A traffic light assembly and method for controlling a set of heating elements for the traffic light assembly. A traffic signal with a lens and a visor, the visor having an inner surface and extending from the lens. A sensor mounted to the traffic signal and in direct communication with an environment surrounding the traffic light assembly. A control module located within the traffic signal, the control module comprising a controller for implementing a primary loop that continuously checks environmental conditions via the sensor to determine if a predetermined condition is met.
A traffic light assembly and method for controlling a set of heating elements for the traffic light assembly. A traffic signal with a lens and a visor, the visor having an inner surface and extending from the lens. A sensor mounted to the traffic signal and in direct communication with an environment surrounding the traffic light assembly. A control module located within the traffic signal, the control module comprising a controller for implementing a primary loop that continuously checks environmental conditions via the sensor to determine if a predetermined condition is met.
17 - Rubber and plastic; packing and insulating materials
Goods & Services
A durable, rapid cure, fiberglass reinforced polyester and plastic repair patch that can be drilled, tapped, sanded or painted and that bonds to hard surfaces for patching holes, cracks, gaps, and tears in trucks and trailers
4.
WEAR RESISTANT BORIDE FORMING FERROUR ALLOYS FOR POWDER BED FUSION ADDITIVE MANUFACTURING
The present application relates to ferrous (steel) alloy compositions that can be printed by powder bed fusion additive manufacturing. The combination of printability and properties is achieved by formulating chemistries specifically for the powder bed fusion process.
A 3D printed tool die and tool die kit for a machine is provided. The 3D printed die has a cold-working tool face and having a reduced height being less than a standard tool die. A die holder is configured to be positioned in a standard tool to hold the 3D printed die. A clamp engages and retains the 3D printed die in the die holder.
A security fastener assembly is provided with a cap having a decorative bearing surface and a lower retention portion. A fastener body has: a threaded portion or securing the fastener assembly to a corresponding threaded feature on a vehicle; a stem opposite the threaded portion for receiving the cap, the stem having a security protrusion defining a distal end, an undercut formed adjacent the stem for cooperating with the lower retention portion of the cap, where the lower retention portion of the cap is secured in the undercut to maintain the cap on the fastener body; a keyed security drive feature formed between the threaded portion the stem portion where the fastener body is removable with the keyed security feature. Engaging the decorative bearing surface of the cap and rotating does not rotate the threaded portion of the fastener body.
F16B 35/04 - Screw-bolts; Stay bolts; Screw-threaded studs; Screws; Set screws with specially-shaped head or shaft in order to fix the bolt on or in an object
F16B 39/24 - Locking of screws, bolts, or nuts in which the locking takes place during screwing down or tightening by means of washers, spring washers, or resilient plates that lock against the object
B60B 3/16 - Attaching disc body to hub by bolts or the like
Metallic alloys and methods for the preparation of free-standing metallic materials in a layerwise manner. The resulting layerwise construction provides a metallic skeleton of selected porosity which may be infiltrated with a second metal to provide a free-standing material that has a volume loss of less than or equal to 130 mm3 as measured according to ASTM G65-04(2010).
A tool die and additive manufacturing method of forming a cold-working tool die is provided. The cold-working tool surface may be a thread-rolling surface having a thread profile with a plurality of teeth spaced apart in the width direction and extending in the longitudinal direction, each of the teeth having a tooth height in a height direction and the surface has a tool feature having a complex shape. An iron-based alloy is supplied in particle form to form the tool die. The method includes depositing a plurality of layers of the alloy to form the die body with layer-by-layer construction to form a cold-working tool surface. Each layer is deposited in a plane transverse to the cold-working tool surface.
B22F 7/06 - Manufacture of composite layers, workpieces, or articles, comprising metallic powder, by sintering the powder, with or without compacting of composite workpieces or articles from parts, e.g. to form tipped tools
B22F 7/04 - Manufacture of composite layers, workpieces, or articles, comprising metallic powder, by sintering the powder, with or without compacting of composite layers with one or more layers not made from powder, e.g. made from solid metal
A security fastener assembly is provided with a cap having a decorative bearing surface and a lower retention portion. A fastener body has: a threaded portion or securing the fastener assembly to a corresponding threaded feature on a vehicle; a stem opposite the threaded portion for receiving the cap, the stem having a security protrusion defining a distal end, an undercut formed adjacent the stem for cooperating with the lower retention portion of the cap, where the lower retention portion of the cap is secured in the undercut to maintain the cap on the fastener body; a keyed security drive feature formed between the threaded portion the stem portion where the fastener body is removable with the keyed security feature. Engaging the decorative bearing surface of the cap and rotating does not rotate the threaded portion of the fastener body.
F16B 35/04 - Screw-bolts; Stay bolts; Screw-threaded studs; Screws; Set screws with specially-shaped head or shaft in order to fix the bolt on or in an object
10.
PRINTABLE HARD FERROUS METALLIC ALLOYS FOR ADDITIVE MANUFACTURING BY DIRECT ENERGY DEPOSITION PROCESSES
A printed metallic part is provided. The alloy has the composition of Fe at 69.2 wt. % to 89.1 wt. %; Cr at 7.25 wt. % to 16.0 wt. %; Nb at 0.01 wt. % to 10.0 wt. %; Mo at 0.5 wt. % to 4.0 wt. %. C at 0.03 wt. % to 0.4 wt. % and optionally one or more of Ni, Cu, Si, W, Mn, N and B. The printed metallic part has a tensile strength of at least 1300 MPa, a yield strength of at least 700 MPa, an elongation of at least 4.0%, and a hardness of at least 45 HRC.
An apparatus for a crank handle of a landing gear. The crank handle comprising an assembly with a rotating arm, a mounting end, a handle arm, and a handle grip. The handle grip mounted to the handle arm. The handle grip rotatable about the handle arm at a handle end of the crank handle assembly.
An apparatus for a crank handle of a landing gear. The crank handle comprising an assembly with a rotating arm, a mounting end, a handle arm, and a handle grip. The handle grip mounted to the handle arm. The handle grip rotatable about the handle arm at a handle end of the crank handle assembly.
B60S 9/04 - Ground-engaging vehicle fittings for supporting, lifting, or manoeuvring the vehicle, wholly or in part, e.g. built-in jacks for only lifting or supporting mechanically
B60S 9/08 - Ground-engaging vehicle fittings for supporting, lifting, or manoeuvring the vehicle, wholly or in part, e.g. built-in jacks for only lifting or supporting mechanically of screw-and-nut type the screw axis being substantially vertical
13.
3D PRINTABLE HARD FERROUS METALLIC ALLOYS FOR POWDER BED FUSION
Alloy compositions for 3D metal printing procedures which provide metallic parts with high hardness, tensile strengths, yield strengths, and elongation. The alloys include Fe, Cr and Mo and at least three or more elements selected from C, Ni, Cu, Nb, Si and N. As built parts indicate a tensile strength of at least 1000 MPa, yield strength of at least 640 MPa, elongation of at least 3.0% and hardness (HV) of at least 375.
