The LED and/or laser projection light device has three major project parts including (a) light source (b) image-forming-unit (c) project/refractive lens to make desired enlarge projected image, patterns or light beams. The project light has at least one of inner optics-lens or optics-elements rotating to create the splendid lighted image or patterns or light-beam to emit to outer-cover. Further, The project light preferred have at least one of additional-functions built-in project light device select from (i) 2nd light source for preferred illumination function(s), (ii) glow, back light, (iii) 2nd or more project assemblies in one light device, (iv) other light functions, (v) candle light illumination, (vi) bulb illumination, (vii) desk top or floor light illumination, (viii) having battery or rechargeable battery or built-in/outside AC-to-DC circuit to get power source, (ix) apply the USB port or adaptor or connector or AC-plug wire to get power source, (x) steady, rotating, replaceable, detachable, movable 3 major project parts.
H04N 7/18 - Closed-circuit television [CCTV] systems, i.e. systems in which the video signal is not broadcast
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
H04N 5/235 - Circuitry for compensating for variation in the brightness of the object
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
H04N 5/232 - Devices for controlling television cameras, e.g. remote control
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 5/04 - Refractors for light sources of lens shape
A LED light with built-in Air flow device has AC-to-DC circuit to get DC current to supply power to LED or LEDs and-to charge inside rechargeable batteries and to the inside air flow related device or other product(s). The LED light connect IC and control circuit to make setting, changing, adjust of the said at least one of (A) LED(s) colors, brightness, on-off, duration, cycles, frequency, sequential, flashing, color changing, color selection, auto changing, or other LED light effects, (B) Air flow related parts to get desired speed of rotating fan or blade, on-off, duration, timer, countdown timer, or other desired air flow related function(s); by at least one of (1) trigger system, (2) switch, (3) sensor, (4) motion or moving or radar sensor, (5) IR or RF remote control system, (6) power fail sensor, (7) built-in Auto-Off-On or multiple selection positions switch, (8) other related LED or air flow or air-freshener or fragrance or essential oil diffusor parts or accessories; wherein the LED light connect with (i) AC power source by prongs with or without folding features, (ii) DC power from at least one outside transformer, power bank, DC power from cigarette-plug, USB related DC power source, DC power storage device, solar module, or DC generator.
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21V 13/02 - Combinations of only two kinds of elements
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
F21V 5/04 - Refractors for light sources of lens shape
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
COB (Chip On Board) cover-plate light has surface similar with house switch cover-plate with at least one of toggle switch, dimmer switch, round switch, rocket switch, twist switch, and switch cover-plate has built-in number of the COB light source(s) install on side of inner wall of COB light to emit the light inward through multiple reflection and refraction of light-beam to get even brightness emit out from front surface where has at least one of (1) at least one of optic treatments, opaque, whiten, and (2) at least one of heat-transfer, sticker, printing, painting the preferred design, art, cartoon, character, sport-team, clubs, school-team logo or arts of front surface.
F21K 9/69 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction - Details of refractors forming part of the light source
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
H01L 27/15 - Devices consisting of a plurality of semiconductor or other solid-state components formed in or on a common substrate including semiconductor components with at least one potential-jump barrier or surface barrier, specially adapted for light emission
F21V 19/00 - Fastening of light sources or lamp holders
4.
Quickly Charger USB device has separated distance away USB Unit(s)
A desktop USB device has power-wire(s) or storage-wire arrangement. The device has more than one separated distance away USB-Unit(s) by branch-wire(s) and have wire storage arrangement for at least one of an USB jump-wire, an AC power-wire, USB-charger wire or another charging related wire(s). The USB device and separated USB-Unit(s) to be installed on a desktop or floor at a hand-reachable distance from people, and install or attach anywhere by attachment so that there is no need for people to bend body or knee to get the USB-port(s) to charge i-phone or Tablet(s). The current invention use shortest #14 gauge AC wire for power strips and use long length of #18 gauge to supply DC power to USB ports built-in separated USB-unit(s) the charger. The USB-charger power-wire arrangement has by at least one main-wire and plurality of branch-wire(s) to connect with at least one of separated and distance away USB-Unit(s) incorporated with external USB-wire has at least 2 ends with male USB-plug to connect with each unit has at least one of female receiving USB-port(s) inside USB Unit(s), that can supply a desired output-current in the range of from 110 A to 50 A and at USB needed VDC by converting input AC power ranging from 110 VAC to 250 VAC. The USB device or power station may also optional to incorporate with at least one additional device such as at least one of (i) AC outlet, (2) sensor(s), (3) motion sensor, (4) remote controller, (5) time display, (6) LEDs, (7) IC, (8) 2nd LED(s) (9) Detector for charging status and system, (10) power fail device, (11) diffusor equipment, (12) color changing, color selection, function selection for LED(s) light illumination.
The Multiple functions LED nigh light not only offer LED illumination under predetermined colors, functions, effects including at least one of color-changing, color selection, functions selection with preferred switch, sensor, PIR sensor, radar sensor, rechargeable battery, power fail light, USB charging or be-charged system, outlets, audio device, surge/over heat/over charge/short-circuit protection, function selection between motion or non-motion or dust-to-dawn, or other preferred additional-functions list inside text below. The said multiple functions not only offer LED illumination but also offer at least one of additional-functions such As LED motion sensor night light have color-changing, color-selection, functions selection and the said additional-functions including power fail light and/or USB-charger or other preferred additional-functions such as outlets, or camera with wifi incorporate with download APP for wireless or remote control, adjustment, setting to offer people safety and multiple functions.
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 27/00 - Cable-stowing arrangements structurally associated with lighting devices, e.g. reels
F21K 9/235 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings - Details of bases or caps, i.e. the parts that connect the light source to a fitting; Arrangement of components within bases or caps
F21V 9/08 - Elements for modifying spectral properties, polarisation or intensity of the light emitted, e.g. filters for reducing intensity of light
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
A desktop USB device has power-wire(s) or storage-wire arrangement. The device has more than one separated distance away USB-Unit(s) by branch-wire(s) and have wire storage arrangement for at least one of an USB jump-wire, an AC power-wire, USB-charger wire or another charging related wire(s). The USB device and separated USB-Unit(s) to be installed on a desktop or floor at a hand-reachable distance from people, and install or attach anywhere by attachment so that there is no need for people to bend body or knee to get the USB-port(s) to charge i-phone or Tablet(s). The current invention use shortest #14 gauge AC wire for power strips and use long length of #18 gauge to supply DC power to USB ports built-in separated USB-unit(s) the charger. The USB-charger power-wire arrangement has by at least one main-wire and plurality of branch-wire(s) to connect with at least one of separated and distance away USB-Unit(s) incorporated with external USB-wire has at least 2 ends with male USB-plug to connect with each unit has at least one of female receiving USB-port(s) inside USB Unit(s), that can supply a desired output-current in the range of from 1.0 A to 50 A and at USB needed VDC by converting input AC power ranging from 110 VAC to 250 VAC. The USB device or power station may also optional to incorporate with at least one additional device such as at least one of (i) AC outlet, (2) sensor(s), (3) motion sensor, (4) remote controller, (5) time display, (6) LEDs, (7) IC, (8) 2nd LED(s) (9) Detecor for charging status and system, (10) power fail device, (11) diffusor equipment, (12) color changing, color selection, function selection for LED(s) light illumination. (13) other lights, (14) a power fail device, (15) a smell device, an (16) audio device, a video device.
F21S 8/00 - Lighting devices intended for fixed installation
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21V 13/02 - Combinations of only two kinds of elements
F21V 5/04 - Refractors for light sources of lens shape
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
The LED night light or cover light has multiple Functions has built-in LED(s) for pre-determined illumination shown on housing, window, hole(s) of night or cover light which connect by prong to an existing wall inner-kit's receptacle to get AC power source to circuit(s) for predetermined at least LED(s) illumination functions. The night or cover light further incorporate with at least one USB charger, Outlet(s), IC, photo sensor, motion sensor, power fail sensor, surge or other protection system.
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01R 27/02 - Coupling parts adapted for co-operation with two or more dissimilar counterparts for simultaneous co-operation with two or more counterparts
H01R 13/66 - Structural association with built-in electrical component
H01R 13/70 - Structural association with built-in electrical component with built-in switch
H01R 13/717 - Structural association with built-in electrical component with built-in light source
H01R 13/73 - Means for mounting coupling parts to apparatus or structures, e.g. to a wall
F21S 8/00 - Lighting devices intended for fixed installation
H02G 3/18 - Distribution boxes; Connection or junction boxes providing line outlets
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
A multiple function LED night light has at least one LED device with or without at least one additional function, such as an air-freshener adaptor device, sonic device, frequency device, sensor device, bug repeller device, second light device, timepiece, electric message device, timer device, temperature device, surge protection device, electric short circuit protection device, or base device for installation on an existing lamp socket, emergency light device, or any other electric device suitable for home use to keep people comfortable or safe. The LED device has a first optic element to change the narrow-viewing angle of an LED's spot-light beams into a wider-viewing angle, and a second optic element to help eliminate super bright lighted spots.
F21V 21/08 - Devices for easy attachment to a desired place
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 9/08 - Elements for modifying spectral properties, polarisation or intensity of the light emitted, e.g. filters for reducing intensity of light
F21V 19/00 - Fastening of light sources or lamp holders
F21K 9/235 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings - Details of bases or caps, i.e. the parts that connect the light source to a fitting; Arrangement of components within bases or caps
nd or more voltage DC to supply to at least one of (i) USB-charging port(s), (ii) “8’ light source(s), or optional (iii) IC, (iv) speaker, (v) audio device, (vi) radio, (vii) outlet(s), (viii) surge or other safety protection circuit, (ix) colorful LEDs or LED-bulb for accent light, wake-up light, sleep night light, (x) colorful LEDs for charging status or power on/off or am/pm or, other indicator purpose, (xi). Same AC-to-DC circuit and DC-to-DC circuit also apply to desk top LED light which has built-in plurality of LED(s) inside the LED(s) compartment or replaceable/detachable CFL or LED bulbs for desk top LED lighting device. Further, the device has built-in optional outlets to supply AC power to be-supplied products. The device has export power from USB-port is one of (a) min. 1 A or (b) 3.1 to 10 Amp or (c) 12 Watt to 60 Watt to make regular or quickly charging functions.
