software platform for use in asset optimisation and business optimisation; measuring, detecting and monitoring instruments, indicators and controllers; electronic control systems; checking (supervision) apparatus and instruments; computer software platform for use in the monitoring, control or process and workflow optimisation of industrial and manufacturing processes, industrial automation, machine diagnostics and optimisation and the operational management of industrial and manufacturing processes; electronic display interfaces for process management; information technology and audio-visual, multimedia and photographic devices; data storage devices; data or information processing apparatus; electric control panels and consoles; control installations (electric) for remote monitoring, control or optimisation of industrial processes; electrical and electronic installations for the (remote) control of automated industrial processes including electronic displays, audible and optical alarm devices, control panels, consoles, cables; simulation software; simulators for simulating the operation of vehicles for locomotion by land, air, water or rail; integrated driver assistance systems for land vehicles; simulators for driving or control of vehicles; accelerometers; computer software for collecting and distributing data within computer networks, including the internet, and enabling data communication among application programs and industrial devices; computer software for information management, data collection and data analysis; electro-dynamic devices for remote control of signals; semiconductors; converters; electronic control instruments for creating, finding, recording, amplifying, repeating, transmitting and displaying images and signal sets; telecommunication devices; position related signalling devices; downloadable cloud computer software for information technologies; interactive touch screen terminals; human machine interface for the purpose of industrial process monitoring; computer software platforms, recorded or downloadable; electrical appliances, apparatus, sensors, instruments and programmes and parts thereof and fittings therefor including micro-electronic components for said appliances, apparatus and instruments; all for use in measuring, regulating, weighing, control, monitoring and signalling technology; software; laboratory instruments [other than for medical use]; data collection apparatus; monitoring, weighing, test and measurement software; gas analysers; gasometers [measuring instruments]; air analysis apparatus; aerometers; scanners and decoders; testing and quality control devices; process controlling software; process control apparatus; process control instruments; material testing instruments and machines; material testing apparatus; rheometers; viscometers; diffractometers; imaging apparatus; particle sensors; particle counters; particle detecting apparatus; particle classifying apparatus; spectrometers; spectrometry apparatus; X-ray apparatus for industrial purposes; X-ray analysers [other than for medical use]; apparatus and installations for the production of X-rays, not for medical purposes; spectroscopes; X-ray spectroscopy apparatus [other than for medical use]; X-ray tubes not for medical purposes; vibration detectors; vibration sensors; instruments for measuring vibration; vibration exciters; transducers; transducer apparatus; testing apparatus for electronic equipment; portable test apparatus; load cells; gauges; strain gauges; X-ray gauges; ultrasonic thickness gauges; ultrasonic sensors; ultrasonic measuring apparatus; signal conditioners; amplifiers; weight measuring instruments; weighing apparatus and instruments; electronic weighing scales; calibration devices; graduation checkers [calibration checkers]; seismic detectors; safety monitoring apparatus [electric]; transmitters; telecommunication transmitters, apparatus and equipment; telecommunication networks; real-time data processing apparatus; lasers; laser measuring systems; lasers for industrial use; apparatus for analysing gases; bar code scanners; bar code readers; bar code decoders; thermocouples; temperature measuring instruments; temperature controllers; instruments for temperature control; temperature controlling apparatus; resistance temperature detectors; thermistors; humidity measuring apparatus; humidity meters; humidity sensors; infrared detectors; infrared detection apparatus; infrared thermometers; infrared scanners; infrared sensors; electric control devices for heating management; pressure sensors; force sensors; instruments for measuring pressure; torque measuring apparatus; flow measuring apparatus; level measuring instruments and apparatus; water quality measuring instruments and apparatus; data loggers and recorders; USB [universal serial bus] operating software; programmable logic controllers; man-machine interfaces; motion and motor controls; sensor switches; data switches; switches, electric; switching apparatus (Electric -); panel meters; digital panel meters; light emitting diode (led) displays and liquid crystal displays (lcd) for the purposes of industrial process monitoring; computer software relating to the aforesaid; downloadable publications relating to the aforesaid; parts and fittings for all the aforesaid; none of the foregoing for use in collecting, analysing or managing client/customer records or for use in relation to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events. business consultancy; market analysis; business data analysis; business strategy advice and consultancy; collection of data; data processing; data processing services; computerised data processing; data management services; head office services; office functions services; business office services; company office secretarial services; office administration services [for others]; office management services [for others]; none of the foregoing services relating to the collection, analysis or management of client customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events. Installation of data processing equipment; installation, maintenance and repair of machines and machine tools for use with scientific, industrial, laboratory, optical, weighing and measuring apparatus and instruments, machines and machine tools for the treatment of materials, machines and machine tools for sample preparation, moving and handling equipment. Platform as a service (PAAS); software as a service (SaaS); monitoring of network systems; computer system monitoring services; services for monitoring industrial processes; process monitoring for quality assurance; industrial and technological engineering analysis; creating programmes for data processing; engineering services; engineering services for the analysis of structures; testing, authentication and quality control; quality testing; quality control; quality control testing; quality control services; quality audits; quality assurance consultancy; providing quality assurance services; assessing chemical information in relation to risks; environmental monitoring services; design of computer software; software development in the framework of software publishing; analysis of materials; materials testing and analysing; chemical analysis; chemical analysis services; sound and vibration measurement; testing of apparatus; testing of computing equipment; calibration services; measurement services; laboratory testing services; technical testing services; creation, maintenance and adaptation and repair of software; rental of software and data processing equipment; installation of software; engineering consultancy; engineering consultancy relating to manufacture; technological services relating to manufacture; development of computer software application solutions; development of software solutions for internet users; computerisation services, computer programming, as well as consultancy in the field of computerisation, computer programming and automatic data; updating and adapting of computer programs; gas analysing services; engineering project management services; environmental consultancy services; environmental testing of vibration; consultancy, information and advice related to the aforesaid; scientific, technical and industrial research; certification [quality control]; monitoring services; sampling for contamination; creation, maintenance, adaptation and repair of software; rental and installation of software; compilation of environmental information; development of computer programs for simulating the operation of vehicles for locomotion by land, air, water or rail, engineering services for the development and simulation of mechanical systems in the automotive, motorsport, motorcycle, aircraft, and rail industries; programming and design of electronic control systems; research, design, maintenance, development and updating of simulation software; none of the foregoing services relating to the collection, analysis or management of client customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events.

8.

NON-INVASIVE MEASUREMENT AND CALCULATION SYSTEM

      
Numéro d'application US2022016549
Numéro de publication 2022/177951
Statut Délivré - en vigueur
Date de dépôt 2022-02-16
Date de publication 2022-08-25
Propriétaire OMEGA ENGINEERING, INC. (USA)
Inventeur(s)
  • Leibig, Kenneth
  • Annen, Matthew
  • Zhu, Ye
  • Austin, Jr., David, Allen

Abrégé

Too q"Too q"q") measurements from the first sensor and the second sensor and to calculate a temperature of the medium in the container or conduit based on input variables about the container or conduit including radius, thickness and thermal conductivity of the material of the container or conduit.

Classes IPC  ?

  • G01N 25/18 - Recherche ou analyse des matériaux par l'utilisation de moyens thermiques en recherchant la conductivité thermique
  • G01K 1/143 - Supports; Dispositifs de fixation; Dispositions pour le montage de thermomètres en des endroits particuliers pour la mesure de la température de surfaces
  • G01K 1/14 - Supports; Dispositifs de fixation; Dispositions pour le montage de thermomètres en des endroits particuliers
  • G01K 13/02 - Thermomètres spécialement adaptés à des fins spécifiques pour mesurer la température de fluides en mouvement ou de matériaux granulaires capables de s'écouler
  • G01K 17/06 - Mesure d'une quantité de chaleur transportée par des milieux en écoulement, p.ex. dans les systèmes de chauffage
  • G01K 7/42 - Circuits pour la compensation de l’inertie thermique; Circuits pour prévoir la valeur stationnaire de la température
  • G01K 7/02 - Mesure de la température basée sur l'utilisation d'éléments électriques ou magnétiques directement sensibles à la chaleur utilisant des éléments thermo-électriques, p.ex. des thermocouples

9.

NON-INVASIVE MEASUREMENT AND CALCULATION SYSTEM

      
Numéro d'application 17673045
Statut En instance
Date de dépôt 2022-02-16
Date de la première publication 2022-08-18
Propriétaire OMEGA Engineering, Inc. (USA)
Inventeur(s)
  • Leibig, Kenneth
  • Annen, Matthew
  • Zhu, Ye
  • Austin, Jr., David Alan

Abrégé

A non-invasive measuring device calculates a temperature of a medium in a container or conduit. The device includes at least one first sensor disposed on an exterior surface of the container or conduit and measures a temperature (To) of the exterior surface. The measuring device also includes at least one second sensor disposed on the exterior surface and measures a heat flux (q″) moving through a wall of the container or conduit. The measuring device further includes a processor operatively coupled to the first sensor and the second sensor. The processor is configured to receive the temperature (To) measurements and the heat flux (q″) measurements from the first sensor and the second sensor and to calculate a temperature of the medium in the container or conduit based on input variables about the container or conduit including radius, thickness and thermal conductivity of the material of the container or conduit.

Classes IPC  ?

  • G01K 17/00 - Mesure d'une quantité de chaleur
  • G01K 7/16 - Mesure de la température basée sur l'utilisation d'éléments électriques ou magnétiques directement sensibles à la chaleur utilisant des éléments résistifs
  • G01K 1/143 - Supports; Dispositifs de fixation; Dispositions pour le montage de thermomètres en des endroits particuliers pour la mesure de la température de surfaces
  • G01K 1/08 - Dispositifs de protection, p.ex. étuis
  • G01K 1/024 - Moyens d’indication ou d’enregistrement spécialement adaptés aux thermomètres pour l’indication à distance

10.

FUSION ARRAY

      
Numéro de série 97535094
Statut Enregistrée
Date de dépôt 2022-08-04
Date d'enregistrement 2023-09-19
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Custom design of geophysical instrumentation and related computer software; collection and recording of passive seismic data for the petroleum, mining and geotechnical industries using sensors; collection and recording of microseismic activity and strain data associated with subsurface operations for the petroleum, mining and geotechnical industries using sensors; geophysical seismic analysis services

11.

ONEMAP

      
Numéro d'application 1633124
Statut Enregistrée
Date de dépôt 2021-10-22
Date d'enregistrement 2021-10-22
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Computer application software for 3d visualization and interpretation of microseismic data. Providing online non-downloadable software for 3D visualization and interpretation of microseismic data; platform as a service (PaaS) featuring computer software platforms for 3D visualization and interpretation of microseismic data; software as a service (SaaS) featuring computer software platforms for 3D visualization and interpretation of microseismic data; consultancy in the field of microseismic monitoring.

12.

SERVOMEX

      
Numéro de série 97141029
Statut En instance
Date de dépôt 2021-11-24
Propriétaire Servomex Group Limited (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 10 - Appareils et instruments médicaux
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(Based on Use in Commerce) Residual gas analyzers, and structural parts and fittings therefor; apparatus for analyzing gases, namely, electronic-based oxygen analyzers for measuring concentration of oxygen in gases, and structural parts and fittings therefor; chromatography apparatus for laboratory use, and structural parts and fittings therefor; apparatus for analyzing gases, namely, electronic-based precision measuring apparatus for measuring physical properties and concentrations of gas emissions and gas impurities for the purposes of production process efficiency and safe use of gases in hazardous environments, and structural parts and fittings therefor; air emissions analysis apparatus, and structural parts and fittings therefor; gas testing instruments, and structural parts and fittings therefor; apparatus for analyzing gases, namely, electronic-based measuring instruments for measuring physical properties and quantities of gas emissions and gas impurities for the purposes of production process efficiency and safe use of gases in hazardous environments, and structural parts and fittings therefor; moisture analyzers, namely, measuring apparatus for humidity levels in gases, and structural parts and fittings therefor; apparatus for analyzing gases, namely, electronic-based ambient air analyzer monitors for detecting and analyzing toxic gases and other gases in the atmosphere and other environments for the purpose of measuring concentrations of different gases, and structural parts and fittings therefor; gas sensors for measuring gas concentration, namely, sensors for determining the concentration of a component in a gas or gases; downloadable computer software and firmware for use in monitoring, measuring and analyzing gases, oxygen, moisture and ambient air; downloadable computer software and firmware for calibrating gas and moisture analyzers; downloadable computer software and firmware for monitoring, calibrating, measuring and analyzing component elements of gases, including moisture content for diagnostic use in the field of gas, oxygen, moisture and ambient air analysis; gas sampling equipment, namely, apparatus for analyzing and testing gas samples for the detection of impurities and to measure concentrations of different gases for industrial and manufacturing purposes (Based on Intent to Use) Gas sampling equipment, namely, sample preparation device for medical diagnostic uses (Based on Intent to Use) Providing temporary use of online non-downloadable computer software and firmware for use in monitoring, measuring and analyzing gases, including oxygen, moisture and ambient air; providing temporary use of online non-downloadable computer software and firmware for calibrating gas and moisture analyzers; providing temporary use of online non-downloadable computer software and firmware for monitoring, calibrating, measuring and analyzing component elements of gases, including moisture content for diagnostic use in the field of gas, including oxygen, moisture and ambient air analysis

13.

ONEMAP

      
Numéro de série 79328515
Statut Enregistrée
Date de dépôt 2021-10-22
Date d'enregistrement 2023-05-16
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Downloadable computer application software for 3d visualization and interpretation of microseismic data Providing online non-downloadable software for 3D visualization and interpretation of microseismic data; platform as a service (PaaS) featuring computer software platforms for 3D visualization and interpretation of microseismic data; software as a service (SaaS) featuring computer software platforms for 3D visualization and interpretation of microseismic data; technical consultancy in the field of microseismic monitoring

14.

GLOW PLASMA GAS MEASUREMENT SIGNAL PROCESSING

      
Numéro d'application 17223941
Statut En instance
Date de dépôt 2021-04-06
Date de la première publication 2021-10-07
Propriétaire Servomex Group Limited (Royaume‑Uni)
Inventeur(s)
  • Alizadeh, Bahram
  • Lopez, Martin

Abrégé

Provided are methods, apparatuses and systems for enhanced determination of the gas composition of a sample gas using glow discharge optical emission spectroscopy (GD-OES) for gas analysis. A first method comprises: generating one or more oscillating electromagnetic fields within a plasma cell to excite particles within the cell, to produce a glow discharge plasma in the plasma cell, and controlling the operating conditions for the plasma cell while flowing a gas mixture through the plasma cell to maintain glow discharge optical emissions from the plasma within a desired operating range; and monitoring one or more glow discharge optical emissions from the plasma in the plasma cell; wherein said monitoring of the optical emissions comprises measuring the optical emissions, or measuring a signal that correlates with the optical emissions, at twice the plasma excitation frequency; and processing the signal during each excitation cycle of the electromagnetic excitation, to determine the concentration of a gas within a gas mixture flowing through the plasma cell.

Classes IPC  ?

  • G01N 21/67 - Systèmes dans lesquels le matériau analysé est excité de façon à ce qu'il émette de la lumière ou qu'il produise un changement de la longueur d'onde de la lumière incidente excité électriquement, p.ex. par électroluminescence en utilisant des arcs électriques ou des décharges électriques
  • G01N 21/68 - Systèmes dans lesquels le matériau analysé est excité de façon à ce qu'il émette de la lumière ou qu'il produise un changement de la longueur d'onde de la lumière incidente excité électriquement, p.ex. par électroluminescence en utilisant des champs électriques à haute fréquence
  • G01J 3/443 - Spectrométrie par émission

15.

GLOW PLASMA GAS MEASUREMENT SIGNAL PROCESSING

      
Numéro de document 03114186
Statut En instance
Date de dépôt 2021-04-06
Date de disponibilité au public 2021-10-06
Propriétaire SERVOMEX GROUP LIMITED (Royaume‑Uni)
Inventeur(s)
  • Alizadeh, Bahram
  • Lopez, Martin

Abrégé

Provided are methods, apparatuses and systems for enhanced determination of the gas composition of a sample gas using glow discharge optical emission spectroscopy (GD- OES) for gas analysis. A first method comprises: generating one or more oscillating electromagnetic fields within a plasma cell to excite particles within the cell, to produce a glow discharge plasma in the plasma cell, and controlling the operating conditions for the plasma cell while flowing a gas mixture through the plasma cell to maintain glow discharge optical emissions from the plasma within a desired operating range; and monitoring one or more glow discharge optical emissions from the plasma in the plasma cell; wherein said monitoring of the optical emissions comprises measuring the optical emissions, or measuring a signal that correlates with the optical emissions, at twice the plasma excitation frequency; and processing the signal during each excitation cycle of the electromagnetic excitation, to determine the concentration of a gas within a gas mixture flowing through the plasma cell.

Classes IPC  ?

  • G01N 21/68 - Systèmes dans lesquels le matériau analysé est excité de façon à ce qu'il émette de la lumière ou qu'il produise un changement de la longueur d'onde de la lumière incidente excité électriquement, p.ex. par électroluminescence en utilisant des champs électriques à haute fréquence

16.

SEISALERT

      
Numéro d'application 211603000
Statut En instance
Date de dépôt 2021-06-23
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

(1) Downloadable software for detection and notification of seismic events

17.

ESG SOLUTIONS

      
Numéro d'application 211602800
Statut En instance
Date de dépôt 2021-06-23
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Geophysical instrumentation, namely, geophones, accelerometers, data acquisition units in the nature of electronic data recorders and software to detect, record, evaluate and provide warning of industrial seismic activity. (1) Custom design of geophysical instrumentation, namely, geophones, accelerometers, acquisition units in the nature of electronic data recorders, and software to monitor industrial seismic activity; collection and recording of passive seismic data for the petroleum, mining and geotechnical industries using sensors; geophysical analysis and interpretation of passive seismic data for the petroleum, mining and geotechnical industries using computers; monitoring seismicity associated with reservoir processes during hydraulic fracturing, enhanced oil recovery, underground gas storage, waste injection, underground and open-pit mining and geotechnical applications; geophysical research and consulting services.

18.

SEISALERT

      
Numéro de série 90788001
Statut Enregistrée
Date de dépôt 2021-06-22
Date d'enregistrement 2022-07-12
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

downloadable software for detection and notification of seismic events

19.

ESG SOLUTIONS

      
Numéro de série 90788009
Statut Enregistrée
Date de dépôt 2021-06-22
Date d'enregistrement 2023-04-11
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Geophysical instrumentation, namely, geophones, accelerometers, data acquisition units in the nature of electronic data recorders all used to detect, record, evaluate and provide warning of industrial seismic activity; Geophysical instrumentation, namely, downloadable software to detect, record, evaluate and provide warning of industrial seismic activity Custom design of geophysical instrumentation, namely, geophones, accelerometers, acquisition units in the nature of electronic data recorders, and software to monitor industrial seismic activity; collection and recording of passive seismic data for the petroleum, mining and geotechnical industries using sensors; geophysical analysis and interpretation of passive seismic data for the petroleum, mining and geotechnical industries using computers; monitoring seismicity associated with reservoir processes during hydraulic fracturing, enhanced oil recovery, underground gas storage, waste injection, underground and open-pit mining and geotechnical applications; geophysical research and consulting services

20.

ONEMAP

      
Numéro d'application 210191100
Statut En instance
Date de dépôt 2021-04-22
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Computer application software for 3D visualization and interpretation of microseismic data (1) Providing online non-downloadable software for 3D visualization and interpretation of microseismic data; Platform as a service (PaaS) featuring computer software platforms for 3d visualization and interpretation of microseismic data; Software as a service (SaaS) featuring computer software platforms for 3d visualization and interpretation of microseismic data; Consultancy in the field of microseismic monitoring

21.

SURFACE-MOUNTABLE (SMD) THERMOCOUPLE CONNECTOR WITH REVERSE POLARITY PROTECTION

      
Numéro de document 03155853
Statut En instance
Date de dépôt 2019-12-05
Date de disponibilité au public 2021-04-01
Propriétaire OMEGA ENGINEERING, INC. (USA)
Inventeur(s)
  • Leibig, Kenneth J.
  • Annen, Matthew

Abrégé

A connector to easily and correctly join an electrical component to a printed circuit board is provided. The connector comprises a generally C-shaped electrically conductive element that provides for connection alternatively to the positive and negative terminals of a device depending on the orientation of the connector. In this way, one connector is made that can be used to alternatively satisfy connection to both positive and negative terminals and thereby simplify the construction of the element. Because of the shapes of the ends of the connector, a device can only be plugged in one way. The connector can be made from a single sheet of electrically conductive material bent generally into a "C" shape, with specific tabs and cuts made therein. The connector includes a tab that allows for quick and automated connection to a printed circuit board, and an element to prevent connectors from interlocking while in a loose and unconnected state as, during manufacturing, plating, or storage, allowing them to be added to a board using automated procedures for quick, accurate and low cost construction.

Classes IPC  ?

  • H01R 12/57 - Connexions fixes pour circuits imprimés rigides ou structures similaires caractérisées par les bornes bornes pour le montage en surface
  • H01R 24/60 - Contacts espacés le long de la paroi latérale plane transversalement par rapport à l'axe longitudinal d’engagement
  • H01R 13/04 - Broches ou lames destinées à coopérer avec des alvéoles

22.