B33Y 40/00 - Auxiliary operations or equipment, e.g. for material handling
C22C 38/02 - Ferrous alloys, e.g. steel alloys containing silicon
C22C 38/40 - Ferrous alloys, e.g. steel alloys containing chromium with nickel
C22C 38/04 - Ferrous alloys, e.g. steel alloys containing manganese
C22C 33/02 - Making ferrous alloys by powder metallurgy
B22F 1/05 - Metallic powder characterised by the size or surface area of the particles
B22F 3/24 - After-treatment of workpieces or articles
B22F 9/08 - Making metallic powder or suspensions thereof; Apparatus or devices specially adapted therefor using physical processes starting from liquid material by casting, e.g. through sieves or in water, by atomising or spraying
A security fastener assembly is provided with a cap having a standard tool bearing surface and an attachment portion formed opposite the tool bearing surface. A fastener body has a mating attachment portion formed at a first end along which the cap is secured and a keyed security feature formed adjacent the mating attachment portion. A second end of the fastener body has a threaded fastener portion for securing the fastener assembly to a vehicle. The threaded portion of the fastener body is installed with rotation in a first direction. Engaging the tool bearing surface of the cap and rotating in a second direction opposite the first direction does not rotate the threaded portion of the fastener body. The fastener body is removable with the keyed security feature.
A wheel fastener and method of forming a wheel fastener is provided. The wheel fastener has a fastener body with a threaded portion, a wrenching portion and a spherical load-bearing portion is configured to mate with a fastener seat on a wheel, where the spherical radius is in the range of 13.9 mm to 14.0 mm. The fastener also includes a multi-layer coating is applied to the fastener body, the multi-layer coating having a friction topcoat with a coefficient of friction in the range of 0.10 to 0.20. The fastener also includes a cap secured on the wrenching portion and defining a wrenching surface.
A wheel fastener alarm assembly is provided having a fastener body with a first portion defining a wrenching surface and a cavity, and a second portion with a threaded portion to attach and detach from a wheel of a vehicle. A sensor array is disposed in the cavity of fastener body to detect an attribute of the fastener body and generate an output signal based on the attribute of the fastener body. An antenna connected to the sensor array to transmit the signal to a remote location. A cap is secured to the first portion of the fastener body and covers the wrenching surface and the cavity opening to define a capped fastener body.
F16B 41/00 - Measures against loss of bolts, nuts, or pins; Measures against unauthorised operation of bolts, nuts, or pins
G07C 5/08 - Registering or indicating performance data other than driving, working, idle, or waiting time, with or without registering driving, working, idle, or waiting time
G08B 25/00 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems
G08B 25/10 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using wireless transmission systems
A wheel fastener and method of forming a wheel fastener is provided. The wheel fastener has a fastener body comprising a threaded portion and an upper portion opposite the threaded portion. A load-bearing surface of the fastener body is shaped to cooperate with a fastener seat. A cap is decoupled from the fastener body and has coating covering a cap base material to define a decorative appearance surface. The cap is crimped to the upper portion at a crimp area to retain the cap on the fastener body and define a wrenching surface. The cap does not cover the load bearing surface. The coating the cap comprises applying a nickel strike layer and a black chrome passivation layer to define a black appearance surface.
B60B 3/16 - Attaching disc body to hub by bolts or the like
C23C 28/00 - Coating for obtaining at least two superposed coatings either by methods not provided for in a single one of main groups , or by combinations of methods provided for in subclasses and
C23C 14/00 - Coating by vacuum evaporation, by sputtering or by ion implantation of the coating forming material
A clamp assembly is provided with a band having a length sized to wrap about a joint. A plurality of retainer segments is attached to the band to engage a peripheral flange of a pair of tube ends at the joint. A first threaded fastener is connected to the band at a first location. A second threaded fastener is sized to engage the band at a second location to extend to the first threaded fastener to fasten to the first threaded fastener upon rotation of the second threaded fastener to tighten the band and the plurality of retainer segments to clamp the joint.
F16L 23/04 - Flanged joints the flanges being connected by members tensioned in the radial plane
F16L 3/00 - Supports for pipes, cables or protective tubing, e.g. hangers, holders, clamps, cleats, clips, brackets
F16L 55/035 - Noise absorbers in the form of specially adapted hangers or supports
F16L 3/133 - Supports for pipes, cables or protective tubing, e.g. hangers, holders, clamps, cleats, clips, brackets substantially surrounding the pipe, cable or protective tubing comprising a member substantially surrounding the pipe, cable or protective tubing and hanging from a pendant
F16L 3/11 - Supports for pipes, cables or protective tubing, e.g. hangers, holders, clamps, cleats, clips, brackets substantially surrounding the pipe, cable or protective tubing divided, i.e. with two members engaging the pipe, cable or protective tubing and hanging from a pendant
The fastener assembly includes a fastener body having a threaded portion at a lower end, and a stem portion at an upper end. A cap has side walls defining a wrenching surface and a top surface connecting the top surface where the cap is secure to the stem portion on the upper end of the fastener body. The assembly also includes a decorative laser mark defined on the top surface of the cap.
A wheel fastener alarm assembly is provided having a fastener body with a first portion defining a wrenching surface and a cavity, and a second portion with a threaded portion to attach and detach from a wheel of a vehicle. A sensor array is disposed in the cavity of fastener body to detect an attribute of the fastener body and generate an output signal based on the attribute of the fastener body. An antenna connected to the sensor array to transmit the signal to a remote location. A cap is secured to the first portion of the fastener body and covers the wrenching surface and the cavity opening to define a capped fastener body.
B60R 25/10 - Fittings or systems for preventing or indicating unauthorised use or theft of vehicles actuating a signalling device
G08B 25/00 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems
G08B 25/10 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using wireless transmission systems
B60B 3/16 - Attaching disc body to hub by bolts or the like
B60Q 9/00 - Arrangement or adaptation of signal devices not provided for in one of main groups
F16B 41/00 - Measures against loss of bolts, nuts, or pins; Measures against unauthorised operation of bolts, nuts, or pins
G07C 5/08 - Registering or indicating performance data other than driving, working, idle, or waiting time, with or without registering driving, working, idle, or waiting time
A seat clamp is provided for securing a seat in a folded position and is adapted to be attached between a cargo hook in the vehicle and a seat. A clamp body is formed of plastic and has a first attachment feature along a first end, for securing the seat clamp to the cargo hook in the vehicle cargo area. A second attachment feature is formed at the second end of the clamp body for releasably securing the clamp body to a bracket on the seat with an interference fit.
A capped fastener is provided with two outer flanges and a groove therebetween. The cap is crimped around the first outer flange without covering the second outer flange. The end of the cap is crimped in a groove between the first and second outer flanges. A crimping tool and method of crimping are also provided for crimping the end of a cap into a groove between two outer flanges.
B21K 1/70 - Making machine elements nuts of special shape, e.g. self-locking nuts, wing nuts
B60B 3/16 - Attaching disc body to hub by bolts or the like
B21D 39/04 - Application of procedures in order to connect objects or parts, e.g. coating with sheet metal otherwise than by plating; Tube expanders of tubes with rods
24.
WEAR RESISTANT BORIDE FORMING FERROUR ALLOYS FOR POWDER BED FUSION ADDITIVE MANUFACTURING
The present application relates to ferrous (steel) alloy compositions that can be printed by powder bed fusion additive manufacturing. The combination of printability and properties is achieved by formulating chemistries specifically for the powder bed fusion process.
An isolation ground switch has a housing having a front housing portion and a back housing portion defining a housing cavity therebetween. A conductive switch plate is positioned in the housing cavity and rotatable between a closed position and an open position. A plurality of termination studs are mounted to the front housing portion, each termination stud having a conductive projection extending into the housing cavity. The conductive projection of each termination stud engages the switch plate when the switch plate rotates to the closed position, and when the switch plate rotates to the open position, the switch plate does not contact the termination studs and is conductively isolated
The present application relates to ferrous (steel) alloy compositions that can be printed by powder bed fusion additive manufacturing. The combination of printability and properties is achieved by formulating chemistries specifically for the powder bed fusion process.