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
st AC directly though conductive parts to outlet-ports to supply AC to other device. Furthermore, the light device Optional can add other function(s) select from (a) Time piece related (b) Reflect Image (c) Power station (d) project image (e) heater (f) Air Flow (g) wireless communication (h) remote controller (g) APP controller (h) Blue-tooth controller.
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H01R 13/66 - Structural association with built-in electrical component
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
F21S 8/00 - Lighting devices intended for fixed installation
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 6/00 - Lighting devices intended to be free-standing
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
nd transformer to supply big Amperage and different working voltage to prevent from 1 transformer not only supply USB Charging-ports(s) but also Big Power consumption for LEDs or other light source or other functions need power.
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H01R 13/66 - Structural association with built-in electrical component
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
F21S 8/00 - Lighting devices intended for fixed installation
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 6/00 - Lighting devices intended to be free-standing
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
A night light includes a housing, AC-to-DC circuitry, at least two prongs configured to connect to a power source outlet, at least one LED, first and second optical elements for converting light beams from the LED into substantially uniform light emitted from the optical elements, a switch configured to manually select from a plurality of illumination modes, sensors to automatically select between the illumination modes, and means for wireless communication, and at least one second optical element. The LED might be a multi-color LED.
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H01R 13/66 - Structural association with built-in electrical component
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
13.
Desktop or floor LED lighting device has USB-port(s)
nd transformer to supply big Amperage and different working voltage to prevent from 1 transformer not only supply USB Charging-ports(s) but also Big Power consumption for LEDs or other light source or other functions need power.
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H01R 13/66 - Structural association with built-in electrical component
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
F21S 8/00 - Lighting devices intended for fixed installation
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 6/00 - Lighting devices intended to be free-standing
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
nd optics-lens with built-in texture or opaque or optics treatments. Night light has at least one of preferred (1) effects for color-changing, color selection, functions selection, and (2) addition parts or function(s) select from switch, motion sensor, PIR sensor, radar sensor, rechargeable battery, power fail light, USB charging or be-charged port(s) or system, outlets, audio device, surge/over heat/overcharge/short-circuit protection, function selection between motion or non-motion or dust-to-dawn, cameras, signal transmitter or receiver or extenders, or remotes, camera with wi-fi incorporate cloud, 3/4/5G internet or other Zig-Bee, Z-way, Wi-Fi extender, with download APP for wireless IR or RF remote control.
F21S 8/00 - Lighting devices intended for fixed installation
H01R 33/92 - Holders formed as intermediate parts for distributing energy in parallel through two or more counterparts at least one of which is attached to apparatus to be held
F21V 5/04 - Refractors for light sources of lens shape
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
A multiple function LED night light not only offers LED illumination with predetermined colors, functions, or effects, but also includes additional functions such as providing a power source, sensor(s), power fail functions, and wireless control functions. Lighting effects may also be achieved through the use of multiple optic or protective lenses that cause multiple reflections and/or refraction of light beams emitted by one or more single or multiple color LEDs.
F21S 8/00 - Lighting devices intended for fixed installation
F21V 5/04 - Refractors for light sources of lens shape
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21Y 113/13 - Combination of light sources of different colours comprising an assembly of point-like light sources
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
H01R 33/92 - Holders formed as intermediate parts for distributing energy in parallel through two or more counterparts at least one of which is attached to apparatus to be held
LED and/or laser outdoor projection light device having more than one inner and/or outer rotating optic-piece to create moving, changeable lighted image and/or pattern
An LED or/and Laser light device(s) connect with outlet or bulb-base or interchangeable or USB power source, which incorporates more than one geometric shapes of optics-piece including image-forming-piece and optics-lens(es) that said optics-lens(es) having at least one of reflective and/or refractive properties which has relative positions, distances, and/or orientations to LEDs and/or Laser light-source(s) and image-forming-piece to let light-beams reflect, retro-reflect, refract, or go through art, design, texture, treated area of said optics-lens and/or image-forming-piece, so the light-beam of the said LED or laser light-source at least reflected or/and refracted and/or traveling and/or passing through multiple times the said reflective and refractive optic lens(es) and/or art-areas, and/or image-forming-device to create or project lighted image(s), message(s), number(s), time, geometric art(s), nature scene(s), galaxy(ies), milky way, sky(ies), cloud(s), space nebula, stars, moon, water-wave(s), aurora light(s), animal(s), character(s), cartoon(s), sign(s), logo(s), wording(s) or commercial(s) to desired surfaces, including (1) indoor ceiling, walls, floors while the light-device have built-in prong, or (2) outdoor building, fence, walls, garden, patio area(s) and/or all other desired areas while light-device have AC-plug-wire to AC outlet to show the wider view angle lighted image and/or patterns. The said each of the said optics lens and image-forming-piece has its pre-determined geometric-shapes and/or texture, shaped opening, printing, art-design, wording, windows, cutout, variable thickness incorporate with motor/movement/spin/rotating/moving parts to make one or more inner and/or outer optics-lens and/or image-forming-piece and accessories to rotating to create said above wide viewing angle lighted image or lighted-patterns become motion/moving/variable/shaking, vibration, changing color or patterns with or without at least one of sensor, switch, RF or wireless control system.
F21S 8/00 - Lighting devices intended for fixed installation
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 5/04 - Refractors for light sources of lens shape
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 21/08 - Devices for easy attachment to a desired place
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 13/02 - Combinations of only two kinds of elements
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21K 9/65 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction specially adapted for changing the characteristics or the distribution of the light, e.g. by adjustment of parts
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
A microwave-sensor application for a light or electric device has a built-in microwave-sensor which can penetrate a wall, glass, building, garage door, or cement to detect over a 360 degree angle and predetermined vertical range. The microwave sensor can be used to activate a microwave-sensor application device or light device having an LED and/or laser for illumination or to provide an anti-theft alarm or warning.
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21S 8/00 - Lighting devices intended for fixed installation
F21V 5/04 - Refractors for light sources of lens shape
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21V 21/08 - Devices for easy attachment to a desired place
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 13/02 - Combinations of only two kinds of elements
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21L 4/00 - Electric lighting devices with self-contained electric batteries or cells
F21S 4/10 - Lighting devices or systems using a string or strip of light sources with light sources attached to loose electric cables, e.g. Christmas tree lights
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 9/03 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
F21V 17/00 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages
18.
LED light has built-in camera-assembly for colorful digital-data under dark environment
A LED Light device for house or stores or business application having built-in camera-assembly is powered by AC or-and DC power source for a lamp-holder, LED bulb, security light, flashlight, car torch light, garden, entrance door light or other indoor or outdoor LED light device connected to power source by (1) prongs or (2) male-base has conductive piece can be inserted into a female receiving-piece which connect with power source or (3) wired or AC-plug wires. The device has built-in camera-assembly has plurality functions to make different products and functions. The LED light device has at least one of (a) camera or DV (digital video) to take minimum MP4 or 4K, 8K image or photos, (b) digital data memory kits or cloud storage station, (c) wireless connection kits, Bluetooth or USB set for download function, (d) MCU or CPU or IC with circuit with desired motion sensor/moving detector(s)/other sensor, (e) camera-assembly for connecting Wi-Fi, Wi-Fi extend, or-and 3G/4G/5G internet or network or even settle-lite channel, (f) wireless-system to transmit or-and receiving wireless signal, (g) people had download APP or other platform incorporated with pre-programed or even AI (artificial intelligence) software to operate one or more of area-selections function to make screen or image comparison, detection, identification, recognition, tracing, purchase, or other pre-program following works including but not limited to detect moving object(s), face recognition or personal identification or-and habit or-and crime comparison, purchase, (h) LED light source to offer sufficient brightness under dark environment for camera-assembly take colorful or-and audio data, (i) other electric or mechanical parts & accessories, (j) has moving detector and software built-in to make comparison to judge the moving object(s) from the preferred screen selected-areas; to get desired function(s) for the said LED light device. The said camera-assembly has desired camera, wireless-system, sensor(s), part(s) and related module or circuit(s) or interface or-and backup power, and (k) camera-assembly may in separated housing incorporated with all kind of existing non-built-in camera light device so people can upgrade the non-camera device to has built-in camera and digital device for out-of-date non-camera all kind of light device including security light.
H04N 5/235 - Circuitry for compensating for variation in the brightness of the object
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
G03B 15/03 - Combinations of cameras with lighting apparatus; Flash units
G08B 13/196 - Actuation by interference with heat, light, or radiation of shorter wavelength; Actuation by intruding sources of heat, light, or radiation of shorter wavelength using passive radiation detection systems using image scanning and comparing systems using television cameras
The LED or-and Laser light string has more than one light performance functions has LED or-and Laser light bulb which has built-in LED or Laser or both to offer one or more LED or-and Laser light performance or functions select from (I) illumination, (2) projection, (3) party light, (4) lighted patterns, (5) light beams, (6) lighted image, (7) flood light, (8) color changing light (9) garden torch light, (10) garden landscape light string or other light string and all these functions has circuitry and controller built-in only light string or each of light-unit to make LED or-and laser light source(s) to turn on and turn-off or fade-in and fade-in or sequential or flashing or market available light performance which controller is one or more of the following parts including all parts & accessories selected from (i) sensor or photo sensor, motion sensor, (ii) detector or moving detectors, (iii) wireless or remote or IR or RF controller, (iv) switch, manual switch, automatically or timer switch (v) each light source or only light-string has built-in wireless receiver to match the wireless transmitter electric signals; those circuitry and controller is one of (a) built-in the light strings, or (b) built-in one master-control light-unit or each of light-unit, or (c) outside of the light string, or (d) outside the LED or-and laser light-unit housing, or (d) built-in power source, or (e) built-in the said light string or light-unit or LED or-and laser bulb circuity or controller.