SURFACE-MOUNTABLE (SMD) THERMOCOUPLE CONNECTOR WITH REVERSE POLARITY PROTECTION

      
Numéro d'application US2019064609
Numéro de publication 2021/061174
Statut Délivré - en vigueur
Date de dépôt 2019-12-05
Date de publication 2021-04-01
Propriétaire OMEGA ENGINEERING, INC. (USA)
Inventeur(s)
  • Leibig, Kenneth, J.
  • Annen, Matthew

Abrégé

A connector to easily and correctly join an electrical component to a printed circuit board is provided. The connector comprises a generally C-shaped electrically conductive element that provides for connection alternatively to the positive and negative terminals of a device depending on the orientation of the connector. In this way, one connector is made that can be used to alternatively satisfy connection to both positive and negative terminals and thereby simplify the construction of the element. Because of the shapes of the ends of the connector, a device can only be plugged in one way. The connector can be made from a single sheet of electrically conductive material bent generally into a "C" shape, with specific tabs and cuts made therein. The connector includes a tab that allows for quick and automated connection to a printed circuit board, and an element to prevent connectors from interlocking while in a loose and unconnected state as, during manufacturing, plating, or storage, allowing them to be added to a board using automated procedures for quick, accurate and low cost construction.

Classes IPC  ?

  • H01R 12/57 - Connexions fixes pour circuits imprimés rigides ou structures similaires caractérisées par les bornes bornes pour le montage en surface
  • H01R 13/04 - Broches ou lames destinées à coopérer avec des alvéoles
  • H01R 24/60 - Contacts espacés le long de la paroi latérale plane transversalement par rapport à l'axe longitudinal d’engagement
  • H01R 103/00 - Deux pôles

23.

Surface-mountable thermocouple connector with reverse polarity protection

      
Numéro d'application 16703476
Numéro de brevet 11688978
Statut Délivré - en vigueur
Date de dépôt 2019-12-04
Date de la première publication 2021-03-25
Date d'octroi 2023-06-27
Propriétaire Omega Engineering, Inc. (USA)
Inventeur(s)
  • Leibig, Kenneth J.
  • Annen, Matthew

Abrégé

A connector to easily and correctly join an electrical component to a printed circuit board is provided. The connector comprises a generally C-shaped electrically conductive element that provides for connection alternatively to the positive and negative terminals of a device depending on the orientation of the connector. As a result of the shapes of the ends of the connector, a device can only be plugged in one way. The connector can be made from a single sheet of electrically conductive material bent generally into a “C” shape, with specific tabs and cuts made therein. The connector includes a tab that allows for quick and automated connection to a printed circuit board, and an element to prevent connectors from interlocking while in a loose and unconnected state as, during manufacturing, plating, or storage, allowing them to be added to a board using automated procedures for quick, accurate and low cost construction.

Classes IPC  ?

  • H01R 13/642 - Moyens pour empêcher, bloquer ou éviter le couplage incorrect par la position ou la forme des pièces de contact
  • H01R 13/03 - Contacts caractérisés par le matériau, p.ex. matériaux de plaquage ou de revêtement
  • H01R 12/57 - Connexions fixes pour circuits imprimés rigides ou structures similaires caractérisées par les bornes bornes pour le montage en surface
  • H01R 43/20 - Appareils ou procédés spécialement adaptés à la fabrication, l'assemblage, l'entretien ou la réparation de connecteurs de lignes ou de collecteurs de courant ou pour relier les conducteurs électriques pour assembler les pièces de contact avec le socle isolant, le boîtier ou le manchon ou pour les en désassembler
  • H01R 13/10 - Alvéoles destinés à coopérer avec des broches ou lames

24.

GLOW PLASMA STABILIZATION

      
Numéro d'application 16841051
Statut En instance
Date de dépôt 2020-04-06
Date de la première publication 2020-10-29
Propriétaire Servomex Group Limited (Royaume‑Uni)
Inventeur(s)
  • Alizadeh, Bahram
  • Lopez, Martin
  • Ratcliffe, Michael Anthony
  • Batson, Nicky Jay

Abrégé

Provided are methods, apparatus and systems for stabilization of a glow discharge from a plasma. Also provided are methods, apparatus and systems for processing optical signals from a stabilised glow plasma with enhanced signal to noise recovery. A first method comprises: generating an electric field within a plasma cell using an alternating excitation voltage to excite particles within the cell, to produce a glow discharge from a plasma in the plasma cell in a resonant condition; monitoring, in each excitation cycle of the alternating excitation voltage, one or more signals that correlate with glow discharge optical emissions from the plasma in the plasma cell; and, in response to said monitoring, controlling one or more operating conditions for the plasma cell to maintain the glow discharge emissions from the plasma within a desired operating range in each excitation cycle of the alternating excitation voltage. A relatively stable glow discharge optical emission is maintained via dynamic resonant feedback control of operating conditions such as the electric field that is used to excite particles within the plasma cell. The stabilization of the glow plasma can be used in glow discharge optical emission spectroscopy (GD-OES) for gas analysis and in other applications.

Classes IPC  ?

  • H01J 37/32 - Tubes à décharge en atmosphère gazeuse

25.

LAYERN

      
Numéro d'application 1556499
Statut Enregistrée
Date de dépôt 2020-08-27
Date d'enregistrement 2020-08-27
Propriétaire Omega Engineering Inc. (USA)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Smart sensors, smart probes and gateway routers being computer control hardware for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity; computer hardware, and downloadable firmware and downloadable software for control of smart sensors, smart probes and gateways, electronic data storage devices for storage of electronic data locally or via telecommunication network for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity. Providing temporary use of cloud-based software featuring non-downloadable software for notification, electronic data storage, analysis and visualization of electronic data that allow businesses to access electronic data gathered from connected sensors, namely, sensors that measure and control standalone meters and controllers or connected meters and controllers directly for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity.

26.

GLOW PLASMA STABILISATION

      
Numéro de document 03077841
Statut En instance
Date de dépôt 2020-04-06
Date de disponibilité au public 2020-10-05
Propriétaire SERVOMEX GROUP LIMITED (Royaume‑Uni)
Inventeur(s)
  • Lopez, Martin
  • Alizadeh, Bahram
  • Ratcliffe, Michael Anthony
  • Batson, Nicky Jay

Abrégé

Provided are methods, apparatus and systems for stabilisation of a glow discharge from a plasma. Also provided are methods, apparatus and systems for processing optical signals from a stabilised glow plasma with enhanced signal to noise recovery. A first method comprises: generating an electric field within a plasma cell using an alternating excitation voltage to excite particles within the cell, to produce a glow discharge from a plasma in the plasma cell in a resonant condition; monitoring, in each excitation cycle of the alternating excitation voltage, one or more signals that correlate with glow discharge optical emissions from the plasma in the plasma cell; and, in response to said monitoring, controlling one or more operating conditions for the plasma cell to maintain the glow discharge emissions from the plasma within a desired operating range in each excitation cycle of the alternating excitation voltage. A relatively stable glow discharge optical emission is maintained via dynamic resonant feedback control of operating conditions such as the electric field that is used to excite particles within the plasma cell. The stabilisation of the glow plasma can be used in glow discharge optical emission spectroscopy (GD-OES) for gas analysis and in other applications.

Classes IPC  ?

  • H05H 1/00 - Production du plasma; Mise en œuvre du plasma
  • G01N 21/67 - Systèmes dans lesquels le matériau analysé est excité de façon à ce qu'il émette de la lumière ou qu'il produise un changement de la longueur d'onde de la lumière incidente excité électriquement, p.ex. par électroluminescence en utilisant des arcs électriques ou des décharges électriques
  • G01N 27/68 - Utilisation de la décharge électrique pour ioniser un gaz

27.

LAYERN

      
Numéro d'application 205912500
Statut Enregistrée
Date de dépôt 2020-08-27
Date d'enregistrement 2022-06-15
Propriétaire Omega Engineering Inc. (USA)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Smart sensors, smart probes and gateway routers being computer control hardware for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity; computer hardware, and downloadable firmware and downloadable software for control of smart sensors, smart probes and gateways, electronic data storage devices for storage of electronic data locally or via telecommunication network for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity. (1) Providing temporary use of cloud-based software featuring non-downloadable software for notification, electronic data storage, analysis and visualization of electronic data that allow businesses to access electronic data gathered from connected sensors, namely, sensors that measure and control standalone meters and controllers or connected meters and controllers directly for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity.

28.

LAYER N

      
Numéro de série 88814572
Statut Enregistrée
Date de dépôt 2020-02-28
Date d'enregistrement 2021-04-27
Propriétaire Omega Engineering Inc. ()
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Smart sensors, smart probes and gateway routers being computer control hardware for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity; computer hardware, and downloadable firmware and downloadable software for control of smart sensors, smart probes and gateways, electronic data storage devices for storage of electronic data locally or via telecommunication network for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity Providing temporary use of cloud-based software featuring non-downloadable software for notification, electronic data storage, analysis and visualization of electronic data that allow businesses to access electronic data gathered from connected sensors, namely, sensors that measure and control standalone meters and controllers or connected meters and controllers directly for use in measuring, controlling, and regulating, strain, flow, force, level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, and conductivity

29.

BTG

      
Numéro d'application 1492080
Statut Enregistrée
Date de dépôt 2019-04-25
Date d'enregistrement 2019-04-25
Propriétaire BTG Eclépens SA (Suisse)
Classes de Nice  ?
  • 07 - Machines et machines-outils
  • 09 - Appareils et instruments scientifiques et électriques
  • 16 - Papier, carton et produits en ces matières
  • 25 - Vêtements; chaussures; chapellerie
  • 35 - Publicité; Affaires commerciales
  • 37 - Services de construction; extraction minière; installation et réparation
  • 40 - Traitement de matériaux; recyclage, purification de l'air et traitement de l'eau
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Blades, bars and holders thereof [parts of machines]; valves (parts of machines); machines and machine tools; motors and engines (other than for land vehicles); machine couplings and transmission components (other than for land vehicles). Weighing, measuring, signaling, detecting, testing, analyzing, titrating, transmitting and controlling apparatus and instruments; calculating machines; apparatus and instruments for the pulp and paper industry, chemical industry or process industry, namely, solid suspension analyzers, consistency transmitters, density transmitters, dewatering rate transmitters, whiteness transmitters, chemical residue analyzers, viscosity transmitters, lignin concentration analyzers, level detectors, weight gauges, sampling and weighing equipment, titrators and particle load detectors; data processing equipment and computers; process control software and systems for manufacturing pulp, fiber, paper, cardboard and handkerchiefs; computer software for process optimization; computer software and electronic sensors for industrial operation data collection; downloadable electronic instruction manuals; sensors and transmitters for on-line measurement of fiber properties such as strength, clarity, residue rate and viscosity; load control, retention, gas content and Kappa analyzers. Paper and paperboard and products made from these materials not included in other classes; printing products (printed matter); stationery and office requisites (excluding furniture); instructional and teaching material (excluding materials). Clothing, footwear, headgear. Manual and computer processing, analysis, acquisition and storage of information and data related to manufacture of pulp, fiber, paper, cardboard and handkerchiefs. Repair, installation and maintenance of equipment in the field of manufacture of pulp, fiber, paper, cardboard and handkerchiefs; remote inspection and diagnostic services for monitoring the condition and operation of machinery and equipment in the field of manufacture of pulp, fiber, paper, cardboard and handkerchiefs. Treatment of materials; coating of bars, beds for aforesaid bars and blades used in paper manufacturing. Scientific and technological services as well as research and design services relating thereto; industrial analysis and research services; surveying and consultant services (engineering work) in the field of the production and printing of paper pulp and paper; research and consultancy in the field of computer software; research, development, engineering and design of computer software; design, development, programming and implementation of software, software for data processing, data analysis, data visualization, advanced methods of process management and automation of systems and their computer applications; hosting of digital data; all these services being limited to the field of pulp and paper; remote diagnostic services for monitoring the condition and operation of machinery and equipment in the field of manufacture of pulp, fiber, paper, cardboard and handkerchiefs.

30.

Weldable FBG strain sensor arrangement

      
Numéro d'application 16464990
Numéro de brevet 10584959
Statut Délivré - en vigueur
Date de dépôt 2017-07-24
Date de la première publication 2019-09-12
Date d'octroi 2020-03-10
Propriétaire Hottinger Baldwin Messtechnik GmbH (Allemagne)
Inventeur(s)
  • Maul, Jochen
  • Kipp, Tobias
  • Günther, Bernd
  • Cabral Bobião Girão, Maria Marta
  • Moita Araújo, Francisco Manuel

Abrégé

A FBG strain sensor arrangement includes a sensor carrier of steel sheet to which a FBG strain sensor is fastened. A protective cover has a first part configured thin and narrow and bonded to the sensor carrier along an optical fiber so that the optical fiber lying underneath is fixed with a fiber Bragg grating on the sensor carrier. The protective cover is enlarged at each end portion of the optical fiber to thereby form a cavity underneath, with edges of the enlarged second part of the protective cover being bonded to the sensor carrier. Arranged in the cavity is an elastic filler which embeds the coupling points in a vibration damping manner. The protective cover with elastic filler accommodates thermal expansions and functions for dynamic measurements by the vibration damping.

Classes IPC  ?

  • G01B 11/16 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la déformation dans un solide, p.ex. indicateur optique de déformation
  • G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité
  • G02B 6/02 - Fibres optiques avec revêtement
  • G01D 5/353 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens optiques, c. à d. utilisant de la lumière infrarouge, visible ou ultraviolette avec atténuation ou obturation complète ou partielle des rayons lumineux les rayons lumineux étant détectés par des cellules photo-électriques en modifiant les caractéristiques de transmission d'une fibre optique

31.

Weldable strain sensor for curved surfaces

      
Numéro d'application 16336434
Numéro de brevet 10502553
Statut Délivré - en vigueur
Date de dépôt 2017-07-24
Date de la première publication 2019-07-18
Date d'octroi 2019-12-10
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Maul, Jochen
  • Kipp, Tobias
  • Günther, Bernd
  • Cabral Bobiâo Giråo, Maria Marta
  • Moita Araûjo, Francisco Manuel

Abrégé

A weldable strain sensor includes a strain sensor having two end portions in signal communication with signal lines for transmitting a measurement signal. A sensor carrier extends in a direction of the strain sensor and is firmly connected to the strain sensor. The sensor carrier includes two end portions having slots to thereby form tongues defining tongue ends which are directed in opposition to each other. Integrally surrounding the strain sensor and the end portions thereof is a protective cover of solid plastic which is firmly connected to the sensor carrier. The protective cover is configured in a region of the strain sensor narrow and flat and in a region of coupling points of the strain sensor with the signal lines at least twice as wide and at least twice as high as in a region of the strain sensor.

Classes IPC  ?

  • G01B 11/16 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la déformation dans un solide, p.ex. indicateur optique de déformation
  • G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité
  • G02B 6/02 - Fibres optiques avec revêtement

32.

SYSTEM FOR WIRELESSLY SUPPLYING ELECTRIC ENERGY TO A ROTATING DEVICE

      
Numéro d'application DE2018000378
Numéro de publication 2019/134720
Statut Délivré - en vigueur
Date de dépôt 2018-12-18
Date de publication 2019-07-11
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s) Kreuzer, Manfred

Abrégé

The invention relates to a system for wirelessly supplying electric energy to a rotating device, wherein the system comprises: a flange disk (1), a disk-shaped ring (2), an annular plastic filling (6), a receiving coil (7) which is embedded in the annular plastic filling (6), a U-shaped ferrite core (3a, 3b, 3c) having a short section (3a), the end face of which is directed to the plastic filling (6), a long section (3b) which is oriented parallel to the short section (3a) and which extends parallel along the outer surface of the annular plastic filling (6), wherein the sections (3a and 3b) are connected to one another via a section (3c), a coil system (4) and a receiving coil (7) consisting of circumferential wire windings (7), wherein the distance (a) of the end face of the long section (3c) from the axis of rotation of the flange disc (1) is smaller than the distance (b) of the receiving coil from the axis of rotation of the flange disc (1).

Classes IPC  ?

  • H01F 38/18 - Transformateurs rotatifs
  • H02J 50/00 - Circuits ou systèmes pour l'alimentation ou la distribution sans fil d'énergie électrique
  • H02J 50/70 - Circuits ou systèmes pour l'alimentation ou la distribution sans fil d'énergie électrique mettant en œuvre la réduction des champs de fuite électriques, magnétiques ou électromagnétiques

33.

INTERROGATOR FOR TWO FIBER BRAGG GRATING MEASUREMENT POINTS

      
Numéro d'application DE2018000377
Numéro de publication 2019/120356
Statut Délivré - en vigueur
Date de dépôt 2018-12-18
Date de publication 2019-06-27
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Ferreira, Luis Alberto De Almeida
  • Araljjo, Francisco Manuel Moita
  • Maul, Jochen

Abrégé

The invention relates to a measuring arrangement for fiber Bragg grating measurement points and particularly a measuring arrangement for two fiber Bragg gratings (FBG), wherein the first measurement point is stressed in tension and the second measurement point is stressed in compression, or vice versa. The circuit arrangement comprises a broadband light source (1), a first beamsplitter (2), a second beamsplitter (3), a third beamsplitter (4), a fourth beamsplitter (5), a fifth beamsplitter (6), photodiodes (7, 8, 9) and an optical delay element (10).

Classes IPC  ?

  • G01D 5/353 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens optiques, c. à d. utilisant de la lumière infrarouge, visible ou ultraviolette avec atténuation ou obturation complète ou partielle des rayons lumineux les rayons lumineux étant détectés par des cellules photo-électriques en modifiant les caractéristiques de transmission d'une fibre optique
  • G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité

34.

Masked coating blade

      
Numéro d'application 16088626
Numéro de brevet 11466407
Statut Délivré - en vigueur
Date de dépôt 2017-03-30
Date de la première publication 2019-04-18
Date d'octroi 2022-10-11
Propriétaire BTG ECLEPENS S.A. (Suisse)
Inventeur(s) Claudon, Alexandre

Abrégé

In a general aspect, a coating blade for application of coating color to a fibrous web can include an elongate substrate having a longitudinal edge. Within an operating zone of the coating blade intended for contact with a coating color, the elongate substrate can include a longitudinal wear-resistant deposit adjacent to the longitudinal edge. The coating blade, within the operating zone, can also include a longitudinal masking deposit adjoining the longitudinal wear-resistant deposit.

Classes IPC  ?

  • D21H 23/34 - Choucheuses du type à râcles ou à lames
  • B05C 11/04 - Appareils pour étaler ou répartir des liquides ou d'autres matériaux fluides déjà appliqués sur une surface; Réglage de l'épaisseur du revêtement comportant des lames
  • D21H 25/10 - Post-traitement du papier non prévu dans les groupes Élimination des matériaux en excès avec des lames
  • D21G 3/00 - Raclettes

35.

Strain/force sensor device for monitoring wear on overhead lines

      
Numéro d'application 16155493
Numéro de brevet 10557762
Statut Délivré - en vigueur
Date de dépôt 2018-10-09
Date de la première publication 2019-02-07
Date d'octroi 2020-02-11
Propriétaire Hottinger Baldwin Messtechnik GmbH (Allemagne)
Inventeur(s) Viel, Wolfgang

Abrégé

A device for measuring force and for monitoring wear on overhead lines includes a force-measuring system which includes two contact bars which, in an operating state, are oriented at a right angle to an overhead line to be monitored, and two connection bars, which, in the operating state, are oriented parallel to the overhead line. A bar-shaped force transducer is fastened to each end portion of the two connection bars and each of the bar-shaped force transducers extends in an axial direction of the respective connection bar.

Classes IPC  ?

  • G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité
  • B60L 5/20 - Collecteurs de courant pour lignes d'alimentation en énergie sur les véhicules propulsés électriquement utilisant des collecteurs en forme d'arc en contact avec le câble du trolley - Détails du contact de l'arc
  • B60L 5/22 - Organes de support pour l'arc de contact
  • G01L 5/107 - Appareils ou procédés pour la mesure des forces, du travail, de la puissance mécanique ou du couple, spécialement adaptés à des fins spécifiques pour la mesure de la tension dans les éléments flexibles, p.ex. dans les cordages, les câbles, les fils métalliques, les filaments, les courroies ou les bandes en utilisant des moyens électriques pour la mesure d’une force de réaction appliquée sur un élément disposé entre deux supports, p.ex. sur une pluralité de rouleaux ou de patins
  • G01D 5/353 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens optiques, c. à d. utilisant de la lumière infrarouge, visible ou ultraviolette avec atténuation ou obturation complète ou partielle des rayons lumineux les rayons lumineux étant détectés par des cellules photo-électriques en modifiant les caractéristiques de transmission d'une fibre optique

36.