A printed metallic part is provided. The alloy has the composition of Fe at 69.2 wt.% to 89.1 wt.%; Cr at 7.25 wt.% to 16.0 wt.%; Nb at 0.01 wt.% to 10.0 wt.%; Mo at 0.5 wt.% to 4.0 wt.%. C at 0.03 wt. % to 0.4 wt. % and optionally one or more of Ni, Cu, Si, W, Mn, N and B. The printed metallic part has a tensile strength of at least 1300 MPa, a yield strength of at least 700 MPa, an elongation of at least 4.0%, and a hardness of at least 45 HRC.
A printed metallic part is provided. The alloy has the composition of Fe at 69.2 wt.% to 89.1 wt.%; Cr at 7.25 wt.% to 16.0 wt.%; Nb at 0.01 wt.% to 10.0 wt.%; Mo at 0.5 wt.% to 4.0 wt.%. C at 0.03 wt. % to 0.4 wt. % and optionally one or more of Ni, Cu, Si, W, Mn, N and B. The printed metallic part has a tensile strength of at least 1300 MPa, a yield strength of at least 700 MPa, an elongation of at least 4.0%, and a hardness of at least 45 HRC.
Alloy compositions for 3D metal printing procedures which provide metallic parts with high hardness, tensile strengths, yield strengths, and elongation. The alloys include Fe, Cr and Mo and at least three or more elements selected from C, Ni, Cu, Nb, Si and N. As built parts indicate a tensile strength of at least 1000 MPa, yield strength of at least 640 MPa, elongation of at least 3.0% and hardness (HV) of at least 375.
A security fastener assembly is provided with a cap having a standard tool bearing surface and an attachment portion formed opposite the tool bearing surface. A fastener body has a mating attachment portion formed at a first end along which the cap is secured and a keyed security feature formed adjacent the mating attachment portion. A second end of the fastener body has a threaded fastener portion for securing the fastener assembly to a vehicle. The threaded portion of the fastener body is installed with rotation in a first direction. Engaging the tool bearing surface of the cap and rotating in a second direction opposite the first direction does not rotate the threaded portion of the fastener body. The fastener body is removable with the keyed security feature.
A wheel fastener alarm assembly is provided having a fastener body with a first portion defining a wrenching surface and a cavity, and a second portion with a threaded portion to attach and detach from a wheel of a vehicle. A sensor array is disposed in the cavity of fastener body to detect an attribute of the fastener body and generate an output signal based on the attribute of the fastener body. An antenna connected to the sensor array to transmit the signal to a remote location. A cap is secured to the first portion of the fastener body and covers the wrenching surface and the cavity opening to define a capped fastener body.
B60R 25/10 - Fittings or systems for preventing or indicating unauthorised use or theft of vehicles actuating a signalling device
G08B 25/00 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems
G08B 25/10 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using wireless transmission systems
B60B 3/16 - Attaching disc body to hub by bolts or the like
B60Q 9/00 - Arrangement or adaptation of signal devices not provided for in one of main groups
F16B 41/00 - Measures against loss of bolts, nuts, or pins; Measures against unauthorised operation of bolts, nuts, or pins
G07C 5/08 - Registering or indicating performance data other than driving, working, idle, or waiting time, with or without registering driving, working, idle, or waiting time
B60C 9/00 - Reinforcements or ply arrangement of pneumatic tyres
B60R 25/24 - Means to switch the anti-theft system on or off using electronic identifiers containing a code not memorised by the user
Fasteners are disclosed for reducing mass of the fastener, while being configured for use with standard torque delivery tools. The fasteners include non-torque bearing surfaces disposed between torque bearing surfaces.
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Land vehicle parts, namely, hinges for roll-up doors for
trucks and trailers; roll-up doors for trucks and trailers
and component parts therefor; mud flaps for trucks and
trailers; mud flap mounting brackets and mounting adapters
for use on trucks, trailers, buses and automobiles; vehicle
fender mounting brackets and mounting adapters; vehicle
fender mounting kits composed primarily of isolators,
mounting hardware and mounting brackets; motor vehicle
parts, namely, plastic fenders, mounting systems comprised
of molded teeth, gears and clamps and vibration isolators;
air brake line fitting repair kit for vehicle air brake
lines; compressed air components for transportation
vehicles, namely, gladhands and seals for gladhands.
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Land vehicle parts, namely, hinges for roll-up doors for trucks and trailers; roll-up doors for trucks and trailers and component parts therefor; mud flaps for trucks and trailers; mud flap mounting brackets and mounting adapters for use on trucks, trailers, buses and automobiles; vehicle fender mounting brackets and mounting adapters; vehicle fender mounting kits composed primarily of isolators, mounting hardware and mounting brackets; motor vehicle parts, namely, plastic fenders, mounting systems comprised of molded teeth, gears and clamps and vibration isolators; Air brake line fitting repair kit for vehicle air brake lines; compressed air components for transportation vehicles, namely, gladhands and seals for gladhands
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Land vehicle parts, namely, hinges for roll-up doors for trucks and trailers; roll-up doors for trucks and trailers and component parts therefor; mud flaps for trucks and trailers; mud flap mounting brackets and mounting adapters for use on trucks, trailers, buses and automobiles; vehicle fender mounting brackets and mounting adapters; vehicle fender mounting kits composed primarily of isolators, mounting hardware and mounting brackets; motor vehicle parts, namely, plastic fenders, mounting systems comprised of molded teeth, gears and clamps and vibration isolators; Air brake line fitting repair kit for vehicle air brake lines; compressed air components for transportation vehicles, namely, gladhands and seals for gladhands
A wheel fastener alarm is provided with a fastener body, a cap covering the fastener body, a sensor array disposed within the fastener body, and a cover disposed over an opening in the fastener body and a hole in the cap.
B60R 25/10 - Fittings or systems for preventing or indicating unauthorised use or theft of vehicles actuating a signalling device
G08B 25/00 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems
G08B 25/10 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using wireless transmission systems
B60B 3/16 - Attaching disc body to hub by bolts or the like
B60Q 9/00 - Arrangement or adaptation of signal devices not provided for in one of main groups
B60R 25/24 - Means to switch the anti-theft system on or off using electronic identifiers containing a code not memorised by the user
F16B 41/00 - Measures against loss of bolts, nuts, or pins; Measures against unauthorised operation of bolts, nuts, or pins
G07C 5/08 - Registering or indicating performance data other than driving, working, idle, or waiting time, with or without registering driving, working, idle, or waiting time
B60C 9/00 - Reinforcements or ply arrangement of pneumatic tyres
A connector is provided for tensioning a guy line and connecting the guy line to a ground anchor or a tower. The connector may include a first body and a second body connected together by two or more threaded rods. The first body is connected to the ground anchor or the tower. The second body has a tapered cavity extending therethrough. The guy line extends through the tapered cavity, and wedges with a first and second inner arcuate surface that are vertically offset from one another are pushed into the tapered cavity. The first arcuate inner surface and the second arcuate inner surface may grip the guy line after the wedges have been pushed into the tapered cavity, while the vertical offsetting of the second arcuate inner surface reduces that stress on the guy line at an end of wedges. The first and second bodies may be drawn toward each other to tension the guy line.