F21S 4/10 - Lighting devices or systems using a string or strip of light sources with light sources attached to loose electric cables, e.g. Christmas tree lights
F21S 8/00 - Lighting devices intended for fixed installation
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 13/02 - Combinations of only two kinds of elements
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
F21S 10/02 - Lighting devices or systems producing a varying lighting effect changing colours
F21S 9/03 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
G03B 29/00 - Combinations of cameras, projectors or photographic printing apparatus with non-photographic non-optical apparatus, e.g. clocks or weapons; Cameras having the shape of other objects
F21V 21/29 - Pivoted arms adjustable in more than one plane employing universal joints
The LED plug-in outlet or DC power light has LED-unit(s) to offer one or more than one near-by lighted-location(s) with preferred adjustable angle constriction and each of said LED-unit(s) has built-in plurality of the said dip or chip or dice or COB LED(s) to emit directly or in-directly LED light-beam from big surface of the said each of LED-unit(s) to supply consumer for one LED light offer one or more than one near-by lighted locations for desired or selected-functions, light color(s), brightness(s), light performance(s) while incorporate with circuitry, AC-to-DC circuit, IC, and control device select from sensor, motion sensor, photo sensor, sound sensor, power fail circuit, switch, wireless controller with APP software to make setting or adjustment or selection to make the LED light to turn-on/off, fade-in and fade-out, high-low brightness, motion or non-motion selection, change functions from variety pre-programed functions to offer near-by locations which is less than 30 feet and brightness is less than 100 CD from each of the said LED unit(s).
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
H04N 9/31 - Projection devices for colour picture display
G03B 29/00 - Combinations of cameras, projectors or photographic printing apparatus with non-photographic non-optical apparatus, e.g. clocks or weapons; Cameras having the shape of other objects
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
A LED Light device having built-in camera-assembly is powered by AC or-and DC power source by (1) prongs or (2) AC Plug-wires or (3) another conductive-piece or (4) wired. The device has built-in camera-assembly has plurality function(s) for desired combination to make different products. The LED light device has at least one of (a) camera or DV to take minimum MP4 format image, (b) digital data memory kits or cloud storage station, (c) wireless kits, Bluetooth or USB set for download function, (d) motion/moving/other sensor, (e) assembly for contact Wi-Fi, 3G/4G/5G network or even settle-lite channel, (f) system to transmit or-and receiving wireless signal, (g) APP or other platform software to operation related device, (h) LED lighting, (i) movable sensor(s), camera, light-beam direction, or (j) other electric or mechanical parts & accessories to get desired function(s) for the said LED light device. The said motion/moving sensor unit has desired part or all of digital data related module or circuit(s) or backup power and unit may in separated housing with light-source assembly so people can upgrade the non-camera device to has built-in camera and digital device for their old non-camera security light. One of practical application is for angle adjustable LED light with prong to plug-into wall so can aim sensor, or-and camera, or-and LED light-beam to desired areas.
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 25/00 - Safety devices structurally associated with lighting devices
nd optics-lens as (i) project-cover or (ii) refractive-lens; those at least has refractive or-and protective function to make the tiny lighted image or patterns created by image-carrier or texture-lens to passing though refraction properties project-cover or refractive-lens or protective-lens to get the bigger size or colorful or steady or moving bigger size image or-and patterns with predetermined view angle and size to shown on (a) building, house, fence, wall for outdoor, or (b) ceiling, walls, floor for indoors application. The said moving image effect created by having at least one of the said 3 basic-parts project-assembly fit into or built-into or install to all kind of different light's housing construction of LED projection light for outdoor or-and indoor application(s) said LED light image or lighted patterns has moving, shaking, spin, rotating, vibration to get the desired moving or-and changing effect(s) and other unique features.
F21V 13/00 - Producing particular characteristics or distribution of the light emitted by means of a combination of elements specified in two or more of main groups
F21S 8/00 - Lighting devices intended for fixed installation
F21V 21/08 - Devices for easy attachment to a desired place
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 5/04 - Refractors for light sources of lens shape
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
G03B 21/00 - Projectors or projection-type viewers; Accessories therefor
The AC power source LED light device has moving image including LED light or LED Bulb has the moving project image by (1) LEDs on time difference period, or (2) magnetic field force to making moving, or (3) motor or movement to make move or changing of (A) the image-carrier which has preferred film/opening/printed piece/textures lens/treated lens/variable thickness lens/marked lens/sild/film/window with arts, or (B) project-lens, or (C) LED(s); to move or change position, or location. All big images or lighted patterns or lighted arts created from LED(s) emit light beam through image-carrier then through the project lens which at least has refractive function to make the lighted tiny image or patterns on image-carrier to passing though refraction properties project-len(s) to get the bigger size or colorful or steady or moving bigger size image or-and patterns for wider viewing angle to viewer on building, house, fence, wall outdoor or ceiling, walls, floor for indoors application. The said moving image effect created by make the said any combination of 3 basic of project-assembly fit into or built-into or install to all kind of different LED light housing for outdoor application said LED light image or lighted patterns has moving, shaking, spin, rotating, vibration to get the desired moving or-and changing effect(s).
F21S 8/00 - Lighting devices intended for fixed installation
F21K 9/23 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings
F21K 9/65 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction specially adapted for changing the characteristics or the distribution of the light, e.g. by adjustment of parts
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21Y 113/10 - Combination of light sources of different colours
An AC power source LED light device for projecting moving images includes an LED light or LED bulb arranged to provide moving effects by moving at least one LED, an image forming element, a projection lens, or a projection assembly, or by controlling on/off of multiple LEDs to provide the appearance of movement.
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
F21V 5/04 - Refractors for light sources of lens shape
F21V 13/02 - Combinations of only two kinds of elements
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 21/08 - Devices for easy attachment to a desired place
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
The multiple function LED project light is a hand-held and powered by DC power, and the project light has front lens has project magnify lens fit-into or install-on or built-in on center position. The project lens has below position outer-tube set assembled together so outer-tube can envelope or surrounded the lower position separated inner-tube which has image-forming unit within. While the project head move away from the project light neck by screw-thread or other extend construction to make distance between the magnify lens and image forming-unit changed to get focus adjustment functions. The said Project light may has self-prong, or project light fit within the hold-base which has prong-set both get AC current through the AC-to-DC circuit to get desired DC power for LED or SMD-LEDs or Dip-LEDs or COB-LED or other DC operated electric components to use. The said project light at least have project image function and flashlight functions or-and other more different functions light select from market available types.
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
G03B 21/53 - Means for automatic focusing, e.g. to compensate thermal effects
H04N 9/31 - Projection devices for colour picture display
G03B 29/00 - Combinations of cameras, projectors or photographic printing apparatus with non-photographic non-optical apparatus, e.g. clocks or weapons; Cameras having the shape of other objects
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 21/08 - Devices for easy attachment to a desired place
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
The (LED or-and Laser) light source for bulb or light device such as garden light that has at least one of or more than one optics-lens, and light device has one top cover having shape of flat or ½ ball, ⅔ ball, sphere, dome shape for top cover. Foe laser light source incorporate with flat top protective lens and laser film or grating film to enlarge or created plurality of image, lighted patterns. For LED light source can has project assembly which is a built-in or add-on or assembled inside of said light device. Further can incorporated flexible bendable arms to change position, direction, orientation of (LED or-and Laser) light beam. The said Light device also can offer near-by and far-away illumination, or-and lighted image, pattern projection with desired light effects by rotating optic-lens or LED(s). It also can get desired effects while LED(s) controlled by IC or circuitry making LED(s) for color changing or on-off on desired time, duration, cycles. The light device further can have more than one function selected from USB charger, power failure, RF remote control, Infra-red controller, blue-tooth, wifi, internet, App software, motion sensor and wireless with multiple-way communication. Also, light device may have rechargeable circuit, batteries or rechargeable battery, USB ports for the (LED or-and Laser)-bulb be charged or supply other device current.
F21V 5/04 - Refractors for light sources of lens shape
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
H04N 5/235 - Circuitry for compensating for variation in the brightness of the object
H04N 7/18 - Closed-circuit television [CCTV] systems, i.e. systems in which the video signal is not broadcast
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
H04N 5/232 - Devices for controlling television cameras, e.g. remote control
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
F21V 21/08 - Devices for easy attachment to a desired place
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21S 8/00 - Lighting devices intended for fixed installation
F21K 9/65 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction specially adapted for changing the characteristics or the distribution of the light, e.g. by adjustment of parts
F21S 2/00 - Systems of lighting devices, not provided for in main groups or , e.g. of modular construction
F21K 9/235 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings - Details of bases or caps, i.e. the parts that connect the light source to a fitting; Arrangement of components within bases or caps
F21V 19/00 - Fastening of light sources or lamp holders
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
A Light device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that or conductive wires can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a web cam having auto tracking added one of plurality functions to make different products and functions and retractable prongs that plug directly into a wall outlet or insert into existing lamp base or incorporate conductive wire to make electric connection at least one of built-in camera, storage unit, wireless kits, Bluetooth kits, motion sensor, light device.
F21S 2/00 - Systems of lighting devices, not provided for in main groups or , e.g. of modular construction
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 9/08 - Elements for modifying spectral properties, polarisation or intensity of the light emitted, e.g. filters for reducing intensity of light
28.