SPECTRIS ADVANCE

      
Numéro d'application 1444782
Statut Enregistrée
Date de dépôt 2018-09-10
Date d'enregistrement 2018-09-10
Propriétaire Spectris Plc (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 35 - Publicité; Affaires commerciales
  • 37 - Services de construction; extraction minière; installation et réparation
  • 38 - Services de télécommunications
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Software platform for use in asset optimisation and business optimisation; measuring, detecting and monitoring instruments, indicators and controllers; electronic control systems; checking (supervision) apparatus and instruments; computer software platform for use in the monitoring, control or process and workflow optimisation of industrial and manufacturing processes, industrial automation, machine diagnostics and optimisation and the operational management of industrial and manufacturing processes (terms too vague in the opinion of the International Bureau – Rule 13 (2) (b) of the Common Regulations); electronic display interfaces for process management; information technology and audio-visual, multimedia and photographic devices; data storage devices; data or information processing appartus; telephones; electric control panels and consoles; control installations (electric) for remote monitoring, control or optimisation of industrial processes; electrical and electronic installations for the (remote) control of automated industrial processes including electonic displays, audible and optical alarm devices, control panels, consoles, control cable and knobs; automatic control systems for vehicles; computer software for collecting and distributing data within computer networks, including the internet, and enabling data communication among application programs and industrial devices; computer software for information management, data collection and data analysis; electro-dynamic devices for remote control of signals; electronic control instruments for creating, finding, recording, amplifying, repeating, transmitting and displaying images and signal sets; telecommunication devices; automatic position-finding devices, position related signalling devices; internet and intranet servers for providing data and software applied to process management (terms too vague in the opinion of the International Bureau – Rule 13 (2) (b) of the Common Regulations); downloadable cloud computer software for information technologies; security tokens [encryption devices]; interactive touch screen terminals; humanoid robots with artificial intelligence; computer software platforms, recorded or downloadable; personal digital assistants [PDAs]; thin client computers; downloadable graphics for mobile phones; wearable computers and computer peripherals; none of the foregoing for use in collecting, analysing or managing client/customer records or for use in relation to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events. Compilation of environmental information. Installation of data processing equipment. Radio broadcasting and communications; telecommunications; rental of access time to databases. Platform as a service (PAAS); software as a service (SaaS); monitoring of network systems; computer system monitoring services; services for monitoring industrial processes; process monitoring for quality assurance; industrial and technological engineering analysis; creating programmes for data processing; engineering services; engineering services for the analysis of structures; testing, authentication and quality control; quality testing; quality control; quality control testing; quality control services; quality audits; quality assurance consultancy; providing quality assurance services; assessing chemical information in relation to risks; environmental monitoring services; services for monitoring industrial processes; design of computer software; software development in the framework of software publishing; analysis of materials; materials testing and analysing; chemical analysis; chemical analysis services; blasting vibration measurement; testing of apparatus; testing of computing equipment; calibration services; measurement services; laboratory testing services; technical testing services; recordal of seismic data; monitoring the quality control of seismic procedures; geo-seismic survey services; creation, maintenance and adaptation and repair of software; rental of software and data processing equipment; installation of software; engineering consultancy; engineering consultancy relating to manufacture; technological services relating to manufacture; development of computer software application solutions; development of software solutions for internet users; computerisation services, computer programming, as well as consultancy in the field of computerisation, computer programming and automatic data processing (terms too vague in the opinion of the International Bureau – Rule 13 (2) (b) of the Common Regulations); updating and adapting of computer programs; gas analysing services; engineering project management services; environmental consultancy services; environmental testing of vibration; environmental testing of noise pollution; consultancy, information and advice related to the aforesaid; none of the foregoing services relating to the collection, analysis or management of client customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events.

37.

DOUBLE FLANGE TORQUE TRANSDUCER ASSEMBLY WITH A SAFETY FUNCTION AND TORQUE MEASURING METHOD

      
Numéro d'application DE2018000206
Numéro de publication 2019/007451
Statut Délivré - en vigueur
Date de dépôt 2018-07-07
Date de publication 2019-01-10
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Andrae, Jürgen
  • Haller, Markus
  • Markert, Florian

Abrégé

The invention relates to a double flange-torque transducer assembly which can be used, in particular, in safety-relevant areas. The invention also relates to a torque measuring method which can be used, preferably with the double flange-torque transducer assembly. The double flange-torque transducer assembly comprises the following characteristics: a measuring element (1) on which strain gauges (2) are secured, two disk-shaped securing flanges (3, 4) mounted parallel to each other between which the measuring element (1) extends and which are manufactured as a single piece together with the measuring element (1), and one first and one second rotational speed measuring device (5, 6; 7, 8), one rotational speed measuring device (5, 6; 7, 8) being associated with each securing flange (3, 4). The invention also relates to a method for using the torque transducer for determining the torque.

Classes IPC  ?

  • G01L 25/00 - Test ou étalonnage des appareils pour la mesure des forces, du couple, du travail, de la puissance ou du rendement mécanique
  • G01L 3/10 - Dynamomètres de transmission rotatifs dans lesquels l'élément transmettant le couple comporte un arbre élastique en torsion impliquant des moyens électriques ou magnétiques d'indication

38.

DOUBLE-FLANGE DEFORMATION BODY FOR A TORQUE SENSOR

      
Numéro d'application DE2018000172
Numéro de publication 2018/224067
Statut Délivré - en vigueur
Date de dépôt 2018-06-06
Date de publication 2018-12-13
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Heeg, Jochen
  • Malobabic, Kerstin
  • Schotte, Sven-Patrick

Abrégé

The invention relates to an integrally formed double-flange deformation body as a main body for the production of a torque sensor which is suitable for measuring axial forces. Said double-flange torque sensor comprises: a tubular torque measuring portion (1), which is arranged concentrically about the axis of rotation; a concentrically arranged annular securing flange (3a) having securing bores (5); a disk-shaped securing flange (4), which is arranged concentrically and in parallel thereto and is mutually spaced therefrom and has securing bores (5), and which is connected to one end of the tubular torque measuring portion (1); a support ring (3b) of rectangular cross-section, which is concentrically arranged within the securing flange (3a) and connected to the other end of the tubular torque measuring portion (1); at least 6 planar support struts (8) that radially extend between the outer circumference of the support ring (3b) and the inner circumference of the annular securing flange (3a); and a disk-shaped membrane (7) which extends between the outer circumference of the support ring (3b) and the inner circumference of the annular securing flange (3a).

Classes IPC  ?

  • G01L 1/26 - Mesures auxiliaires prises, ou dispositifs utilisés en liaison avec le mesurage des forces, p.ex. pour empêcher l'influence des composantes transversales de la force, pour empêcher la surcharge
  • G01L 3/10 - Dynamomètres de transmission rotatifs dans lesquels l'élément transmettant le couple comporte un arbre élastique en torsion impliquant des moyens électriques ou magnétiques d'indication
  • G01L 5/16 - Appareils ou procédés pour la mesure des forces, du travail, de la puissance mécanique ou du couple, spécialement adaptés à des fins spécifiques pour la mesure de plusieurs composantes de la force

39.

DOUBLE-FLANGE TORQUE SENSOR WITH CORRECTION SENSOR SYSTEM

      
Numéro d'application DE2018000146
Numéro de publication 2018/210365
Statut Délivré - en vigueur
Date de dépôt 2018-05-16
Date de publication 2018-11-22
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Andrae, Jürgen
  • Vierath, Rene
  • Würfl, Norbert
  • Gottschling, Anke

Abrégé

The invention relates to a double flange torque sensor equipped with a correction sensor system, having the following characteristics: a deforming element (1) on which strain gauges (2) are fixed, two parallel, disc-shaped securing flanges (3, 4) which are integrally connected to the deforming element (1) and which comprise securing boreholes (5), and at least three rod-shaped spring elements (6) which extend between the flanges (3, 4) and are secured thereto between the securing boreholes (5) or to the outer region of the securing boreholes (5). The spring elements have a rectangular cross-section, the shorter side thereof being oriented radially to the axis of rotation of the double-flange. At least one strain gauge (7) is arranged on each spring element (6). The invention also relates to a method for correcting the measured torque.

Classes IPC  ?

  • G01L 25/00 - Test ou étalonnage des appareils pour la mesure des forces, du couple, du travail, de la puissance ou du rendement mécanique
  • G01L 1/22 - Mesure des forces ou des contraintes, en général en faisant usage des cellules électrocinétiques, c. à d. des cellules contenant un liquide, dans lesquelles un potentiel électrique est produit ou modifié par l'application d'une contrainte en utilisant des jauges de contrainte à résistance
  • G01L 3/10 - Dynamomètres de transmission rotatifs dans lesquels l'élément transmettant le couple comporte un arbre élastique en torsion impliquant des moyens électriques ou magnétiques d'indication
  • G01L 3/14 - Dynamomètres de transmission rotatifs dans lesquels l'élément transmettant le couple est autre qu'un arbre élastique en torsion
  • G01L 5/00 - Appareils ou procédés pour la mesure des forces, du travail, de la puissance mécanique ou du couple, spécialement adaptés à des fins spécifiques
  • G01L 5/16 - Appareils ou procédés pour la mesure des forces, du travail, de la puissance mécanique ou du couple, spécialement adaptés à des fins spécifiques pour la mesure de plusieurs composantes de la force

40.

Doctor blade, inking arrangement and use of doctor blade in flexographic printing

      
Numéro d'application 15773437
Numéro de brevet 11718088
Statut Délivré - en vigueur
Date de dépôt 2016-11-04
Date de la première publication 2018-11-08
Date d'octroi 2023-08-08
Propriétaire BTG ECLEPENS S.A. (Suisse)
Inventeur(s) Claudon, Alexandre

Abrégé

A doctor blade (5, 7) for contact with an anilox roller (15) comprises a flat, elongate base element having a thickness of less than about 0.3 mm, which, along a longitudinal region of the doctor blade adapted for contact with said anilox roller, is provided with a coating (43). The coating comprises a metal matrix and at least about 65% by weight of one or more ceramic(s). The coating comprises 0 to 65% by weight of chromium carbide. An inking arrangement comprises an anilox roller and a doctor blade. A doctor blade is used in flexographic printing.

Classes IPC  ?

  • B41F 9/10 - Dispositifs d'essuyage avec des racles, des raclettes ou des dispositifs similaires
  • B41F 31/04 - Conduits, réservoirs, dispositifs d'alimentation ou de réglage du débit avec des lames d'encriers ou des dispositifs analogues de réglage du débit
  • B41N 10/00 - Blanchets ou habillages similaires; Habillages pour essuyeurs pour impression en creux
  • D21G 3/00 - Raclettes
  • B41F 31/20 - Dispositifs d'enlèvement ou de récupération d'encre
  • B41F 9/06 - Rotatives d'impression en creux - Parties constitutives

41.

DOUBLE-FLANGE TORQUE SENSOR

      
Numéro d'application DE2018000130
Numéro de publication 2018/202228
Statut Délivré - en vigueur
Date de dépôt 2018-05-07
Date de publication 2018-11-08
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Andrae, Jürgen
  • Vierath, Rene
  • Würfl, Norbert
  • Gottschling, Anke

Abrégé

The invention relates to a flange-shaped torque sensor having low zero error at high rotational speeds, comprising the following features: two parallel, disc-shaped securing flanges (3, 4) comprising securing boreholes (5) which are provided in the edge region of said securing flanges (3, 4), and a deforming element (1) which extends between the securing flanges (3, 4) and on which strain gauges (2) are arranged, wherein the deforming element (1) lies in the rotational axis of the double-flange torque sensor and, between the securing flanges (3, 4), at least three rod-shaped spring elements (6, 7) extend which are secured to the outer edge region of the securing flanges (3, 4) or between the boreholes (5), wherein no strain gauges or other sensors are provided on said spring elements (6, 7).

Classes IPC  ?

  • B25B 23/14 - Agencement pour limiter le couple de blocage ou pour indiquer le couple des clés ou des tournevis
  • G01L 3/10 - Dynamomètres de transmission rotatifs dans lesquels l'élément transmettant le couple comporte un arbre élastique en torsion impliquant des moyens électriques ou magnétiques d'indication
  • G01L 3/14 - Dynamomètres de transmission rotatifs dans lesquels l'élément transmettant le couple est autre qu'un arbre élastique en torsion

42.

Miscellaneous Design

      
Numéro d'application 1427662
Statut Enregistrée
Date de dépôt 2018-07-27
Date d'enregistrement 2018-07-27
Propriétaire Servomex Group Limited (Royaume‑Uni)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

Surveying apparatus and instruments; precision measuring apparatus; air analysis apparatus; gas testing instruments; measuring instruments; monitoring apparatus, electric; gasometers [measuring instruments]; aerometers; testing apparatus not for medical purposes; control panels [electricity]; flow meters; printed circuit boards; chips [integrated circuits]; infrared detectors; flashing lights [luminous signals]; semiconductors; converters; monitors [computer hardware]; electronic publications, downloadable; fuses; cables, electric; batteries; switches, electric; solenoid valves [electromagnetic switches].

43.

HUMMINGBIRD

      
Numéro d'application 1427977
Statut Enregistrée
Date de dépôt 2018-05-04
Date d'enregistrement 2018-05-04
Propriétaire Servomex Group Limited (Royaume‑Uni)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

Surveying apparatus and instruments; precision measuring apparatus; air analysis apparatus; gas testing instruments; measuring instruments; monitoring apparatus, electric; gasometers [measuring instruments]; aerometers; testing apparatus not for medical purposes; control panels [electricity]; flow meters; printed circuit boards; chips [integrated circuits]; infrared detectors; flashing lights [luminous signals]; semiconductor; converters; monitor [computer hardware]; electronic publications, downloadable; fuses; cables, electric; batteries; switches, electric; solenoid valves [electromagnetic switches].

44.

Miscellaneous Design

      
Numéro de série 79242747
Statut Enregistrée
Date de dépôt 2018-07-27
Date d'enregistrement 2019-10-08
Propriétaire Servomex Group Limited (Royaume‑Uni)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

precision measuring apparatus, namely apparatus for measuring physical properties of gases and liquids; air analysis apparatus; gas testing instruments; measuring instruments, namely, instruments for measuring physical properties of gases and liquids; electric monitoring apparatus, namely, electronic, optical, thermal, accoustic and chemical sensors for measuring physical properties of gases and liquids measuring instruments, namely, gasometers; aerometers; testing apparatus not for medical purposes, namely, apparatus for testing physical properties of gases and liquids including respiratory gases, process feed-stock gas and liquids, in process gas and liquid sampling, inerting/combustion control process gases, infrared detectors; downloadable electronic publications in the nature of application notes, technical bulletins, operation manuals, service manuals in the field of measuring physical properties of gases and liquids

45.

WELD-ON FBG STRAIN SENSOR ARRANGEMENT

      
Numéro d'application DE2017000225
Numéro de publication 2018/099501
Statut Délivré - en vigueur
Date de dépôt 2017-07-24
Date de publication 2018-06-07
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Maul, Jochen
  • Kipp, Tobias
  • Günther, Bernd
  • Cabral Bobião Girão, Maria Marta
  • Moita Araújo, Francisco Manuel

Abrégé

The invention relates to an FBG strain sensor arrangement (1) comprising a sensor carrier (4) of steel sheet and at least one FBG strain sensor (2) fastened on it, wherein the FBG strain sensor (2) has an optical fibre with two end portions, between which at least one Bragg grating is provided. Coupled on at each of the end portions is an optical signal line (3a, 3b) for passing on the measurement signal. Also provided is a protective covering (5), which has the following features: along the optical fibre, the protective covering (5) is formed as thin and narrow and is adhesively bonded to the sensor carrier (4), and so the optical fibre is fixed on the sensor carrier (4). On each of the two end portions of the optical fibre, the protective covering (5) is enlarged, and so a cavity is formed under it. The edges of the protective covering (5) are adhesively bonded to the sensor carrier (4). Arranged in the cavity, under the enlarged protective covering (5), is an elastic filler (6), which embeds the coupling location in a vibration-damping manner.

Classes IPC  ?

  • G01B 11/16 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la déformation dans un solide, p.ex. indicateur optique de déformation
  • G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité
  • G01D 5/353 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens optiques, c. à d. utilisant de la lumière infrarouge, visible ou ultraviolette avec atténuation ou obturation complète ou partielle des rayons lumineux les rayons lumineux étant détectés par des cellules photo-électriques en modifiant les caractéristiques de transmission d'une fibre optique
  • G02B 6/02 - Fibres optiques avec revêtement

46.

HUMMINGBIRD

      
Numéro de série 79242864
Statut Enregistrée
Date de dépôt 2018-05-04
Date d'enregistrement 2022-03-01
Propriétaire Servomex Group Limited (Royaume‑Uni)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

precision measuring apparatus, namely, apparatus for measuring physical properties of gases and liquids; air analysis apparatus; gas testing instruments; measuring instruments, namely, instruments for measuring physical properties of gases and liquids; electric monitoring apparatus, namely, electronic, optical, thermal, accoustic and chemical sensors for measuring physical properties of gases and liquids measuring instruments, namely, gasometers; aerometers; testing apparatus not for medical purposes, namely, apparatus for testing physical properties of gases and liquids including respiratory gases, process feed-stock gas and liquids, in process gas and liquid sampling, inerting/combustion control process gases, infrared detectors; all of the forgoing sold as an integral component of liquid and gas measuring devices or instruments; downloadable electronic publications in the nature of application notes, technical bulletins, operation manuals, service manuals in the field of measuring physical properties of gases and liquids; none of the foregoing for the purpose of measuring radiation or radioactive elements

47.

HOTSHOT

      
Numéro de série 87904155
Statut Enregistrée
Date de dépôt 2018-05-02
Date d'enregistrement 2021-06-15
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

Downhole seismic data acquisition systems comprised of seismic detectors, electronic data recorders, and computer hardware and software for detecting and recording seismic activity

48.

FIBER-OPTIC INCLINOMETER

      
Numéro d'application EP2017076760
Numéro de publication 2018/073369
Statut Délivré - en vigueur
Date de dépôt 2017-10-19
Date de publication 2018-04-26
Propriétaire
  • HOTTINGER BALDWIN MESSTECHNIK GMBH (Autriche)
  • ZÜBLIN SPEZIALTIEFBAU GMBH (Autriche)
Inventeur(s)
  • Klarer, Andreas
  • Kogler, Kurt

Abrégé

The invention relates to a device for determining at least one physical variable in constructions, comprising a tube (1) that is arranged in or on the construction and at least one sensor arrangement (2) for capturing the physical variable, wherein the sensor arrangement extends preferably over the entire length of the tube (1) and is connected to the tube (1) in a positively locking manner.

Classes IPC  ?

  • G01C 9/00 - Mesure de l'inclinaison, p.ex. par clinomètres, par niveaux

49.

HUMMINGBIRD

      
Numéro d'application 189406000
Statut Enregistrée
Date de dépôt 2018-04-17
Date d'enregistrement 2021-02-05
Propriétaire Servomex Group Limited (Royaume‑Uni)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

(1) Oxygen analyzers; gas and oxygen sensing equipment, namely oxygen sensors and gas sensors (2) Oxygen sensors

50.

HOTSHOT

      
Numéro d'application 189290300
Statut Enregistrée
Date de dépôt 2018-04-10
Date d'enregistrement 2021-02-17
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

(1) Downhole seismic data acquisition systems comprising seismic detectors, electronic data recorders, and computer hardware and software for detecting and recording seismic activity

51.

WELD-ON STRAIN SENSOR FOR CURVED SURFACES

      
Numéro d'application DE2017000224
Numéro de publication 2018/054404
Statut Délivré - en vigueur
Date de dépôt 2017-07-24
Date de publication 2018-03-29
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Maul, Jochen
  • Kipp, Tobias
  • Günther, Bernd
  • Cabral Bobião Girão, Maria Marta
  • Moita Araújo, Francisco Manuel

Abrégé

The invention relates to a weld-on strain sensor suitable for curved surfaces and having the following features: a. a strain sensor (2) having two end sections that are coupled via signals to signal lines (3a, 3b) for conducting the measurement signal; b. a sensor carrier (4) extending in the direction of the strain sensor (2) and securely connected to same; c. a protective cover (5) made of a solid plastic, which integrally surrounds the strain sensor (2) and the end sections of the signal lines (3a, 3b) and which is securely connected to the sensor carrier (4), wherein the protective cover (5) is designed to be narrow and flat in the region of the strain sensor (2) and, in the region of the coupling points of the signal lines (3a, 3b) with the strain sensor (2), said protective cover is at least double the width and at least double the height of the region of the strain sensor (2); and d. the end sections of the sensor carrier (4) have slits (6) such that tabs (7) are formed, wherein the tab ends are directed at one another.

Classes IPC  ?

  • G01B 11/16 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour mesurer la déformation dans un solide, p.ex. indicateur optique de déformation
  • G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité
  • G02B 6/02 - Fibres optiques avec revêtement

52.

MASKED COATING BLADE

      
Numéro d'application EP2017057581
Numéro de publication 2017/167904
Statut Délivré - en vigueur
Date de dépôt 2017-03-30
Date de publication 2017-10-05
Propriétaire BTG ECLÉPENS S.A. (Suisse)
Inventeur(s) Claudon, Alexandre

Abrégé

A coating blade (1) for application of coating color (7) to a fibrous web (6). The coating blade (1) comprises an elongate substrate (2) having a longitudinal edge. Within an operating zone, intended for contact with a coating color, of the coating blade, the substrate is provided with a longitudinal wear-resistant deposit (3) adjacent to the longitudinal edge and a longitudinal masking deposit (4) adjoining the longitudinal wear-resistant deposit.