F16G 11/04 - Means for fastening cables or ropes to one another or to other objects; Caps or sleeves for fixing on cables or ropes with wedging action, e.g. friction clamps of grommet-thimble type
F16G 11/12 - Connections or attachments, e.g. turnbuckles, adapted for straining of cables, ropes or wire
An inventory management and scheduling toll provides improved tracking of products as they are processed through a series of processing stations. The inventory management and scheduling toll further provides features for modifying workflows, selecting transporting options, and assigning alerts to appropriate personnel.
Pump systems and methods are disclosed for removing liquid for hand-portable containers. The pump systems include a moveable piston housed in a main chamber and inlet and outlet valves located at one end of the main chamber, where the inlet and outlet valves open and close in response to movement of the piston.
06 - Common metals and ores; objects made of metal
09 - Scientific and electric apparatus and instruments
12 - Land, air and water vehicles; parts of land vehicles
17 - Rubber and plastic; packing and insulating materials
20 - Furniture and decorative products
Goods & Services
Compressed air components for transportation vehicles, namely, metal fittings and couplings; parts for trucks, namely, couplings with metal fittings installed on the air supply lines of a truck to allow the user the necessary leverage to couple and uncouple the air lines Vehicle brake controls; electrical connectors and junction boxes for use on over-the-road trailers; coiled electrical wire with attached plug and receptacle for connecting the electrical systems of tractors and trailers Air brake line fitting repair kit for vehicle air brake lines; compressed air components for transportation vehicles, namely, gladhands and seals for gladhands Compressed air components for transportation vehicles, namely, rubber hose and plastic hose assemblies Non-metal clamps used to suspend air and electrical lines on trucks and trailers
43.
3D printable hard ferrous metallic alloys for powder bed fusion
The present invention relates to alloy compositions for 3D metal printing procedures which provide metallic parts with high hardness, tensile strengths, yield strengths, and elongation. The alloys include Fe, Cr and Mo and at least three or more elements selected from C, Ni, Cu, Nb, Si and N. Ni may be replaced with Mn. As built parts indicate a tensile strength of at least 1000 MPa, yield strength of at least 640 MPa, elongation of at least 3.0% and hardness (HV) of at least 375.
Fasteners are disclosed for use with multiple standard torque delivery tools. The fasteners include several different torque bearing portions for use with different torque delivery tools, as well as non-torque bearing portions disposed between torque bearing portions.
A capped fastener is provided with two outer flanges and a groove therebetween. The cap is crimped around the first outer flange without covering the second outer flange. The end of the cap is crimped in a groove between the first and second outer flanges. A crimping tool and method of crimping are also provided for crimping the end of a cap into a groove between two outer flanges.
B60B 3/16 - Attaching disc body to hub by bolts or the like
B21D 39/04 - Application of procedures in order to connect objects or parts, e.g. coating with sheet metal otherwise than by plating; Tube expanders of tubes with rods
The present invention is directed to a gladhand connector having multiple ports and an integrated filter. The connector has a base that includes an air hose connector clamp on a first surface, and a first access port extending from the first surface toward a second surface, and a second access port on a bottom surface. The access ports are in fluid communication with an intermediate conduit configured to direct air received from an air hose through the housing. The connector also comprises a receptacle adjacent the first access port and in fluid communication with one of the access ports. The receptacle is configured to receive a pressure sensitive, removable and replaceable filter assembly that is configured to filter debris. The filter assembly is displaceable by air pressure of received air. The connector further comprises a mounting bracket configured to be attached to a vehicle.
The present invention is directed to a gladhand connector having multiple ports and an integrated filter. The connector has a base that includes an air hose connector clamp on a first surface, and a first access port extending from the first surface toward a second surface, and a second access port on a bottom surface. The access ports are in fluid communication with an intermediate conduit configured to direct air received from an air hose through the housing. The connector also comprises a receptacle adjacent the first access port and in fluid communication with one of the access ports. The receptacle is configured to receive a pressure sensitive, removable and replaceable filter assembly that is configured to filter debris. The filter assembly is displaceable by air pressure of received air. The connector further comprises a mounting bracket configured to be attached to a vehicle.
The present disclosure relates to a mounting base for a crossarm and the crossarm. The mounting base may include a front-facing fastening surface, a rear-facing surface, and an opening formed between the front-facing fastening surface and the rear-facing surface, where the opening comprises a generally reverse L-Shaped geometry that extends through an entire width of the mounting base. The crossarm may include a first section and a second section that are oriented perpendicularly to each other, where the first section and second section are composed of composite material that contains a plurality of fibers within the composite material.
The present disclosure relates to a mounting base for a crossarm and the crossarm. The mounting base may include a front-facing fastening surface, a rear-facing surface, and an opening formed between the front-facing fastening surface and the rear-facing surface, where the opening comprises a generally reverse L-Shaped geometry that extends through an entire width of the mounting base. The crossarm may include a first section and a second section that are oriented perpendicularly to each other, where the first section and second section are composed of composite material that contains a plurality of fibers within the composite material.
Fasteners are disclosed for reducing mass of the fastener, while being configured for use with standard torque delivery tools. The fasteners include non-torque bearing surfaces disposed between torque bearing surfaces.
06 - Common metals and ores; objects made of metal
09 - Scientific and electric apparatus and instruments
Goods & Services
Manhole and cable guards of metal, guy anchors of metal, carriage bolts of metal, washer bolts of metal, thimble-eye bolts of metal, lag screws of metal, bridle rings of metal, drive pins of metal, support straps of metal, cable anchors of metal, clamp anchors of metal, sealing washers of metal, toggle bolts of metal, bonding ribbon of metal, cable damper of metal, manhole cover hooks of metal, washers of metal, clamps of metal for supporting wires on utility poles, brackets of metal for securing signs to utility poles, cable racks of metal for receiving cable supports in a manhole, supports of metal for use between cable clamps and utility poles for holding overhead cable, ladder supports of metal, leaded throwing weight, drive hooks of metal, and manhole platform supports of metal; Pole line hardware, drop line hardware, and bonding hardware for use in the telephone, CATV, and SATV industries, namely, metal brackets, metal fasteners, metal braces, metal straps, and metal pole guards for telephone, cable and satellite lines, and metal hooks Electrical switches, led display lamps, electrical couplers, connectors, electrical connecting and terminal blocks, conduits, terminal wire, automatic shut-off valves, pressure testing valves, ground wire, electrical power cord, conduit plugs, electrical wire and regulators, electrical bonding ribbon for providing electrical resistance connections for bonding splices, and ground connectors for providing an electrical connection between utility wires and grounding rods or grid systems; Pole line hardware, drop line hardware, and bonding hardware for use in the telephone, CATV, and SATV industries, namely, cable connectors, grounding clamps, clips, and straps for use as parts and fittings for coaxial cable
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
40 - Treatment of materials; recycling, air and water treatment,
42 - Scientific, technological and industrial services, research and design
Goods & Services
Materials for use in additive manufacturing, namely, metal particulates; common metal powder, wire, and sheet steel for use as materials in additive manufacturing; metal goods and parts produced through additive manufacturing, namely, nozzles of metal, namely, spray nozzles made of metal for commercial or industrial use, reinforcing materials of metal for pipes, steel tubes, steel pipes, tubes of metal, pipes of metal, valves of metal other than parts of machines, injection molds of metal not being parts of machines, metal die castings and metal permanent mold castings, metallic mining parts, namely, metal mining screens, metal mining filters and metal hinges for automobiles Metal goods and parts produced through additive manufacturing, namely, metal-working machine tools, hand tools, namely, bending machines for metal working, power-driven wrenches and bits, namely, mining bits, power drill bits and drill bits for rock drilling, metal forming tools, namely, bending machines, machine tools for forming and swaging of metal, hydroforming machines, rolling machines for rolling metals, roll forming machines, machine tools for swaging of metal, dies made of metal being parts of machines, namely, coining dies, dies for use with machine tools, cutting dies, dies for wire drawing, extrusion dies for use with machine tools, extrusion dies for metal extrusion machines, metal piercing dies, powder metallurgy dies, roll bender dies, forming dies, shearing dies, swaging dies, forging dies for metal forging machines, molds being parts of machines for the manufacture of a wide variety of goods, namely, molds of metal, compression molds as parts of machine tools, extrusion molds for metal extrusion machines, injection molds being parts of machines, metal thermoforming molds, blow molding machines, metal transfer molds, die casting molds, centrifugal casting molds and permanent mold casting dies, metallic mining parts, namely, power cutting tools for metalworking and mining, crushing tools for mechanical crushing machines, grinding tools for grinding machines, power-operated metal working machine tools, namely, drilling tools, power-operated impact tools, namely, drilling impact tools, impact wrenches and impact mills, pump impellers, stators being parts of machines, gears for machines, industrial machine parts to protect operators from injury, namely, machine guards and safety guards, machine parts, namely, bearings, wear plates and wear pipes, machine tools for the cutting and forming of materials, and, metallic automotive parts, namely, pump impellers and engine bearings Providing for others additive manufacturing services for the production of three-dimensional molds and cores for casting three-dimensional objects in the field of industrial and commercial use; providing for others additive manufacturing services for the production of three-dimensional objects using metal particulates in the field of industrial and commercial use; providing for others additive manufacturing services for the production of three-dimensional objects in the field of industrial and commercial use Providing custom design and technical product development and engineering process development consultation services to others for the production of three-dimensional objects by additive manufacturing; providing information, advice, support and consultancy services relating to the aforesaid services in this class; product research and development services for designing new metal alloys
A wheel fastener alarm is provided with a fastener body, a cap covering the fastener body, a sensor array disposed within the fastener body, and a cover disposed over an opening in the fastener body and a hole in the cap.