Multiple display-units LED light device has special light effects
The Multiple Display-units LED light device has special light effects which means the more than one of display-unit can be assembly into one viewing product install within the base by certain strength or assembly means which has the prong means or other unlimited power source mans to supply the electric signal to the said LEDs to make the eye-catching light effects. The display unit may have the build-in input-end or separated input-end to allow to match the said receptacle means of the base. The base with LED related circuit, prong means and other control means, IC means may disposed into the base or incorporated with sealed-unit to make the light beam to be seen by viewer though the viewing area for dedicated art, word, signal, data, design, motion liquid, 3 dimensional, geometric design, art, digital data, liquid crystal screen, LCD and colored image with color change LEDs for illumination.
G09G 3/30 - Control arrangements or circuits, of interest only in connection with visual indicators other than cathode-ray tubes for presentation of an assembly of a number of characters, e.g. a page, by composing the assembly by combination of individual elements arranged in a matrix using controlled light sources using electroluminescent panels
H05B 33/08 - Circuit arrangements for operating electroluminescent light sources
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21S 10/02 - Lighting devices or systems producing a varying lighting effect changing colours
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
G09F 23/04 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes the advertising matter being displayed by the operation of the article illuminated
The (LED or-and Laser) light source or bulb for light device including garden light has at least one of (1) more than one bulb-base(es) (2) more than one optics-elements which at least one is 180 of degree flat or ½ ball, ⅔ ball, sphere, dome shape for top cover (3) optic-lens or laser film or grating film to enlarge or created plurality of image, lighted patterns (4) built-in or add-on flexible bendable arms to change position, direction, orientation of (LED or-and Laser) light beam (5) near-by and far-away illumination, image, lighted patterns, or desired light effects (6) more than one light beam emit out from (LED or-and Laser) light source or bulb for garden light controlled by IC or circuitry (7) more than one function selected from USB charger, power failure, remote control, Infra-red controller, blue-tooth, wifi, internet, App software, motion sensor and wireless with multiple-way communication (8) rechargeable circuit, batteries or rechargeable battery, USB ports for the (LED or-and Laser)-bulb be charged or supply other device current.
F21K 9/65 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction specially adapted for changing the characteristics or the distribution of the light, e.g. by adjustment of parts
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21V 5/04 - Refractors for light sources of lens shape
F21V 29/70 - Cooling arrangements characterised by passive heat-dissipating elements, e.g. heat-sinks
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21W 131/30 - Lighting for domestic or personal use
The current invention (1) has more than one bulb-base, or (2) has more than one optics-elements and at least one is optics-lens for 180 of degree flat or ½ ball, ⅔ ball, sphere, dome shape top cover of the said LED or-and Laser light-device or Bulb which has refractive or-and reflective or other optics properties to enlarge the image or lighted patterns to wider range or big area, or (3) has built-in or add-on flexible bendable arms or string-wire or conductive-wire to can change position, or direction or orientation of LED or-and Laser light beam by variety choices of moveable parts, or (4) can offer near-by and far-away illumination, image, lighted patterns, projection light, or any combination with all market available light effects or digital data display images, or (5) has more than one light beam emit out from LED or-and Laser light-device or bulb which under controller or IC or circuitry, or (6) has more than one functions to emit light beam which may be selected from power failure, remote control, Infra-red controller, blue-tooth, wifi Wi-Fi, internet, App software, motion sensor and wireless with multiple-way communication to trigger at least one of the light beam to offer illumination or-and project image or-and lighted patterns effects.
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21S 8/00 - Lighting devices intended for fixed installation
F21S 10/02 - Lighting devices or systems producing a varying lighting effect changing colours
F21V 5/04 - Refractors for light sources of lens shape
F21V 11/08 - Screens not covered by groups , , or using diaphragms containing one or more apertures
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21K 9/65 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction specially adapted for changing the characteristics or the distribution of the light, e.g. by adjustment of parts
A LED Light device having built-in camera unit is powered by AC or-and DC power source for a lamp-holder, LED bulb, flashlight, garden, entrance door light or other LED light device connected to power source by (1) prongs or (2) male-base has conductive wires can be inserted into a female-socket which connect with power source or (3) wired. The device has built-in camera unit has plurality functions to make different products and functions. The LED light device has at least one of (a) camera or DV to take minimum MP4 format image, (b) digital data memory kits or cloud storage station, (c) wireless kits, Bluetooth or USB set for download function, (d) motion/moving/other sensor, (e) assembly for contact Wifi, 3G/4G/5G network or even settle-lite channel, (f) system to transmit or-and receiving wireless signal, (g) APP or other platform software to operation related device, (h) LED lighting, (h) other electric or mechanical parts & accessories to get desired function(s) for the said LED light device. The said motion/moving sensor unit has desired part or all of digital data related module or circuit(s) or backup power and unit may in separated housing with light source assembly so people can upgrade the non-camera device to has built-in camera and digital device for their old non-camera security light.
H04N 5/232 - Devices for controlling television cameras, e.g. remote control
H04N 5/77 - Interface circuits between an apparatus for recording and another apparatus between a recording apparatus and a television camera
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 8/00 - Lighting devices intended for fixed installation
F21V 21/08 - Devices for easy attachment to a desired place
The LED light has Track to install LED-units anywhere along the length. The LED-unit has pair of resilient or pop-out & fall-down movable contactor so can fit-within or add-on LED-units to track and connect with metal bus-strip(s) which has electric current or-and magnetic force to adhesive the pop-out & fall-down contactor on back of the LED-unit. LED light device including LED light source, or mini size LED fluorescent tube, or mini LED light bar, or mini LED Bulb, or mini LED lamp, mini LED Lamp as light source has housing to fit-in or add-on or magnetic adhesive on track to form a finish light device and get power from built-in or outside AC-to-DC transformer, circuit, power source and can control by switch, remote controller, motion/moving detector(s) sensor, all kind of sensor, APP software while incorporate with Wifi or wireless network to make the on-off, color changing, color mix, dimmer adjustment, moving light, all other light show for LED track light has fit-in LED-units by resilient contractors or LED track light has add-on LED-units by pop-out & fall-down movable contactor built on back of LED-unit and adhesive by magnetic force bus-strips.
F21S 8/00 - Lighting devices intended for fixed installation
F21K 9/275 - Retrofit light sources for lighting devices with two fittings for each light source, e.g. for substitution of fluorescent tubes - Details of bases or housings, i.e. the parts between the light-generating element and the end caps; Arrangement of components within bases or housings
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 17/10 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages characterised by specific fastening means or way of fastening
F21V 17/16 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages characterised by specific fastening means or way of fastening by deformation of parts of the lighting device; Snap action mounting
F21V 21/08 - Devices for easy attachment to a desired place
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21V 21/005 - Supporting, suspending, or attaching arrangements for lighting devices; Hand grips for several lighting devices in an end-to-end arrangement, i.e. light tracks
A Light device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that or conductive wires can be inserted into a socket that would otherwise receiving a bulb or light source. The device may take the form of a webcam having auto tracking added one of plurality functions to make different products and functions and retractable prongs that plug directly into a wall outlet or insert into existing lamp base or incorporate conductive wire to make electric connection at least one of built-in camera, storage unit, wireless kits, Bluetooth kits, motion sensor, light device. The said motion sensor and digital data related device(s) may in separated housing with light source assembly so people can upgrade the non-camera device to has built-in camera and digital device for their old non-camera security light.
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
The current invention make a big improvement than conventional market available all kind of LED bulb which only can offer near-by areas illumination not like the current invention can use one LED bulb to offer near-by and far-away illumination or image or both or any combination with other light effects and digital data display images. Also, The current invention may has more than one light beam emit out from LED bulb which under more than one control means for the one of the light beam may selected from power failure, remote control, Infra red controller, blue-tooth with mobile phone, motion sensor to trigger at least one of the light beam to offer the light beam for illumination or image to area(s).
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 8/00 - Lighting devices intended for fixed installation
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 5/04 - Refractors for light sources of lens shape
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21K 9/65 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction specially adapted for changing the characteristics or the distribution of the light, e.g. by adjustment of parts
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21V 29/502 - Cooling arrangements characterised by the adaptation for cooling of specific components
nd or more circuit-inside to get enough current for other function besides USB Charging-ports which need big Amperange for Plurality of LEDs for different color, Other light source, IP Cam and related IR photo diode, wireless communication, APP, Remote contontroller, motion sensor, Dimmer, PIR sensor, Motion sensors.
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21S 8/00 - Lighting devices intended for fixed installation
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H02J 4/00 - Circuit arrangements for mains or distribution networks not specified as ac or dc
G06F 1/26 - Power supply means, e.g. regulation thereof
F21S 6/00 - Lighting devices intended to be free-standing
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
LED and/or laser light device has more than one optic elements and wide flat opening or sphere outer cover to create big range image or lighted pattern
An LED and/or laser light device uses an outlet plug-in power source, bulb base power source, interchangeable power source, or USB power source, and incorporates more than one geometrically shaped optics elements or lens having reflective and/or refractive properties that cause a plurality of light beams to reflect, retro-reflect or refract before passing through the at least one optics lens to create or project an image, message, lighted pattern, number, time, geometric art, nature scene, etc. onto a desired surface with a wider viewing angle.
F21Y 113/10 - Combination of light sources of different colours
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
37.
Device having built-in digital data device powered by unlimited power source for light device
A device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a webcam having auto tracking functions and retractable prongs that plug directly into a wall outlet.