Classes IPC  ?

  • D21H 25/10 - Post-traitement du papier non prévu dans les groupes Élimination des matériaux en excès avec des lames
  • B05C 11/04 - Appareils pour étaler ou répartir des liquides ou d'autres matériaux fluides déjà appliqués sur une surface; Réglage de l'épaisseur du revêtement comportant des lames
  • D21H 23/34 - Choucheuses du type à râcles ou à lames
  • D21G 3/00 - Raclettes

53.

X

      
Numéro de série 87621135
Statut Enregistrée
Date de dépôt 2017-09-25
Date d'enregistrement 2018-12-18
Propriétaire Malvern Instruments Limited (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Instruments and apparatus for performing chromatography, for the measurement of weight, size, shape, density, structure, concentration and characteristics of particles, molecules and macromolecules; instruments and apparatus performing optical image analysis, for the measurement weight, size, shape, density, structure, concentration and characteristics of particles, molecules and macromolecules; instruments and apparatus using laser diffraction and scattering, for the measurement of weight, size, shape, density, structure, concentration and characteristics of particles, molecules and macromolecules; scientific, industrial and laboratory apparatus and instruments for counting, sizing, classifying, differentiating and identifying particles in solids, liquids or gases; instruments for measuring rheological properties, namely, viscometers, rotary and capillary rheometers; instruments for measuring dimensional information of particles, namely, particle size, shape, density, structure and composition analysers; particle size and shape distribution and concentration measuring instruments, namely, particle counting instruments, air and liquid particle counters, photocorrelation spectroscopy instruments, instruments for producing zimm plots to determine the molecular weight of polymers, acoustic spectroscopy instruments, and laser diffraction measuring instruments; particle charge measuring instruments, namely, zeta potential measuring instruments, electrophoretic mobility measuring instruments, particle mobility measuring instruments, Ph measuring instruments, and micro electrophoresis measuring instruments; instruments for measuring the amount of heat involved in a chemical reaction or other process, namely, calorimeters; instruments for measuring molecular diffusion coefficient and hydrodynamic of molecules, namely, instruments that produce Taylor Dispersion Analysis plots; scientific and measuring apparatus and instruments, namely, spectrometers, X-ray fluorescence analyzers and spectrometers, diffractometers, X-ray diffractometers and wafer analyzers, neutron activation analyzers, pulsed fast and thermal neutron activation analyzers; analytical apparatus for use in analyzing samples of composites for use in scientific, industrial and laboratory applications, namely, X-ray diffraction and spectrometry apparatus, diffractometers, X-ray diffractometers, X-ray analysers, X-ray fluorescence spectrometers, wafer analysers, X-ray tubes; materials characterization apparatus, namely, scientific and measuring apparatus and instruments, namely, spectrometers, X-ray fluorescence analyzers and spectrometers, diffractometers, X-ray diffractometers and wafer analyzers; X-ray apparatus not for medical use; analytical, process control and measuring apparatus, namely, reflectometers, spectrometers, X-ray fluorescence analyzers and X-ray diffraction meters; analytical, process control and measuring apparatus, namely, reflectometers, spectrometers, X-ray fluorescence analyzers and X-ray diffraction meters for the cement, steel, aluminium, petrochemicals, industrial minerals, glass and polymers industry, and to customers in research and development institutions; metrology tools, namely, reflectometers, spectrometers, X-ray fluorescence analyzers and X-ray diffraction meters; reflectometers, spectrometers, X-ray fluorescence analyzers and X-ray diffraction meters for both silicon and compound semiconductor applications; X-ray fluorescence wafer and disc analyzers; X-ray fluorescence wafer and disc analyzers for the silicon semiconductor industry, for analyzing film thickness, composition and density; X-ray diffraction instruments, namely, X-ray diffraction meters for the compound semiconductor industry; X-ray tubes, not for medical purposes; X-ray detectors; laboratory equipment, namely, crucibles, flasks, stirrers, Petri dishes, electrodes; laboratory apparatus, namely, scales, mechanical dispensers, robots, namely, robots for weighing and dosing samples and dispensing the flux for use in analysis by X-ray Fluorescence analysis (XRF), Atomic Absorption analysis (AA), Inductively Coupled Plasma analysis (ICP) and wet chemistry analysis for the ceramic, cement, steel, aluminium, glass, polymer, mining, lime, bauxite, ferroalloy, pure metal, catalyst, geology and mineral prospecting, petroleum and oil industries; gas and electric automatic fusion apparatuses, namely, laboratory robots, namely, robots for use in X-ray Fluorescence analysis (XRF), Atomic Absorption analysis (AA), Inductively Coupled Plasma analysis (ICP) and wet chemistry analysis for the ceramic, cement, steel, aluminium, glass, polymer, mining, lime, bauxite, ferroalloy, pure metal, catalyst, geology and mineral prospecting, petroleum and oil industries; electric fusion instruments, namely, automatic fluxer for sample fusing in the cement, lime, carbonate, ceramic, glass, slag, refractory, mining and geological, silicate, clay, ores, sulphide, fluoride, bauxite, aluminium, catalyst, polymer, pigment, steel, pure metal, ferroalloy, non-ferrous alloy and pharmaceutical industries; laboratory weighing apparatus and instruments and balances; apparatus for separating and preparing samples, suspensions, sprays, and emulsions of particles for use with any of the aforesaid goods, namely, gel permeation chromatography, sample dispersion units, stirred cells, autosamplers, dry powder feeders, dispensers, auto titrators, nebulizers, ultrasonic baths, and temperature controllers; instrument controllers, namely, computers, digital signal processors and microprocessors, computer printers; machine readable data carriers, namely, solid state memory devices, optical or magnetic storage media disks, magnetic tapes, all sold pre-programmed with control or analysis programs for use with the all of the aforesaid goods; computer software and hardware for controlling and operating all of the aforesaid goods and for analysing measurements made by all of the aforesaid goods; computer software for use in relation to the standardless analysis of samples; parts and fittings for all the aforesaid goods Scientific and technological services, namely, scientific laboratory services, and research and design relating thereto; consultancy, advisory, and data analytics, and laboratory services related to scientific and industrial instruments and components thereof; scientific laboratory services; laboratory analysis, testing, and research all in the field of materials analysis, industrial process control and optimisation; science and technology services, namely, scientific research in the field of measurement of weight, chemical composition, size, shape, structure, concentration and characteristics of particles, molecules and macromolecules; scientific and technological analytics in the field of measurement of weight, chemical composition, size, shape, structure, concentration and characteristics of particles, molecules and macromolecules; industrial analysis and research services in the field of materials analysis, industrial process control and optimisation; leasing and rental services in the field of laboratory apparatus and equipment; the leasing and rental of scientific and measuring apparatus and instruments; the design of scientific and measuring apparatus and instruments; design, development and programming of computer hardware and software; testing of laboratory apparatus and equipment, authentication in the field of materials analysis, and quality control for others; information and consultancy services all relating to the aforesaid

54.

Method and system for reduction of influence of baseline distortion in absorption spectroscopy measurements

      
Numéro d'application 15355058
Numéro de brevet 10234378
Statut Délivré - en vigueur
Date de dépôt 2016-11-18
Date de la première publication 2017-05-18
Date d'octroi 2019-03-19
Propriétaire Servomex Group Limited (Royaume‑Uni)
Inventeur(s)
  • Alizadeh, Bahram
  • Hobby, James
  • Lopez, Martin
  • Gaskin, Ian

Abrégé

A method and system for reducing the effect of distortions on the baseline signal in an absorption spectroscopy system used for the detection or measurement of chemical species in a medium, whereby one or more correlations or convolutions are performed on the signal using a kernel function. The shape of the kernel function is chosen to reduce the influence of the baseline distortions on the processed measurand determination. The kernel function may also be chosen to enhance the absorption signal.

Classes IPC  ?

  • G01N 21/3504 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique en utilisant la lumière infrarouge pour l'analyse des gaz, p.ex. analyse de mélanges de gaz
  • G01N 21/27 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en utilisant la détection photo-électrique
  • G01N 21/39 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique en utilisant des lasers à longueur d'onde réglable
  • G01J 3/28 - Etude du spectre
  • G01J 3/433 - Spectrométrie par modulation; Spectrométrie par dérivation

55.

DOCTOR BLADE, INKING ARRANGEMENT AND USE OF DOCTOR BLADE IN FLEXOGRAPHIC PRINTING

      
Numéro de document 03003224
Statut Délivré - en vigueur
Date de dépôt 2016-11-04
Date de disponibilité au public 2017-05-11
Date d'octroi 2022-09-13
Propriétaire BTG ECLEPENS S.A. (Suisse)
Inventeur(s) Claudon, Alexandre

Abrégé

A doctor blade (5, 7) for contact with an anilox roller (15) comprises a flat, elongate base element having a thickness of less than about 0.3 mm, which, along a longitudinal region of the doctor blade adapted for contact with said anilox roller, is provided with a coating (43). The coating comprises a metal matrix and at least about 65 % by weight of one or more ceramic(s). The coating comprises 0 to 65 % by weight of chromium carbide. An inking arrangement comprises an anilox roller and a doctor blade. A doctor blade is used in flexographic printing.

Classes IPC  ?

  • B41F 31/04 - Conduits, réservoirs, dispositifs d'alimentation ou de réglage du débit avec des lames d'encriers ou des dispositifs analogues de réglage du débit
  • B41N 10/00 - Blanchets ou habillages similaires; Habillages pour essuyeurs pour impression en creux
  • D21G 3/00 - Raclettes

56.

DOCTOR BLADES, INKING ARRANGEMENT AND USE OF DOCTOR BLADE IN FLEXOGRAPHIC PRINTING

      
Numéro d'application EP2016076692
Numéro de publication 2017/077048
Statut Délivré - en vigueur
Date de dépôt 2016-11-04
Date de publication 2017-05-11
Propriétaire BTG ECLÉPENS S.A. (Suisse)
Inventeur(s) Claudon, Alexandre

Abrégé

Doctor blades (5, 7) for contact with an anilox roller (15) comprise a flat, elongate base element, which, along a longitudinal region of the doctor blade adapted for contact with said anilox roller, is provided with a coating (43). The coating comprises a metal matrix and at least about 65 % by weight of a ceramic or at least about 65 % by weight of chromium carbide. An inking arrangement comprises an anilox roller and a doctor blade. A doctor blade is used in flexographic printing.

Classes IPC  ?

  • B41F 31/04 - Conduits, réservoirs, dispositifs d'alimentation ou de réglage du débit avec des lames d'encriers ou des dispositifs analogues de réglage du débit
  • B41N 10/00 - Blanchets ou habillages similaires; Habillages pour essuyeurs pour impression en creux
  • D21G 3/00 - Raclettes

57.

DOCTOR BLADE, INKING ARRANGEMENT AND USE OF DOCTOR BLADE IN FLEXOGRAPHIC PRINTING

      
Numéro d'application EP2016076697
Numéro de publication 2017/077053
Statut Délivré - en vigueur
Date de dépôt 2016-11-04
Date de publication 2017-05-11
Propriétaire BTG ECLÉPENS S.A. (Suisse)
Inventeur(s) Claudon, Alexandre

Abrégé

A doctor blade (5, 7) for contact with an anilox roller (15) comprises a flat, elongate base element having a thickness of less than about 0.3 mm, which, along a longitudinal region of the doctor blade adapted for contact with said anilox roller, is provided with a coating (43). The coating comprises a metal matrix and at least about 65 % by weight of one or more ceramic(s). The coating comprises 0 to 65 % by weight of chromium carbide. An inking arrangement comprises an anilox roller and a doctor blade. A doctor blade is used in flexographic printing.

Classes IPC  ?

  • B41F 31/04 - Conduits, réservoirs, dispositifs d'alimentation ou de réglage du débit avec des lames d'encriers ou des dispositifs analogues de réglage du débit
  • B41N 10/00 - Blanchets ou habillages similaires; Habillages pour essuyeurs pour impression en creux
  • D21G 3/00 - Raclettes

58.

MDRS

      
Numéro de série 87442224
Statut Enregistrée
Date de dépôt 2017-05-09
Date d'enregistrement 2019-05-07
Propriétaire Malvern Instruments Limited (Royaume‑Uni)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

Scientific instruments and apparatus for particle analysis, namely, the measurement of weight, chemical composition, size, shape, structure, concentration and characteristics of particles, molecules and macromolecules and replacement parts therefor; scientific instruments and apparatus for particle analysis, namely, performing optical image analysis, for the measurement weight, size, shape, structure, concentration and characteristics of particles, molecules and macromolecules and replacement parts therefor; computer software for controlling and operating all of the aforesaid goods and for analyzing measurements made by all of the aforesaid goods

59.

CUVETTE CARRIER

      
Numéro d'application GB2016052924
Numéro de publication 2017/051161
Statut Délivré - en vigueur
Date de dépôt 2016-09-20
Date de publication 2017-03-30
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s) Corbett, Jason

Abrégé

A cuvette carrier (100) comprising: a plurality of walls (101) defining a holding volume (102) for a cuvette (109); a first (103) and second (104) transmissive region included in the plurality of walls (101); and a first optical polariser (103) arranged to polarise light passing through the first transmissive region (103).

Classes IPC  ?

  • G01N 21/03 - Dispositions ou appareils pour faciliter la recherche optique - Détails de structure des cuvettes
  • B01L 9/06 - Supports de tubes à essai; Porte-tubes à essai
  • G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules
  • G01N 21/51 - Dispersion, c. à d. réflexion diffuse dans un corps ou dans un fluide à l'intérieur d'un récipient, p.ex. dans une ampoule

60.

METHOD AND APPARATUS FOR DETERMINING DIFFUSION PROPERTIES OF A SAMPLE

      
Numéro d'application GB2016052025
Numéro de publication 2017/006107
Statut Délivré - en vigueur
Date de dépôt 2016-07-05
Date de publication 2017-01-12
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Barker Née Leszczyszyn, Oksana
  • Latunde-Dada, Seyi
  • Bott, Rachel
  • Hampton, Karl

Abrégé

A method of determining a relationship between a mutual diffusion co-efficient Dm and the concentration c of a solute within a solvent. The method comprises: obtaining a Taylorgram ( 100) comprising a plurality of measurements of solute concentration c; and deriving from the Taylorgram (200) a plurality of mutual diffusion coefficient values Dm corresponding with a plurality of different concentrations c of solute in the solvent.

Classes IPC  ?

  • G01N 15/06 - Recherche de la concentration des suspensions de particules
  • G01N 35/08 - Analyse automatique non limitée à des procédés ou à des matériaux spécifiés dans un seul des groupes ; Manipulation de matériaux à cet effet en utilisant un courant d'échantillons discrets circulant dans une canalisation, p.ex. analyse à injection dans un écoulement

61.

Heterogeneous fluid sample characterization

      
Numéro d'application 15120513
Numéro de brevet 09939362
Statut Délivré - en vigueur
Date de dépôt 2015-02-20
Date de la première publication 2016-12-08
Date d'octroi 2018-04-10
Propriétaire Malvern Instruments Limited (Royaume‑Uni)
Inventeur(s)
  • Lewis, E. Neil
  • Mccaffrey, John
  • Patil, Vishal
  • Haber, Kenneth

Abrégé

The invention relates to methods and apparatus for detecting properties of heterogeneous samples, including detecting properties of particles or fluid droplets in industrial processes. Embodiments disclosed include a particle characterization method, comprising: providing a fluid containing suspended particles; causing at least a first subset of the suspended particles to flow past a first two-dimensional array detector (24); illuminating the first subset of suspended particles as they flow past the first two-dimensional array detector (24) in the fluid; acquiring a plurality of images of the first subset of particles as they flow past the first two-dimensional array detector (24) in the fluid; and automatically counting the particles in the images.

Classes IPC  ?

  • G01N 1/00 - Echantillonnage; Préparation des éprouvettes pour la recherche
  • G01N 15/14 - Recherche par des moyens électro-optiques
  • B07C 5/342 - Tri en fonction d'autres propriétés particulières selon les propriétés optiques, p.ex. la couleur
  • G01N 15/10 - Recherche de particules individuelles
  • G01N 15/00 - Recherche de caractéristiques de particules; Recherche de la perméabilité, du volume des pores ou de l'aire superficielle effective de matériaux poreux

62.

Device for monitoring wear on overhead lines

      
Numéro d'application 15034993
Numéro de brevet 10126187
Statut Délivré - en vigueur
Date de dépôt 2014-11-07
Date de la première publication 2016-12-01
Date d'octroi 2018-11-13
Propriétaire Hottinger Baldwin Messtechnik GmbH (Allemagne)
Inventeur(s) Viel, Wolfgang

Abrégé

A device for measuring force and for monitoring wear on overhead lines includes a force-measuring system which includes two contact bars which, in an operating state, are oriented at a right angle to an overhead line to be monitored, and two connection bars, which, in the operating state, are oriented parallel to the overhead line. A bar-shaped force transducer is fastened to each end portion of the two connection bars and each of the bar-shaped force transducers extends in an axial direction of the respective connection bar.

Classes IPC  ?

  • G01L 1/24 - Mesure des forces ou des contraintes, en général en mesurant les variations des propriétés optiques du matériau quand il est soumis à une contrainte, p.ex. par l'analyse des contraintes par photo-élasticité
  • B60L 5/20 - Collecteurs de courant pour lignes d'alimentation en énergie sur les véhicules propulsés électriquement utilisant des collecteurs en forme d'arc en contact avec le câble du trolley - Détails du contact de l'arc
  • B60L 5/22 - Organes de support pour l'arc de contact
  • G01L 5/10 - Appareils ou procédés pour la mesure des forces, du travail, de la puissance mécanique ou du couple, spécialement adaptés à des fins spécifiques pour la mesure de la tension dans les éléments flexibles, p.ex. dans les cordages, les câbles, les fils métalliques, les filaments, les courroies ou les bandes en utilisant des moyens électriques
  • G01D 5/353 - Moyens mécaniques pour le transfert de la grandeur de sortie d'un organe sensible; Moyens pour convertir la grandeur de sortie d'un organe sensible en une autre variable, lorsque la forme ou la nature de l'organe sensible n'imposent pas un moyen de conversion déterminé; Transducteurs non spécialement adaptés à une variable particulière utilisant des moyens optiques, c. à d. utilisant de la lumière infrarouge, visible ou ultraviolette avec atténuation ou obturation complète ou partielle des rayons lumineux les rayons lumineux étant détectés par des cellules photo-électriques en modifiant les caractéristiques de transmission d'une fibre optique

63.

HOUSING FOR ELECTRONIC CIRCUIT BOARDS

      
Numéro d'application DE2016000201
Numéro de publication 2016/180395
Statut Délivré - en vigueur
Date de dépôt 2016-05-10
Date de publication 2016-11-17
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s) Wollbeck, Joachim

Abrégé

The invention relates to a housing structure for electronic circuit boards and particularly to a housing structure in which high and low voltage components are arranged. The housing structure comprises a housing (1) with a rectangular cross-section for receiving electronic circuit boards (2), in which predetermined sections (1b) of the housing (1) conduct light, these sections (1b) comprise light inlet surfaces and light outlet surfaces, the light inlet surfaces are associated with optical transmitters (3) and the light outlet surfaces are associated with optical receivers (4), and the optical transmitters (3) and optical receivers (4) are connected to a circuit board (2) such that signals may pass.

Classes IPC  ?

  • H05K 7/14 - Montage de la structure de support dans l'enveloppe, sur cadre ou sur bâti

64.

PLUG-IN CONNECTOR STRUCTURE FOR ELECTRONIC PRINTED CIRCUIT BOARDS

      
Numéro d'application DE2016000200
Numéro de publication 2016/180394
Statut Délivré - en vigueur
Date de dépôt 2016-05-10
Date de publication 2016-11-17
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s) Wollbeck, Joachim

Abrégé

The invention relates to a plug-in connector structure for printed circuit boards having high long term stability with very precise measurements. Said aim is achieved by means of a plug-in connector structure with the following characteristics: an insulation plate firmly arranged on the at least one side of a metal layer; at least one flat contact element with two end sections, the first end section being designed as a securing section, and being connected to the metallic layer by means of an electrically conductive connecting material. The second end section is designed as a rigid contact tongue which protrudes over the edge of the insulation plate. The counter-piece is a plug-in device connected to a cable provided for plugging into the contact tongue, said plug-in device being provided with at least two elastic spring tongues which are curved on the end sections thereof such that the convex sides are arranged directly opposite and are in contact with the rigid contact tongue on both sides, due the mechanical stress when the connector is in the plugged-in state The two spring tongues have the same load deflection curve. The connector is also provided with a mechanical guide system enabling the incurved spring tongues to slide in a centered manner on the contact tongue.

Classes IPC  ?

  • H01R 12/57 - Connexions fixes pour circuits imprimés rigides ou structures similaires caractérisées par les bornes bornes pour le montage en surface
  • H01R 12/75 - Dispositifs de couplage pour circuits imprimés rigides ou structures similaires se raccordant à des câbles à l'exclusion des câbles plats ou à rubans
  • H01R 13/11 - Alvéoles élastiques

65.