F16B 41/00 - Measures against loss of bolts, nuts, or pins; Measures against unauthorised operation of bolts, nuts, or pins
G08B 25/00 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems
G08B 25/10 - Alarm systems in which the location of the alarm condition is signalled to a central station, e.g. fire or police telegraphic systems characterised by the transmission medium using wireless transmission systems
G07C 5/08 - Registering or indicating performance data other than driving, working, idle, or waiting time, with or without registering driving, working, idle, or waiting time
55.
3D printable hard ferrous metallic alloys for powder bed fusion
The present invention relates to alloy compositions for 3D metal printing procedures which provide metallic parts with high hardness, tensile strengths, yield strengths, and elongation. The alloys include Fe, Cr and Mo and at least three or more elements selected from C, Ni, Cu, Nb, Si and N. As built parts indicate a tensile strength of at least 1000 MPa, yield strength of at least 640 MPa, elongation of at least 3.0% and hardness (HV) of at least 375.
C21D 8/02 - Modifying the physical properties by deformation combined with, or followed by, heat treatment during manufacturing of plates or strips
B23K 26/00 - Working by laser beam, e.g. welding, cutting or boring
B22F 9/08 - Making metallic powder or suspensions thereof; Apparatus or devices specially adapted therefor using physical processes starting from liquid material by casting, e.g. through sieves or in water, by atomising or spraying
B22F 1/00 - Metallic powder; Treatment of metallic powder, e.g. to facilitate working or to improve properties
C22C 33/02 - Making ferrous alloys by powder metallurgy
56.
Fitting with a collar for a power transmission system
The present disclosure provides a fitting for a power transmission system. The fitting may include a first end configured to couple to an end of an insulator, a second end configured to couple to a power line, a collar located between the first end and the second end, and a neck located between the collar and the first end. An outer diameter of the collar may be greater than an outer diameter of the neck. A power transmission system with a fitting and corona ring assembly is also provided.
The present disclosure provides a stringing block. The stringing block may include a sheave with a circumferential groove with a pair of opposed walls. The opposed walls may extend away from the base of the groove to a flair point at a first angle. The opposed walls may extend away from the flair point to a rim at a second angle that is less than the first angle.
H02G 1/00 - Methods or apparatus specially adapted for installing, maintaining, repairing, or dismantling electric cables or lines
H02G 1/02 - Methods or apparatus specially adapted for installing, maintaining, repairing, or dismantling electric cables or lines for overhead lines or cables
H02G 1/04 - Methods or apparatus specially adapted for installing, maintaining, repairing, or dismantling electric cables or lines for overhead lines or cables for mounting or stretching
H02G 7/00 - Overhead installations of electric lines or cables
H01R 39/00 - Rotary current collectors, distributors or interrupters
H01B 13/00 - Apparatus or processes specially adapted for manufacturing conductors or cables
A capped fastener is provided with deflected projections on the nut body for securing a cap on the nut body. The deflected projections fit within a double walled edge of the cap. The projections are deflected through a simple method during the assembly process.
B60B 7/02 - Wheel cover discs, rings, or the like, for ornamenting, protecting, or obscuring, wholly or in part, the wheel body, rim, hub, or tyre sidewall made essentially in one part
A nut fastener is provided for locking the nut to prevent inadvertent loosening of the nut. The nut fastener is particularly useful for tightening a wheel onto an axle. The nut fastener includes a nut, a collar and a retaining ring. The nut is unlocked by pushing on an engagement surface of the collar or by riding ratchet teeth over each other. When the collar is released, the collar locks against the nut to resist rotation of the nut.
F16B 37/12 - Nuts or like thread-engaging members with thread-engaging surfaces formed by inserted coil-springs, discs, or the like; Independent pieces of wound wire used as nuts; Threaded inserts for holes
F16B 39/26 - Locking of screws, bolts, or nuts in which the locking takes place during screwing down or tightening by means of washers, spring washers, or resilient plates that lock against the object with spring washers fastened to the nut or bolt-head
A fastener assembly comprising a threaded component and a washer, wherein the bearing surfaces between the threaded component and washer each include helically inclined surface segments such that the clamp load exerted on the washer by the threaded component alternates between being increased and being decreased during rotation of the nut in a single direction.
F16B 39/24 - Locking of screws, bolts, or nuts in which the locking takes place during screwing down or tightening by means of washers, spring washers, or resilient plates that lock against the object
F16B 39/282 - Locking by means of special shape of work-engaging surfaces, e.g. notched or toothed nuts
61.
LAYERED CONSTRUCTION OF IN-SITU METAL MATRIX COMPOSITES
The present disclosure is directed at alloys and method for layer-by-layer deposition of metallic alloys on a substrate to produce a metallic part. Applications for the metallic parts include pumps, pump parts, valves, molds, bearings, cutting tools, filters or screens.
The present disclosure is directed at alloys and method for layer-by-layer deposition of metallic alloys on a substrate to produce a metallic part. Applications for the metallic parts include pumps, pump parts, valves, molds, bearings, cutting tools, filters or screens.