H04N 7/18 - Closed-circuit television [CCTV] systems, i.e. systems in which the video signal is not broadcast
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21V 21/08 - Devices for easy attachment to a desired place
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
H04N 5/232 - Devices for controlling television cameras, e.g. remote control
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
H04N 5/235 - Circuitry for compensating for variation in the brightness of the object
F21K 9/235 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings - Details of bases or caps, i.e. the parts that connect the light source to a fitting; Arrangement of components within bases or caps
F21V 19/00 - Fastening of light sources or lamp holders
An AC or DC powered LED or-and laser projection light may have more than one function, which may include conventional all-purpose light device has built-in or add projection functions using existing light device's its-own light housing with project-kits or project-assembly has built-in light sources to project a light beam, image, or digital-data from display-unit. The said project light is a desk top light, floor light, garden light, emergency light, night light, motion sensor light, power fail light, seasonal light, Christmas light and/or ornament, licensee products, cartoon character related products, blue tooth light, moving and or multi-function light; with rechargeable or non-rechargeable energy storage kits having preferred circuit, switch, sensor, timer, IC electric parts, and accessories. The said LED and display-unit is within non-leakage light-beam assembly and project-lens is install on (1) opening of LED light highest housing-body or (2) above the inner non-leakage light-beam assembly which formed by desired combination of tube, tray, holder, housing-parts has wall to surround the LED and display-unit.
G03B 29/00 - Combinations of cameras, projectors or photographic printing apparatus with non-photographic non-optical apparatus, e.g. clocks or weapons; Cameras having the shape of other objects
F21S 8/00 - Lighting devices intended for fixed installation
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21V 21/08 - Devices for easy attachment to a desired place
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
H04N 9/31 - Projection devices for colour picture display
An LED light device includes an LED night light or LED bulb having a moving projection image. The movement effect is obtained by (1) causing LEDs to illuminate with a time difference, (2) using a magnetic field force to cause a film, opening, printed piece, or slide to move, shake, spin, rotate, or vibrate, or (3) using a motor or movement to cause the film/opening/printed piece/slide or a projection-lens to move, shake, spin, rotate, or vibrate. Light beams from an LED light source pass through the film/opening/printed piece/slide and then through a projection lens that causes a tiny lighted image to become a bigger or more colorful moving projected image having a wider viewing angle.
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21V 5/04 - Refractors for light sources of lens shape
F21S 8/00 - Lighting devices intended for fixed installation
F21S 10/02 - Lighting devices or systems producing a varying lighting effect changing colours
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21K 9/65 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction specially adapted for changing the characteristics or the distribution of the light, e.g. by adjustment of parts
F21V 11/08 - Screens not covered by groups , , or using diaphragms containing one or more apertures
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21W 131/30 - Lighting for domestic or personal use
F21Y 113/10 - Combination of light sources of different colours
An LED light has a built-in projection light and a night light to offer at least two functions for people in a dark environment. The projection light can project an image from any type of display-unit irrespective of geometric shape or image source or type, including display of digital data, wireless digital data, an LCD or TFT screen display, or any other display, enabling images of enlarged size to be projected onto a preferred surface, making it easier for people to see the image. The built-in night light helps people see things in a dark environment.
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 21/08 - Devices for easy attachment to a desired place
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
F21V 21/29 - Pivoted arms adjustable in more than one plane employing universal joints
Desk top item has USB-units or USB-module has USB-charging ports to charge energy-storage unit or assembly inside of the other electric or digital data device(s)
Desk top items has LED include USB-unit(s) or USB-module(s) has 2007 released specification of quickly USB Charging-port(s) has minimum 1.0 Amp to 5 Amp charging capacity to quickly charge DC current into energy-storage unit or assembly inside the other electric or digital device(s) and, optionally, additional outlet-units, to supply AC current to other electric or digital devices including smart phone, computer, communication, consumer electric products. The USB-unit(s) or USB-Module(s) or Outlet-unit(s) fit within or install on anywhere of the item's housing including anywhere of the base, pole, bar, stand, step, contour, edge, walls. The said USB charger only has charging function no any data transmit and only have one input power source not more than one and charging capacity minimum 1.0 Amp up for quickly charge from USB-Charging-ports by 2 male USB-plugs' USB-wire to the device's female USB-ports.
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21S 8/00 - Lighting devices intended for fixed installation
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H02J 4/00 - Circuit arrangements for mains or distribution networks not specified as ac or dc
G06F 1/26 - Power supply means, e.g. regulation thereof
F21S 6/00 - Lighting devices intended to be free-standing
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
A Light device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that or conductive wires can be inserted into a socket that would otherwise receiving a bulb or light source. The device may take the form of a webcam having auto tracking added one of plurality functions to make different products and functions and retractable prongs that plug directly into a wall outlet or insert into existing lamp base or incorporate conductive wire to make electric connection at least one of built-in camera, storage unit, wireless kits, Bluetooth kits, motion sensor, light device. The said motion sensor and digital data related device(s) may in separated housing with light source assembly so people can upgrade the non-camera device to has built-in camera and digital device for their old non-camera security light.
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 21/08 - Devices for easy attachment to a desired place
The LED desk light has more than one function which has area illumination by LED light source and incorporate with at least one but not limited other functions select from charge other electric device(s) from built-in USB port(s) or USB-unit(s) or USB-module(s), a display of light beams from the LED, projection of an image, projection of a time image, clock functions, illumination of an area, playing of music, serving as a source of alternating current (AC) power or electric signals, display of photos, wire or wireless transmission of digital signals, providing air flow at a desired temperature, generating moisture, steam, or smells, dispensing liquid, brewing coffee/tea, preparing food, and displaying charging status, night light with desired LED light variety light performance, functions, effects including but not limited for changing color, brightness, dimmer, moving effects, chasing which available from market place by IC or circuit design and powered by Outside Transformer DC power source or Inside Transformer with input AC power source though desire DC-to-DC or AC-to-DC circuits.
nd transformer to supply big Amperage and different working voltage to prevent from 1 transformer not only supply USB Charging-ports(s) but also Big Power consumption for LEDs or other light source or other functions need power.
H02J 7/02 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries for charging batteries from ac mains by converters
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
An LED projection night light for night time or dark area use includes a plug-in wall outlet night light or direct current operated night light with projection features to project an image, message, data, logo, or time on a ceiling, walls, floor, or other desired surface. The LED night light incorporates optics-lens and Object with preferred focus calculation to create bigger image to shown on locations. The parts for make night light including but not limited as an optics-lens, slides, openings, or cut-outs, and/or a transparent material piece, translucent material piece, telescope assembly, housing-member, slide-film, slide-disc, elastic-member, tilt-means, rotating-means, adjust-means, roller-means, mechanical-means, extend-means, convex lens, and/or concave lens designed to make the desired image, message, data, logo, or time project to the ceiling, walls, floor, or other desired surface to be seen by a viewer. The LED light upgrade model has an interchangeable power source arrangement, permitting the night light to be selectively powered by either an AC powered sealed-unit or a DC powered battery-pack.
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 5/04 - Refractors for light sources of lens shape
F21V 13/02 - Combinations of only two kinds of elements
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
An LED night light for night time or dark area use, such as a plug-in wall outlet night light or direct current (DC) operated night light, includes projection or image features to project or present an image, message, data, logo, or time on a ceiling, walls, floor, or other desired surface, or an optics element surface. The optics means may include an magnify optics-lens, Tube or tube assembly, slide, convex lens, concave lens, openings, cut-outs, film, grating, or holographic element to create an image at a desired location. The night light upgrade model has an adjustable angle, adjustable orientation, of said bigger image position and change image by moving the said night. The said up grade model can adjustable Light function(s) or distance between light source and magnetic optics-means and slide, as well as other adjustable position, location, or orientation features.
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 21/08 - Devices for easy attachment to a desired place
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 5/04 - Refractors for light sources of lens shape
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21V 13/02 - Combinations of only two kinds of elements
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
nd or more circuit-inside to offer the Big power to plurality of LEDs if had different color and other electric controller, IP cam and its IR photo diode, motion sensor, remote controller, PIR sensor or other electric controller available at market place.
A light device includes a USB charger, an AC to DC converter, and a DC to DC circuit to provide power to a light source that provides area illumination, at least one USB charging port and optional additional functions.
F21S 6/00 - Lighting devices intended to be free-standing
F21S 9/03 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator rechargeable by exposure to light
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
H05B 35/00 - Electric light sources using a combination of different types of light generation
H05B 37/00 - Circuit arrangements for electric light sources in general
A Light device having built-in Camera to operate desire digital data functions is powered by an power source for a lamp-holder, light source, flashlight or light device connected to power source by prongs or a bulb-base with conductive contacts to get power. The device may take the form of an IP cam, or Driving Cam, or webcam having but not limited add for auto tracking or one of plurality functions to make different products and functions with optional retractable prongs that plug directly into a wall outlet or insert into existing lamp base or incorporate conductive wire to make electric connection at least one of built-in camera, storage unit, wireless kits, Bluetooth kits, APP communication unit, motion sensor, light device. The said motion sensor and digital data related device(s) including but not limited all kind of camera may in separated housing with night-vision assembly selected from light source, IR diodes, low light camera lens & IC & circuits so people can upgrade the non-camera device to has built-in camera and digital device for their old non-camera security light. The motion sensor head or PIR has digital data output to work with wireless communication parts to avoid the analog model for mutual interfere the signals to cause false functions of light source or wifi or APP or wireless related functions.
G08B 13/196 - Actuation by interference with heat, light, or radiation of shorter wavelength; Actuation by intruding sources of heat, light, or radiation of shorter wavelength using passive radiation detection systems using image scanning and comparing systems using television cameras
st AC directly though conductive parts to outlet-ports to supply AC to other device. Furthermore, the light device Optional can add other function(s) select from (a) Time piece related (b) Reflect Image (c) Power station (d) project image (e) heater (f) Air Flow (g) wireless communication (h) remote controller (g) APP controller (h) Blue-tooth controller.
The Multiple Display-units LED light device has special light effects which means the more than one of display-unit can be assembly into one viewing product install within the base by certain strength or assembly means which has the prong means or other unlimited power source mans to supply the electric signal to the said LEDs to make the eye-catching light effects. The display unit may have the build-in input-end or separated input-end to allow to match the said receptacle means of the base. The base with LED related circuit, prong means and other control means, IC means may disposed into the base or incorporated with sealed-unit to make the light beam to be seen by viewer though the viewing area for dedicated art, word, signal, data, design, motion liquid, 3 dimensional, geometric design, art, digital data, liquid crystal screen, LCD and colored image with color change LEDs for illumination.