Calibration of instruments

      
Numéro d'application 15037888
Numéro de brevet 09909970
Statut Délivré - en vigueur
Date de dépôt 2014-11-07
Date de la première publication 2016-10-06
Date d'octroi 2018-03-06
Propriétaire Malvern Instruments Limited (Royaume‑Uni)
Inventeur(s)
  • Hole, John Patrick
  • Smith, Jonathan Benjamin Kendall
  • Wilson, Ian John
  • Malloy, Andrew Paul

Abrégé

Disclosed is a method of calibrating apparatus for optically characterizing samples of particles of small size. Also disclosed is a method of estimating the concentration of particles in a population of small size particles.

Classes IPC  ?

  • G01J 3/28 - Etude du spectre
  • G01N 15/06 - Recherche de la concentration des suspensions de particules
  • G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules
  • G01N 1/28 - Préparation d'échantillons pour l'analyse
  • G01N 33/483 - Analyse physique de matériau biologique
  • G01N 15/00 - Recherche de caractéristiques de particules; Recherche de la perméabilité, du volume des pores ou de l'aire superficielle effective de matériaux poreux
  • B82Y 35/00 - Procédés ou appareils pour la mesure ou l’analyse des nanostructures

66.

MULTICOMPONENT MODEL PARAMETERISATION

      
Numéro d'application GB2016050841
Numéro de publication 2016/151331
Statut Délivré - en vigueur
Date de dépôt 2016-03-24
Date de publication 2016-09-29
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Latunde-Dada, Seyi
  • Leszczyszyn, Oksana
  • Hampton, Karl
  • Bott, Rachel

Abrégé

A method of estimating a parameter for fitting a multi-component Taylorgram model (603, 604, 605, 606) to Taylorgram data g(t) is disclosed. The data (601, 602) comprises a multi-component Taylorgram peak or front at t = tr. The method comprises: evaluating a value of an integration or differential of the data; determining the parameter, based on an analytical expression that includes the value of the integral or differential of the data, the parameter corresponding with a physical property of a sample from which the Taylorgram data was obtained.

Classes IPC  ?

  • G06F 17/18 - Opérations mathématiques complexes pour l'évaluation de données statistiques
  • G01N 13/00 - Recherche des effets de surface ou de couche limite, p.ex. pouvoir mouillant; Recherche des effets de diffusion; Analyse des matériaux en déterminant les effets superficiels, limites ou de diffusion

67.

PRENSCIA

      
Numéro d'application 179338200
Statut Enregistrée
Date de dépôt 2016-07-27
Date d'enregistrement 2022-01-21
Propriétaire HBM United Kingdom Limited (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 16 - Papier, carton et produits en ces matières
  • 41 - Éducation, divertissements, activités sportives et culturelles
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Blank magnetic data carriers, namely blank magnetic discs, blank laser discs, blank optical discs, blank flash memory cards and blank USB flash drives; Blank digital recording media, namely blank CD-ROMs, blank digital audio discs, blank digital audio tapes, and blank secure digital (SD) cards; Pre-recorded magnetic data carriers, namely pre-recorded magnetic discs, pre-recorded laser discs, pre-recorded optical discs, prerecorded flash memory cards, pre-recorded USB flash drives, and pre-recorded digital audio tapes all containing software information for creating, sharing, and running engineering applications in order to analyse processes to identify critical load and stress locations and calculating realistic life expectancy of third-party products and components by performing durability analysis, as well as performing acoustics and vibration analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for the automated storage, analysis and reporting of engineering data related to products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering and information concerning the reliability life data analysis, for accelerated test planning, and for quantitative accelerated life testing data analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for system reliability, availability, maintainability and analysis for building and running complex analyses for any probabilistic and deterministic scenario related to the engineering of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for applying reliability growth models to analyze data from developmental testing and fielded repairable computer systems, network systems, machine systems, mechanical systems, electrical systems and electromechanical systems by observing the failures during the testing of the operation of third-party products and components for critical load and stress test to proactively find and repair durability issues in these products and components to extend their life expectancy as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating reliability prediction statistical analysis based on the major published reliability prediction standards of mathematical formulas for modelling and calculating the failure rate of third-party products and components affected by environmental conditions, construction quality levels, as well as load and stress conditions in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for qualitative analysis and reporting of Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating the Reliability Centered Maintenance analysis approach for creating scheduled maintenance plans for power generation, oil & gas, chemical plants, and manufacturing, for facilitating Risk Based Inspection analysis for oil and gas, chemical and power plants, for creating Maintenance Steering Group compliant maintenance programs for the aircraft and aerospace industries, for implementing and accessing a web-based computer software for reporting failures and faults found in third-party computer systems, network systems, machine systems, mechanical systems, electrical systems, electromechanical systems, equipment, software, and processes, for performing analysis to identify the root cause of these failures and faults, and for identifying, implementing and verifying corrective actions to prevent further recurrence of these failures and faults all in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for implementing a web-based access to Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for use in database management, for running development programs and application programs in a common development environment, for use in database management, for running development programs and application programs in a common development environment, for two and three dimensional simulation for use in design and development of products and components for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network; Blank recording discs, namely blank audio discs, blank floppy discs and blank hard discs, blank compact discs; Blank DVDs;; Pre-recorded recording discs, namely pre-recorded audio discs, pre-recorded floppy discs, and pre-recorded hard discs, pre-recorded compact discs, and pre-recorded DVDs all containing software information for creating, sharing, and miming engineering applications in order to analyse processes to identify critical load and stress locations and calculating realistic life expectancy of third-party products and components by performing durability analysis, as well as performing acoustics and vibration analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for the automated storage, analysis and reporting of engineering data related to products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering and information concerning the reliability life data analysis, for accelerated test planning, and for quantitative accelerated life testing data analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for system reliability, availability, maintainability and analysis for building and running complex analyses for any probabilistic and deterministic scenario related to the engineering of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for applying reliability growth models to analyze data from developmental testing and fielded repairable computer systems, network systems, machine systems, mechanical systems, electrical systems and electromechanical systems by observing the failures during the testing of the operation of third-party products and components for critical load and stress test to proactively find and repair durability issues in these products and components to extend their life expectancy as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating reliability prediction statistical analysis based on the major published standards in the field of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for qualitative analysis and reporting of Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating the Reliability Centered Maintenance analysis approach for creating scheduled maintenance plans for power generation, oil & gas, chemical plants, and manufacturing, for facilitating Risk Based Inspection analysis for oil and gas, chemical and power plants, for creating Maintenance Steering Group compliant maintenance programs for the aircraft and aerospace industry, for implementing and accessing a web-based computer software for reporting failures and faults found in third-party computer systems, network systems, machine systems, mechanical systems, electrical systems, electromechanical systems, equipment, software, and processes, for performing analysis to identify the root cause of these failures and faults, and for identifying, implementing and verifying corrective actions to prevent further recurrence of these failures and faults all in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for implementing a web-based access to Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for use in database management, for running development programs and application programs in a common development environment, for use in database management, for running development programs and application programs in a common development environment, for two and three-dimensional simulation for use in design and development of products and components for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network; Pre-recorded digital recording media, namely pre-recorded CD-ROMs, pre-recorded audio digital discs, pre-recorded digital audio tapes, and pre-recorded secure digital (SD) memory cards all containing software information for creating, sharing, and running engineering applications in order to analyse processes to identify critical load and stress locations and calculating realistic life expectancy of third-party products products and components by performing durability analysis, as well as performing acoustics and vibration analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and information concerning the reliability life data analysis, for accelerated test planning, and for quantitative accelerated life testing data analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for system reliability, availability, maintainability and analysis for building and running complex analyses for any probabilistic and deterministic scenario related to the engineering of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for applying reliability growth models to analyze data from developmental testing and fielded repairable computer systems, network systems, machine systems, mechanical systems, electrical systems and electromechanical systems by observing the failures during the testing of the operation of third-party products and components for critical load and stress test to proactively find and repair durability issues in these products and components to extend their life expectancy as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating reliability prediction statistical analysis based on the major published reliability prediction standards of mathematical formulas for modelling and calculating the failure rate of third-party products and components affected by environmental conditions, construction quality levels, as well as load and stress conditions in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for qualitative analysis and reporting of Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating the Reliability Centered Maintenance analysis approach for creating scheduled maintenance plans for power generation, oil and gas, chemical plants, and manufacturing, for facilitating Risk Based Inspection analysis for oil and gas, chemical and power plants, for creating Maintenance Steering Group compliant maintenance programs for the aircraft and aerospace industry, for implementing and accessing a web-based computer software for reporting failures and faults found in third-party computer systems, network systems, machine systems, mechanical systems, electrical systems, electromechanical systems, equipment, software, and processes, for performing analysis to identify the root cause of these failures and faults, and for identifying, implementing and verifying corrective actions to prevent further recurrence of these failures and faults all in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for implementing a web-based access to Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for use in database management, for running development programs and application programs in a common development environment, for use in database management, for running development programs and application programs in a common development environment, for two and three-dimensional simulation for use in design and development of products and components for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network; Computer software for health and usage monitoring of computer network systems, for operational usage severity and prognostics of computer network systems for use in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network; Computer programs [downloadable software] for creating, sharing, and running engineering applications in order to analyse processes to identify critical load and stress locations and calculating realistic life expectancy of third-party products and components by performing durability analysis, as well as performing acoustics and vibration analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for the automated storage, analysis and reporting of engineering data related to products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering and information concerning the reliability life data analysis, for accelerated test planning, and for quantitative accelerated life testing data analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for system reliability, availability, maintainability and analysis for building and running complex analyses for any probabilistic and deterministic scenario related to the engineering of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for applying reliability growth models to analyze data from developmental testing and fielded repairable computer systems, network systems, machine systems, mechanical systems, electrical systems and electromechanical systems by observing the failures during the testing of the operation of third-party products and components for critical load and stress test to proactively find and repair durability issues in these products and components to extend their life expectancy as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating reliability prediction statistical analysis based on the major published reliability prediction standards of mathematical formulas for modelling and calculating the failure rate of third-party products and components affected by environmental conditions, construction quality levels, as well as load and stress conditions in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for qualitative analysis and reporting of Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating the Reliability Centered Maintenance analysis approach for creating scheduled maintenance plans for power generation, oil and gas, chemical plants, and manufacturing, for facilitating Risk Based Inspection analysis for oil and gas, chemical and power plants, for creating Maintenance Steering Group compliant maintenance programs for the aircraft and aerospace industry, for implementing and accessing a web-based computer software for reporting failures and faults found in third-party computer systems, network systems, machine systems, mechanical systems, electrical systems, electromechanical systems, equipment, software, and processes, for performing analysis to identify the root cause of these failures and faults, and for identifying, implementing and verifying corrective actions to prevent further recurrence of these failures and faults all in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for use in database management, for running development programs and application programs in a common development environment, for two and three-dimensional simulation for use in design and development of products and components for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network; Computer software applications, downloadable, for creating, sharing, and running engineering applications in order to analyse processes to identify critical load and stress locations and calculating realistic life expectancy of third-party products and components by performing durability analysis, as well as performing acoustics and vibration analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for the automated storage, analysis and reporting of engineering data related to products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering and information concerning the reliability life data analysis, for accelerated test planning, and for quantitative accelerated life testing data analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for system reliability, availability, maintainability and analysis for building and running complex analyses for any probabilistic and deterministic scenario related to the engineering of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for applying reliability growth models to analyze data from developmental testing and fielded repairable computer systems, network systems, machine systems, mechanical systems, electrical systems and electromechanical systems by observing the failures during the testing of the operation of third-party products and components for critical load and stress test to proactively find and repair durability issues in these products and components to extend their life expectancy as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating reliability prediction statistical analysis based on the major published reliability prediction standards of mathematical formulas for modelling and calculating the failure rate of third-party products and components affected by environmental conditions, construction quality levels, as well as load and stress conditions in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for qualitative analysis and reporting of Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating the Reliability Centered Maintenance analysis approach for creating scheduled maintenance plans for power generation, oil and gas, chemical plants, and manufacturing, for facilitating Risk Based Inspection analysis for oil and gas, chemical and power plants, for creating Maintenance Steering Group compliant maintenance programs for the aircraft and aerospace industry, for implementing and accessing a web-based computer software for reporting failures and faults found in third-party computer systems, network systems, machine systems, mechanical systems, electrical systems, electromechanical systems, equipment, software, and processes, for performing analysis to identify the root cause of these failures and faults, and for identifying, implementing and verifying corrective actions to prevent further recurrence of these failures and faults all in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for use in database management, for running development programs and application programs in a common development environment, for two and three-dimensional simulation for use in design and development of products and components for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network. (2) Handbooks [manuals] (1) Education services, namely providing classes, courses, seminars and workshops in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of automotive , ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Providing training in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Practical training services, namely providing educational demonstrations in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Arranging and conducting of seminars in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace engineering, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Arranging and conducting of symposiums in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Arranging and conducting of workshops in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering, automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing. (2) Scientific and technological services, namely scientific research, technical consulting, development and testing of embedded software and electronics, and providing quality 'assurance all in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Software design and development; Cloud computing, namely cloud computing providing software for creating, sharing, and running engineering applications in order to analyse processes to identify critical load and stress locations and calculating realistic life expectancy of third-party products and components by performing durability analysis, as well as performing acoustics and vibration analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for the automated storage, analysis and reporting of engineering data related to products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering and information concerning the reliability life data analysis, for accelerated test planning, and for quantitative accelerated life testing data analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for system reliability, availability, maintainability and analysis for building and running complex analyses for any probabilistic and deterministic scenario related to the engineering of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for applying reliability growth models to analyze data from developmental testing and fielded repairable computer systems, network systems, machine systems, mechanical systems, electrical systems and electromechanical systems by observing the failures during the testing of the operation of third-party products and components for critical load and stress test to proactively find and repair durability issues in these products and components to extend their life expectancy as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating reliability prediction statistical analysis based on the major published reliability prediction standards of mathematical formulas for modelling and calculating the failure rate of third-party products and components affected by environmental conditions, construction quality levels, as well as load and stress conditions in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for qualitative analysis and reporting of Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating the Reliability Centered Maintenance analysis approach for creating scheduled maintenance plans for power generation, oil & gas, chemical plants, and manufacturing, for facilitating Risk Based Inspection analysis for oil and gas, chemical and power plants, for creating Maintenance Steering Group compliant maintenance programs for the aircraft and aerospace industry, for implementing and accessing a web-based computer software for reporting failures and faults found in third-party computer systems, network systems, machine systems, mechanical systems, electrical systems, electromechanical systems, equipment, software, and processes, for performing analysis to identify the root cause of these failures and faults, and for identifying, implementing and verifying corrective actions to prevent further recurrence of these failures and faults all in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for implementing a web-based access to Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for use in database management, for running development programs and application programs in a common development environment, for two and three-dimensional simulation for use in design and development of products and components automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network; Computer programming; Computer software design; Rental of computer software; Computer software consultancy; Computer programs and document data conversion from one media format to another; Electronic data storage, namely cloud computing provider services for general storage of data; Engineering services, namely engineering surveying services, and aerospace, chemical, civil, electrical, genetic, geotechnical, mechanical, nuclear, and sanitation engineering services; Providing information on computer technology and programming via a web site; Installation of computer software; Maintenance of computer software; Monitoring of computer systems by remote access; Off-site data backup, namely off-site data backup storage of electronic records for others; Research and development of new products for others; Outsource service providers in the field of information technology, namely outsource service providers in the fields of providing quality assurance in the field of computer software, computer software consultancy, computer hardware consultancy, and computer programming; Research and development of new products for others; Software as a service [SaaS] provider in the field of software for creating, sharing, and running engineering applications in order to analyse processes to identify critical load and stress locations and calculating realistic life expectancy of third-party products and components by performing durability analysis, as well as performing acoustics and vibration analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for the automated storage, analysis and reporting of engineering data related to products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering and information concerning the reliability life data analysis, for accelerated test planning, and for quantitative accelerated life testing data analysis of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for system reliability, availability, maintainability and analysis for building and running complex analyses for any probabilistic and deterministic scenario related to the engineering of products and components designed for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for applying reliability growth models to analyze data from developmental testing and fielded repairable computer systems, network systems, machine systems, mechanical systems, electrical systems and electromechanical systems by observing the failures during the testing of the operation of third-party products and components for critical load and stress test to proactively find and repair durability issues in these products and components to extend their life expectancy as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating reliability prediction statistical analysis based on the major published reliability prediction standards of mathematical formulas for modelling and calculating the failure rate of third-party products and components affected by environmental conditions, construction quality levels, as well as load and stress conditions in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for qualitative analysis and reporting of Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for facilitating the Reliability Centered Maintenance analysis approach for creating scheduled maintenance plans for power generation, oil and gas, chemical plants, and manufacturing, for facilitating Risk Based Inspection analysis for oil and gas, chemical and power plants, for creating Maintenance Steering Group compliant maintenance programs for the aircraft and aerospace industry, for implementing and accessing a web-based computer software for reporting failures and faults found in third-party computer systems, network systems, machine systems, mechanical systems, electrical systems, electromechanical systems, equipment, software, and processes, for performing analysis to identify the root cause of these failures and faults, and for identifying, implementing and verifying corrective actions to prevent further recurrence of these failures and faults all in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for implementing a web-based access to Failure Mode and Effects Analysis data to determine potential malfunctions and identify all possible failures in third-party architectural and industrial designs, in third-party manufacturing and assembly processes, and in third-party products and components, as used in automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, for use in database management, for running development programs and application programs in a common development environment, for two and three-dimensional simulation for use in design and development of products and components for automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and for use in providing multiple user access to a global computer information network; Technical research in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of, automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Technical project studies in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering, in the fields of automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Technological consultancy in the fields of computer science, computer software, computer hardware, computer programming, computer, product and civil engineering in the fields of, automotive, ground vehicle transportation, aircraft transportation, watercraft transportation, aerospace, national military defense, telecommunication electrical engineering, telecommunication computer engineering, sound engineering, computer systems development, power generation, oil and gas, chemical and structural engineering, and material testing; Material testing; Updating of computer software.

68.

SUSPENDED PARTICLE CHARACTERIZATION SYSTEM

      
Numéro d'application GB2015053010
Numéro de publication 2016/066992
Statut Délivré - en vigueur
Date de dépôt 2015-10-13
Date de publication 2016-05-06
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Mccaffrey, John
  • Dahl, Kevin
  • Bennett, Peter
  • Patil, Vishal
  • Lewis, E. Neil

Abrégé

An apparatus (10) for characterizing particles, comprising: a microscope objective with an optical axis and a depth of field; a holder cell (22) configured to position the particles in a generally planar volume below the microscope objective, the planar volume being substantially normal to the optical axis and having a depth that is less than or equal to the depth of field, wherein a portion of the cell holder (22) for positioning in the optical axis of the microscope objective is substantially free of significant spectral features in a Raman spectral range; an x-y stage (20) to move the microscope objective relative to the holder cell (22) in x and y directions to align particles with the optical axis of the microscope objective while the particles are held by the holder cell (22), a detector ( 18) for acquiring an image of a particle through the microscope objective, a laser operable to illuminate a particle held by the holder cell (22), a Raman spectrometer ( 16) arranged to obtain a spectrum including the Raman spectral range from the illuminated particle, and characterizing logic operative to characterize the particle based on image processing operations performed on the acquired image and based on the Raman spectrum. The holder cell (22) comprises a first plate (34) and a second plate (36) that are separated by a predetermined distance defining the planar volume depth.

Classes IPC  ?

  • G01N 15/14 - Recherche par des moyens électro-optiques
  • G01N 21/88 - Recherche de la présence de criques, de défauts ou de souillures
  • G01N 21/65 - Diffusion de Raman
  • B01L 3/00 - Récipients ou ustensiles pour laboratoires, p.ex. verrerie de laboratoire; Compte-gouttes

69.

A PARTICLE CHARACTERIZATION METHOD AND APPARATUS

      
Numéro d'application GB2015052574
Numéro de publication 2016/034902
Statut Délivré - en vigueur
Date de dépôt 2015-09-07
Date de publication 2016-03-10
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s) Corbett, Jason Cecil William

Abrégé

A particle characterisation apparatus (300) is disclosed comprising: a sample cell (110) for holding a sample (150), a light source (302) for producing a light beam (106) for illuminating the sample (150) in the sample cell (110), thereby producing scattered light by the interaction of the light beam (106) with the sample (150); a focussing lens (130) for focussing the light beam (106) within the sample (150); and a detector (306) for detecting the backscattered light along a detection optical path (108) that intersects the focussed light beam (106) within the sample (150). The intersection of the light beam (106) and the detection optical path (108) in the sample define a detection region (120). The apparatus comprises an optical arrangement for varying the volume of the detection region (120).

Classes IPC  ?

  • G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules
  • G01N 21/51 - Dispersion, c. à d. réflexion diffuse dans un corps ou dans un fluide à l'intérieur d'un récipient, p.ex. dans une ampoule
  • G01N 15/00 - Recherche de caractéristiques de particules; Recherche de la perméabilité, du volume des pores ou de l'aire superficielle effective de matériaux poreux
  • G01N 21/47 - Dispersion, c. à d. réflexion diffuse

70.