C22C 33/02 - Making ferrous alloys by powder metallurgy
B22F 3/00 - Manufacture of workpieces or articles from metallic powder characterised by the manner of compacting or sintering; Apparatus specially adapted therefor
B33Y 70/00 - Materials specially adapted for additive manufacturing
B22F 3/24 - After-treatment of workpieces or articles
B22F 7/04 - Manufacture of composite layers, workpieces, or articles, comprising metallic powder, by sintering the powder, with or without compacting of composite layers with one or more layers not made from powder, e.g. made from solid metal
B22F 7/06 - Manufacture of composite layers, workpieces, or articles, comprising metallic powder, by sintering the powder, with or without compacting of composite workpieces or articles from parts, e.g. to form tipped tools
Metallic alloys and methods for the preparation of free-standing metallic materials in a layerwise manner. The resulting layerwise construction provides a metallic skeleton of selected porosity which may be infiltrated with a second metal to provide a free-standing material that has a volume loss of less than or equal to 130 mm3 as measured according to ASTM G65-04(2010).
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
40 - Treatment of materials; recycling, air and water treatment,
42 - Scientific, technological and industrial services, research and design
Goods & Services
Materials for use in additive manufacturing, namely, metal particulates; common metal powder, wire, and sheet steel for use as materials in additive manufacturing; metal goods and parts produced through additive manufacturing, namely, nozzles of metal, namely, spray nozzles made of metal for commercial or industrial use, reinforcing materials of metal for pipes, steel tubes, steel pipes, tubes of metal, pipes of metal, valves of metal other than parts of machines, injection molds of metal not being parts of machines, metal die castings and metal permanent mold castings, metallic mining parts, namely, metal mining screens, metal mining filters and metal hinges for automobiles Metal goods and parts produced through additive manufacturing, namely, metal-working machine tools, hand tools, namely, bending machines for metal working, power-driven wrenches and bits, namely, mining bits, power drill bits and drill bits for rock drilling, metal forming tools, namely, bending machines, machine tools for forming and swaging of metal, hydroforming machines, rolling machines for rolling metals, roll forming machines, machine tools for swaging of metal, dies made of metal being parts of machines, namely, coining dies, dies for use with machine tools, cutting dies, dies for wire drawing, extrusion dies for use with machine tools, extrusion dies for metal extrusion machines, metal piercing dies, powder metallurgy dies, roll bender dies, forming dies, shearing dies, swaging dies, forging dies for metal forging machines, molds being parts of machines for the manufacture of a wide variety of goods, namely, molds of metal, compression molds as parts of machine tools, extrusion molds for metal extrusion machines, injection molds being parts of machines, metal thermoforming molds, blow molding machines, metal transfer molds, die casting molds, centrifugal casting molds and permanent mold casting dies, metallic mining parts, namely, power cutting tools for metalworking and mining, crushing tools for mechanical crushing machines, grinding tools for grinding machines, power-operated metal working machine tools, namely, drilling tools, power-operated impact tools, namely, drilling impact tools, impact wrenches and impact mills, pump impellers, stators being parts of machines, gears for machines, industrial machine parts to protect operators from injury, namely, machine guards and safety guards, machine parts, namely, bearings, wear plates and wear pipes, machine tools for the cutting and forming of materials, and, metallic automotive parts, namely, pump impellers and engine bearings Providing for others additive manufacturing services for the production of three-dimensional molds and cores for casting three-dimensional objects in the field of industrial and commercial use; providing for others additive manufacturing services for the production of three-dimensional objects using metal particulates in the field of industrial and commercial use; providing for others additive manufacturing services for the production of three-dimensional objects in the field of industrial and commercial use Providing custom design and technical product development and engineering process development consultation services to others for the production of three-dimensional objects by additive manufacturing; providing information, advice, support and consultancy services relating to the aforesaid services in this class; product research and development services for designing new metal alloys
The present disclosure is directed at alloys and method for layer-by-layer deposition of metallic alloys on a substrate. The resulting deposition provides for relatively high hardness metallic parts with associated wear resistance. Applications for the metallic parts include pumps, valves and/or bearings.
C22C 38/38 - Ferrous alloys, e.g. steel alloys containing chromium with more than 1.5% by weight of manganese
C22C 38/36 - Ferrous alloys, e.g. steel alloys containing chromium with more than 1.7% by weight of carbon
C22C 38/34 - Ferrous alloys, e.g. steel alloys containing chromium with more than 1.5% by weight of silicon
C22C 38/32 - Ferrous alloys, e.g. steel alloys containing chromium with boron
C22C 38/26 - Ferrous alloys, e.g. steel alloys containing chromium with niobium or tantalum
C22C 38/22 - Ferrous alloys, e.g. steel alloys containing chromium with molybdenum or tungsten
C22C 38/04 - Ferrous alloys, e.g. steel alloys containing manganese
C22C 38/02 - Ferrous alloys, e.g. steel alloys containing silicon
B32B 15/01 - Layered products essentially comprising metal all layers being exclusively metallic
B22F 3/105 - Sintering only by using electric current, laser radiation or plasma
B22F 7/02 - Manufacture of composite layers, workpieces, or articles, comprising metallic powder, by sintering the powder, with or without compacting of composite layers
B22F 7/04 - Manufacture of composite layers, workpieces, or articles, comprising metallic powder, by sintering the powder, with or without compacting of composite layers with one or more layers not made from powder, e.g. made from solid metal
B22D 19/00 - Casting in, on, or around, objects which form part of the product
B22D 25/00 - Special casting characterised by the nature of the product
Alloys and method for layer-by-layer deposition of metallic alloys on a substrate are provided. The resulting deposition provides for relatively high hardness metallic parts with associated wear resistance.. A method of layer-by-layer construction of a metallic part comprises supplying an alloy in particle form comprising Fe at 54.0 to 78.0 wt. %, B at 3.0 to 5.0 wt. %, Cr at 14.0 to 20.0 wt. %, C at 0.5 to 7.0 wt. %, optionally Mo at up to 11.0 wt. %, optionally Mn at up to 2.5 wt. %, optionally Nb at up to 4.5 wt. %, optionally Si at up to 2.0 wt. %, and optionally W at up to 7.0 wt. %; supplying a substrate; applying one or more layers of said alloy onto said substrate by melting said alloy into a molten state; and cooling and forming a solidified layer.
A bracket is provided that may be welded to the interior surface of a vehicle fascia. The bracket has a flange and a mounting boss. The flange is slotted to form flexible fingers that conform to the interior surface of the fascia. The fingers are welded to the fascia to attach the bracket to the interior surface of the fascia. A vehicle component, such as an impact sensor, is attached to the mounting boss to secure it to the fascia.
B60R 19/24 - Arrangements for mounting bumpers on vehicles
B60R 19/48 - Bumpers, i.e. impact receiving or absorbing members for protecting vehicles or fending off blows from other vehicles or objects combined with, or convertible into, other devices or objects, e.g. bumpers combined with road brushes, bumpers convertible into beds
B60R 21/013 - Electrical circuits for triggering safety arrangements in case of vehicle accidents or impending vehicle accidents including means for detecting collisions, impending collisions or roll-over
A modulator valve for use with the auxiliary axle anti-lock braking system of a truck, configured and constructed such that no braking application pressure signal is permitted to be delivered to the auxiliary axle anti-lock braking system when the auxiliary axle is in the lifted position, and a modulated braking application pressure signal is delivered to the auxiliary axle anti-lock braking system when the auxiliary axle is not in the lifted position. The modulated braking application pressure depends upon the pressure sensed from ride springs of the suspension system of the truck.