G09G 3/30 - Control arrangements or circuits, of interest only in connection with visual indicators other than cathode-ray tubes for presentation of an assembly of a number of characters, e.g. a page, by composing the assembly by combination of individual elements arranged in a matrix using controlled light sources using electroluminescent panels
H05B 33/08 - Circuit arrangements for operating electroluminescent light sources
F21S 8/00 - Lighting devices intended for fixed installation
G09F 23/04 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes the advertising matter being displayed by the operation of the article illuminated
F21S 10/02 - Lighting devices or systems producing a varying lighting effect changing colours
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
A multiple function LED night light has at least one LED device and added function(s) such as an air-freshener adaptor device, sonic device, frequency device, sensor device, bug repeller device, second light device, timepiece, electric message device, timer device, temperature device, surge protection device, electric short circuit protection device, base device for installation on an existing lamp socket, emergency light device, or any other electric device(s) suitable for home use to keep people comfortable or safe. The LED device has a first optic means to change the narrow-viewing angle of an LED's spot-light beams into a wider-viewing angle and second optic means to help make the LED night light exhibit a smooth lighting effect. The device may be arranged to fit into an existing night light bulb socket to turn any existing bulb night light into a power saving LED night light.
F21S 8/00 - Lighting devices intended for fixed installation
H01R 33/92 - Holders formed as intermediate parts for distributing energy in parallel through two or more counterparts at least one of which is attached to apparatus to be held
F21V 5/04 - Refractors for light sources of lens shape
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
A multiple function LED night light has at least one LED device and added function(s) such as an air-freshener adaptor device, sonic device, frequency device, sensor device, bug repeller device, second light device, timepiece, electric message device, timer device, temperature device, surge protection device, electric short circuit protection device, base device for installation on an existing lamp socket, emergency light device, or any other electric device(s) suitable for home use to keep people comfortable or safe. The LED device has a first optic means to change the narrow-viewing angle of an LED's spot-light beams into a wider-viewing angle and second optic means to help make the LED night light exhibit a smooth lighting effect. The device may be arranged to fit into an existing night light bulb socket to turn any existing bulb night light into a power saving LED night light.
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 5/04 - Refractors for light sources of lens shape
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21Y 113/13 - Combination of light sources of different colours comprising an assembly of point-like light sources
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
H01R 33/92 - Holders formed as intermediate parts for distributing energy in parallel through two or more counterparts at least one of which is attached to apparatus to be held
A multiple function LED night light has at least one LED device and added function(s) such as an air-freshener adaptor device, sonic device, frequency device, sensor device, bug repeller device, second light device, timepiece, electric message device, timer device, temperature device, surge protection device, electric short circuit protection device, base device for installation on an existing lamp socket, emergency light device, or any other electric device(s) suitable for home use to keep people comfortable or safe. The LED device has a first optic means to change the narrow-viewing angle of an LED's spot-light beams into a wider-viewing angle and second optic means to help make the LED night light exhibit a smooth lighting effect. The device may be arranged to fit into an existing night light bulb socket to turn any existing bulb night light into a power saving LED night light.
F21S 8/00 - Lighting devices intended for fixed installation
H01R 33/92 - Holders formed as intermediate parts for distributing energy in parallel through two or more counterparts at least one of which is attached to apparatus to be held
F21V 5/04 - Refractors for light sources of lens shape
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
An LED light has surrounding lighted geometric art patterns shown on the LED light location's wall. The said LED light power by (1)AC or (2)DC power source though circuit and related electric parts & accessories to make built-in LED(s) to turn on and turn off for predetermined light effects including color changing, fade-in & fade-out and other moving LED(s) effects while LED are install within the main housing on different locations or height or multiple height to emit the light to all directions in order to cover certain range of the said housing and incorporate with decorative piece or slide, printed film or character slide, holes, shaped cutouts, windows with design to form the lighted geometric art pattern surround the said LED light.
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
A41G 1/00 - Artificial flowers, fruit, leaves, or trees; Garlands
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
A multiple function wall cover plate has a built-in USB charger and light connected by prongs to an existing wall outlet's inner receptacle to supply AC power source to the multiple function wall cover's circuit(s) and drive each circuit to carry out predetermined functions. The wall outlet may also have functions in addition to the USB charging and light functions. A movable piece may be provided to adapt the wall outlet to inner receptacles having oval-shaped and rectangular-shaped outlets.
H01R 27/02 - Coupling parts adapted for co-operation with two or more dissimilar counterparts for simultaneous co-operation with two or more counterparts
H01R 13/66 - Structural association with built-in electrical component
H01R 13/70 - Structural association with built-in electrical component with built-in switch
H01R 13/717 - Structural association with built-in electrical component with built-in light source
H01R 13/73 - Means for mounting coupling parts to apparatus or structures, e.g. to a wall
57.
Light device has built-in digital data system for record image, sound
A Light device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that or conductive wires can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a webcam having auto tracking added one of plurality functions to make different products and functions and retractable prongs that plug directly into a wall outlet or insert into existing lamp base or incorporate conductive wire to make electric connection at least one of built-in camera, storage unit, wireless kits, Bluetooth kits, motion sensor, light device.
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 21/08 - Devices for easy attachment to a desired place
An LED light device that projects a kaleidoscopic image includes multiple reflective or retro-reflective elements for generating multiple images of at least one object, a projection device for projecting the multiple images, and a changing mechanism or circuit for moving the at least one object or changing a pattern of turned-on LEDs that illuminate the object.
An LED and/or laser light device for having a plug-in power source, an interchangeable power source, or a USB power source incorporates more than one optical element having more than one reflective or refractive surfaces at different positions, distances, and/or orientations relative to the LEDs and/or laser-light source of the LED or laser light to cause light beams to reflect or refract before passing through the optical elements and create or project an image, message, time, geometric art, nature scene, galaxy, milky way, sky, cloud, start, moon, water-wave, aurora light, animal, characters, cartoon, sign, logo, commercial to at least one surface surrounding the light device. The optical elements may have a predetermined texture and/or shaped openings, windows, cutouts, or variable thicknesses and further may incorporate parts and accessories such as a motor to provide moving image effects with a wide viewing angle and variable colors or patterns.
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 10/06 - Lighting devices or systems producing a varying lighting effect flashing, e.g. with rotating reflector or light source
F21K 9/60 - Optical arrangements integrated in the light source, e.g. for improving the colour rendering index or the light extraction
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21Y 113/10 - Combination of light sources of different colours
An LED light device has at least one electric coil and at least one corresponding magnetic element built-in on a movable pendant to cause at least one part to have a moving, waving, or shaking function. The pendant can be arranged to move a lens and project a moving, waving, shaking, or vibrating LED light image on a non-moving surface or to cause moving, waving, or shaking of one or more parts of the body of the device.
Desk top items with LEDs or another light source also include at least one USB-unit or USB-module and, optionally, additional outlet-units, to supply power to other electric or digital devices such as a smart phone or digital data device. The USB-unit(s), USB-module(s) or outlet-unit(s) fit within or are installed anywhere on the desk top item's housing, including anywhere on a base, pole, bar, stand, step, contour, edge, or wall of the housing.
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21S 8/00 - Lighting devices intended for fixed installation
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H02J 4/00 - Circuit arrangements for mains or distribution networks not specified as ac or dc
G06F 1/26 - Power supply means, e.g. regulation thereof
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 15/01 - Housings, e.g. material or assembling of housing parts
Desk top items with LEDs also include USB-unit(s) or USB-module(s) and, optionally, additional outlet-units, to supply charging power to other electric or digital devices such as a smart phone or digital data device. The USB-unit(s) or USB-module(s) are arranged to supply power only, and do not have an additional USB data transfer function.
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 15/01 - Housings, e.g. material or assembling of housing parts
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
F21S 8/00 - Lighting devices intended for fixed installation
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
An LED light with kaleidoscope effects includes an LED light source in the form of a matrix that can be electronically controlled to provide different images. Since image changing is carried out by turning on and off LEDs in the LED matrix, there is also no need for the changing or adjustment means to move the display unit(s) or inner medium (if any). Instead, the changing means only needs to change the LEDs color, brightness, and/or turn-on and turn-off timing or sequence.
An LED projection night light for night time or dark area use includes a plug-in wall outlet night light or direct current operated night light with projection features to project an image, message, data, logo, or time on a ceiling, walls, floor, or other desired surface. The LED night light incorporates optics means such as an optics-lens, slides, openings, or cut-outs, and/or a transparent material piece, translucent material piece, telescope assembly, housing-member, slide-film, slide-disc, elastic-member, tilt-means, rotating-means, adjust-means, roller-means, mechanical-means, extend-means, convex lens, and/or concave lens designed to make the desired image, message, data, logo, or time project to the ceiling, walls, floor, or other desired surface to be seen by a viewer. The LED light has an interchangeable power source arrangement, permitting the night light to be selectively powered by either an AC powered sealed-unit or a DC powered battery-pack.
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 21/08 - Devices for easy attachment to a desired place
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
An LED bulb has more than one movable level that can change position to avoid blocking or interference with heat dissipation, light emission or projection, or control signal transmission. The LED bulb offers nearby and far away illumination or any combination of other light effects, image projection, or digital data image display, and may function in response to a power failure remote control or control by an infrared controller, Bluetooth controller, WiFi, Internet, or app software control, or a motion sensor.
An LED night light having different power sources including a battery, outlet plug-in power source, or interchangeable power source incorporates geometric shape optics means having more than one reflective means situated at different positions, distances, and/or orientations so that light beams will be reflected multiple times by more than one reflector means before passing through the reflectors' optics means and being projected to an external surface(s) such as a ceiling, wall, or floor.