Alignment device and transmitter/receiver system with two angular degrees of freedom

      
Numéro d'application 14811937
Numéro de brevet 11119290
Statut Délivré - en vigueur
Date de dépôt 2015-07-29
Date de la première publication 2016-02-11
Date d'octroi 2021-09-14
Propriétaire SERVOMEX GROUP LIMITED (USA)
Inventeur(s)
  • Gaskin, Ian C.
  • Hobby, James D.
  • Kovacich, Richard P.
  • Lopez, Martin
  • Terry, Graham R.

Abrégé

An alignment device having two angular degrees of freedom is provided. The alignment device is adjustable such that it is suitable for aligning a first apparatus with respect to a second apparatus. The first apparatus may emit one or more of electromagnetic waves, acoustic waves and matter towards the second apparatus and for detection by the second apparatus. The first and second apparatuses may be disposed in a harsh environment such as is found in the vicinity of an industrial process stack. In some embodiments the first apparatus is a laser, preferably a tunable diode laser, and the second apparatus is a receiver incorporating a detector. In these embodiments the apparatuses may be used to perform laser absorption spectroscopy on a process gas flowing through an industrial process stack.

Classes IPC  ?

  • G01N 21/49 - Dispersion, c. à d. réflexion diffuse dans un corps ou dans un fluide
  • G02B 7/00 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques
  • G01J 3/02 - Spectrométrie; Spectrophotométrie; Monochromateurs; Mesure de la couleur - Parties constitutives
  • G01J 3/42 - Spectrométrie d'absorption; Spectrométrie à double faisceau; Spectrométrie par scintillement; Spectrométrie par réflexion
  • G01B 11/27 - Dispositions pour la mesure caractérisées par l'utilisation de techniques optiques pour tester l'alignement des axes pour tester l'alignement des axes
  • G01N 21/39 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique en utilisant des lasers à longueur d'onde réglable
  • G02B 27/00 - Systèmes ou appareils optiques non prévus dans aucun des groupes ,
  • G02B 27/62 - Appareils optiques spécialement adaptés pour régler des éléments optiques pendant l'assemblage de systèmes optiques
  • G02B 7/02 - Montures, moyens de réglage ou raccords étanches à la lumière pour éléments optiques pour lentilles

71.

SPECTRIS

      
Numéro d'application 176327000
Statut Enregistrée
Date de dépôt 2016-01-13
Date d'enregistrement 2023-05-31
Propriétaire Spectris PLC (Royaume‑Uni)
Classes de Nice  ?
  • 07 - Machines et machines-outils
  • 09 - Appareils et instruments scientifiques et électriques
  • 12 - Véhicules; appareils de locomotion par terre, par air ou par eau; parties de véhicules
  • 35 - Publicité; Affaires commerciales
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Industrial automation and control equipment namely sensors and related computer hardware and software for use in measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions, and replacement parts therefor; electronic components for use in industrial measurement and control hardware applications namely sensors, signal conditioners and regulators namely used to control and regulate material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; computer software for controlling and operating industrial automation and control equipment for use in the measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; laboratory data sensors namely electronic and manual sensors for use in the measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions in non-medical laboratory, commercial and industrial environments; computer software for controlling and operating industrial automation and process control equipment used in non-medical laboratory, industrial and commercial process environments in applications for measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; material testing instruments and apparatus for use in measuring, regulating, weighing, control, monitoring and signaling applications namely rheometers, viscometers, particle detectors and spectrometers; x-ray analysers for use in non-medical applications, namely x-ray apparatus for use in x-ray diffraction, x-ray fluorescence, photoluminescence and opto-acoustical measurement analytics and testing applications; x-ray apparatus for use in non-medical measurement, analytics and testing applications namely x-ray diffractometers and wafer analyzers, neutron activation analyzers, pulsed fast and thermal neutron activation analyzers and ellipsometrical and reflectometrical x-ray apparatus and instruments; spectroscopes; x-ray spectroscopy apparatus for non-medical use; replacement parts for non-medical x-ray spectroscopy apparatus namely x ray tubes; x-ray machines for use in measuring, regulating, weighing, control, monitoring and signaling applications, namely x-ray apparatus for use in composite sample scanning and analysis in scientific, industrial and laboratory applications; imaging apparatus namely sensors, cameras, computers and computer hardware for use in image capture, image processing and image display in applications for measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; particle classifiers namely particle sorting and measurement instruments for measuring particle size, shape, density, structure and composition of airborne particles, fluid borne particles, and particles within a particulate volume; particle counters namely instruments for measuring particle quantity, size, shape distribution and concentration of particles within gaseous, fluid and particulate samples; particle counters for counting of particles within gaseous, fluid and particulate samples; spectroscopes for use in photocorrelation and measurement of the size of sub-micron particles dispersed in a liquid; dynamic light scattering analyzers for use in producing zimm plots to determine the molecular weight of polymers; acoustic spectroscopes to measure sound attenuation and sound velocity as a function of frequency for the measurement of particle size distributions in emulsions and suspensions; laser diffraction spectroscopes; zeta potential analyzers for use in the measurement of particle charge; electrophoretic sampling and analysis hardware, namely electric and electronic electrophoretic mobility analyzers for measuring electrophoretic mobility of particles in samples; particle sampling and analysis hardware, namely particle mobility analyzers for measuring particle mobility of particles in samples; digital pH meters; electrodes and dynamic light scattering analyzers for measuring pH in samples; micro electrophoresis measuring instruments namely vibration meters, vibration sensors, vibration exciters and vibration transducers; electronic equipment testing apparatus namely load cells and strain gauges; X-ray gauges; ultrasonic thickness gauges; ultrasonic liquid level sensors namely liquid level sensors for use in measuring, regulating, weighing, control, monitoring and signaling applications that measure liquid levels in containers using ultrasonic sensors; electronic signal conditioners; signal amplifiers; calibration checkers for acoustic transducers, vibration transducers, sound level meters, and noise dose meters; graduation checkers namely calibration checkers; weighing scales for use in non-medical laboratory, commercial and industrial applications; weight sensors and related weight-sensing computer hardware for measuring weights in non medical laboratory, commercial and industrial applications; seismic detectors; electrical current sensors and electronic hardware current sensing and measuring readers and hardware controllers for use in electrical safety monitoring applications; telecommunications networking equipment namely radio and telecommunication signal transmitters and receivers, and telecommunications network switches; laser measuring instruments in non-medical laboratory, commercial and industrial environments, namely laser measurement sensors with related laser readers and related computer hardware for use in measuring, regulation, control and monitoring of material current, container level, material level, pH, load, vibrations, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating condition applications; lasers for use in industrial and commercial applications, namely as a component of measurement and weighing hardware, regulators, control, monitoring and signaling hardware in measurement, weight measurement, regulation and control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; combustion control analyzers for use in hydrocarbon processing and power generation applications; oxygen, carbon monoxide and carbon dioxide gas analysers for use in safe area and hazardous area applications; coulometric sensors and tuneable diode lasers for use in the industrial gas market, measurement of gas mixtures in metal and mining processing, power generation applications and healthcare applications; bar code scanners; bar code readers; bar code decoders; thermocouples; thermostats for use in the control of operating or environmental temperature on industrial automation and control equipment in non-medical laboratory, industrial and commercial applications; temperature sensors, temperature gauges; thermistors; humidity meters; humidity sensors; infrared detection apparatus for use in measuring, regulating, weighing, control, monitoring and signaling technology applications namely infrared thermometers, infrared scanners, and infrared detection sensors; electric thermostats; pressure sensors; torque sensors; fluid flow and velocity sensors; liquid level sensors; water quality sensors and connected computer hardware for use in water quality testing and monitoring applications; programmable logic controllers (PLCs) for use in industrial automation and control equipment, namely computer hardware operatively connected to electronic and manual sensors which can capture values and readings from the sensors and store them electronically for subsequent extraction or use for use in measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, pH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions and applications; USB [universal serial bus] operating software; data monitoring hardware, namely programmable logic controllers for use in the monitoring of sensor and data inputs and outputs associated with automated processes and machines; video monitors, keyboards, joysticks and mice, for use on testing and control equipment used in industrial measuring, regulating, weighing, control, monitoring and signaling applications; graphic LCD screens, web-connected and all-in-one hardware controllers and ergonomic interfaces, for use in industrial measuring, regulating, weighing, control, monitoring and signaling applications as operator interface terminals that allow user inputs to be translated as signals for machines that in turn provide the required result and output to the user; electronic motion sensors for factory automation, industrial and commercial applications; motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brakes, and packing equipment; Motor drives that control the rotation and motion of electrical motors; stepper motors for precision motion control, and motor contactors equipment; overload relays; manual protectors, and control relays; power switches; meters for use on electrical control panels; digital meters for use on electrical control panels; downloadable electronic publications namely product manuals, handbooks, technical review articles, computer software documentation, product usage case studies, brochures, magazines, encyclopedias, newsletters, product data sheets, CAD models and drawings relating to measuring, regulating, weighing, control, monitoring and signaling equipment, processes and applications; electronic components for use in industrial measurement and control hardware applications such as signal conditioners and regulators namely micro-electronic components used to control and/or regulate current or flow, temperature, humidity, pressure, strain, force, flow, level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, data acquisition, data display, data retrieval, and environmental technology; (1) Business consulting services related to quality assurance services in the field of measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; (2) Scientific research and industrial research in the field of measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; Scientific research and industrial research in the field of pulp and paper processing, sound and vibration analysis and optimisation, manufacturing, heavy industries, petroleum and petrochemical industries, energy industry, aerospace, medical, defense engineering and telephone- and computer-based telecommunications equipment and networks and services; technical consulting and industrial engineering services in the field of measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; technical consulting and industrial engineering services in the field of pulp and paper processing, sound and vibration analysis and optimization and gas analysis; manufacturing, heavy industries, petroleum and petrochemical industries, energy industry, aerospace, medical, defense engineering and telephone- and computer-based telecommunications equipment and networks and services; mechanical, chemical, civil, structural, electronic and electrical engineering services in the field of pulp and paper processing, sound and vibration analysis and optimisation, condition monitoring, manufacturing, heavy industries, petroleum and petrochemical industries, energy industry, aerospace, medical, defense engineering and telecommunications; structural engineering services namely mechanical, chemical, civil, structural, electronic and electrical engineering services related to the building, design or maintenance of structures; providing quality assurance in the field of measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; quality assurance, quality testing and quality control services in the field of measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; environmental and safety testing and monitoring services; testing of environmental noise and noise pollution, monitoring of contaminated land, sampling for contamination monitoring of contaminated land, sampling for contamination; gas analysis; providing remote and onsite industrial process testing and monitoring services related to operations, parameters, safety, and outcomes of industrial processes in the fields of environmental and safety testing; design of computer software; analysis of materials; materials testing and analysing; chemical analysis; chemical analysis services; microseismic measurement services namely vibration analysis; equipment testing and calibration services namely testing and calibration of measurement, sensor, process control and computer equipment used in the field of pulp and paper processing, sound and vibration analysis and optimisation, petroleum and petrochemical industries, energy industry, aerospace, medical, defense engineering telecommunications industries; recordal and analysis of seismic data; quality testing and quality control services in the field of seismic exploration and testing procedures; geo-seismic survey services; creation, maintenance, adaptation and repair of software; rental and installation of software; consulting services in the fields of mechanical, chemical, electronic and electrical engineering of measuring, regulating, weighing, control, monitoring and signaling technology and regarding manufacturing of products and instrumentation for use in measuring, regulating, weighing, control, monitoring and signaling applications; development of computer software applications; development of computer software for internet users; project management in the field of mechanical engineering; technical consultancy in the field of environmental science, chemical environmental safety testing and monitoring, design and development of computer software for use in industrial process monitoring applications, materials and chemical analysis and testing, and blasting, recording of seismic data and geoseismic surveying services, engineering consulting and project management services in the fields of passive seismology, sound and vibration analysis and the measurement of stress and strain; manufacture for others of blasting and vibration equipment, materials analysis equipment, and chemical analysis, measuring or regulating or weighing or control and monitoring and signaling technology for use in industrial applications namely sensors and related hardware and software systems for use in measuring, regulating, weighing, control, monitoring and signaling applications and replacement parts therefor; engineering consulting and project management services manufacture of computer software for controlling and operating industrial automation and control equipment for use in the control of electrical apparatus, sensors and instruments for use in industrial measuring, regulating, weighing, control, monitoring and signaling applications

72.

SPECTRIS

      
Numéro de série 86874116
Statut En instance
Date de dépôt 2016-01-13
Propriétaire Spectris Plc (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Electrical appliances for use in measuring, namely, apparatus for measuring temperature in gases and solid substances and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, appliances for measuring pressure and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, liquid level sensors for measuring level and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, digital force gauges, digital torque gauges and electronic sensors for measuring force and strain and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, soil moisture meters for measuring moisture and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, apparatus for mass spectrometry for measuring molecular structure, weight, particle size and concentration, and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, lasers for measuring texture and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, rheometers for measuring the viscosity of fluids and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, lasers for measuring zeta potential and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical appliances for use in measuring, namely, particle counters for measuring contaminants and parts thereof and fittings therefor including micro-electronic components for said appliances; Electrical apparatus for use in regulating, namely, apparatus for regulating electric current and voltage and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, flow regulators for commercial use for regulating electric flow and material flow, and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, apparatus for regulating material electric current and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, temperature controllers and sensors for regulating temperature and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, electronic controller for regulating humidity in laboratory equipment and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, pressure transducers and sensors for regulating pressure, strain, and force for automotive, aerospace, railway and laboratory equipment and mechanical or electrical sub-systems and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, level switches for regulating container liquid level and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, pH meters for regulating ph load and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, vibration shakers and sensors for regulating vibration and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in regulating, namely, electric sensors for regulating electrical resistance, air velocity, amperage, frequency, ion concentration, conductivity, and environmental operating conditions and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical weighing apparatus and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for the remote control of industrial operations and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electrical apparatus for use in signaling technology, namely, signal conditioners and regulators in the nature of electric sensors and devices and parts thereof and fittings therefor, including micro-electronic components for said apparatus; Electric sensors and parts thereof and fittings therefor including micro-electronic components for said sensors, for use in measuring, regulating, weighing, control, monitoring and signaling technology; recorded computer operating programs for use in measuring, regulating, weighing, control, monitoring and signaling technology; downloadable software for controlling and operating industrial automation and control equipment for use in the control of electrical apparatus, sensors and instruments for use in industrial measuring, regulating, weighing, control, monitoring and signaling applications; measuring instruments, namely, gas analyzers, rheometers, viscometers, particle detectors and spectrometers; detecting instruments, namely, laboratory instrument for the detection of pathogens and toxins in a biological sample for research use; monitoring instruments, namely, monitoring devices for monitoring battery performance characteristics; indicators, namely, digital weighing indicators; controllers, namely, automation wind turbine controller; laboratory instruments other than for medical use, namely, x-ray machines and laser measuring instruments; data collection apparatus, namely, integrated computerized system for the collection of data related to chemical analyses; downloadable software for monitoring, weighing, testing and measuring material and particle characterization; residual gas analyzers; scanners and decoders; testing and quality control devices, namely, gas testing instruments; downloadable software for controlling industrial processes; process control apparatus, namely, signal conditioning and communication devices for industrial process control; process control instruments, namely, signal conditioning and communication devices for industrial process control; material testing instruments and machines, namely, rheometers, viscometers, particle detectors and spectrometers; rheometers for measuring the viscosity and viscoelasticity of fluids; viscometers; Non-medical imaging apparatus, namely, sensors, cameras, computer and computer hardware for use in image capture, image processing and image display in applications for measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph load, vibration, electrical resistance air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; particle detectors; particle detecting apparatus; particle classifying apparatus, namely, cytometers; spectrometers; spectrometry apparatus; X-ray apparatus for industrial purposes; X-ray analyzers, other than for medical use; apparatus and installations for the production of X-rays, not for medical purposes; spectroscopes; X-ray spectroscopy apparatus other than for medical use; X-ray tubes not for medical purposes; vibration detectors; vibration sensors; instruments for measuring vibration; vibration exciters; electrical transducers; transducer apparatus, namely, electrical transducers; testing apparatus for electronic equipment, namely, continuity test apparatus for electrical circuits; portable test apparatus, namely, continuity test apparatus for electrical circuits; load cells; strain gauges; X-ray gauges, namely, digital torque gauges; ultrasonic thickness gauges; ultrasonic sensors; ultrasonic measuring apparatus, namely, distance measuring apparatus; signal conditioners; amplifiers; scientific instrumentation for weight measuring; weighing apparatus and instruments; electronic weighing scales; calibration devices for calibrating ultrasonic testers; calibration checkers, namely graduation checkers; seismic detectors; electrical safety monitoring apparatus in the nature of food safety monitoring devices, namely, thermometers; television transmitters; telecommunication transmitters; telecommunications apparatus and equipment, namely, telecommunication switches; telecommunication networks, namely, telecommunication computer network server; real-time data processing apparatus; lasers for non-medical purposes; laser measuring systems; lasers for industrial use; apparatus for analysing gases; residual gas analysers; bar code scanners; bar code readers; bar code decoders; thermocouples; temperature measuring instruments, namely, temperature sensors; temperature sensors, namely, resistance temperature detectors; thermistors; humidity measuring apparatus; humidity meters; humidity sensors; infrared detectors; infrared detection apparatus; infrared thermometers, not for medical purposes; infrared scanners; infrared sensors; electric control devices for heating management; pressure sensors; instruments for measuring pressure; torque measuring apparatus, namely, torque meters; flow measuring apparatus, namely flow meters; level measuring instruments and apparatus, namely, laser level measuring apparatus; scientific measuring instruments and apparatus for measuring water quality; electronic data loggers and recorders; USB (universal serial bus) operating software; programmable logic controllers; man-machine interfaces, namely, computer interface boards; electronic controls for motors and motion control sensors; electric sensor switches; electric data switches; switches, electric; electric switching apparatus; panel meters, namely, an electronic instrument that displays an input signal in either a digital or analog form; digital panel meters, namely, an electronic instrument that displays an input signal in either a digital or analog form; downloadable computer software relating to the aforesaid for controlling non-medical imaging apparatus; downloadable electronic publications, namely product manuals, handbooks, written technical review articles, documentation, in the form of booklets, research reports featuring product usage case studies, brochures, magazines, encyclopedias, newsletters, product data fact sheets, and illustrated drawings, all in the field of x-ray technology and CAD models; parts and fittings for all the aforesaid; none of the foregoing for use in collecting, analysing or managing client and customer records or for use in relation to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events Scientific, technical and industrial research in the field of sound and vibration, gas analysis and pharmaceutical studies; industrial research in the field of pharmaceutical, electronics, semiconductors, telecommunications, automotive, metals, minerals, mining, and primary and advanced materials; industrial and technological engineering analysis; engineering services; engineering services for the analysis of structures; product quality testing; quality control of goods and services; product quality control testing; quality control certification for others, namely, providing quality assurance services in the field of telecommunications transmitters; quality control services for others, namely, measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; quality control audits for others; consultancy in the field of quality assurance services in the field of infrared sensors; providing quality assurance services in the field of measuring, regulation, control and monitoring of material current, material flow, electrical current, electrical flow, temperature, humidity, pressure, strain, force, flow, container level, material level, ph, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity, and environmental operating conditions; monitoring of computer systems to detect breakdowns; services for monitoring industrial processes for quality control purposes; sampling for contamination, namely, soil sampling for analysis purposes; design of computer software; analysis of materials; materials testing and analyzing; chemical analysis; chemical analysis services; testing the functionality of apparatus; testing of computing equipment; calibration services; measurement services, namely, radiation measurement services; scientific laboratory testing services, namely, laboratory testing services; technical testing services, namely, testing of chemicals; creation, maintenance, adaptation and repair of software; rental and installation of software; engineering consultancy; engineering consultancy relating to manufacture; technological services relating to manufacture, namely, design of computer hardware for the manufacturing industry; development of computer software application solutions; development of software solutions for internet users; gas analyzing services; engineering project management services; environmental consultancy services, namely, technical consultancy in the field of environmental science and chemical environmental safety testing; compiling data for research purposes in the field of environmental protection; environmental consultancy, information and advice related to the aforesaid; providing on-line non-downloadable software for controlling and operating industrial automation and control equipment for use in the control of electrical apparatus, sensors, and instruments for use in measuring, regulating, weighing, control, monitoring and signaling applications; none of the foregoing services relating to the collection, analysis or management of client and customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events

73.

LOAD CELL WITH HYDRAULIC CENTERING DEVICE

      
Numéro d'application DE2015000333
Numéro de publication 2016/000677
Statut Délivré - en vigueur
Date de dépôt 2015-07-01
Date de publication 2016-01-07
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Jäger, Andreas
  • Scherer, Ralf
  • Schlachter, Werner

Abrégé

The invention relates to a load cell with a centering device which improves the force transmission within a load cell, wherein the centering device has the following features: in the deformation body (2), there is provided a cylindrical recess (5) in which there is arranged a force-introducing punch (6) that is in point contact with the floor of the cylindrical recess. The circumferential section (6b) of the force-introducing punch (6) is convex. This section (6b) forms, with the wall surface (5b), an annular gap (7) of width (a) between 0.05 mm and 0.45 mm. The annular gap (7) is at a predetermined distance from the floor surface (5a). A liquid fill (8) is provided in the recess (5). An elastic cover (9) is arranged over the liquid fill (8).