B60T 15/36 - Other control devices or valves characterised by definite functions
B60T 15/18 - Triple or other relay valves which allow step-wise application or release and which are actuated by brake-pipe pressure variation to connect brake cylinders or equivalent to compressed-air or vacuum source or atmosphere
B60T 8/18 - Arrangements for adjusting wheel-braking force to meet varying vehicular or ground-surface conditions, e.g. limiting or varying distribution of braking force responsive to vehicle weight or load, e.g. load distribution
B60T 8/34 - Arrangements for adjusting wheel-braking force to meet varying vehicular or ground-surface conditions, e.g. limiting or varying distribution of braking force responsive to a speed condition, e.g. acceleration or deceleration having a fluid pressure regulator responsive to a speed condition
06 - Common metals and ores; objects made of metal
Goods & Services
Materials for use in additive manufacturing, namely, metal particulates; metal powder, wire, and sheet steel for use as materials in additive manufacturing; metal goods and parts produced through additive manufacturing, namely, injection molds of metal, not being parts of machines, metal die castings and metal permanent mold castings, metallic mining parts, namely, metal mining screens, and metal hinges for automobiles
A locking fastener is provided that may be automatically unlocked and locked by sliding a wrench onto the nut and removing the wrench. The fastener includes a biased arm extending outward from a wrench bearing surface that presses against a pawl. The pawl includes ratchet teeth that engage ratchet teeth of a retainer to lock the fastener. The fastener is unlocked by compressing the arm with a wrench.
A nut fastener is provided for locking the nut to prevent inadvertent loosening of the nut. The nut fastener is particularly useful for tightening a wheel onto an axle. The nut fastener includes a nut, a collar and a retaining ring. The nut is unlocked by pushing on an engagement surface of the collar or by riding ratchet teeth over each other. When the collar is released, the collar locks against the nut to resist rotation of the nut.
F16B 39/26 - Locking of screws, bolts, or nuts in which the locking takes place during screwing down or tightening by means of washers, spring washers, or resilient plates that lock against the object with spring washers fastened to the nut or bolt-head
F16B 39/12 - Locking of screws, bolts, or nuts in which the locking takes place after screwing down by means of locknuts
A side skirt assembly for a trailer of a tractor-trailer includes a skirt panel and a plurality of skirt mounts that couple the skirt panel to the frame of the trailer. The skirt panel can be formed by a layered composite formed of alternating layers of fiberglass and layers containing recycled fiberglass. The position of the skirt mount can be laterally adjusted along the trailer frame whereby the skirt panel can be mounted to the trailer in more than one lateral position. Additionally, the skirt panel can include a track extending along at least a portion of the skirt panel length, and the track can slide relative to the skirt mount to adjust the longitudinal position of the skirt panel on the trailer during assembly.
A side skirt assembly for a trailer of a tractor-trailer includes a skirt panel and a plurality of skirt mounts that couple the skirt panel to the frame of the trailer. The skirt panel can be formed by a layered composite formed of alternating layers of fiberglass and layers containing recycled fiberglass. The position of the skirt mount can be laterally adjusted along the trailer frame whereby the skirt panel can be mounted to the trailer in more than one lateral position. Additionally, the skirt panel can include a track extending along at least a portion of the skirt panel length, and the track can slide relative to the skirt mount to adjust the longitudinal position of the skirt panel on the trailer during assembly.
03 - Cosmetics and toiletries; cleaning, bleaching, polishing and abrasive preparations
06 - Common metals and ores; objects made of metal
09 - Scientific and electric apparatus and instruments
12 - Land, air and water vehicles; parts of land vehicles
17 - Rubber and plastic; packing and insulating materials
20 - Furniture and decorative products
Goods & Services
[ Degreasing preparations not used in manufacturing processes for cleaning purposes; granular absorbent agricultural based composition comprised primarily of coconut husks for absorbing hazardous liquid spills from floors ] Compressed air components for transportation vehicles, namely, metal fittings and couplings; parts for trucks, namely, couplings with metal fittings installed on the air supply lines of a truck to allow the user the necessary leverage to couple and uncouple the air lines Vehicle brake controls; electrical connectors and junction boxes for use on over-the-road trailers; coiled electrical wire with attached plug and receptacle for connecting the electrical systems of tractors and trailers Air brake line fitting repair kit for vehicle air brake lines; compressed air components for transportation vehicles, namely, gladhands and seals for gladhands Compressed air components for transportation vehicles, namely, rubber hose and plastic hose assemblies Non-metal clamps used to suspend air and electrical lines on trucks and trailers
A motor vehicle mud flap is a plate-like body having a suspension section, a quadrant section, and an extension section. The suspension section is adapted for attachment to a mud flap bracket for suspension of the mud flap therefrom. The quadrant section is coupled with the suspension section and has an array of elongate through-openings. The extension section is coupled with the quadrant section and has an array of elongate through-openings. The array of elongate through-openings is defined by alternating recesses and ribs in parallel and longitudinal disposition. Each recess is configured as a pair of opposed elongate shallow recesses fluidly coupled by an elongate through-opening having a width less than the width of each recess. Water and air can flow through the recesses, and debris larger than the width of the through-openings is deflected by the mud flap.
A roll-up door has a plurality of panels and a plurality of roller assemblies mounted to ends of the panels for mounting the panels in channels. At least some of the panels are formed of blow-molded thermoplastic material and have a relatively flat outside face and an inside face including ribs that extend longitudinally and transversely on the panel. A reinforced panel of thermoplastic material is made by blow molding a panel with a thermoplastic material to form a relatively flat outside face and a ribbed inside face, and with elongated channels along upper and lower walls thereof. The panel is trimmed while it is still warm to open the channels at one end. While the panel is still warm, reinforcing members are inserted into the elongated channels. The panels can be cooled to shrink the channels onto the reinforcing members.
A roll-up door has a plurality of panels and a plurality of roller assemblies mounted to ends of the panels for mounting the panels in channels. At least some of the panels are formed of blow-molded thermoplastic material and have a relatively flat outside face and an inside face including open channels that extend longitudinally and transversely on the panel. A reinforced panel of thermoplastic material is made by blow molding a panel with a thermoplastic material to form a relatively flat outside face and a ribbed inside face, and with elongated channels along upper and lower portions thereof. The panel may be trimmed while it is still warm to open the channels at one end. While the panel is still warm, reinforcing members may be inserted into the elongated channels. The panels may be cooled to shrink the channels onto the reinforcing members.
Capped nuts are provided with an polymer in the top portion of the capped nut. The polymer may be disposed between the inner surface of the cap and a nut body. The polymer may extend into a top opening in the nut body and contact an inner wall of the opening in the nut body.
A mud flap bracket assembly comprises a functional frame bracket assembly and one or more interchangeable bracket covers. The frame bracket assembly has unitary frame bracket that is formed from a sheet metal blank that is configured to form and integral spring mount and integral slots to mount a frame seat. The frame bracket has integral slots that mount mud flap clips that are adjustable within the slots for mounting mud flaps of different hole configurations. The frame bracket assembly is assembled with integral fasteners and without welds.
Fasteners are provided with a polymer layer covering a body. The polymer layer may improve the aesthetics of the fastener and may be colored to provide various color options. The polymer layer covers at least part of a wrench bearing surface.