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
Desk top items with LEDs also include USB-unit(s) or USB-module(s) and, optionally, additional outlet-units, to supply charging power to other electric or digital devices such as a smart phone or digital data device. The USB-unit(s) or USB-module(s) are arranged to supply power only, and do not have an additional USB data transfer function.
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
F21S 8/00 - Lighting devices intended for fixed installation
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H02J 4/00 - Circuit arrangements for mains or distribution networks not specified as ac or dc
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
G06F 1/26 - Power supply means, e.g. regulation thereof
F21S 6/00 - Lighting devices intended to be free-standing
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
An LED and/or laser light device having a plug-in AC power source, an interchangeable power source, or a USB power source incorporates more than one optical-lens which having more than one reflective or refractive area or sections or surfaces, and at different positions, distances, and/or orientations relative to the LEDs and/or laser light source of the LED or laser light to cause light beams to reflect and/or refract before passing through the top optical-lens and create or project an image, message, time, geometric art, nature scene, galaxy, milky way, sky, cloud, starts, moon, water-wave, aurora light, animal, characters, cartoon, sign, logo, commercial to at least one surface surrounding and/or away-from the light device. The optical-lens may have a predetermined texture and/or shaped openings, windows, cutouts, or variable thicknesses and further may incorporate parts and accessories such as a motor to provide moving image effects with a wide viewing angle and variable colors or patterns.
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
An LED and/or laser light device having a plug-in AC power source, an interchangeable power source, or a USB power source incorporates more than one optical-lens which having more than one reflective or refractive area or sections or surfaces, and at different positions, distances, and/or orientations relative to the LEDs and/or laser light source of the LED or laser light to cause light beams to reflect or-and refract before passing through the top optical-lens and create or project an image, message, time, geometric art, nature scene, galaxy, milky way, sky, cloud, starts, moon, water-wave, aurora light, animal, characters, cartoon, sign, logo, commercial to at least one surface surrounding or-and away-from the light device. The optical-lens may have a predetermined texture and/or shaped openings, windows, cutouts, or variable thicknesses and further may incorporate parts and accessories such as a motor to provide moving image effects with a wide viewing angle and variable colors or patterns.
The Multiple Display-units LED light device has special light effects which means the more than one of display-unit can be assembly into one viewing product install within the base by certain strength or assembly means which has the prong means or other unlimited power source mans to supply the electric signal to the said LEDs to make the eye-catching light effects. The display unit may have the build-in input-end or separated input-end to allow to match the said receptacle means of the base. The base with LED related circuit, prong means and other control means, IC means may disposed into the base or incorporated with sealed-unit to make the light beam to be seen by viewer though the viewing area for dedicated art, word, signal, data, design, motion liquid, 3 dimensional, geometric design, art, digital data, liquid crystal screen, LCD and colored image with color change LEDs for illumination.
G09G 3/30 - Control arrangements or circuits, of interest only in connection with visual indicators other than cathode-ray tubes for presentation of an assembly of a number of characters, e.g. a page, by composing the assembly by combination of individual elements arranged in a matrix using controlled light sources using electroluminescent panels
H05B 33/08 - Circuit arrangements for operating electroluminescent light sources
71.
Multiple functions wall cover plate has built-in USB and light means
The multiple functions wall cover plate has built-in USB and light means connect by prong means to existing wall inner-kit's receptacle to get AC power source to multiple function wall cover's circuit(s) to drive each circuit for predetermined functions. The said cover plate fasten by screw, prong or false prong to hold on inner-kit's holder and overlay at least one of the inner receptacle to offer people safety and quickly USB charger with desire light illumination and add extra functions.
The current invention make a big improvement than conventional market available all kind of LED bulb which only can offer near-by areas illumination not like the current invention can use one LED bulb to offer near-by and far-away illumination or image or both or any combination with other light effects and digital data display images. Also, The current invention may has more than one light beam emit out from LED bulb which under more than one control means for the one of the light beam may selected from power failure, remote control, Infra red controller, blue-tooth with mobile phone, motion sensor to trigger at least one of the light beam to offer the light beam for illumination or image to area(s).
USB Charger related products have a built-in liquid display unit including decorative, reflective, and/or miniature items within a medium and an optional heater-means to cause movement of medium and the items included within the medium. The charger related products are supplied with power from an AC power wire, the 110 VAC to 250 VAC input power being converted into an output charging current having a range of 1.0 A to 12 A and 3.5 VDC to 8.5 VDC. In addition, USB digital signal or data ports may be connected with an external computer, consumer electric device, or communication device, and the USB charger related products may further include additional devices such as an AC outlets(s), sensor, motion sensor, remote control, timer, LEDs, power fail circuitry, audio, video, or smell devices, or other electric or electronic devices to provide one or more additional functions in addition to the charging function.
B44C 5/00 - Processes for producing special ornamental bodies
G09F 23/02 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes the advertising matter being displayed by the operation of the article
G09F 23/04 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes the advertising matter being displayed by the operation of the article illuminated
G09F 23/06 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes the advertising matter being combined with articles for restaurants, shops, or offices
A01K 63/00 - Receptacles for live fish, e.g. aquaria; Terraria
A01K 63/06 - Arrangements for heating or lighting in, or attached to, receptacles for live fish
F21S 8/00 - Lighting devices intended for fixed installation
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
74.
Device having built-in digital data device powered by unlimited power source for light device
A device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a webcam having auto tracking functions and retractable prongs that plug directly into a wall outlet.
H04N 7/18 - Closed-circuit television [CCTV] systems, i.e. systems in which the video signal is not broadcast
F21S 4/00 - Lighting devices or systems using a string or strip of light sources
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21V 21/08 - Devices for easy attachment to a desired place
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
A desktop USB-charger related product has space to receive an AC power-wire, USB-charger wire, or another charging related wire(s). The USB-charger related product is arranged to be installed on a desk top at a hand-reachable distance from a user by attachment means so that there is no need for the user to bend body or knee in order to charge a device using the charger. The USB-charger related product has at least one USB-port that can supply a desired output-current in the range of from 1.0 A to 12 A and 3.5VDC to 8.5VDC by converting input AC power ranging from 110VAC to 250VAC. The USB-charger product may also incorporate at least one additional device such as an AC outlets, sensor, motion sensor, remote control, time display, LEDs, other lights, a power fail device, a smell device, an audio device, a video device, or other electric or electronic devices.
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H02G 11/02 - Arrangements of electric cables or lines between relatively-movable parts using take-up reel or drum
H01R 13/72 - Means for accommodating flexible lead within the holder
H02G 3/18 - Distribution boxes; Connection or junction boxes providing line outlets
76.
Device having built-in digital data device powered by unlimited power source for light device
A device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a webcam having auto tracking functions and retractable prongs that plug directly into a wall outlet.
H04N 7/18 - Closed-circuit television [CCTV] systems, i.e. systems in which the video signal is not broadcast
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 14/02 - Controlling the distribution of the light emitted by adjustment of elements by movement of light sources
F21V 21/08 - Devices for easy attachment to a desired place
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
G01S 3/786 - Systems for determining direction or deviation from predetermined direction using adjustment of orientation of directivity characteristics of a detector or detector system to give a desired condition of signal derived from that detector or detector system the desired condition being maintained automatically
Desk top items with LEDs also include USB-unit(s) or USB-module(s) and, optionally, additional outlet-units, to supply power to other electric or digital devices such as a smart phone or digital data device.
H02J 7/00 - Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 15/01 - Housings, e.g. material or assembling of housing parts
H02J 4/00 - Circuit arrangements for mains or distribution networks not specified as ac or dc
F21V 23/06 - Arrangement of electric circuit elements in or on lighting devices the elements being coupling devices
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
Desk top items with LEDs also include USB-unit(s) or USB-module(s) and, optionally, additional outlet-units, to supply charging power to other electric or digital devices such as a smart phone or digital data device. The USB-unit(s) or USB-module(s) are arranged to supply power only, and do not have an additional USB data transfer function.
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 8/00 - Lighting devices intended for fixed installation
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
A device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, light device connected to unlimited power source by prongs or a base that can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a webcam having auto tracking functions and retractable prongs that plug directly into a wall outlet.
Desk top items with LEDs also include USB-unit(s) or USB-module(s) and, optionally, additional outlet-units, to supply charging power to other electric or digital devices such as a smart phone or digital data device. The USB-unit(s) or USB-module(s) are arranged to supply power only, and do not have an additional USB data transfer function.
F21S 8/08 - Lighting devices intended for fixed installation with a standard
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 8/00 - Lighting devices intended for fixed installation
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
Desk top items with LEDs also include USB-unit(s) or USB-module(s) and, optionally, additional outlet-units, to supply power to other electric or digital devices such as a smart phone or digital data device.
F21S 8/00 - Lighting devices intended for fixed installation
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 8/00 - Use of light guides, e.g. fibre optic devices, in lighting devices or systems
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
An LED bulb illuminates or projects images to both nearby and faraway areas. In addition, the LED bulb includes such features as three-dimensional adjustability, focus adjustment, and an extendable feature that enables components to be moved away from heat generated by the LED, and from blocking means that would interfere with operation of the components.
An LED light device with special effects utilizes persistence of vision theory to cause an LED(s) or LED array to change faster than the human eye response time of 1/16 to 1/24 second to display a special message, time, drawing, light patterns, or color changes. In addition, the light device may be provided with a sealed-unit arranged to receive a variety of eye-catching shades.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21S 8/00 - Lighting devices intended for fixed installation
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
G09F 9/33 - Indicating arrangements for variable information in which the information is built-up on a support by selection or combination of individual elements in which the desired character or characters are formed by combining individual elements being semiconductor devices, e.g. diodes
H05B 33/08 - Circuit arrangements for operating electroluminescent light sources
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
A projection assembly is arranged to be added onto or built into at least one LED-unit or other light-unit of an illuminated object that has more than one LED or other light source to cause the object to be illuminated and show the object's design or appearance while also offering illumination to people. The illuminated object may include all kinds of seasonal lighting, regular light fixtures, track lights, desktop lights, and battery operated lights having more than one light-unit or LED-unit.