Classes IPC  ?

  • G01G 3/14 - Appareils de pesée caractérisés par l'utilisation d'organes déformables par élasticité, p.ex. balances à ressort dans lesquels l'élément de pesée est constitué par un corps solide soumis à une pression ou une traction pendant la pesée utilisant la mesure des variations de la résistance électrique
  • G01L 1/22 - Mesure des forces ou des contraintes, en général en faisant usage des cellules électrocinétiques, c. à d. des cellules contenant un liquide, dans lesquelles un potentiel électrique est produit ou modifié par l'application d'une contrainte en utilisant des jauges de contrainte à résistance

74.

ESG

      
Numéro d'application 175648600
Statut Enregistrée
Date de dépôt 2015-11-25
Date d'enregistrement 2017-06-08
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

(1) Geophysical instrumentation, namely, geophones, accelerometers, data acquisition units in the nature of electronic data recorders and software to detect, record, evaluate and provide warning of industrial seismic activity. (1) Custom design of geophysical instrumentation, namely, geophones, accelerometers, acquisition units in the nature of electronic data recorders, and software to monitor industrial seismic activity; collection and recording of passive seismic data for the petroleum, mining and geotechnical industries using sensors; geophysical analysis and interpretation of passive seismic data for the petroleum, mining and geotechnical industries using computers; monitoring seismicity associated with reservoir processes during hydraulic fracturing, enhanced oil recovery, underground gas storage, waste injection, underground and open-pit mining and geotechnical applications; geophysical research and consulting services.

75.

ESG SUPERCABLE

      
Numéro d'application 175649200
Statut Enregistrée
Date de dépôt 2015-11-25
Date d'enregistrement 2017-06-08
Propriétaire Engineering Seismology Group Canada Inc. (Canada)
Classes de Nice  ?
  • 07 - Machines et machines-outils
  • 09 - Appareils et instruments scientifiques et électriques

Produits et services

(1) Retrievable borehole sensor deployment system comprising geophysical sensor pods, cabling, clamping and magnet device, power supply, data acquisition unit, computer and software for the purpose of monitoring seismic activity associated with reservoir processes during hydraulic fracturing, enhanced oil recovery, underground gas storage and waste injection.

76.

Protective circuit

      
Numéro d'application 13813377
Numéro de brevet 09397492
Statut Délivré - en vigueur
Date de dépôt 2011-08-01
Date de la première publication 2015-11-05
Date d'octroi 2016-07-19
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s) Voelger, Reinhard

Abrégé

A circuit for protecting an electronic functional unit connected to a data line against positive and negative overvoltages includes an analog switch arranged in the data line before the electronic functional unit and a voltage monitor, which is configured to control the analog switch, wherein the voltage monitor is configured to close the analog switch when no overvoltage occurs and to open the analog switch when an overvoltage occurs. The circuit also functions in an energy-saving mode and/or when no supply voltage is applied. The low resistance and bidirectionality of the data line are maintained.

Classes IPC  ?

  • H02H 3/22 - Circuits de protection de sécurité pour déconnexion automatique due directement à un changement indésirable des conditions électriques normales de travail avec ou sans reconnexion sensibles à un excès de tension de courte durée, p.ex. foudre
  • H02H 3/20 - Circuits de protection de sécurité pour déconnexion automatique due directement à un changement indésirable des conditions électriques normales de travail avec ou sans reconnexion sensibles à un excès de tension
  • H02H 9/04 - Circuits de protection de sécurité pour limiter l'excès de courant ou de tension sans déconnexion sensibles à un excès de tension
  • H02H 9/00 - Circuits de protection de sécurité pour limiter l'excès de courant ou de tension sans déconnexion

77.

HIGH-THROUGHPUT FLUID SAMPLE CHARACTERIZATION

      
Numéro d'application GB2015051167
Numéro de publication 2015/162411
Statut Délivré - en vigueur
Date de dépôt 2015-04-17
Date de publication 2015-10-29
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Vaisman, Alon
  • Mccaffrey, John
  • Bennet, Peter
  • Patil, Vishal

Abrégé

A particle characterization apparatus and corresponding method is disclosed. The apparatus comprises a sample cell (14). The sample cell includes: an input opening (26) for receiving a fluid that carries particles flowing along a flow axis, a central acquisition channel (32) hydraulically responsive to the input opening (26) for receiving a first subset of the fluid,a pair of lateral bypass channels (32, 34) hydraulically responsive to the input opening (26) and disposed on either side of the central acquisition channel (32) for receiving second and third subsets of the fluid,a window (36) in the central acquisition channel (32) for illuminating the first subset of the fluid in the central acquisition channel (32),an illumination source (18) positioned to illuminate the fluid in the central acquisition channel (32) through the window (36), and a detector (20) positioned to receive light from the fluid in the central acquisition channel (32) after it has interacted with the fluid.

Classes IPC  ?

  • G01N 15/14 - Recherche par des moyens électro-optiques
  • G01N 15/08 - Recherche de la perméabilité, du volume des pores ou de l'aire superficielle des matériaux poreux

78.

Attachment and alignment device for optical sources, detectors and analysers, and modular analysis system

      
Numéro d'application 14673941
Numéro de brevet 09766124
Statut Délivré - en vigueur
Date de dépôt 2015-03-31
Date de la première publication 2015-10-08
Date d'octroi 2017-09-19
Propriétaire Servomex Group Limited (Royaume‑Uni)
Inventeur(s)
  • Kasiutsich, Vasili
  • Lopez, Martin

Abrégé

A device is provided for combining two or more separate components of an optical analysis system, to use common entrance and exit apertures for optical measurements across a measurement space such as a stack, combustion chamber, duct or pipeline, in such way that the optical paths from the respective light sources to detectors are substantially the same, enabling multiple optical measurements over a single optical path or closely aligned optical paths with equivalent ambient conditions such as temperature and pressure distribution and background substance concentrations. The device and a set of interconnectable devices forming a modular system are useful, for example, in absorption spectroscopy, such as for measuring the amount fraction of the chemical constituents of a fluid in a measurement volume.

Classes IPC  ?

  • G01J 3/02 - Spectrométrie; Spectrophotométrie; Monochromateurs; Mesure de la couleur - Parties constitutives
  • G02B 27/10 - Systèmes divisant ou combinant des faisceaux
  • G01N 21/29 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en utilisant la détection visuelle
  • G01N 21/39 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique en utilisant des lasers à longueur d'onde réglable
  • G01N 21/3504 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique en utilisant la lumière infrarouge pour l'analyse des gaz, p.ex. analyse de mélanges de gaz
  • G01J 3/42 - Spectrométrie d'absorption; Spectrométrie à double faisceau; Spectrométrie par scintillement; Spectrométrie par réflexion

79.

RAMAN SPECTROSCOPIC STRUCTURE INVESTIGATION OF PROTEINS DISPERSED IN A LIQUID PHASE

      
Numéro d'application GB2015050892
Numéro de publication 2015/145149
Statut Délivré - en vigueur
Date de dépôt 2015-03-25
Date de publication 2015-10-01
Propriétaire MALVERN INSTRUMENTS LTD. (Royaume‑Uni)
Inventeur(s) Lewis, E. Neil

Abrégé

A method of Raman spectroscopic structure investigation of a sample that includes a dispersed chemical species, in particular a protein, in a liquid phase and an apparatus for performing said method are described. The method comprises: providing the sample; providing marker particles in the sample; exciting the sample with a light source; receiving Raman-scattered light from the dispersed chemical species in the sample; detecting, from the received Raman-scattered light, Raman scattering from the dispersed chemical species in the sample; detecting movement of the marker particles in the sample; and extracting at least one characteristic of the dispersed chemical species in the sample from both the step of detecting Raman scattering and the step of detecting movement of the particles.

Classes IPC  ?

  • G01N 21/65 - Diffusion de Raman
  • G01N 11/00 - Recherche des propriétés d'écoulement des matériaux, p.ex. la viscosité, la plasticité; Analyse des matériaux en déterminant les propriétés d'écoulement

80.

Method and system for correcting incident light fluctuations in absorption spectroscopy

      
Numéro d'application 14662307
Numéro de brevet 09546902
Statut Délivré - en vigueur
Date de dépôt 2015-03-19
Date de la première publication 2015-09-24
Date d'octroi 2017-01-17
Propriétaire Servomex Group Limited (Royaume‑Uni)
Inventeur(s)
  • Kovacich, Richard P.
  • Alizadeh, Bahram
  • Gaskin, Ian C.
  • Hobby, James D.
  • Lopez, Martin

Abrégé

A method and system for correcting the effect of intensity fluctuations of the transmitted light in an absorption spectroscopy system used for the detection or measurement of chemical species in a medium, whereby one or more modulation bursts are imposed onto a light beam that passes through the medium. This burst signal may be obtained by modulating the bias current of a tunable diode laser, and the modulation burst signal may be optimally at the second harmonic of the modulation frequency of a wavelength modulated beam to allow usage of the same signal path processing used for the spectroscopic detection of the measurand for a second harmonic detection system. The burst signal can be controlled using a smooth window function to minimise the effects of non-linear perturbations that are inherent in tunable diode laser wavelength modulation spectroscopy systems, of optical interference fringes (etalons) and of the residual light absorption by background chemical species or the measurand at the wavelength coinciding with the modulation burst.

Classes IPC  ?

  • G01N 21/00 - Recherche ou analyse des matériaux par l'utilisation de moyens optiques, c. à d. en utilisant des ondes submillimétriques, de la lumière infrarouge, visible ou ultraviolette
  • G01J 3/02 - Spectrométrie; Spectrophotométrie; Monochromateurs; Mesure de la couleur - Parties constitutives
  • G01J 3/10 - Aménagements de sources lumineuses spécialement adaptées à la spectrométrie ou à la colorimétrie
  • G01J 3/433 - Spectrométrie par modulation; Spectrométrie par dérivation
  • G01N 21/39 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en recherchant l'effet relatif du matériau pour les longueurs d'ondes caractéristiques d'éléments ou de molécules spécifiques, p.ex. spectrométrie d'absorption atomique en utilisant des lasers à longueur d'onde réglable
  • G01N 21/27 - Couleur; Propriétés spectrales, c. à d. comparaison de l'effet du matériau sur la lumière pour plusieurs longueurs d'ondes ou plusieurs bandes de longueurs d'ondes différentes en utilisant la détection photo-électrique
  • G01J 3/42 - Spectrométrie d'absorption; Spectrométrie à double faisceau; Spectrométrie par scintillement; Spectrométrie par réflexion

81.

MONOLITHIC MINIATURE BROADBAND LIGHT SOURCE FOR MEASUREMENTS BY MEANS OF FBG STRAIN SENSORS

      
Numéro d'application DE2015000117
Numéro de publication 2015/135524
Statut Délivré - en vigueur
Date de dépôt 2015-03-13
Date de publication 2015-09-17
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Kat, Pieter, Lucas
  • Broeke, Ronald, Gijsbertus
  • Docter, Vincent, Johannes
  • Maul, Jochen
  • Haase, Karl-Heinz
  • Günther, Bernd

Abrégé

The invention relates to a semiconductor-based monolithic miniature broadband light source having improved light output for measurement by means of FBG strain sensors, wherein an InGaAsP semiconductor (1) is embedded between a p-lnP semiconductor (2) and an n-lnP semiconductor (3), wherein the InGaAsP semiconductor (1) has a length (L), and the p-lnP semiconductor (2) and the n-lnP semiconductor (3) are provided with metal contacts disposed in pairs. A first pair of contacts (4a, 4b) extends over at least 60% of the length (L) of the p-lnP semiconductor (2) and of the n-lnP semiconductor (3), and the first pair of contacts (4a, 4b) and the second pair of contacts (5a, 5b) are separated from one another galvanically by a gap (6) and the two contact surfaces of the second pair of contacts (5a, 5b) are connected to one another galvanically by an electrical conductor (7).

Classes IPC  ?

  • H01L 33/00 - DISPOSITIFS À SEMI-CONDUCTEURS NON COUVERTS PAR LA CLASSE - Détails
  • H01L 33/30 - Matériaux de la région électroluminescente contenant uniquement des éléments du groupe III et du groupe V de la classification périodique
  • H01L 33/38 - DISPOSITIFS À SEMI-CONDUCTEURS NON COUVERTS PAR LA CLASSE - Détails caractérisés par les électrodes ayant une forme particulière

82.

MINIATURE BROADBAND LIGHT SOURCE FOR TAKING MEASUREMENTS WITH FBG STRAIN SENSORS

      
Numéro d'application DE2015000118
Numéro de publication 2015/135525
Statut Délivré - en vigueur
Date de dépôt 2015-03-13
Date de publication 2015-09-17
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Kat, Pieter, Lucas
  • Broeke, Ronald, Gijsbertus
  • Docter, Vincent, Johannes
  • Maul, Jochen
  • Haase, Karl-Heinz
  • Günther, Bernd

Abrégé

The invention relates to a miniature light source which comprises the following components: a light-generating element (1) that has a first light-emitting surface (1a) and a second light-emitting surface (1b) lying parallel and opposite to the first, a reflector (2) that has a light input surface (2a) and a light output surface (2b) lying opposite one another, a device (3) for measuring light intensity, and a casing, said light-generating element (1) being a broadband light source, the reflector (2) being coupled to the second light-emitting surface (1b) of the light-generating element (1) by means of its light input surface (2a) and having the properties of reflecting, in the direction of the first light-emitting surface (1a), 70% to 99% of the light emitted from the second light-emitting surface (1b) and of not reflecting 1% to 30% but instead allowing it to pass through as light with two subspectra (c1, c2), the device for measuring light intensity (3) being optically coupled to the light-emitting surface (2b) and therefore able to receive the light with the two subspectra (c1, c2), and the casing being provided with an opening for the purpose of coupling an optical fibre (5).

Classes IPC  ?

83.

HETEROGENEOUS FLUID SAMPLE CHARACTERIZATION

      
Numéro d'application GB2015050496
Numéro de publication 2015/124942
Statut Délivré - en vigueur
Date de dépôt 2015-02-20
Date de publication 2015-08-27
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Lewis, E. Neil
  • Mccaffrey, John
  • Patil, Vishal
  • Haber, Ken

Abrégé

The invention relates to methods and apparatus for detecting properties of heterogeneous samples, including detecting properties of particles or fluid droplets in industrial processes. Embodiments disclosed include a particle characterization method, comprising: providing a fluid containing suspended particles; causing at least a first subset of the suspended particles to flow past a first two-dimensional array detector (24); illuminating the first subset of suspended particles as they flow past the first two-dimensional array detector (24) in the fluid; acquiring a plurality of images of the first subset of particles as they flow past the first two-dimensional array detector (24) in the fluid; and automatically counting the particles in the images.

Classes IPC  ?

  • G01N 15/14 - Recherche par des moyens électro-optiques
  • G01N 15/10 - Recherche de particules individuelles

84.

ROTATIONAL RHEOMETRY

      
Numéro d'application GB2014050413
Numéro de publication 2015/121601
Statut Délivré - en vigueur
Date de dépôt 2014-02-12
Date de publication 2015-08-20
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s) Scullion, Richard Paul

Abrégé

The invention relates to methods and apparatus for measurement of viscosity of liquids using a rotational rheometer. Embodiments disclosed include a method of measuring viscosity of a liquid sample using a rotational rheometer ( 100) comprising first and second parts (101,102) having opposing respective first and second measurement surfaces (103, 104), a motor (105) connected to the second part (102) for rotating the second part ( 102) relative to the first part (101) and a rotational position sensor (106) for measurement of rotation of the second part (102) relative to the first part (101), the method comprising the sequential steps of: disposing the liquid sample (107) between the first and second measurement surfaces (103,104); applying a driving signal corresponding to a requested torque to the motor (105) to rotate the second part (102) relative to the first part (101) in a first direction; recording rotation of the second part (102) with the rotational position sensor ( 106) and a derived measure of torque while the second part (102) rotates in the first direction; reversing the driving signal to rotate the second part (102) relative to the first part (101) in a second opposing direction; recording rotation of the second part (102) with the rotational position sensor (106) and a derived measure of torque while the second part (102) rotates in the second direction; and calculating a measure of viscosity of the liquid sample (107) using a combination of the rotational position over time and the derived measure of torque in the first and second directions.

Classes IPC  ?

  • G01N 11/14 - Recherche des propriétés d'écoulement des matériaux, p.ex. la viscosité, la plasticité; Analyse des matériaux en déterminant les propriétés d'écoulement en déplaçant un corps à l'intérieur du matériau en utilisant des corps en rotation, p.ex. moulinet
  • G01N 11/16 - Recherche des propriétés d'écoulement des matériaux, p.ex. la viscosité, la plasticité; Analyse des matériaux en déterminant les propriétés d'écoulement en déplaçant un corps à l'intérieur du matériau en mesurant l'effet d'amortissement sur un corps oscillant

85.

SPECTRIS

      
Numéro d'application 014362305
Statut Enregistrée
Date de dépôt 2015-07-15
Date d'enregistrement 2017-12-17
Propriétaire Spectris Plc. (Royaume‑Uni)
Classes de Nice  ?
  • 09 - Appareils et instruments scientifiques et électriques
  • 35 - Publicité; Affaires commerciales
  • 42 - Services scientifiques, technologiques et industriels, recherche et conception

Produits et services

Electrical appliances, apparatus, sensors, instruments and programmes and parts thereof and fittings therefor including micro-electronic components for said appliances, apparatus and instruments; all for use in measuring, regulating, weighing, control, monitoring and signalling technology; software; measuring, detecting and monitoring instruments, indicators and controllers; laboratory instruments [other than for medical use]; data collection apparatus; monitoring, weighing, test and measurement software; gas analysers; scanners and decoders; testing and quality control devices; process controlling software; process control apparatus; process control instruments; material testing instruments and machines; material testing apparatus; rheometers; viscometers; imaging apparatus; particle detectors; particle detecting apparatus; particle classifying apparatus; spectrometers; spectrometry apparatus; X-ray apparatus for industrial purposes; X-ray analysers [other than for medical use]; apparatus and installations for the production of X-rays, not for medical purposes; spectroscopes; X-ray spectroscopy apparatus [other than for medical use]; X-ray tubes not for medical purposes; vibration detectors; vibration sensors; instruments for measuring vibration; vibration exciters; transducers; transducer apparatus; testing apparatus for electronic equipment; portable test apparatus; load cells; gauges; strain gauges; X-ray gauges; ultrasonic thickness gauges; ultrasonic sensors; ultrasonic measuring apparatus; signal conditioners; amplifiers; weight measuring instruments; weighing apparatus and instruments; electronic weighing scales; calibration devices; graduation checkers [calibration checkers]; seismic detectors; safety monitoring apparatus [electric]; transmitters; telecommunication transmitters, apparatus and equipment; telecommunication networks; real-time data processing apparatus; lasers; laser measuring systems; lasers for industrial use; apparatus for analysing gases; gas analysers; bar code scanners; bar code readers; bar code decoders; thermocouples; temperature measuring instruments; temperature controllers; instruments for temperature control; temperature controlling apparatus; resistance temperature detectors; thermistors; humidity measuring apparatus; humidity meters; humidity sensors; infrared detectors; infrared detection apparatus; infrared thermometers; infrared scanners; infrared sensors; electric control devices for heating management; pressure sensors; instruments for measuring pressure; torque measuring apparatus; flow measuring apparatus; level measuring instruments and apparatus; water quality measuring instruments and apparatus; data loggers and recorders; USB [universal serial bus] operating software; programmable logic controllers; man-machine interfaces; motion and motor controls; sensor switches; data switches; switches, electric; switching apparatus (Electric -); panel meters; digital panel meters; computer software relating to the aforesaid; downloadable publications relating to the aforesaid; parts and fittings for all the aforesaid; none of the foregoing for use in collecting, analysing or managing client/customer records or for use in relation to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events. Business consultancy; market analysis; business data analysis; business strategy advice and consultancy; collection of data; data processing; data processing services; computerised data processing; data management services; head office services; office functions services; business office services; company office secretarial services; office administration services [for others]; office management services [for others]; none of the foregoing services relating to the collection, analysis or management of client customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events. Scientific, technical and industrial research; industrial and technological engineering analysis; engineering services; engineering services for the analysis of structures; testing, authentication and quality control; quality testing; quality control; quality control testing; certification [quality control]; quality control services; quality audits; quality assurance consultancy; providing quality assurance services; assessing chemical information in relation to risks; monitoring services; services for monitoring industrial processes; monitoring of contaminated land; sampling for contamination; design of computer software; quality control services; analysis of materials; materials testing and analysing; chemical analysis; chemical analysis services; blasting vibration measurement; blasting vibration analysis; testing of apparatus; testing of computing equipment; calibration services; measurement services; laboratory testing services; technical testing services; recordal of seismic data; monitoring the quality control of seismic procedures; geo-seismic survey services; creation, maintenance, adaptation and repair of software; rental and installation of software; engineering consultancy; engineering consultancy relating to manufacture; technological services relating to manufacture; development of computer software application solutions; development of software solutions for internet users; gas analysing services; engineering project management services; environmental consultancy services; compilation of environmental information; environmental testing of vibration; environmental testing of noise pollution; consultancy, information and advice related to the aforesaid; none of the foregoing services relating to the collection, analysis or management of client customer records or relating to reservation, booking, sales, notification or promotional services for entertainment, educational, sporting or cultural events.