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Land vehicle parts, namely, hinges for roll-up doors for trucks and trailers; roll-up doors for trucks and trailers and component parts therefor; mud flaps for trucks and trailers; mud flap mounting brackets and mounting adapters for use on trucks, trailers, buses and automobiles; vehicle fender mounting brackets and mounting adapters; vehicle fender mounting kits composed primarily of isolators, mounting hardware and mounting brackets; motor vehicle parts, namely, plastic fenders, mounting systems comprised of molded teeth, gears and clamps and vibration isolators
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Land vehicle parts, namely, hinges for roll-up doors for trucks and trailers; roll-up doors for trucks and trailers and component parts therefor; mud flaps for trucks and trailers; mud flap mounting brackets and mounting adapters for use on trucks, trailers, buses and automobiles; vehicle fender mounting brackets and mounting adapters; vehicle fender mounting kits composed primarily of isolators, mounting hardware and mounting brackets; motor vehicle parts, namely, plastic fenders, mounting systems comprised of molded teeth, gears and clamps and vibration isolators
12 - Land, air and water vehicles; parts of land vehicles
Goods & Services
Land vehicle parts, namely, hinges for roll-up doors for trucks and trailers; roll-up doors for trucks and trailers and component parts therefor; mud flaps for trucks and trailers; mud flap mounting brackets and mounting adapters for use on trucks, trailers, buses and automobiles; vehicle fender mounting brackets and mounting adapters; vehicle fender mounting kits composed primarily of isolators, mounting hardware and mounting brackets; motor vehicle parts, namely, plastic fenders, mounting systems comprised of molded teeth, gears and clamps and vibration isolators
A hood bumper assembly for automotive vehicle hoods is provided that can manage impact energy from a collision with a pedestrian. The hood bumper assembly may have a bumper with a cushion that is threaded to a retainer attached to the vehicle frame. The threaded engagement between the bumper and the retainer may have a percentage of thread engagement that is less than industry standards so that the threads skip without substantially deforming when an impact load is applied to the vehicle hood.
A precast concrete slab connector for connecting two adjacent slabs in edge-by-edge juxtaposition, each with a recess in registry with a recess in and an adjacent slab. A pair of anchor plates are positioned the slab recesses and a shear plate spans the slabs recesses and overlies the anchor plates. The shear plate has openings that are in registry with one of an anchor plate opening. Multiple fasteners are extend through the openings in the anchor plates and the shear plates and include removable retainers that clamp the shear plates and the anchor plates together. The fasters can be cast in part into each adjacent slab. Serration can be provided with facing surfaces of the anchor plates and the shear plate or on facing surfaces of the shear plate and washers that are mounted on the fastener.
E04B 1/61 - Connections for building structures in general of slab-shaped building elements with each other
E04B 1/04 - Structures consisting primarily of load-supporting, block-shaped or slab-shaped elements the elements consisting of concrete, e.g. reinforced concrete, or other stone-like material
A receptacle, comprising, a sleeve provided with a plurality of electrical connections, a terminal assembly that is electrically connected to a wiring interface, the wiring interface is provided with a seal that resists the entry of moisture, a container that is provided with a nose box and a retractable cover; and a circuit board assembly that includes a trace that carries electrical current.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
08 - Hand tools and implements
12 - Land, air and water vehicles; parts of land vehicles
20 - Furniture and decorative products
22 - Rope, netting, tents, awnings, sails and sacks; padding and stuffing materials
Goods & Services
Metal fasteners, namely, threaded fasteners, metal wheel fasteners, nuts, nuts for special applications, nuts for mounting axle bearings, nuts that include nylon and nylon rings, nuts having red nylon permanently bonded to the threads, two-piece nuts, nut-washer assemblies, flange nuts, locking nuts, clinch nuts, acorn nuts, axle nuts, fastener nuts, weld nuts, weld nuts [, semi-finished nuts, flange screws, lock screws, self-locking and self-sealing screw threaded devices, bolts, locking bolts, bolts with special thread configurations, nut and bolt assemblies, washers, metal nuts and nut washer assemblies for vehicle suspension systems; metal trunk tie downs ] Mining and road construction cutting bits [ Ratchet components for handheld ratchets, namely, formed ratchet heads ] [ Vehicle suspension system components, namely, suspension linkages, stabilizer bar links, suspension arms, ] ball joints, [ flange housings, suspension housings, stabilizer bar locking collars; replacement parts for vehicle suspension system components, namely, bushings, grommets, ] ball studs [, ball joint sockets ] [, boots, suspension shafts, spacers, and bolts; brake pistons; gear blanks for vehicles; structural components of land vehicles, namely, framer spacers ] Non-metal fasteners, namely, nuts, u-nuts, nylon nuts, and nylon u-nuts [ ; plastic support collars for use with ball studs ] [ non-metal tie downs for trunks; non-metal convenience net retainer hooks for use with fitted cargo net ]
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
08 - Hand tools and implements
12 - Land, air and water vehicles; parts of land vehicles
20 - Furniture and decorative products
22 - Rope, netting, tents, awnings, sails and sacks; padding and stuffing materials
Goods & Services
Metal fasteners, namely, threaded fasteners, metal wheel fasteners, nuts, nuts for special applications, nuts for mounting axle bearings, nuts that include nylon and nylon rings, nuts having red nylon permanently bonded to the threads, two-piece nuts, nut-washer assemblies, flange nuts, locking nuts, clinch nuts, acorn nuts, axle nuts, fastener nuts, weld nuts, weld nuts, semi-finished nuts, flange screws, lock screws, self-locking and self-sealing screw threaded devices, bolts, locking bolts, bolts with special thread configurations, nut and bolt assemblies, washers, metal nuts and nut washer assemblies for vehicle suspension systems; metal trunk tie downs Mining and road construction cutting bits Ratchet components for handheld ratchets, namely, formed ratchet heads Vehicle suspension system components, namely, suspension linkages,[ stabilizer bar links, suspension arms, ] ball joints, flange housings, suspension housings, [ stabilizer bar locking collars ] ; replacement parts for vehicle suspension system components, namely, [ bushings, grommets, ] ball studs [, ball joint sockets, boots, suspension shafts, spacers, and bolts; brake pistons ] ; gear blanks for vehicles [ ; structural components of land vehicles, namely, framer spacers ] Non-metal fasteners, namely, nuts, u-nuts, nylon nuts, and nylon u-nuts; plastic support collars for use with ball studs non-metal tie downs for trunks; non-metal convenience net retainer hooks for use with fitted cargo net
06 - Common metals and ores; objects made of metal
07 - Machines and machine tools
08 - Hand tools and implements
12 - Land, air and water vehicles; parts of land vehicles
20 - Furniture and decorative products
22 - Rope, netting, tents, awnings, sails and sacks; padding and stuffing materials
Goods & Services
Metal fasteners, namely, threaded fasteners, metal wheel fasteners, nuts, nuts for special applications, nuts for mounting axle bearings, nuts that include nylon and nylon rings, nuts having red nylon permanently bonded to the threads, two-piece nuts, nut-washer assemblies, flange nuts, locking nuts, clinch nuts, acorn nuts, axle nuts, fastener nuts, weld nuts, weld nuts, semi-finished nuts, flange screws, lock screws, self-locking and self-sealing screw threaded devices, bolts, locking bolts, bolts with special thread configurations, nut and bolt assemblies, washers, metal nuts and nut washer assemblies for vehicle suspension systems; metal trunk tie downs Mining and road construction cutting bits Ratchet components for handheld ratchets, namely, formed ratchet heads Vehicle suspension system components, namely, suspension linkages, [ stabilizer bar links, suspension arms, ] ball joints, flange housings, suspension housings, [ stabilizer bar locking collars; ] replacement parts for vehicle suspension system components, namely, [ bushings, grommets, ] ball studs, [ ball joint sockets, boots, suspension shafts, spacers, and bolts; brake pistons; ]gear blanks for vehicles [ ; structural components of land vehicles, namely, framer spacers ] Non-metal fasteners, namely, nuts, u-nuts, nylon nuts, and nylon u-nuts; plastic support collars for use with ball studs non-metal tie downs for trunks; non-metal convenience net retainer hooks for use with fitted cargo net