A projection assembly is arranged to be added onto or built into at least one LED-unit or other light-unit of an illuminated object that has more than one LED or other light source to cause the object to be illuminated and show the object's design or appearance while also offering illumination to people. The illuminated object may include all kinds of seasonal lighting, regular light fixtures, track lights, desktop lights, and battery operated lights having more than one light-unit or LED-unit.
A device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, light device connected to unlimited power source by prongs or a base that can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a webcam having auto tracking functions and retractable prongs that plug directly into a wall outlet.
An LED device having a changeable image includes an LED light source, a kaleidoscope with a variety of constructions through which light from the LED light source is transmitted to form a kaleidoscopic image, an image changing mechanism or device for changing the position, orientation, and/or relationships of an inner-medium or media in the kaleidoscope to change the kaleidoscopic image, and a projection assembly for projecting the kaleidoscopic image to a surface such as a wall, ceiling, floor, or surface of an object.
An LED light has a built-in projection light and a night light to offer at least two functions for people in a dark environment. The projection light can project an image from any type of display-unit irrespective of geometric shape or image source or type, including display of digital data, wireless digital data, an LCD or TFT screen display, or any other display, enabling images of enlarged size to be projected onto a preferred surface, making it easier for people to see the image. The built-in night light helps people see things in a dark environment.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof
F21S 8/00 - Lighting devices intended for fixed installation
A lamp holder has a built-in night light. The lamp holder may be part of a light device that is assembled on a production line or may be purchased by people to add to an existing lighting devices lamp holder.
A device having built-in digital data means is powered by an unlimited power source for a lamp-holder, LED bulb, or light device connected to unlimited power source by prongs or a base that can be inserted into a socket that would otherwise receiving a bulb. The device may take the form of a webcam having auto tracking functions and retractable prongs that plug directly into a wall outlet.
A laser projection light has a light blocking wall and safety sensor to prevent people from directly looking into the laser beams to harm their eyes. The laser projection light may be an AC powered laser projection light or a DC powered battery operated unit, and may also incorporate a UL listed LED light device to that provides an LED light device function in addition to the projection function in case people do not want to see the laser projection light performance and wish to switch off the laser beam.
An LED lava light includes a motor, propeller, first magnetic element(s), second magnetic element(s), a freely movable base, LED(s), circuitry, and a controller, timer, sensor, trigger, and conductors to cause the propeller to rotate and liquid to flow, thereby causing inside miniature stuff to change position and provide splendid light effects. Toxic liquid and a heater are eliminated for greatly increased safety and reduced fire hazard.
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
An interchangeable power source light device has an AC power sealed-unit that fits into a uniform compartment of the light device housing. The AC power sealed-unit can be replaced by a DC power battery-pack, which also fits into the uniform compartment-means of the light device housing. The light device may have a built-in light source within the housing for connection with the sealed-unit or battery unit by to deliver electric signals from the sealed-unit or battery pack to the light source. Each sealed-unit and battery pack not only has its own power source, but also circuitry and a trigger, and optionally other light source(s) having low power consumption such as an LED(s), electro-luminescent (EL) element, organic LED, or organic EL element.
F21S 8/00 - Lighting devices intended for fixed installation
F21S 9/02 - Lighting devices with a built-in power supply; Systems employing lighting devices with a built-in power supply the power supply being a battery or accumulator
F21V 21/08 - Devices for easy attachment to a desired place
F21V 17/02 - Fastening of component parts of lighting devices, e.g. shades, globes, refractors, reflectors, filters, screens, grids or protective cages with provision for adjustment
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
G02F 1/13 - Devices or arrangements for the control of the intensity, colour, phase, polarisation or direction of light arriving from an independent light source, e.g. switching, gating or modulating; Non-linear optics for the control of the intensity, phase, polarisation or colour based on liquid crystals, e.g. single liquid crystal display cells
G03B 23/00 - Devices for changing pictures in viewing apparatus or projectors
F21V 14/00 - Controlling the distribution of the light emitted by adjustment of elements
F21S 10/00 - Lighting devices or systems producing a varying lighting effect
F21V 5/04 - Refractors for light sources of lens shape
F21V 23/00 - Arrangement of electric circuit elements in or on lighting devices
F21S 4/28 - Lighting devices or systems using a string or strip of light sources with light sources held by or within elongate supports rigid, e.g. LED bars
F21V 13/02 - Combinations of only two kinds of elements
F21V 14/06 - Controlling the distribution of the light emitted by adjustment of elements by movement of refractors
F21V 14/08 - Controlling the distribution of the light emitted by adjustment of elements by movement of screens
F21V 29/00 - Protecting lighting devices from thermal damage; Cooling or heating arrangements specially adapted for lighting devices or systems
F21K 9/232 - Retrofit light sources for lighting devices with a single fitting for each light source, e.g. for substitution of incandescent lamps with bayonet or threaded fittings specially adapted for generating an essentially omnidirectional light distribution, e.g. with a glass bulb
Desk top items with LEDs also include USB-unit(s) or USB-module(s) and, optionally, additional outlet-units, to supply power to other electric or digital devices such as a smart phone or digital data device.
H02M 1/00 - APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF - Details of apparatus for conversion
F21V 33/00 - Structural combinations of lighting devices with other articles, not otherwise provided for
F21V 23/02 - Arrangement of electric circuit elements in or on lighting devices the elements being transformers or impedances
G09F 23/00 - Advertising on or in specific articles, e.g. ashtrays, letter-boxes
F21S 8/00 - Lighting devices intended for fixed installation
H01R 13/66 - Structural association with built-in electrical component
H01R 25/00 - Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits
H01H 9/18 - Distinguishing marks on switches, e.g. for indicating switch location in the dark; Adaptation of switches to receive distinguishing marks
H01R 13/713 - Structural association with built-in electrical component with built-in switch the switch being a safety switch
H01R 24/76 - Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall
F21Y 101/02 - Miniature, e.g. light emitting diodes (LED)
F21V 23/04 - Arrangement of electric circuit elements in or on lighting devices the elements being switches
F21W 121/00 - Use or application of lighting devices or systems for decorative purposes, not provided for in groups
An LED light has a pinhole-imaging function for dark area use as a plug-in wall outlet light, direct current (DC) operated light, or interchangeable power source light to project a shaped image to a surrounding environment. Tiny shaped pinholes can create a fine image of desired message, data, logo, or time on a ceiling, walls, floor, optics means surface or other desired surface. At least one pinhole-means may be incorporated with an LED and parts selected from a housing-member, plastic film openings, cut-outs, transparent material piece, translucent material piece, adjust-means, sealed-unit, battery-pack, paper material, plastic material, metal material, wood material, geometric shape substrate, AC adaptor and jack means, and/or solar power or wind power generator to project the desired image, message, data, logo, to the surrounding environment, which may include any combination of ceiling, walls, floor, or other desired surfaces(s). The light may have an adjustable feature, interchangeable power source feature, dot-matrix geometric shape feature, and features to change position or orientation of the pinhole substrate or LED.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof
An LED night light for night time or dark area use may be arranged as a plug-in wall outlet night light or a direct current that includes projection features to project an image, message, data, logo, and/or time on a ceiling, walls, floor, or other desired surface. The LED night light incorporates optics selected from an optics-lens, convex lens, concave lens, openings, cut-outs, film, grating means, and/or hologram means to create the preferred image and project it to a desired location.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof
An LED projection night light for night time or dark area use includes a plug-in wall outlet night light or direct current operated night light with projection features to project an image, message, data, logo, or time on a ceiling, walls, floor, or other desired surface. The LED night light incorporates optics means such as an optics-lens, slides, openings, or cut-outs, and/or a transparent material piece, translucent material piece, telescope assembly, housing-member, slide-film, slide-disc, elastic-member, tilt-means, rotating-means, adjust-means, roller-means, mechanical-means, extend-means, convex lens, and/or concave lens designed to make the desired image, message, data, logo, or time project to the ceiling, walls, floor, or other desired surface to be seen by a viewer. The LED light has an interchangeable power source arrangement, permitting the night light to be selectively powered by either an AC powered sealed-unit or a DC powered battery-pack.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof
A projection assembly is arranged to be added onto or built into at least one LED-unit or other light-unit of an illuminated object that has more than one LED or other light source to cause the object to be illuminated and show the object's design or appearance while also offering illumination to people. The illuminated object may include all kinds of seasonal lighting, regular light fixtures, track lights, desktop lights, and battery operated lights having more than one light-unit or LED-unit.
An LED light device with special effects utilizes persistence of vision theory to cause an LED(s) or LED array to change faster than the human eye response time of 1/16 to 1/24 second to display a special message, time, drawing, light patterns, or color changes. In addition, the light device may be provided with a sealed-unit arranged to receive a variety of eye-catching shades.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof
An interchangeable power source light device has an AC power sealed-unit that fits into a uniform compartment of the light device housing. The AC power sealed-unit can be replaced by a DC power battery-pack, which also fits into the uniform compartment-means of the light device housing. The light device may have a built-in light source within the housing for connection with the sealed-unit or battery unit by to deliver electric signals from the sealed-unit or battery pack to the light source. Each sealed-unit and battery pack not only has its own power source, but also circuitry and a trigger, and optionally other light source(s) having low power consumption such as an LED(s), electro-luminescent (EL) element, organic LED, or organic EL element.
H01R 33/00 - Coupling devices specially adapted for supporting apparatus and having one part acting as a holder providing support and electrical connection via a counterpart which is structurally associated with the apparatus, e.g. lamp holders; Separate parts thereof