86.

IMPROVEMENTS IN OR RELATING TO CALIBRATION OF INSTRUMENTS

      
Numéro d'application GB2014053314
Numéro de publication 2015/075424
Statut Délivré - en vigueur
Date de dépôt 2014-11-07
Date de publication 2015-05-28
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Hole, John Patrick
  • Smith, Jonathan Benjamin Kendall
  • Wilson, Ian John
  • Malloy, Andrew Paul

Abrégé

Disclosed is a method of calibrating apparatus for optically characterising samples of particles of small size comprising the steps of: (a)introducing into the apparatus a sample of a calibration population of particles which is (i) substantially monodisperse and (ii) homogeneous and (iii) has a known concentration of particles in terms of number per unit volume; (b)analysing the sample, under appropriate conditions to determine, for a particular combination of apparatus conditions or settings, the number of particles detected and the average brightness of individually detected and measured particles; (c)adjusting the apparatus to a new particular combination of apparatus conditions or settings and analysing the same sample, or another sample of the same calibration population as in step (a), and repeating the analysis of step (b) to determine the number of particles detected and the average brightness of detected particles under the new combination of apparatus conditions or settings; (d)optionally repeating step (c) at one or more further new particular combinations of apparatus conditions or settings; and (e)deriving from the analyses a calibration plot or look-up table of brightness of particle against number of particles detected, which is used to calibrate the apparatus against subsequent analysis of populations of particles of unknown concentration, to determine an estimate of the concentration thereof.

Classes IPC  ?

  • G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules
  • G01N 15/06 - Recherche de la concentration des suspensions de particules

87.

Dual-mode characterization of particulates

      
Numéro d'application 14239039
Numéro de brevet 09816922
Statut Délivré - en vigueur
Date de dépôt 2012-08-17
Date de la première publication 2015-05-28
Date d'octroi 2017-11-14
Propriétaire Malvern Instruments Limited (Royaume‑Uni)
Inventeur(s) Lewis, E. Neil

Abrégé

The invention relates to methods and apparatus for detecting properties of suspended particles. Embodiments disclosed include an optical instrument (200) for detecting properties of a sample, comprising: a sample cell (103) for holding a sample of a particulate dispersion; a coherent light source (101) configured to illuminate the sample in the sample cell (103); a light intensity detector (104, 106) positioned to receive and measure an intensity of light from the coherent light source (101) elastically scattered by the sample in the sample cell (103); and a spectral light detector (212) positioned and configured to receive and measure a range of wavelengths of light from the coherent radiation source (101) inelastically scattered by the sample in the sample cell (103).

Classes IPC  ?

  • G01N 21/00 - Recherche ou analyse des matériaux par l'utilisation de moyens optiques, c. à d. en utilisant des ondes submillimétriques, de la lumière infrarouge, visible ou ultraviolette
  • G01N 21/51 - Dispersion, c. à d. réflexion diffuse dans un corps ou dans un fluide à l'intérieur d'un récipient, p.ex. dans une ampoule
  • G01J 3/44 - Spectrométrie Raman; Spectrométrie par diffusion
  • G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules
  • G01N 21/65 - Diffusion de Raman
  • G01N 15/14 - Recherche par des moyens électro-optiques
  • G01N 21/80 - Indication de la valeur du pH
  • G01N 21/47 - Dispersion, c. à d. réflexion diffuse

88.

Apparatus and method for measuring particle size distribution by light scattering

      
Numéro d'application 14345073
Numéro de brevet 09869625
Statut Délivré - en vigueur
Date de dépôt 2012-09-11
Date de la première publication 2015-05-21
Date d'octroi 2018-01-16
Propriétaire Malvern Instruments Limited (Royaume‑Uni)
Inventeur(s)
  • Spriggs, David Michael
  • Stephenson, Duncan

Abrégé

Apparatus (100) for measuring particle size distribution by light scattering comprises a blue LED (102) and a 633 nm helium neon laser (104). Light output from the LED and laser is separately passed or reflected by a dichroic element (116) onto a common path through a sample cell (122) containing a sample, the particle size distribution of which is to be measured. Light scattered from the sample cell is detected by one or more detectors (112B-H). Light transmitted by the sample cell is detected by detectors 112A, 112J. Output signals from one or more of the detectors are passed to a computation unit (114) which calculates particle size distribution. A small percentage of light from the blue LED is reflected by the dichroic element to a detector (110). Similarly, a small percentage of light from the laser is passed by the dichroic element to the detector. Output signals from the detector are fed back to control units (106, 108) to stabilize the output power of the LED and laser.

Classes IPC  ?

  • G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules
  • G01N 21/47 - Dispersion, c. à d. réflexion diffuse
  • G01N 21/49 - Dispersion, c. à d. réflexion diffuse dans un corps ou dans un fluide

89.

IMPROVEMENTS RELATING TO PARTICLE CHARACTERISATION

      
Numéro d'application GB2014053272
Numéro de publication 2015/067930
Statut Délivré - en vigueur
Date de dépôt 2014-11-04
Date de publication 2015-05-14
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s) Spriggs, David

Abrégé

A particle characterisation apparatus is disclosed comprising: a light source; a sample cell; a collecting lens and a detector. The light source is operable to illuminate a sample comprising dispersed particles within the sample cell with a light beam along a light beam axis. The light beam axis passes through a first wall of the sample cell, through the sample, and through a second wall of the sample cell, so as to produce scattered light by interactions with the sample. The detector is configured to detect light scattered from the sample. The second wall of the sample cell comprises a lens with a convex external surface through which the light beam axis passes. The collecting lens is arranged to collect and focus scattered light leaving the sample cell onto the detector,and comprises an aspheric surface.

Classes IPC  ?

  • G01N 15/02 - Recherche de la dimension ou de la distribution des dimensions des particules
  • G02B 3/00 - Lentilles simples ou composées
  • G01N 21/49 - Dispersion, c. à d. réflexion diffuse dans un corps ou dans un fluide
  • G01N 15/14 - Recherche par des moyens électro-optiques

90.

DEVICE FOR MONITORING WEAR ON CONTACT LINES

      
Numéro d'application DE2014000571
Numéro de publication 2015/067235
Statut Délivré - en vigueur
Date de dépôt 2014-11-07
Date de publication 2015-05-14
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s) Viel, Wolfgang

Abrégé

The invention relates to a device for measuring force and for monitoring wear on contact lines (3) by means of a force-measuring system, which device has the following features: two contact strips (1a, 1b), which, in the operating state, are oriented at a right angle to a contact line (3) to be monitored, and two connecting bars (2a, 2b), which, in the operating state, are oriented parallel to the contact line (3) to be monitored, wherein a rod-shaped force sensor (4a - 4d) is fastened to each end segment of the two connecting bars (2a, 2b) and each of said rod-shaped force sensors (4a - 4d) extends in an axial direction of the respective connecting bar (2a, 2b).

Classes IPC  ?

  • B60L 5/20 - Collecteurs de courant pour lignes d'alimentation en énergie sur les véhicules propulsés électriquement utilisant des collecteurs en forme d'arc en contact avec le câble du trolley - Détails du contact de l'arc
  • G01L 1/00 - Mesure des forces ou des contraintes, en général
  • B60L 5/22 - Organes de support pour l'arc de contact

91.

MEASURING AMPLIFIER WITH BACKGROUND ADJUSTMENT AND METHOD THEREFOR

      
Numéro d'application DE2014000463
Numéro de publication 2015/032382
Statut Délivré - en vigueur
Date de dépôt 2014-09-05
Date de publication 2015-03-12
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Schäck, Marco M.
  • Kitzing, Herbert

Abrégé

The invention concerns a measuring amplifier (103) with background calibration and adjustment, as well as a method for performing background calibration and adjustment for a measuring amplifier of this type. The measuring amplifier amplifies, digitizes and processes at least one measurement signal (111) from at least one sensing element (102) by means of at least one amplifier arrangement (108) which can temporarily be replaced with an additional amplifier arrangement (107), enabling its continuous calibration and, if necessary, adjustment. In the case of calibration, both a zero error and an amplification error of the amplifier arrangement are reliably determined. In addition, the amplifier arrangement is calibrated directly, not indirectly, thus achieving a high level of accuracy without interrupting measuring. Furthermore, only one additional amplifier arrangement is generally required, even for a measuring amplifier having a plurality of channels.

Classes IPC  ?

92.

FORCE TRANSDUCER CONSTRUCTION

      
Numéro d'application DE2013000465
Numéro de publication 2015/021951
Statut Délivré - en vigueur
Date de dépôt 2013-08-15
Date de publication 2015-02-19
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Schuster, Hans
  • Jauch, Christian

Abrégé

The invention relates to a force transducer construction having the follow features: - a first deformation element (1), on which a force (F) to be measured acts, wherein on or in the deformation element (1), at locations having a narrowed cross-section (1a), sensors (3a, 3b) for measuring the material elongation at said locations are arranged, - a second deformation element (6), on which sensors (3c, 3d) for measuring the material elongation are provided, and - a guide (7a, 7b), which holds the first deformation element (1) substantially in the functional position thereof in the event of a fracture at the location having a narrowed cross-section (1a) and guides the first deformation element against the second deformation element (6) in the event of further application of force.

Classes IPC  ?

  • G01L 1/26 - Mesures auxiliaires prises, ou dispositifs utilisés en liaison avec le mesurage des forces, p.ex. pour empêcher l'influence des composantes transversales de la force, pour empêcher la surcharge
  • G01L 1/22 - Mesure des forces ou des contraintes, en général en faisant usage des cellules électrocinétiques, c. à d. des cellules contenant un liquide, dans lesquelles un potentiel électrique est produit ou modifié par l'application d'une contrainte en utilisant des jauges de contrainte à résistance
  • G01G 3/14 - Appareils de pesée caractérisés par l'utilisation d'organes déformables par élasticité, p.ex. balances à ressort dans lesquels l'élément de pesée est constitué par un corps solide soumis à une pression ou une traction pendant la pesée utilisant la mesure des variations de la résistance électrique

93.

ROD-SHAPED FORCE TRANSDUCER WITH SIMPLIFIED ADJUSTMENT

      
Numéro d'application DE2014000390
Numéro de publication 2015/010683
Statut Délivré - en vigueur
Date de dépôt 2014-07-28
Date de publication 2015-01-29
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Jäger, Andreas
  • Will, Heinz-Ronald
  • Schlachter, Werner

Abrégé

The present invention relates to a force transducer (101) for measuring compressive and/or tensile forces, said force transducer having a rod-shaped deformation body (102) which has at least a front face (103), a rear face, a left-side face (105), a right-side face (106), an upper end face (107) and a lower end face (108) and at least four strain gauges (117, 118, 119) which are provided on the deformation body (102) and are configured to measure the longitudinal extension and the transverse extension of the deformation body (102). On the front face (103) is provided a front elongate recess (109) in the region of a point of intersection (S) between a central longitudinal axis (L) and a central transverse axis (Q1) of the deformation body (102). Opposite the front elongate recess (109) is provided, on the rear side, a rear elongate recess. On the left-side face (105) are provided at least a left-side upper indentation (112) above the central transverse axis (Q1) and a left-side lower indentation (113) below the central transverse axis (Q1). Opposite each of these indentations on the left-side face are provided, on the right-side face (106), at least a right-side upper indentation (114) and a right-side lower indentation (115). An angle (a) between the central transverse axis (Q1) and the shortest connecting line (V) between the front elongate recess (109) and the left-side upper indentation (112) is not smaller than 17° and not larger than 29°.

Classes IPC  ?

  • G01L 1/22 - Mesure des forces ou des contraintes, en général en faisant usage des cellules électrocinétiques, c. à d. des cellules contenant un liquide, dans lesquelles un potentiel électrique est produit ou modifié par l'application d'une contrainte en utilisant des jauges de contrainte à résistance
  • G01G 3/14 - Appareils de pesée caractérisés par l'utilisation d'organes déformables par élasticité, p.ex. balances à ressort dans lesquels l'élément de pesée est constitué par un corps solide soumis à une pression ou une traction pendant la pesée utilisant la mesure des variations de la résistance électrique

94.

ROD-SHAPED FORCE TRANSDUCER WITH IMPROVED DEFORMATION BEHAVIOR

      
Numéro d'application DE2014000391
Numéro de publication 2015/010684
Statut Délivré - en vigueur
Date de dépôt 2014-07-28
Date de publication 2015-01-29
Propriétaire HOTTINGER BALDWIN MESSTECHNIK GMBH (Allemagne)
Inventeur(s)
  • Jäger, Andreas
  • Will, Heinz-Ronald
  • Schlachter, Werner

Abrégé

The present invention relates to a force transducer for measuring compressive and/or tensile forces, said force transducer having a rod-shaped deformation body which has at least a front face (103), a rear face (104), a left-side face (105), a right-side face (106), an upper end face and a lower end face and at least four strain gauges (117, 121) which are provided on the deformation body and are configured to measure the longitudinal extension and the transverse extension of the deformation body. On the front face (103) is provided a front elongate recess (109) in the region of a point of intersection (S) between a central longitudinal axis and a central transverse axis (Q1) of the deformation body. Opposite the front elongate recess (109) is provided, on the rear side, a rear elongate recess (110). On the left-side face (105) are provided at least a left-side upper indentation above the central transverse axis (Q1) and a left-side lower indentation below the central transverse axis (Q1). Opposite each of these indentations on the left-side face are provided, on the right-side face (106), at least a right-side upper indentation and a right-side lower indentation. A ratio of a surface area of a material cross-section in a central plane extending orthogonally to the central longitudinal axis and comprising the central transverse axis (Q1) to a sum of a surface area of a first sub-region of the material cross-section and a surface area of a second sub-region of the material cross-section is not less than 1.56 and not more than 2.15.

Classes IPC  ?

  • G01L 1/22 - Mesure des forces ou des contraintes, en général en faisant usage des cellules électrocinétiques, c. à d. des cellules contenant un liquide, dans lesquelles un potentiel électrique est produit ou modifié par l'application d'une contrainte en utilisant des jauges de contrainte à résistance
  • G01G 3/14 - Appareils de pesée caractérisés par l'utilisation d'organes déformables par élasticité, p.ex. balances à ressort dans lesquels l'élément de pesée est constitué par un corps solide soumis à une pression ou une traction pendant la pesée utilisant la mesure des variations de la résistance électrique

95.

DETECTOR-ARRAY-BASED SAMPLE CHARACTERIZATION

      
Numéro d'application IB2014062017
Numéro de publication 2014/195917
Statut Délivré - en vigueur
Date de dépôt 2014-06-06
Date de publication 2014-12-11
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s) Lewis, E. Neil

Abrégé

An optical sample characterization method is disclosed comprising: holding a sample in a sample container ( 12; 32; 52; 1 52; 162) proximate at least one two-dimensional detector array assembly ( 14; 34; 44; 54; 144; 164), wherein the sample container has a first end and a second end; setting up a gradient between the first end of the sample container and the second end of the sample container; illuminating the sample between the first end of the sample container and the second end of the sample container; and detecting light received from the illuminated sample from the first end of the sample container to the second end of the sample container by the two-dimensional array assembly ( 14; 34; 44; 54; 144; 1 64).

Classes IPC  ?

  • G01N 21/41 - Réfringence; Propriétés liées à la phase, p.ex. longueur du chemin optique

96.

PREPARATION OF SAMPLE-PELLETS BY PRESSING

      
Numéro d'application EP2014056867
Numéro de publication 2014/162002
Statut Délivré - en vigueur
Date de dépôt 2014-04-04
Date de publication 2014-10-09
Propriétaire PANALYTICAL B.V. (Pays‑Bas)
Inventeur(s)
  • Campbell, Ian
  • Gardolinski, Jose Eduardo Ferreira Da Costa

Abrégé

A sample may be prepared for measurement by pressing, for example for XRF. In some cases, the sample may include a component that may mobilise on pressing. Such samples may be prepared by adding a binder to the sample. The binder includes an additive for binding the component that may mobilise and may include an additional component or components such as wax. The binder may be activated carbon, graphite or a mixture. The sample may be mixed using a mill, for example, and pressed into a pellet. Measurements may then be made on the pressed sample.

Classes IPC  ?

  • G01N 23/207 - Diffractométrie, p.ex. en utilisant une sonde en position centrale et un ou plusieurs détecteurs déplaçables en positions circonférentielles
  • G01N 23/22 - Recherche ou analyse des matériaux par l'utilisation de rayonnement [ondes ou particules], p.ex. rayons X ou neutrons, non couvertes par les groupes , ou en mesurant l'émission secondaire de matériaux
  • G01N 23/223 - Recherche ou analyse des matériaux par l'utilisation de rayonnement [ondes ou particules], p.ex. rayons X ou neutrons, non couvertes par les groupes , ou en mesurant l'émission secondaire de matériaux en irradiant l'échantillon avec des rayons X ou des rayons gamma et en mesurant la fluorescence X

97.

ELUATE ANALYSIS AND COLLECTION

      
Numéro d'application GB2014050736
Numéro de publication 2014/140570
Statut Délivré - en vigueur
Date de dépôt 2014-03-12
Date de publication 2014-09-18
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Leszczyszyn, Oksana, Iryna
  • Clarke, Paul, G.
  • Nicholls, Mark
  • Lewis, E, Neil

Abrégé

The invention relates to analysing and controlling collection of liquid eluate output from a separation process, in particular by use of a measure of suspended material in the eluate based on a light scattering detection method. Exemplary embodiments include a method (300) of controlling collection of a sample of a liquid eluate output from a separation process, the method comprising: exposing (306) the liquid eluate to light from a light source; detecting (307) light from the light source scattered by suspended material in the eluate at a detector; and beginning and ending collection (310) of the sample when a measure of the suspended material derived from the detected scattered light enters and leaves a predetermined range.

Classes IPC  ?

98.

PLATINUM

      
Numéro d'application 169199600
Statut Enregistrée
Date de dépôt 2014-09-02
Date d'enregistrement 2017-08-28
Propriétaire OMEGA ENGINEERING, INC., a Delaware corporation (USA)
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

(1) Web communications server and an Ethernet-serial bridge; meters and controllers sold as stand-alone devices or connected directly to an Ethernet network or to a global computer network for use in measuring, controlling, and regulating temperature, humidity, pressure, strain, flow, force, level, PH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, conductivity and data acquisition, display, and retrieval of electrical signals from sensors, switches, and transducers.

99.

PLATINUM

      
Numéro de série 86379642
Statut Enregistrée
Date de dépôt 2014-08-28
Date d'enregistrement 2020-11-10
Propriétaire Omega Engineering, Inc. ()
Classes de Nice  ? 09 - Appareils et instruments scientifiques et électriques

Produits et services

Web communications server; meters and controllers for meters for use in measuring, controlling, and/or regulating temperature not for medical use, humidity, pressure not for medical use, strain, fluid flow, force, fluid level, PH, load, vibration, electrical resistance, air velocity, amperage, frequency, voltage, ion concentration, electrical conductivity and data acquisition of the foregoing conditions, and controllers for meters for use in the display and retrieval of electrical signals from sensors, switches, and transducers that are sold as stand-alone use devices or for connection directly to an Ethernet network or connection to a global computer network

100.

IMAGING MICROVISCOMETER

      
Numéro d'application GB2014050505
Numéro de publication 2014/128478
Statut Délivré - en vigueur
Date de dépôt 2014-02-20
Date de publication 2014-08-28
Propriétaire MALVERN INSTRUMENTS LIMITED (Royaume‑Uni)
Inventeur(s)
  • Lewis, E. Neil
  • Haber, Kenneth, S.
  • Mccaffrey, John
  • Patil, Vishal
  • Amin, Samiul
  • Goswami, Rohit

Abrégé

A viscometer, comprising: a source of fluid pressure, a tube, an array of optical detectors, an acquisition driver circuit and viscosity computation logic. The tube has an inside volume that is hydraulically responsive to the source of fluid pressure. The array of optical detectors is positioned along a length of the first tube with a plurality of its detectors optically responsive to the inside volume of the first tube and including an image data output. The acquisition driver circuit is responsive to the image data output of the first array to acquire a series of successive images of the inside volume of the first tube. The viscosity computation logic is responsive to the acquisition driver circuit and operative to compute the viscosity of a fluid flowing along the first tube from the series of images of the inside volume of the first tube.

Classes IPC  ?

  • G01N 11/06 - Recherche des propriétés d'écoulement des matériaux, p.ex. la viscosité, la plasticité; Analyse des matériaux en déterminant les propriétés d'écoulement en mesurant l'écoulement du matériau à travers un passage étroit, p.ex. un tube, une ouverture en chronométrant l'écoulement d'une quantité connue vers l'extérieur
  • G01N 11/04 - Recherche des propriétés d'écoulement des matériaux, p.ex. la viscosité, la plasticité; Analyse des matériaux en déterminant les propriétés d'écoulement en mesurant l'écoulement du matériau à travers un passage étroit, p.ex. un tube, une ouverture
  1     2     3     4        Prochaine page